انجمن‌های فارسی اوبونتو
کمک و پشتیبانی => سخت‌افزار => نصب و پیکربندی انواع مودم و اتصال به اینترنت => نویسنده: amir89 در 10 خرداد 1387، 08:10 ق‌ظ
-
man modemam chipsetesho dorost nemidoonam chie too windows gashtam ino neveshte bood HDAUDIO V.92 Soft Data Fax Modem with SmartCP hala shoma komakam konid ke betoonam yejoori rash bendazam :'( montazere komaketoon hastam in shomarame .................. age kasi mitoonest komak kone baham tamas begire
-
سلام دوست عزیز
شما ابتدا باید مودم خودتون رو تو اوبونتو اسکن کنید تا نوع چیپ ست آن مشخص شود
برای این کار از استفاده کنید این راهنمایی (http://wiki.ubuntu-ir.org/DialupModemHowto/ScanModem?highlight=(scanmodem))
در ضمن سعی کنید که فارسی تایپ (http://wiki.ubuntu-ir.org/UbuntuPersianSupport) کنید ;)
فکر نکنم اجازه داشته باشید شماره خودتون رو اینجا بذارین
-
bebakhshid farsi nemitoonam akhe laptopam dokmehash barchasbe farsi nadaran baraye hamin nemitoonam babate shomare ham nemidoonam faghat baraye komak bood age ejaze nadashtam bebakhshid ;)
-
man raftam drivere wndowse modemamo didam driveresh conexant bood
-
amir89 جان سلام و به اوبونتو خوش اومدی.
قبل از هر چیز از نوشتن شماره تماس در سایت خودداری کنید. اینجا یک فروم عمومی هست و ما برای کمک کردن به همدیگه اینجا دور هم جمع شدیم نه اینکه توقع داشته باشیم مشکلاتمون رو کسی به صورت شخصی و خصوصی برامون حل کنه.
«پست شما ویرایش شد»
بر اساس لینک راهنمایی جناب iqson716 عمل کنید و از برنامه scanmodem استفاده کنید و محتویات فایل modemData.txt رو که این برنامه ایجاد می کنه رو برامون بزارین توی سایت.
-
inam modem datae scan modem
Only plain text email is forwarded by the Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.24-16-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Your contry's local Linux experts
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008
scanModem update of: 2008_05_02
The modem symbolic link is /dev/modem -> ttySL0
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 05ca:183b Ricoh Co., Ltd
ID 09da:000a A4 Tech Co., Ltd
USB modems not recognized
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:284b 104d:9005 Audio device: Intel Corporation 82801H
Modem interrupt assignment and sharing:
11: 0 0 IO-APIC-edge sonypi
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
PCI slot 00:1b.0 has a High Definition Audio Card
The ALSA verion is 1.0.15
The modem cards detected by "aplay -l" are:
The /proc/asound/pcm file reports:
-----------------------
about /proc/asound/cards:
------------------------
--- no soundcards ---
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
A candidate modem is not evident among the PCI devices:
------------------------------------------------
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G86M [GeForce 8400M GT] (rev a1)
06:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
08:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 16)
09:03.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
09:03.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
------------------------------------------------
with USB and bridge devices not displayed.
If your modem is connected by an external serial cable,
or mounted internally on an ISA card, scanModem would not access it.
Try with Root permission
$ sudo wvdialconf /etc/wvdial.conf
to detect these modem types and some USB modems.
If the detection is successful, read the wvdial.txt .
Edit the /etc/wvdial.conf with Root permission:
sudo gedit /etc/wvdial.conf
will be able to dial out with Root permission:
sudo wvdial
Many modems for which scanModem fails have Conexant chips.
From http://www.linuxant.com/drivers/modemident.php
get the ListModem tool, which will report on Conexant chipset modems
If the above tests fail, please provide any independent information available on your modem.
If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
Start > Settings > Control Panel > Classical View (for Window XP) > System
> Hardware > Device Manager > Modems > Click on the + > Modem. Double click to
expand the graphic. Manufacturer information may be displayed. For example, CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor
and device information.
Next do the Query Modem and record the ATI specifications displayed such as:
ATI3 - Agere SoftModem Version 2.1.22
ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.
The /proc/asound/ audio+modem diagostics are being copied.
Finished copy to Modem/ALSAamir.tgz
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset not detected on
CLASS="Class 0403: 8086:284b"
NAME="Audio device: Intel Corporation 82801H "
SUBSYS=104d:9005
PCIDEV=8086:284b
IRQ=11
HDA=8086:284b
SOFT=8086:284b.HDA
High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,
and many are supported by the ALSA audio+modem driver snd-hda-intel
A modem was not detected on HDA card 8086:284b.
If another modem card is present, then most likely 8086:284b does not host a modem.
If another modem card has not been detected, then possibilities are:
1) A Conexant modem chip is present on 8086:284b, as Conexant chips
are frequently not detectable by ALSA diagnostics
2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
sudo wvdialconf /etc/wvdial.conf
For candidate modem in: 00:1b.0
Class 0403: 8086:284b Audio device: Intel Corporation 82801H
Primary device ID: 8086:284b
Subsystem PCI_id 104d:9005
Softmodem codec or chipset from diagnostics:
from Archives:
Support type needed or chipset:
Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.
