انجمن‌های فارسی اوبونتو

کمک و پشتیبانی => سخت‌افزار => نصب و پیکربندی انواع مودم و اتصال به اینترنت => نویسنده: ahmad در 09 تیر 1387، 12:24 ق‌ظ

عنوان: چگونگی نصب درایور مودم
ارسال شده توسط: ahmad در 09 تیر 1387، 12:24 ق‌ظ
با سلام
من مودم zoltrix smart spirit دارم . درایور آن برای لینوکس که در سایت شرکت زولتریکس قرار داشت را دانلود کردم . فایل درایور آن به صورت SmartDAA_Release.tar.gzمی باشد . حالا چند سوال داشتم از کاربرانی که اطلاع دارم خواهشمندم کمک کنند :
1- آیا با این فایل درایور مودم در ابونتو 8,04 نصب می شود و مودم به طور کامل شناسایی و قابل استفاده خواهد بود ؟
2- این درایور چگونه نصب می شود؟
باتشکر
اگر سوالاتم پیش پا افتاده است عذر خواهی می کنم چون من تازه با ابونتو آشنا شدم و اطلاعات زیادی در مورد آن ندارم .
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: iqson716 در 09 تیر 1387، 05:04 ب‌ظ
سلام دوست عزیز
شما برای اینکه نوع چیپ مودمتون تشخیص داده بشه باید از برنامه scanmodem استفاده کنید که توضیحات مفصل و فارسی را تو ویکی بخونید:
http://wiki.ubuntu-ir.org/DialupModemHowto/ScanModem (http://wiki.ubuntu-ir.org/DialupModemHowto/ScanModem)
بعد از تشخیص نوع چیپست اقدام به دانلود درایور و نصب اون بکنید.
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: ahmad در 10 تیر 1387، 12:35 ق‌ظ
با سلام
من به وسیله دستورات داده شده در انجمن  برنامه scan modem را اجرا کردم و دو فایل ذکر شده هم اجرا شد که محتویات آن به شرح ذیل است :
ابتدا 1stRead:

If you want help from the email group Discuss@linmodems.org, PLEASE join the List
at http://www.linmodems.org . Otherwise your messages will be delayed until the evening,
waiting for someone to verify it is not junk mail, before forwarding through the List server.
   
The files in this Modem/ folder have the following roles:

ModemData.txt - Diagnostics and accumulated information cogent to your modem and host system.
     This is the ONLY file which should be sent to the List  DISCUSS@LINMODEMS.ORG ,
     if further help is needed. Send your email and attachments as plain text as
     other formats are rejected by the List Server, to avoid virus transmission.
     Always send the ENTIRE ModemData.txt,  as It includes subtle diagnostic ouputs needed
     to best guide you. Please in the covering email mention your Country, to enable Country
     specific advice.
     Always use the most recent update of scanModem accessed ONLY at
      http://linmodems.technion.ac.il/packages/scanModem.gz
     to produce ModemData.txt
     URLs to cogent advice are regularly updated, so your problem may be solved therein.
     Please Do NOT send  Do NOT send other files in this folder Modem/

Several informative files without diagnostics are in the DOCs subfolder.
A file(s) specific to your modem chipset will be written, such as:
  Smartlink.txt, Conexant.txt, Intel.txt , etc

YourModem.txt - Guidance about operating your particular System, for your benefit
     It should NOT be sent to Discuss@linmodems.org

Rational.txt - Motivations of this scanModem package. 

DriverCompiling.txt -  Explains the roles of additional files which may have to be installed
   to support compiling of modem drivers, and the steps to take.   

SoftModem.txt - Information and instructions about "soft modems".
     For these modems, additional steps may be necessary for choice of supporting software.
     The primary PCI ID is that of the host audio or modem controller, which can support diverse Subsystems. It is the chipset of the Subsystem which determines the software needed.

ModemTesting.txt SHOULD be read, but after drivers have been installed.

InfoGeneral.txt has general information about the status of winmodem support under Linux,
    Do read it if ModemData.txt  reports that your current modem is not supported under Linux.

