با تشکر فراوان از آقای سید مهدی کل ماجرا اینه:
farshad@ubuntu:~$ sudo eciadsl-start
[EciAdsl 1/5] Setting up USB support...
Preliminary USB device filesystem is missing... trying to mount
Loading tun/tap module...
tun loaded successfully
[EciAdsl 2/5] Uploading firmware...
Process skipped .. no more needed
firmware loaded successfully
[EciAdsl 3/5] Synchronization...
OK eciadsl-synch: success
Synchronization successful
[EciAdsl 4/5] Connecting to provider...
Connection successful
[EciAdsl 5/5] Setting up route table...
Waiting for tap0...
ERROR: couldn't set your static IP or your external gateway
If you don't use PPPoE, please check your configuration.
farshad@ubuntu:~$ sudo pppoeconf
/usr/sbin/pppoeconf: 520: modconf: not found
/usr/sbin/pppoeconf: 520: modconf: not found
/usr/sbin/pppoeconf: 520: modconf: not found
/usr/sbin/pppoeconf: 520: modconf: not found
/usr/sbin/pppoeconf: 520: modconf: not found
farshad@ubuntu:~$ sudo eciadsl-doctor
You are using linux kernel version 2.6.22-14-rt
Support for USB is OK
Preliminary USB device filesystem is OK
dabusb module is not loaded: OK
UHCI support is not needed
OHCI support is OK
/dev/ppp is OK
HDLC support is OK
HDLC support is OK (no bug)
Loading EZ-USB firmware...
Process skipped .. no more needed
Loading the GlobeSpan firmware...
OK eciadsl-synch: success
You are using pppd version 2.4.4 (untested)
No existing PPP connection... trying to make one (please wait)
Couldn't get channel number: Input/output error
Script /usr/bin/eciadsl-pppoeci -vpi 0 -vci 33 -vendor 0x0915 -product 0x8104 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5792), status = 0x0
using channel 2
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Script /usr/bin/eciadsl-pppoeci -vpi 0 -vci 33 -vendor 0x0915 -product 0x8104 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5818), status = 0x0
Modem hangup
Connection terminated.
using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Script /usr/bin/eciadsl-pppoeci -vpi 0 -vci 33 -vendor 0x0915 -product 0x8104 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5841), status = 0x0
Modem hangup
Connection terminated.
using channel 4
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 0 -vci 33 -vendor 0x0915 -product 0x8104 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5864), status = 0x0
using channel 5
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Script /usr/bin/eciadsl-pppoeci -vpi 0 -vci 33 -vendor 0x0915 -product 0x8104 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5887), status = 0x0
Modem hangup
Connection terminated.
using channel 6
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Script /usr/bin/eciadsl-pppoeci -vpi 0 -vci 33 -vendor 0x0915 -product 0x8104 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5911), status = 0x0
Modem hangup
Connection terminated.
using channel 7
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Script /usr/bin/eciadsl-pppoeci -vpi 0 -vci 33 -vendor 0x0915 -product 0x8104 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5936), status = 0x0
Modem hangup
Connection terminated.
using channel 8
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Modem hangup
Connection terminated.
Script /usr/bin/eciadsl-pppoeci -vpi 0 -vci 33 -vendor 0x0915 -product 0x8104 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5959), status = 0x0
using channel 9
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Script /usr/bin/eciadsl-pppoeci -vpi 0 -vci 33 -vendor 0x0915 -product 0x8104 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 5983), status = 0x0
Modem hangup
Connection terminated.
using channel 10
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Script /usr/bin/eciadsl-pppoeci -vpi 0 -vci 33 -vendor 0x0915 -product 0x8104 -mode LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS finished (pid 6006), status = 0x0
Modem hangup
Connection terminated.
PPP: very bad ... usermode driver just crashed
farshad@ubuntu:~$