2) An ALSA modem driver plus slmodemd. Read Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.2.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/
----------------end Softmodem section --------------
Writing Intel.txt
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read Conexant.txt
Read Conexant.txt
Writing Conexant.txt
Writing Smartlink.txt
============ end Smartlink section =====================
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.2.3
and the compiler used in kernel assembly: 4.2.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.2
linuc_headers base folder /lib/modules/2.6.24-16-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default. When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed package
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 23:27 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 6 2008-05-31 17:05 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/10-local.rules:KERNEL=="536ep0", SYMLINK=="modem"
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
/etc/udev/rules.d/00-hsf.rules:KERNEL=="ttySHSF0", SYMLINK="modem"
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
/etc/modprobe.d/hsf:alias /dev/modem /dev/ttySHSF
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/hsf.conflicts:install snd-via82xx-modem /bin/true # temporarily disabled by hsf - conflicts with hsfmc97via
/etc/modprobe.d/hsf.conflicts:install snd-atiixp-modem /bin/true # temporarily disabled by hsf - conflicts with hsfmc97ati
Within any ancient /etc/devfs files:
/etc/devfs/conf.d/hsf.conf:LOOKUP ^(ttySHSF[0-9]|modem$) EXECUTE nice /sbin/modprobe /dev/ttySHSF
/etc/devfs/conf.d/hsf.conf:REGISTER ^ttySHSF0$ CFUNCTION GLOBAL symlink $devname modem
/etc/devfs/conf.d/hsf.conf:UNREGISTER ^ttySHSF0$ CFUNCTION GLOBAL unlink modem
Within ancient kernel 2.4.n /etc/module.conf files:
/etc/modules.conf:alias /dev/modem /dev/ttySHSF
--------- end modem support lines --------
-
متأسفانه این چندمین باری هست که میبینم این برنامه نتونسته مودم رو پیدا کنه. اطلاعات ویندوزتون میگه که مودم شما conexant هست و اطلاعات scanmodem میگه که شاید با راه‌انداز ALSA راه بیافته. برای اینکه ALSA رو تست کنید (خیلی راحت و سریع هست) CD اوبونتو رو توی دستگاه قرار بدید و اول دستور زیر رو وارد کنید و اینتر بزنید:
sudo apt-cdrom add
و بعد دستور زیر رو اجرا کنید:
sudo apt-get install sl-modem-daemon
و بعد خروجی دستور زیر رو برامون بزارین:
sudo wvdialconf
-
inam javabe dastoor
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wiki/?WvDial
If you still have problems, send mail to <wvdial-list@lists.nit.ca>.
-
chera kasi mara dar nemiabad
komakikonid be ma
-
مشکل اینجاست که برنامه scanmodem نتونسته درست مودم شما رو پیدا کنه و خود شما گفتید که مودم شما conexant هست (هرچند ظواهر چیز دیگه‌ای نشون میده). مودم های conexnat خودشون به ۲ نوع هستند HSF و HCF که خب بدیهی که درایوراشون با هم فرق می کنه. اگر می دونستید که مودم شما از کدوم نوع هست کار خیلی راحت‌تر بود. ولی حالا که نمی دونید شاید این راه براتون جواب بده:
در اوبونتو به اینترنت دسترسی دارین ؟ مثلاً با کارت شبکه یا وایرلس ؟ اگر دارین این فایل (http://www.linuxant.com/drivers/hcf/full/archive/cnxtinstall.run) رو دانلود کنید و بعد دستورات زیر رو اجرا کنید تا خودش بره و درایور مناسب سخت‌افزار شما رو (اگر conexant باشه - طبق گفته خودتون که توی ویندوز دیده‌اید) دانلود و نصب کنه:
وارد ترمینال بشید و از اونجا وارد فولدری که این فایل رو دانلود کردین بشید و دستور زیر رو اجرا کنید:
sudo sh cnxtinstall.run
وسط های کار یک رمز به شما میده و بعد پنجره فایرفاکس باز می کنه و در اون پنجره باز شده فایرفاکس شما باید username رو کلمه root و password رو اون کلمه‌ای که به شما داده وارد کنید. مسیر کار رو دنبال کنید تا انتها. بعد سیستم رو یکبار ری‌استارت کنید و بعد دستور زیر رو اجرا کنید:
wvdialconf
و خروجی رو برامون بزارین
-
bebakhshid man dastrasi be internet ba system amelamo joz windows nadaram
-
وارد محیط ویندوز بشید :
در حالی که مودمتون نصب هست ( مودمتون باید تو ویندوز نصب باشه) کار های زیر رو انجام بده:
حالا وارد My Copmuter شو سپس وارد درایو C حالا از سربرک 'گزینه search رو انتخاب کن و توش تایپ کن ListMdm_v1.6 یا ListMdm فولدری که پیدا کرد رو باز کن :
تو این فولدر که پیدا کردی ۴ تا فایل رو میبینی که باید unzip بشن و از حات فشرده در بیان
فیل هایی که میبینی : ListMdm.exe ,ListMdm.ini, SetupSys.inf, SetupSys.sys
روی ListMdm.exe کلیک کن Command Prompt باز می شه و یه خروجب بهت میده مثل عکسی که فرستادم
خروجی این فایل رو اینجا بذار
-
kheili bebakhshid man xp nadaram vista nasbe oonam searchesh ghatie hamchin chizio naiavorde baram
-
یه کاری کن. اگه مودمت conexant باشه یا از نوع hsf هست یا از نوع hcf. برای امتحان برو این فایل (http://www.linuxant.com/drivers/hsf/full/archive/hsfmodem-7.68.00.10full/hsfmodem_7.68.00.10full_k2.6.24_16_generic_ubuntu_i386.deb.zip) رو بگیر و از حالت فشرده دربیار و نصبش کن و متن خروجی دستور زیر رو برامون بزار:
wvdialconf