انجمنهای فارسی اوبونتو
کمک و پشتیبانی => سختافزار => نصب و پیکربندی انواع کارتهای گرافیک => نویسنده: Blossom در 29 اسفند 1386، 12:10 بظ
-
من نمی تونم نوی نوت بوکم ایفکت ها رو فعال کنم. به نظر میاد که گرافیک نصب نیست.
-
می تونی خروجی دستورهای زیر رو برامون بزاری ؟
lspci |grep -i vga
glxinfo |grep direct
-
این خدمت شما:
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
-
آقا کسی دیگه من رو راهنمایی نمی کنه؟
-
دوست عزیز سلام و ببخشید که دیر دارم پاسخ می دم چون تازه همین الان این پست و پست قبلیتون رو دیدم .
به اینترنت وصل شید و دستور زیر رو اجرا کنید:
sudo apt-get install xserver-xorg-video-intel
بعد خروجی دستور زیر رو برامون دوباره بزارین:
glxinfo |grep direct
-
آقا ما این بسته که فرمودین رو نصب کردیم. البته قبلش هم نصب بود و دوباره نصب کردیم. این هم نتیجه:
$ glxinfo |grep direct
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
-
دستور زیر رو وارد کنید:
sudo apt-get --reinstall install libgl1-mesa-glx
و بعد دستور زیر رو وارد کنید:
mkdir -p ~/.config/compiz/ && echo SKIP_CHECKS=yes >> ~/.config/compiz/compiz-manager
حالا خروجی دستورهای زیر رو برامون بزارین:
glxinfo |grep direct
و
compiz --replace ccp
-
دستور زیر رو وارد کنید:
sudo apt-get --reinstall install libgl1-mesa-glx
و بعد دستور زیر رو وارد کنید:
mkdir -p ~/.config/compiz/ && echo SKIP_CHECKS=yes >> ~/.config/compiz/compiz-manager
حالا خروجی دستورهای زیر رو برامون بزارین:
glxinfo |grep direct
و
compiz --replace ccp
آقا انجام شد. فقط این دستور آخر همچین هیچ کاری نمی کرد؛ با CTRL+C بستمش:
$ glxinfo |grep direct
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
OpenGL renderer string: Mesa GLX Indirect
$ compiz --replace ccp
Checking for Xgl: not present.
Blacklisted PCIID '8086:2a02' found
aborting and using fallback: /usr/bin/metacity
-
در اینجا (http://wiki.compiz-fusion.org/Hardware/Blacklist) متأسفانه گفته شده که کارت گرافیکی شما جزو مدل های لیست blacklist برنامه compiz هست. ولی باز با این حال شاید بشه کاری کرد به طریقی این برنامه رو روی سیستم شما فعال کرد ;)
خروجی دستور زیر رو برامون بزارین:
cat /etc/X11/xorg.conf
-
در اینجا (http://wiki.compiz-fusion.org/Hardware/Blacklist) متأسفانه گفته شده که کارت گرافیکی شما جزو مدل های لیست blacklist برنامه compiz هست. ولی باز با این حال شاید بشه کاری کرد به طریقی این برنامه رو روی سیستم شما فعال کرد ;)
خروجی دستور زیر رو برامون بزارین:
cat /etc/X11/xorg.conf
انگار شانس منه! پی سی من هم توان فعال شدنش رو نداشت!
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ir"
Option "XkbVariant" ","
Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 30-70
VertRefresh 50-160
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
-
در اینجا (http://wiki.compiz-fusion.org/Hardware/Blacklist) متأسفانه گفته شده که کارت گرافیکی شما جزو مدل های لیست blacklist برنامه compiz هست. ولی باز با این حال شاید بشه کاری کرد به طریقی این برنامه رو روی سیستم شما فعال کرد ;)
خروجی دستور زیر رو برامون بزارین:
cat /etc/X11/xorg.conf
انگار شانس منه! پی سی من هم توان فعال شدنش رو نداشت!
