انجمنهای فارسی اوبونتو
کمک و پشتیبانی => سختافزار => نصب و پیکربندی انواع مودم و اتصال به اینترنت => نویسنده: FSG در 11 بهمن 1386، 10:48 بظ
-
من از scan Modem استفاده کردم اما نمی دونم نوع مودم چیه؟ ???
اینم کپی فایل scanModem.txt
Only plain text email is forwarded by the Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.22-14-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Your contry's local Linux experts
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007
scanModem update of: 2008_01_22
There are no blacklisted modem drivers in /etc/modprobe* files
PCI slot 00:1b.0 has a High Definition Audio Card
The Advanced Linux Sound Architecture (ALSA) packages providing audio support,
also includes drivers for some modems. The ALSA diagnostics are written during
bootup to /proc/asound/ folders.
---ALSA bootup diagnostics ---
The /proc/asound/ audio+modem diagostics are being copied.
Finished copy to Modem/ALSAbaner.tgz
The ALSA verion is 1.0.14
The modem cards detected by "aplay -l" are:
The /proc/asound/pcm file reports:
-----------------------
00-01: CMI9880 Digital : CMI9880 Digital : playback 1
00-00: CMI9880 : CMI9880 : playback 1 : capture 2
01-00: SAA7134 PCM : SAA7134 PCM : capture 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xcdcf8000 irq 16
1 [SAA7134 ]: SAA7134 - SAA7134
saa7130[0] at 0xcddefc00 irq 17
USB modem not detected by lsusb
For candidate card in slot 01:0a.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:0a.0 14f1:1056 14f1:1056 Communication controller: Conexant HCF 56k Data/Fax/Voice/Spkp Modem
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 01:0a.0 ----
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:2668 1043:81a6 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW
Modem interrupt assignment and sharing:
16: 869 IO-APIC-fasteoi uhci_hcd:usb4, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 35.021941] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 35.021965] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 152.132760] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 42.226223] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
[ 42.226245] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 42.226252] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 157.241053] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 38.256714] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
[ 38.256735] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 38.256743] PCI: Setting latency timer of device 0000:00:1b.0 to 64
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
if help is needed.
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
For candidate modem in PCI bus: 00:1b.0
Class 0403: 8086:2668 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW
Primary PCI_id 8086:2668
Subsystem PCI_id 1043:81a6
Softmodem codec or chipset from diagnostics:
from Archives:
Lacking a dsp (digital signal processing) chip, the modem is a software
intensive or "softmodem" type. Its primary controller manages the traffic
with the CPU. But the software needed is specified in the Subsystem.
-----------------------------------------
Support type needed or chipset:
Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.
2) An ALSA modem driver plus slmodemd. Read Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.1.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/
----------------end Softmodem section --------------
Writing Intel.txt
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read Conexant.txt
Read Conexant.txt
Writing Conexant.txt
Writing Smartlink.txt
============ end Smartlink section =====================
For candidate modem in PCI bus: 01:0a.0
Class 0780: 14f1:1056 Communication controller: Conexant HCF 56k Data/Fax/Voice/Spkp Modem
Primary PCI_id 14f1:1056
Support type needed or chipset: hcflinmodem
----------------end Softmodem section --------------
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read Conexant.txt
Read Conexant.txt
Writing Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.3
and the compiler used in kernel assembly: 4.1.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.22-14-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed package
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 23:27 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
-
این کاری که توی ویکی نوشتن رو امتحان بکنین:http://wiki.ubuntu-ir.org/DialupModemHowto/Alsa
-
این کاری که توی ویکی نوشتن رو امتحان بکنین:http://wiki.ubuntu-ir.org/DialupModemHowto/Alsa
ببخشی galeon جان ولی در مورد مودم های conexant، نه درایور ALSA و نه درایور Intel باهاشون سازگار نیست و فقط می تونه از درایور خود conexant استفاده کنه (به محتویات ModemData.txt که گفته می تونید از درایور های ALSA و Intel استفاده کنید توجه نکنید )
نوع چیپست مودم شما conexant HCF هست که شما می تونید درایورش رو از سایت DELL دانلود کنید. نسخه اوبونتوی شما کدوم هست ؟ 7.10 (یا همون Gutsy ) یا که 7.04 (یا همون Feisy) ؟ که لینکش رو براتون بزارم.
-
آخ که الهی هر چی خدا می خوای بهت بده. اوبونتو gutsyهست.
-
خب اینم (http://linux.dell.com/files/ubuntu/modem-drivers/hsf-custom/hsfmodem_7.68.00.06tst1oem-1_i386.deb) از درایور مورد نظرتون ;)
انشالله که بدون مشکل نصب بشه.
-
آقا خیلی خیلی ممنون
الان initialization مودم اوکی شده. اما یه مشکلی که داره اینه که پیام ارور می زنه : Configuration does not specify a valid login name
Configuration does not specify a valid password
آیا این مربوط به اطلاعات کانکشنه که بهش وارد کردم؟ چون اطلاعات کارتی که وارد کردم درسته و تو ویندوز با همین حساب کانکت می شم اما اونجا این پیام را می ده. باید اطلاعات دیگه ای وارد کنم؟ ???
-
اطلاعات رو تو فایل wvdial.conf وارد کنید
sudo gedit /etc/wvdial.conf
تغییرات رو ذخیره کنید ، با دستور زیر کانکشن رو ایجاد کنید
sudo wvdial
اگه بازم همون error ها رو گرفتین ،احتمالا خطوط مربوط به username و password ، به صورت زیر
; Password = *****
; Username = *****
; را از اول اون خط ها بردارید و تغییرات رو ذخیره کنید .
-
ممنون از راهنماییتون. بالاخره من تونستم از اوبونتو به نت وصل شم. \\:D/
فقط یه سوالی دارم از کجا یا بوسیله چه دستوری سرعت نت را ببینم و همچنین دیسکانت کنم؟
-
ممنون از راهنماییتون. بالاخره من تونستم از اوبونتو به نت وصل شم. \\:D/
فقط یه سوالی دارم از کجا یا بوسیله چه دستوری سرعت نت را ببینم و همچنین دیسکانت کنم؟
خب به سلامتی :)
برای دیسکانت شدن کافیه دستور زیر رو وارد کنید:
poff
در مورد سرعت کانکشن هم راحتترین راه اینه که وقتی به نت وصل شدین، برنامه netspeed رو به صورت زیر نصب کنید:
sudo apt-get install netspeed
و بعد یک applet به panel بالای صفحه می تونید اضافه کنید که سرعت ارسال و دریافت شما از اینرنت رو به صورت لحظه به لحظه نشون می ده ( و خیلی کارای دیگه)
-
poff را وارد می کنم ُاین میاد:
/usr/bin/poff: /bin/kill failed. None stopped
.
netspped را هم ییدا نمی کنه
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package netspeed
-
نباید اینطوری باشه ! دستور زیر رو هم امتØان کنید:
sudo poff
netspped را هم†ییدا نمی کن
دقت کنید دوست عزیز، netspeed نه netspped ! در ضمن شما مخازنتون رو تکمیل کردین دیگه ؟