[code][code]Default user name and password both are “admin”; if you want to change them, please go to 
“Management” ?? “Access control”??“Passwords”.

Web Setup
Choose “Advanced Setup”??”WAN”, you will enter the page of Wide Area Network (WAN) Setup, you will see the Figure 3-7
There are 7 PVC links in the WAN setup page, choose the right PVC according to your needs, and then click the edit button, you will enter the page of ATM PVC Configuration (See Figure 3-8).

Enter VPI/VCI value and service category which is provided by your ISP, click next to enter the next step. You will see the Figure 3-9.
?? Note:
The type of network protocol selected may be different in different areas, there are five types(Figure 3-9), so you should ask your ISP to acquire the local type of network protocol and Encapsulation mode.

After choosing the proper protocol, enter the correct parameters supported by your ISP. Enable the configurations, then you can surf on the Internet.
??
PPP over ATM (PPPoA)
If you select the protocol of PPP over ATM (PPPoA), you will see the Figure 3-10, enter the value
of user name and password which is provided by your ISP, after selecting other functions (often using the default setup), click the next button.
After that, the Figure 3-11 will appear. Turn on the selected functions according to your demands. Clicking the next button to enter the next step, you will see the Figure 3-12, finally click save to complete the configuration.
??
PPP over Ethernet (PPPoE)
If you select the protocol of PPP over Ethernet (PPPoE), you will see the Figure 3-13, enter the value of user name and password which is provided by your ISP, after selecting other functions (often using the default setup), click the next button.
You will see the Figure 3-14. Then turn on the selected functions according to your needs. Clicking the next button to enter the next step, you will see the Figure 3-15, finally click save to complete the configuration.
??
MAC Encapsulation Routing (MER)
If you select the protocol of MAC Encapsulation Routing (MER), you will see the page (Figure 3-16). Enter the parameter and the way which is provided by your ISP, then click the next button.
After that, Figure 3-17 will be available. You can select the functions according to your needs. Clicking the next button to enter the next step, you will see the Figure 3-18, finally click save to complete the configuration.
??
IP over ATM (IPoA)
If you select the protocol of IP over ATM (IPoA), the Figure 3-19 will display, enter the parameter and the way which is provided by your ISP, then click the next button.
You will see the page (Figure 3-20), then turn on the selected functions according to your needs. Clicking the next button to enter the next step, you will see the Figure 3-21, finally click save to complete the configuration.
??
Bridging
If you select the Bridging protocol, you just open the bridge service function options, you will see the Figure 3-22, then click the next button, you will see the Figure 3-23, press save to complete the configuration finally.
?? Note:
After you complete the settings, the new settings must be saved and the Router must be restarted for the settings to take effect. Please press the Save/Reboot button on the Figure 3-24 to restart.[/code][/code]
ÈÚÏ åã ÓÇÎÊ ˜Çä˜Ôä Ñæ ÊæÖíÍ ÏÇÏå.