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ir"
Option "XkbVariant" ","
Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 30-70
VertRefresh 50-160
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
همچین چیز زیادیم از دست ندادی compiz اینقدر bug داره به همه جا گند میزنه که من پاکش کردم رفت
-
دستور های زیر رو اجرا کنید:
اول:
sudo apt-get remove xserver-xgl
sudo apt-get --purge remove xorg-driver-fglrx
بعد:
sudo apt-get install libgl1-mesa-dri
حالا دوباره خروجی دستور های زیر رو برامون بزارین:
glxinfo
compiz --replace ccp
-
دستور های زیر رو اجرا کنید:
اول:
sudo apt-get remove xserver-xgl
sudo apt-get --purge remove xorg-driver-fglrx
بعد:
sudo apt-get install libgl1-mesa-dri
حالا دوباره خروجی دستور های زیر رو برامون بزارین:
glxinfo
compiz --replace ccp
اون دو دستور اول که اجرا نشدن! انگار اینطور بسته هایی نصب نبود!
اما:
$ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGI_video_sync, GLX_SGIS_multisample,
GLX_SGIX_fbconfig
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 965GM 4.1.3002 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.0.1
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_fragment_program, GL_ARB_imaging,
GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_point_parameters,
GL_ARB_shadow, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_buffer_object,
GL_ARB_vertex_program, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_equation_separate,
GL_EXT_blend_func_separate, GL_EXT_blend_logic_op, GL_EXT_blend_minmax,
GL_EXT_blend_subtract, GL_EXT_clip_volume_hint, GL_EXT_cull_vertex,
GL_EXT_compiled_vertex_array, GL_EXT_convolution, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_histogram,
GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod_bias,
GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array,
GL_3DFX_texture_compression_FXT1, GL_APPLE_client_storage,
GL_APPLE_packed_pixels, GL_ATI_blend_equation_separate,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_OES_read_format,
GL_SGI_color_matrix, GL_SGI_color_table, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SUN_multi_draw_arrays
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x24 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x27 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x28 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x29 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x2a 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x2b 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x2c 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x2d 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x2e 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x2f 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x30 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x31 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x32 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x74 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 Ncon
و
$ compiz --replace ccp
Checking for Xgl: not present.
Blacklisted PCIID '8086:2a02' found
aborting and using fallback: /usr/bin/metacity
البته مجبورم با CTRL+C دستور رو قطع کنم.
-
خب فعلاً قسمت اول مشکل حل شه و الان راهانداز کارت گرافیکی تون درست نصب شد:
direct rendering: Yes
حالا خروجی دستور زیر رو برامون بزارین:
SKIP_CHECKS=yes compiz --replace
بعد قبل از اینکه ctrl+c رو بزنید از پنل بالا به مسیر System > Preferences > Appearance برید و افکت ها رو از داخل اونجا فعال کنید.
-
خب فعلاً قسمت اول مشکل حل شه و الان راهانداز کارت گرافیکی تون درست نصب شد:
direct rendering: Yes
حالا خروجی دستور زیر رو برامون بزارین:
SKIP_CHECKS=yes compiz --replace
بعد قبل از اینکه ctrl+c رو بزنید از پنل بالا به مسیر System > Preferences > Appearance برید و افکت ها رو از داخل اونجا فعال کنید.
خب افکت ها که فعال نشد و همون گفت که نمی تونه فعالش کنه. این دستور هم نیاز به CTRL+C نداشت و خودش کارش رو به پایان برد:
$ SKIP_CHECKS=yes compiz --replace
Checking for Xgl: not present.
Blacklisted PCIID '8086:2a02' found
SKIP_CHECKS is yes, so continuing despite problems.
Checking for texture_from_pixmap: not present.
Trying again with indirect rendering:
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1152x768) to maximum 3D texture size (2048): Passed.
Checking for nVidia: not present.
Checking for FBConfig: present.
Checking for Xgl: not present.
Starting gtk-window-decorator
/usr/bin/compiz.real (core) - Fatal: No GLXFBConfig for default depth, this isn't going to work.
/usr/bin/compiz.real (core) - Error: Failed to manage screen: 0
/usr/bin/compiz.real (core) - Fatal: No manageable screens found on display :0.0