من یک مودم SoftV92 data fax modem دارم که تو اوبنوتو نصب نمیشه. از طریق روشی که تو ویکی بود هم رفتم ولی همیشه یک علامت خطر کنار علامت نتورک میاد. حالا باید چه کار کنم؟!دوست عزیز ابتدا به آدرس http://linmodems.technion.ac.il/Farsi/ یه سری بزن،
cd ~/Descktop
gunzip scanModem.gz
sudo chmod +x scanModem
sudo ./scanModemابزار فوق اطلاعات مفیدی درباره نوع مودم و درایور اون و چگونگی نصب و راه اندازیش میده!
[Only plain text email is forwarded by the DISCUSS@linmodems.org List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry kernel 2.6.20-15-generic
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org .
Local Linux experts can be found through: http://www.linux.org/groups/index.html
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007
scanModem update of: 2007_August_19
ALSAversion 1.0.13
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
04:00.0 14f1:2f00 14f1:2004 Communication controller: Conexant HSF 56k HSFi Modem
Modem interrupt assignment and sharing:
15: 18217 0 IO-APIC-edge libata
--- Bootup diagnostics for card in PCI slot 04:00.0 ----
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 1458:a002 Audio device: Intel Corporation 82801G
Modem interrupt assignment and sharing:
16: 771 0 IO-APIC-fasteoi uhci_hcd:usb4, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 14.467133] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 14.467153] PCI: Setting latency timer of device 0000:00:1b.0 to 64
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
New HCF.HSF device 8086:27d8
For candidate modem in PCI bus: 00:1b.0
Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G
Primary PCI_id 8086:27d8
Support type needed or chipset: HCF.HSF
Writing Intel.txt
For owners of a Dell PCs with Conexant HSF modems, a generic package with full speed enabled is available, but requires driver compiling. Read Conexant.txt
The 14f1:2f00 chipset has a free support package: http://ubuntuforums.org/showthread.php?t=180632
Otherwise formal support for Conexant chipset modems is available ONLY through http://www.linuxant.com/drivers with a free trial package suporting minimal 14K speed, with purchase fo software key needed for full 56K service.
Read Conexant.txt for details and Modem/YourSystem.txt for follow through guidance. Driver speed is limited to 14,400 until a key is purchased
There are two support package types: hsfmodem and hcflinmodem for older HCF modems
http://www.lorenzobettini.it/linux/LinuxSonyVaioVGN-S5VP_B reports a
problem and solution in stalling a key, after testing of the free low
speed test package.
8086:27d8 could be either a HSF or HCF Conexant modem, because of ambiguous
use of the PCI ID by modem assemblers. First try the hcflinodem package.
If the installation aborts, then use the hsfmodem package. Read Conexant.txt
for details and Modem/YourSystem.txt for follow through guidance.
The hsfmodem package serves a great variety of Conexant chipset modems.
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem_VersionSpec_k2.6.20_15_generic_ubuntu_i386.deb.zip
with 2.6.20_15_generic equivalent to 2.6.20-15-generic, your kernel version.
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See Testing.txt for details.
Read Conexant.txt
Writing Conexant.txt
For candidate modem in PCI bus: 04:00.0
Class 0780: 14f1:2f00 Communication controller: Conexant HSF 56k HSFi Modem
Primary PCI_id 14f1:2f00
Support type needed or chipset: hsfmodem
For owners of a Dell PCs with Conexant HSF modems, a generic package with full speed enabled is available, but requires driver compiling. Read Conexant.txt
The 14f1:2f00 chipset has a free support package: http://ubuntuforums.org/showthread.php?t=180632
Otherwise formal support for Conexant chipset modems is available ONLY through http://www.linuxant.com/drivers with a free trial package suporting minimal 14K speed, with purchase fo software key needed for full 56K service.
Read Conexant.txt for details and Modem/YourSystem.txt for follow through guidance. Driver speed is limited to 14,400 until a key is purchased
There are two support package types: hsfmodem and hcflinmodem for older HCF modems
http://www.lorenzobettini.it/linux/LinuxSonyVaioVGN-S5VP_B reports a
problem and solution in stalling a key, after testing of the free low
speed test package.
The hsfmodem package serves a great variety of Conexant chipset modems.
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem_VersionSpec_k2.6.20_15_generic_ubuntu_i386.deb.zip
with 2.6.20_15_generic equivalent to 2.6.20-15-generic, your kernel version.
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See Testing.txt for details.
Read Conexant.txt
Writing Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.2
and the compiler used in kernel assembly: 4.1.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.20-15-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default.
If a driver compilation files with message including some lack of some FileName.h (stdio.h for example.
