من یک مودم Shiro از نوع USB دارم. می خواستم با کمک شما دوستان عزیز نصبش کنم.
ورژن اوبونتو من 10.04 است و در ضمن از scanModem هم استفاده کردم ولی از محتوای فایل خروجیش زیاد سر در نیاوردم.
محتوای فایل خروجیش رو در زیر قرار می دم. می خواستم بدونم نوع چیپست مودمم چیه.
Only plain text email is forwarded by the Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.32-21-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.21
Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010
scanModem update of: 2010_05_29
Distrib_ID=Ubuntu
DistribCodeName=lucid
The dkms driver upgrade utilities are installed,
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
cdc_acm snd_hda_intel
Attached USB devices are:
ID 0572:1328 Conexant Systems (Rockwell), Inc.
ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive
ID 8087:0020
ID 413c:8160 Dell Computer Corp.
ID 413c:8162 Dell Computer Corp.
ID 413c:8161 Dell Computer Corp.
ID 0c45:641d Microdia
ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
ID 8087:0020
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@linmodems.org
Candidate PCI devices with modem chips are:
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
High Definition Audio cards can host modem chips.
For candidate card in slot 00:16.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:16.0 8086:3b64 1028:0434 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller
Modem interrupt assignment and sharing:
25: 0 0 0 0 HPET_MSI-edge hpet3
--- Bootup diagnostics for card in PCI slot 00:16.0 ----
[ 0.546040] pci 0000:00:16.0: reg 10 64bit mmio: [0xf0705800-0xf070580f]
[ 0.546101] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.546106] pci 0000:00:16.0: PME# disabled
The PCI slot 00:16.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
if help is needed.
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:3b56 1028:0434 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio
Modem interrupt assignment and sharing:
22: 298 361 292 361 IO-APIC-fasteoi HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.546309] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0700000-0xf0703fff]
[ 0.546369] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.546373] pci 0000:00:1b.0: PME# disabled
[ 15.499252] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 15.499310] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.613833] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
if help is needed.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 002:
Modem chipset detected on
SLOT="Bus 002 Device 004:"
NAME="Conexant Systems (Rockwell), Inc. "
bus=002
USBmodemID=0572:1328
IDENT=dgcmodem
Driver=dgcmodem
For a detailed USB cellphone usage report, see http://linmodems.technion.ac.il/bigarch/archive-eighth/msg03240.html
For candidate modem in: 002
Conexant Systems (Rockwell), Inc.
Primary device ID: 0572:1328
Support type needed or chipset: dgcmodem
Writing DOCs/Intel.txt
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
The modem requires a dgcmodem package.
For all code packages from Linuxant.com, either a driver set matching the boot kernel will be installed,
or the drivers will first be compiled and then installed. The expert on modem software for Linux is
"Support (Jonathan)" <modem.support@linuxant.com>
From http://www.linuxant.com/drivers/dgc/downloads-ubuntu-x86.php
download dgcmodem-7.80.02.06full_k2.6.32_21_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip dgcmodem*.zip
Then install with:
$ sudo dpkg -i dgcmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
The directions following below need only be pursued, if the above procedures are not adequate.
002
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Predictive diagnostics for card in bus 00:16.0:
Modem chipset not detected on
NAME="Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller "
CLASS=0780
PCIDEV=8086:3b64
SUBSYS=1028:0434
IRQ=5
HDA2=00:1b.0
For candidate modem in: 00:16.0
0780 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller
Primary device ID: 8086:3b64
Support type needed or chipset:
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset not detected on
NAME="Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio "
CLASS=0403
PCIDEV=8086:3b56
SUBSYS=1028:0434
IRQ=22
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio
Primary device ID: 8086:3b56
Support type needed or chipset:
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.3
and the compiler used in kernel assembly: 4.4.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.32-21-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
مودمت dgc هست.
از همون سایت linuxant درایورش رو بگیر
با تشکر از شما.
من به آدرس زیر رفتم اما کرنلی که با کرنل اوبونتو من یکی باشد پیدا نکردم. حال باید چه کنم؟
http://www.linuxant.com/drivers/dgc/downloads-ubuntu-x86.php
سلام
خروجیه
plog
رو یزارید
سلام.
خروجی plog این است:
Nov 8 10:13:57 babak-laptop pppd[1351]: pppd 2.4.5 started by root, uid 0
Nov 8 10:13:58 babak-laptop chat[1353]: Can't get terminal parameters: Input/output error
Nov 8 10:13:58 babak-laptop pppd[1351]: Script /usr/sbin/chat -v -f /etc/chatscripts/test finished (pid 1352), status = 0x2
Nov 8 10:13:58 babak-laptop pppd[1351]: Connect script failed
Nov 8 10:13:59 babak-laptop pppd[1351]: Exit.
Nov 8 10:16:31 babak-laptop pppd[1363]: pppd 2.4.5 started by root, uid 0
Nov 8 10:16:32 babak-laptop chat[1365]: Can't get terminal parameters: Input/output error
Nov 8 10:16:32 babak-laptop pppd[1363]: Script /usr/sbin/chat -v -f /etc/chatscripts/test finished (pid 1364), status = 0x2
Nov 8 10:16:32 babak-laptop pppd[1363]: Connect script failed
Nov 8 10:16:33 babak-laptop pppd[1363]: Exit.