Unsubscribe.txt - Howto terminate email tranmissions from the List.

If you are Linux newcomer, please do locate your local Linux group through:
    http://www.linux.org/groups/index.html  .  If you are not comfortable with English,
    a local Linux user can often be of substantial assistance in getting you on to the Internet.
 
2- ModemData:
 Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.24-16-generic
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686, 
Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008
 scanModem update of:  2008_06_28

 There are no blacklisted modem drivers in /etc/modprobe*  files
USB modems not recognized

For candidate card in slot 02:01.0, firmware information and bootup diagnostics are:
 PCI slot   PCI ID      SubsystemID   Name
 ----------   ---------   ---------   --------------
 02:01.0   125d:2898   148d:1030   Communication controller: ESS Technology ES2898 Modem

 Modem interrupt assignment and sharing:
 --- Bootup diagnostics for card in PCI slot 02:01.0 ----

For candidate card in slot 02:03.0, firmware information and bootup diagnostics are:
 PCI slot   PCI ID      SubsystemID   Name
 ----------   ---------   ---------   --------------
 02:03.0   14f1:1056   14f1:1056   Communication controller: Conexant HCF 56k Data/Fax/Voice/Spkp Modem

 Modem interrupt assignment and sharing:
 --- Bootup diagnostics for card in PCI slot 02:03.0 ----

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 02:01.0:
   Modem chipset  detected on
NAME="Communication controller: ESS Technology ES2898 Modem "
CLASS=0780
PCIDEV=125d:2898
SUBSYS=148d:1030
IRQ=11
IDENT=ESS.com

 For candidate modem in:  02:01.0
   0780 Communication controller: ESS Technology ES2898 Modem
      Primary device ID:  125d:2898
 Support type needed or chipset:   ESS.com
 

----------------end Softmodem section --------------

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt

 From  http://www.linuxant.com/drivers//downloads-ubuntu-x86.php
 download -7.68.00.07full_k2.6.24_16_generic_ubuntu_i386.deb.zip
 Under Linux unpack with:
 $ unzip *.zip
 Then install with:
 $ sudo dpkg -i *.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details.
 
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt

 ESS chipset 125d:2898 modems are supported. Read DOCs/ESScom.txt


Predictive diagnostics for card in bus 02:03.0:
   Modem chipset  detected on
NAME="Communication controller: Conexant HCF 56k Data/Fax/Voice/Spkp Modem "
CLASS=0780
PCIDEV=14f1:1056
SUBSYS=14f1:1056
IRQ=11
IDENT=hcflinmodem

 For candidate modem in:  02:03.0
   0780 Communication controller: Conexant HCF 56k Data/Fax/Voice/Spkp Modem
      Primary device ID:  14f1:1056
 Support type needed or chipset:   hcflinmodem
 

----------------end Softmodem section --------------

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt

 From  http://www.linuxant.com/drivers//downloads-ubuntu-x86.php
 download -7.68.00.07full_k2.6.24_16_generic_ubuntu_i386.deb.zip
 Under Linux unpack with:
 $ unzip *.zip
 Then install with:
 $ sudo dpkg -i *.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details.
 
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.2.3
             and the compiler used in kernel assembly: 4.2.3


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.2
   linuc_headers base folder /lib/modules/2.6.24-16-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu,
 linux-libc-dev). The also required headers of package libc6 are commonly installed by default.
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
   -rwsr-xr-- 1 root dip 269256 2007-10-04 23:27 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
   $ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
   sudo chmod a+x /usr/sbin/pppd

Checking settings of:   /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html