Some additional kernel-header files need installation to /usr/include.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
$ sudo apt-get -s install linux-kernel-devel
While some of the files may be on the install CD, others may have to be found through http://packages.ubuntu.com
For Ubunut feisty, additional packages required were:
build-essential curl debhelper dpkg-dev g g4.1 gettext git-core gitk
html2text intltool-debian kernel-package kernel-wedge libc6-dev
libcurl3-gnutls libdigest-sha1-perl liberror-perl libstdc4.1-dev
linux-libc-dev po-debconf rcs tcl8.4 tk8.4
Checking pppd properties:
-rwsr-xr-- 1 root dip 269224 2007-04-05 07:11 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth0:avah
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines
برای باز کردن زیپ:
$ unzip hsfmodem*.zip
جهت نصب درایور:
$ sudo dpkg -i hsfmodem*.deb
پیکربندی برنامه دایالر
$ sudo wvdialconf /etc/wvdial.conf
با دستور زیر یه فایل باز میشه و باید در اون شماره تلفن یوزر و پسورد رو در جای مناسب قرار بدید.:
$ sudo gedit /etc/wvdial.conf
برای کانکت شدن هم فرمان زیر رو بزن:
$ sudo wvdial
برای اطلاع بیشتر درباره wvdial (http://wiki.ubuntu-ir.org/wvdial) به http://wiki.ubuntu-ir.org/wvdial مراجعه کنید. سلاماین درایور ها مخصوصا اوبونتو ۷/۰۴ هستن :o
من هم درايور كمپاني Dell و گرفتم ولي زمان نصب با 2كليك قفل مي كنه
و با دستور dpkg -i يه چيز هايي از kernel ميگه با توجه به اينكه يوبنتو من 6.06 هست لطفا يكي بگه چه كار مي تونم بكنم
البه پيشاپيش از پيگيريهاتون ممنون هستم .
سلامبه نظر نمیاد که conexant باشه چون خود برنامه scanModem اینطور گفته:
تا اونجایی که من فهمیدم چیپست مودمتون conexant از نوع hsf هستش از درایور دل هم می تونین استفاده کنین : http://direct2dell.com/one2one/archive/2007/07/17/21325.aspx
Writing Smartlink.txt
"error: Dependency is not satisfiable : libC6
این یعنی یا درایور شما قدیمی هست یا اوبونتو . به هر حال به هم نمیخورن.
sudo apt-get install module-assistant
یک پکیج دیگه که هم لازم دارین glibc هست. برید و در ترمینال عبارت sudo apt-get install glibc رو وارد کنید ولی بعد از کلمه glibc هیج فاصله ای نزارید (یعنی space نزنید) و بعد ۲بار دکمه TAB کیبورد رو فشار بدید. خودش یک لیست برات میاره می گه چه ورژنش برای نصب آماده هست. حالا می تونید اسم اون ورژن رو وارد کنید و بزنید نصب بشه. (مثلاً اسم پکیج که برای من نصب شده glibc-2.3.5-0ubuntu1 هست. ممکنه برای شما با این متفاوت باشه)اگر ممکن هست ،نوع چیپست مودم و همینطور نسخه ی اوبونتو نصب شده رو بنویسید .کد: [انتخاب]"error: Dependency is not satisfiable : libC6این یعنی یا درایور شما قدیمی هست یا اوبونتو . به هر حال به هم نمیخورن.
شما مخازن اوبوتو رو کامل نکردین که این ارور رو گرفتین. اینجا رو نگاه کنید و کارهایی که توش گفته رو انجام بدید و بعد دوباره با دستوری که بهتون گفتم module-assistant و glibc رو نصب کنید:
http://wiki.ubuntu-ir.org/Repositories/UbuntuFeisty?highlight=%28repositories%29
sudo apt-get install sl-modem-daemonببینید چی میشه. بعدش که این دستور رو اجرا کردین. دستور زیر رو هم اجرا کنید:sudo /etc/init.d/sl-modem-daemon restartsudo wvdialconfsudo apt-get install build-essential linux-headers-$(uname -r) sudo dpkg -i gcc-3.4-base_3.4.4-6ubuntu8_i386.deb
sudo dpkg -i cpp-3.4_3.4.4-6ubuntu8_i386.deb
sudo dpkg -i gcc-3.4_3.4.4-6ubuntu8_i386.deb
sudo dpkg -i g++-3.4-3.4.4-6ubuntu8_i386.debsudo module-assistant auto-install sl-modem
sudo depmod -asudo modprobe slamrsudo /etc/init.d/sl-modem-daemon restartsudo wvdialconf