چاپ صفحه - عدم شناسایی ناگهانی فلش

سلام
اول بگم که خودمم قبول دارم عنوانش یکمی ناجوره
دوم اینکه من یک فلش داشتم دو گیگ این به راحتی کار می کرد خیلی خوب ولی یک دفعه ای لینوکس تصمیم گرفت که با هاش کار نکنه البته یک ۱۶ گیگ دارم که اون هنوز خوب کار می کنه فلش رو که وصل می کنم هیچ اتفاقی نمی اوفته فلشم سالمه چون ویندوز(با سون امتحان کردم)می شناسه و باز میکنه کامپیوتر خودمم سالمه چون هم اون ۱۶ گیگی و هم رم ریدرم و هم دوربین همه رو می شناسه
البته بگم که با هیچ لینوکسی نمیشناسه و کلا هیچی نمی شناسه
خروجی lsusb

کد: [انتخاب]

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 09da:0006 A4 Tech Co., Ltd Optical Mouse WOP-35 / Trust 450L Optical Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

وخروجی lshal
[code]Dumping 85 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
info.callouts.add = {'hal-storage-cleanup-all-mountpoints'} (string list)
info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement'} (string list)
info.product = 'Computer' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/computer' (string)
org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
org.freedesktop.Hal.version = '0.5.13' (string)
org.freedesktop.Hal.version.major = 0 (0x0) (int)
org.freedesktop.Hal.version.micro = 13 (0xd) (int)
org.freedesktop.Hal.version.minor = 5 (0x5) (int)
power_management.acpi.linux.version = '20090521' (string)
power_management.can_hibernate = true (bool)
power_management.can_suspend = false (bool)
power_management.can_suspend_hybrid = false (bool)
power_management.is_powersave_set = false (bool)
power_management.quirk.dpms_on = true (bool)
power_management.quirk.dpms_suspend = true (bool)
power_management.quirk.vbe_post = true (bool)
power_management.quirk.vbemode_restore = true (bool)
power_management.quirk.vbestate_restore = true (bool)
power_management.quirk.vga_mode_3 = true (bool)
power_management.type = 'acpi' (string)
system.board.product = 'GA-8S650GXM' (string)
system.board.serial = '' (string)
system.board.vendor = 'Gigabyte Technology Co., Ltd.' (string)
system.board.version = '' (string)
system.chassis.manufacturer = '' (string)
system.chassis.type = 'Desktop' (string)
system.firmware.release_date = '10/09/2003' (string)
system.firmware.vendor = 'Award Software International, Inc.' (string)
system.firmware.version = 'FB' (string)
system.formfactor = 'desktop' (string)
system.hardware.primary_video.product = 25381 (0x6325) (int)
system.hardware.primary_video.vendor = 4153 (0x1039) (int)
system.hardware.product = '' (string)
system.hardware.serial = '' (string)
system.hardware.uuid = '' (string)
system.hardware.vendor = '' (string)
system.hardware.version = '' (string)
system.kernel.machine = 'i686' (string)
system.kernel.name = 'Linux' (string)
system.kernel.version = '2.6.31-14-generic' (string)
system.kernel.version.major = 2 (0x2) (int)
system.kernel.version.micro = 31 (0x1f) (int)
system.kernel.version.minor = 6 (0x6) (int)

udi = '/org/freedesktop/Hal/devices/net_computer'
info.capabilities = {'net'} (string list)
info.category = 'net' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_computer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/devices/virtual/net/ppp0' (string)
net.address = '00:00:00:00:00:00' (string)
net.arp_proto_hw_id = 512 (0x200) (int)
net.interface = 'ppp0' (string)
net.linux.ifindex = 2 (0x2) (int)
net.originating_device = '/org/freedesktop/Hal/devices/computer' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'button', 'input.keys'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string)
input.device = '/dev/input/event0' (string)
input.product = 'Power Button' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'pc105' (string)
input.xkb.options = 'lv3:ralt_switch' (string)
input.xkb.rules = 'base' (string)
linux.device_file = '/dev/input/event0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
button.has_state = false (bool)
button.type = 'sleep' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'button', 'input.keys'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Sleep Button' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string)
input.device = '/dev/input/event2' (string)
input.product = 'Sleep Button' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'pc105' (string)
input.xkb.options = 'lv3:ralt_switch' (string)
input.xkb.rules = 'base' (string)
linux.device_file = '/dev/input/event2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'button', 'input.keys'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string)
input.device = '/dev/input/event1' (string)
input.product = 'Power Button' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'pc105' (string)
input.xkb.options = 'lv3:ralt_switch' (string)
input.xkb.rules = 'base' (string)
linux.device_file = '/dev/input/event1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1' (string)

udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Intel(R) Celeron(R) CPU 2.40GHz' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string)
linux.acpi_path = '/proc/acpi/processor/CPU0' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = false (bool)
processor.number = 0 (0x0) (int)

udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
alsa.device_file = '/dev/snd/timer' (string)
alsa.type = 'timer' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Timer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string)
linux.device_file = '/dev/snd/timer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/timer' (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
info.capabilities = {'oss'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'OSS Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string)
linux.device_file = '/dev/sequencer2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2' (string)
oss.device_file = '/dev/sequencer2' (string)
oss.type = 'sequencer' (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
info.capabilities = {'oss'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'OSS Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string)
linux.device_file = '/dev/sequencer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/sequencer' (string)
oss.device_file = '/dev/sequencer' (string)
oss.type = 'sequencer' (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
alsa.device_file = '/dev/snd/seq' (string)
alsa.type = 'sequencer' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string)
linux.device_file = '/dev/snd/seq' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/seq' (string)

udi = '/org/freedesktop/Hal/devices/net_computer_loopback'
info.capabilities = {'net', 'net.loopback'} (string list)
info.category = 'net.loopback' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Loopback device Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/devices/virtual/net/lo' (string)
net.address = '00:00:00:00:00:00' (string)
net.arp_proto_hw_id = 772 (0x304) (int)
net.interface = 'lo' (string)
net.linux.ifindex = 1 (0x1) (int)
net.originating_device = '/org/freedesktop/Hal/devices/computer' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
info.capabilities = {'input', 'input.mouse'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Macintosh mouse button emulation' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string)
input.device = '/dev/input/event3' (string)
input.product = 'Macintosh mouse button emulation' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/virtual/input/input3/event3' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNPb006'
info.linux.driver = 'mpu401' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'MPU401 compatible' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNPb006' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0d' (string)
pnp.description = 'MPU401 compatible' (string)
pnp.id = 'PNPb006' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNPb02f'
info.linux.driver = 'ns558' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Joystick/Game port' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNPb02f' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0c' (string)
pnp.description = 'Joystick/Game port' (string)
pnp.id = 'PNPb02f' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
info.linux.driver = 'i8042 kbd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0b' (string)
pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string)
pnp.id = 'PNP0303' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
info.linux.driver = 'parport_pc' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ECP printer port' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0401' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string)
pnp.description = 'ECP printer port' (string)
pnp.id = 'PNP0401' (string)

udi = '/org/freedesktop/Hal/devices/ppdev_parport0'
info.capabilities = {'ppdev'} (string list)
info.category = 'ppdev' (string)
info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0401' (string)
info.product = 'Parallel Port Device' (string)
info.subsystem = 'ppdev' (string)
info.udi = '/org/freedesktop/Hal/devices/ppdev_parport0' (string)
linux.device_file = '/dev/parport0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'ppdev' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0a/ppdev/parport0' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'
info.linux.driver = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '16550A-compatible COM port' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:09' (string)
pnp.description = '16550A-compatible COM port' (string)
pnp.id = 'PNP0501' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_1'
info.capabilities = {'serial'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string)
info.product = '16550A-compatible COM port' (string)
info.subsystem = 'tty' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_1' (string)
linux.device_file = '/dev/ttyS1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:09/tty/ttyS1' (string)
serial.device = '/dev/ttyS1' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string)
serial.port = 1 (0x1) (int)
serial.type = 'platform' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
info.linux.driver = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '16550A-compatible COM port' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:08' (string)
pnp.description = '16550A-compatible COM port' (string)
pnp.id = 'PNP0501' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
info.capabilities = {'serial'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string)
info.product = '16550A-compatible COM port' (string)
info.subsystem = 'tty' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0' (string)
linux.device_file = '/dev/ttyS0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:08/tty/ttyS0' (string)
serial.device = '/dev/ttyS0' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string)
serial.port = 0 (0x0) (int)
serial.type = 'platform' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PC standard floppy disk controller' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0700' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:07' (string)
pnp.description = 'PC standard floppy disk controller' (string)
pnp.id = 'PNP0700' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Math Coprocessor' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:06' (string)
pnp.description = 'Math Coprocessor' (string)
pnp.id = 'PNP0c04' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT-style speaker sound' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:05' (string)
pnp.description = 'AT-style speaker sound' (string)
pnp.id = 'PNP0800' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
info.linux.driver = 'rtc_cmos' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT Real-Time Clock' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:04' (string)
pnp.description = 'AT Real-Time Clock' (string)
pnp.id = 'PNP0b00' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT DMA Controller' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:03' (string)
pnp.description = 'AT DMA Controller' (string)
pnp.id = 'PNP0200' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:02' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PCI Bus' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:01' (string)
pnp.description = 'PCI Bus' (string)
pnp.id = 'PNP0a03' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Board' (string)

ابونتو نسخه چنده ؟ با دستور fdisk -l هم نتونستید ببینید . این جور چیزها تو ابونتو کاملا طبیعی هستش عادت می کنید . خروجی ها رو بدید

سلام
۹.۱۰ کوبونتو البته با توزیع های دیگه هم امتحان کردم هیچ کدوم نشناخت یک خطایی به شماره read 64 erorr -32 میده نمی دونم یعنی چی شما فکر نمی کنید از سخت افزار باشه ؟ اما در مورد fdisk اصلا خروجی نداره !یعنی حتی هاردمم تشخیص نمی ده وقتی عادی اجراش می کنم می گه که یکی از وارتیشن تیبل ها ایراد داره این fdisk مهم نیست فلش رو یکی بگه چی کار کنم

آن مانت کنید و با دستور fcsk بدید درستش کنه .

انجمن‌های فارسی اوبونتو

کمک و پشتیبانی => انجمن عمومی => نویسنده: سید وحید رضا برهانی در 17 فروردین 1389، 07:00 ق‌ظ