 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0: 
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines ----
من چیز زیادی از این دو فایل نفهمیدم ممنون می شم اگه در باره چگونگی نصب درایور مودم راهنمایی بفرمایید
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: iqson716 در 10 تیر 1387، 05:32 ب‌ظ
سلام دوست من ;)
چیپ مودم شما ESS می باشد و از راهنمایی ویکی کمک بگیرید برای نصب آن :
http://wiki.ubuntu-ir.org/DialupModemHowto/Ess (http://wiki.ubuntu-ir.org/DialupModemHowto/Ess)
اگه مشکلی داشتید بگین
موفق باشید
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: narcissus در 11 تیر 1387، 07:54 ب‌ظ
سلام دوست من ;)
چیپ مودم شما ESS می باشد و از راهنمایی ویکی کمک بگیرید برای نصب آن :
http://wiki.ubuntu-ir.org/DialupModemHowto/Ess (http://wiki.ubuntu-ir.org/DialupModemHowto/Ess)
اگه مشکلی داشتید بگین
موفق باشید


مشه به من در مورد ESS توضیح بدید ؟
من هم با نصب درایور مشکل دارم و هنوز بعد گذشت 3 روز به نتیجه ای نرسیدم
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: ahmad در 11 تیر 1387، 08:15 ب‌ظ
همون لينكي در مطلب قبلي به آن اشاره شده را دنبال كنيد به نتيجه مي رسيد من هم بعد از سه روز بالاخره موفق شدم مودم را نصب گرچه الان مشكل قطع ارتباط و باز نشدن صفحات را دارم . البته در ابونتو 7.04 نصب شد ولي در ابونتو 8.04 هر چه تلاش كردم نصب نشد.
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: narcissus در 11 تیر 1387، 08:22 ب‌ظ
همون لينكي در مطلب قبلي به آن اشاره شده را دنبال كنيد به نتيجه مي رسيد من هم بعد از سه روز بالاخره موفق شدم مودم را نصب گرچه الان مشكل قطع ارتباط و باز نشدن صفحات را دارم . البته در ابونتو 7.04 نصب شد ولي در ابونتو 8.04 هر چه تلاش كردم نصب نشد.
http://forum.ubuntu.ir/index.php?topic=5323.15
مودمن USB بود؟
من اینا رو دنبال کردم ولی هنوز به نتیجهای نرسیدم
البته مطمعن نیستم که درست عمل کرده باشم
چون 1 بلد نیستم کاملا
2 تو شهر ما کسی رو نمیشناسم که بلد باشه و بتونم ازش راهنمایی بگیرم

پس فقط رو نت میتونم حساب کنم
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: iqson716 در 11 تیر 1387، 08:31 ب‌ظ
چه بدتر  :D
من به جای شما بودم یه مودم دیگه با هزینه ی ناچیز تهیه میکردم
مودم اکسترنال با پورت سریال یا یه مودم با چیپ hsf بهترین گزینه همون مودم با پورت سریال هستش ;)
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: narcissus در 11 تیر 1387، 08:33 ب‌ظ
چه بدتر  :D
من به جای شما بودم یه مودم دیگه با هزینه ی ناچیز تهیه میکردم
مودم اکسترنال با پورت سریال یا یه مودم با چیپ hsf بهترین گزینه همون مودم با پورت سریال هستش ;)

یعنی هیچ راهی نیست تا من این مودم رو نصب کنم؟
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: amirHP در 27 تیر 1387، 01:55 ب‌ظ
آقا اين فايل مودم ديتا رو چجوري مي خونن ؟
حسابي گير كردم ؟
آيا نوع مودم از اين خط معلوم ميشه ؟

 PCI slot   PCI ID      SubsystemID   Name
 ----------   ---------   ---------   --------------
 00:1b.0   8086:284b   1025:011c   Audio device: Intel Corporation 82801H
   Modem chipset  detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=1025:011c
IRQ=19
HDA=8086:284b
SOFT=8086:284b.HDA
ArchivedChip=0x11c11040
IDENT=11c11040

