Only plain text email is forwarded by the Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.22-14-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Your contry's local Linux experts
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007
scanModem update of: 2008_04_10
There are no blacklisted modem drivers in /etc/modprobe* files
USB modem not detected by lsusb
For candidate card in slot 02:08.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
02:08.0 127a:1025 127a:1025 Communication controller: Rockwell International HCF 56k Data/Fax/Voice/Spkp
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 02:08.0 ----
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 02:08.0:
Modem chipset detected on
CLASS="Class 0780: 127a:1025"
NAME="Communication controller: Rockwell International HCF 56k Data/Fax/Voice/Spkp "
PCIDEV=127a:1025
SUBSYS=127a:1025
IRQ=5
IDENT=HCF.HSF
For candidate modem in: 02:08.0
Class 0780: 127a:1025 Communication controller: Rockwell International HCF 56k Data/Fax/Voice/Spkp
Primary PCI_id 127a:1025
Support type needed or chipset: HCF.HSF
----------------end Softmodem section --------------
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read Conexant.txt
127a:1025 could be either a HSF or HCF Conexant modem, because of ambiguous
use of the PCI ID by modem assemblers. First try the hcflinodem package.
If the installation aborts, then use the hsfmodem package. Read Conexant.txt
for details and Modem/YourSystem.txt for follow through guidance.
The hsfmodem package serves a great variety of Conexant chipset modems.
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem_7.68.00.07full_k2.6.22_14_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See Testing.txt for details.
Read Conexant.txt
Writing Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.3
and the compiler used in kernel assembly: 4.1.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.22-14-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed package
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 23:27 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
peace@IQ:~$ sudo wvdial
WvDial<*1>: WvDial: Internet dialer version 1.56
WvDial<*1>: Initializing modem.
WvDial<*1>: Sending: ATZ
WvDial Modem<*1>: ATZ
WvDial Modem<*1>: OK
WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
WvDial Modem<*1>: OK
WvDial<*1>: Modem initialized.
WvDial<Err>: Configuration does not specify a valid phone number.
WvDial<Err>: Configuration does not specify a valid login name.
WvDial<Err>: Configuration does not specify a valid password.
Dialer Defaults]
Modem = /dev/ttySHSF0
Baud = 57600
Init = ATZ
Init2 = AT S11=50
Phone = 9718140
Username = aban85
Password = 2222
[Dialer phone2]
Phone = 9714018
[Dialer shh]
Init3 = ATM0
[Dialer tone]
Dial Command = ATDTgksudo gedit /etc/wvdial.confمحتویات فایلی که باز میشه رو اینجا قرار بده!
[Dialer Defaults]
Modem = /dev/ttySHSF0
Baud = 57600
Init = ATZ
Init2 = AT S11=50
Phone = 9718140
Username = aban85
Password = 2222
[Dialer phone2]
Phone = 9714018
[Dialer shh]
Init3 = ATM0
[Dialer tone]
Dial Command = ATDTاوه ظاهرا اون رو نوشتید ](*,)[Dialer phone2]
Phone = 9714018پاک کنید و دوباره امتحان کنید[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
; Phone = <Target Phone Number>
ISDN = 0
; Password = <Your Password>
New PPPD = yes
; Username = <Your Login Name>
Modem = /dev/modem
Baud = 460800 Only plain text email is forwarded by the Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.22-14-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Your contry's local Linux experts
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007
scanModem update of: 2008_04_10
The modem symbolic link is /dev/modem -> ttySHSF0
There are no blacklisted modem drivers in /etc/modprobe* files
USB modem not detected by lsusb
For candidate card in slot 02:09.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
02:09.0 14f1:1056 14f1:1056 Communication controller: Conexant HCF 56k Data/Fax/Voice/Spkp Modem
Modem interrupt assignment and sharing:
21: 82 IO-APIC-fasteoi hcfpcihw
--- Bootup diagnostics for card in PCI slot 02:09.0 ----
[ 43.052827] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 21
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 02:09.0:
Modem chipset detected on
CLASS="Class 0780: 14f1:1056"
NAME="Communication controller: Conexant HCF 56k Data/Fax/Voice/Spkp Modem "
PCIDEV=14f1:1056
SUBSYS=14f1:1056
IRQ=21
IDENT=hcflinmodem
For candidate modem in: 02:09.0
Class 0780: 14f1:1056 Communication controller: Conexant HCF 56k Data/Fax/Voice/Spkp Modem
Primary PCI_id 14f1:1056
Support type needed or chipset: hcflinmodem
----------------end Softmodem section --------------
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read Conexant.txt
Read Conexant.txt
Writing Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.3
and the compiler used in kernel assembly: 4.1.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.22-14-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed package
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 23:27 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 8 2008-04-14 20:06 /dev/modem -> ttySHSF0
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/00-hcfpci.rules:KERNEL=="ttySHCF0", SYMLINK="modem"
/etc/udev/rules.d/00-hsf.rules:KERNEL=="ttySHSF0", SYMLINK="modem"
Within /etc/modprobe.conf files:
/etc/modprobe.d/hsf.conflicts:install snd-via82xx-modem /bin/true # temporarily disabled by hsf - conflicts with hsfmc97via
/etc/modprobe.d/hsf.conflicts:install snd-atiixp-modem /bin/true # temporarily disabled by hsf - conflicts with hsfmc97ati
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/hcfpci.conflicts:install snd-via82xx-modem /bin/true # temporarily disabled by hcfpci - conflicts with hsfmc97via
/etc/modprobe.d/hcfpci.conflicts:install snd-atiixp-modem /bin/true # temporarily disabled by hcfpci - conflicts with hsfmc97ati
/etc/modprobe.d/hsf:alias /dev/modem /dev/ttySHSF
/etc/modprobe.d/hcfpci:alias /dev/modem /dev/ttySHCF
Within any ancient /etc/devfs files:
/etc/devfs/conf.d/hcfpci.conf:LOOKUP ^(ttySHCF[0-9]|modem$) EXECUTE nice /sbin/modprobe /dev/ttySHCF
/etc/devfs/conf.d/hcfpci.conf:REGISTER ^ttySHCF0$ CFUNCTION GLOBAL symlink $devname modem
/etc/devfs/conf.d/hcfpci.conf:UNREGISTER ^ttySHCF0$ CFUNCTION GLOBAL unlink modem
/etc/devfs/conf.d/hsf.conf:LOOKUP ^(ttySHSF[0-9]|modem$) EXECUTE nice /sbin/modprobe /dev/ttySHSF
/etc/devfs/conf.d/hsf.conf:REGISTER ^ttySHSF0$ CFUNCTION GLOBAL symlink $devname modem
/etc/devfs/conf.d/hsf.conf:UNREGISTER ^ttySHSF0$ CFUNCTION GLOBAL unlink modem
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
sudo wvdialconf /etc/wvdial.confدر صورت اجرای با موفقیت، دستور زیر رو اجرا کنید:gksudo gedit /etc/wvdial.confو در اون فایل علامت ;(نقطه ویرگول)رو از ابتدای اونهایی که مربوط به شماره تلفن و رمز عبور هست رو بردارwvdialخروجیه همه دستورات رو برای راهنمایی بیشتر اینجا قرار بدهخیلی ممنون از توجه همه دوستان ;)لااقل یه عبارت {حل شد} در انتهای عنوان قرار بدید، در ضمن میشه بگید چطور حل شد؟ :)
خدا رو شکر مشکل حل شد.