در اين صورت من چه درايوي را بايد نصب كنم . با درايو اينتل در ويكي سايت هم راه نيفتاد .
بابا سيستم عاملي كه قدرت اتصال به اينترنت را نداشته باشه سيستم عامل نيست .
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: مهدي در 31 تیر 1387، 06:49 ق‌ظ
همه ي دوستاني كه در انجمن حضور داريد سلام
من مهدي هستم وتازه شروع به استفاده از لينوكس كرده ام ومشكلاتي در نصب مودم وكارت شبكه برايم پيش آمده است  از دوستان مي خواهم مرا راهنمايكنيد
مودمم silicon است همچنين درايور مربوط به لينوكس را دارد
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: Behnam Golds در 31 تیر 1387، 07:06 ق‌ظ
همه ي دوستاني كه در انجمن حضور داريد سلام
من مهدي هستم وتازه شروع به استفاده از لينوكس كرده ام ومشكلاتي در نصب مودم وكارت شبكه برايم پيش آمده است  از دوستان مي خواهم مرا راهنمايكنيد
مودمم silicon است همچنين درايور مربوط به لينوكس را دارد


سلام   مهدی  جان   خوش  اومدی ...

اگر  ممکنه    مدل   دقیق  مودم   رو  بده    .   ترجیحا   خروجی   scanmodem   رو  هم   بذار  اینجا   تا   سریعتر به    مشکلت   رسیدگی  بشه.  برنامه ی  scanmodem   رو  میتونی  از  لینکی  که  iqson716       معرفی   کرده  بگیری   :   
http://wiki.ubuntu-ir.org/DialupModemHowto/ScanModem
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: lovee20002002 در 31 تیر 1387، 09:15 ق‌ظ
سلام من هم مشکل در نصب مودم دارم دارم سوال رو تو انجمن تازه کارها پرسیدم فکر کنم میبایست اینجا بپرسم اینم لینک سوالم ممنون میشم منو راهنمایی کنید
http://forum.ubuntu.ir/index.php?topic=5633.0
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: مهدي در 02 امرداد 1387، 05:27 ق‌ظ
دوستان سلام
يك نكته عجيب در نصب لينوكس برايم اتفاق افتاده ،من در اين يك ماه حدود ده بار لينوكس را نصب كرده ام كه دو يا سه بار لينوكس تمام قطعات سيستم را شناخته ولي در باقي موارد نتوانسته بشناسد
همچنين مرا راهنمايي كنيد كه چگونه مي توان ابونتو را رايگان دريافت كرد(سرعت دانلودم خيلي كم است)
درضمن خروجي scanmodemاين گونه بود

Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry Fedora Core release 6 (Zod)
Kernel  kernel 2.6.18-1.2798.fc6
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686,  Fedora Core release 6 (Zod)
Kernel
Linux version 2.6.18-1.2798.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Mon Oct 16 14:37:32 EDT 2006
 scanModem update of:  2008_07_12

 There are no blacklisted modem drivers in /etc/modprobe*  files
Attached USB devices are:
 ID 10d6:1100 Actions Semiconductor Co., Ltd MPMan MP-Ki 128 MP3 Player/Recorder

USB modems not recognized

For candidate card in slot 01:06.0, firmware information and bootup diagnostics are:
 PCI slot   PCI ID      SubsystemID   Name
 ----------   ---------   ---------   --------------
 01:06.0   14f1:2f50   14f1:205f   Communication controller: Conexant Unknown device 2f50

 Modem interrupt assignment and sharing:
 --- Bootup diagnostics for card in PCI slot 01:06.0 ----

For candidate card in slot 00:05.0, firmware information and bootup diagnostics are:
 PCI slot   PCI ID      SubsystemID   Name
 ----------   ---------   ---------   --------------
 00:05.0   10de:03f0   1458:a002   Audio device: nVidia Corporation MCP61 High Definition Audio

 Modem interrupt assignment and sharing:
 --- Bootup diagnostics for card in PCI slot 00:05.0 ----


===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

 PCI slot 00:05.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.18-1.2798.fc6/kernel/sound/pci/hda/snd-hda-intel.ko
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 01:06.0:
   Modem chipset  detected on
NAME="Communication controller: Conexant Unknown device 2f50 "
CLASS=0780
PCIDEV=14f1:2f50
SUBSYS=14f1:205f
IRQ=10
IDENT=hsfmodem

 For candidate modem in:  01:06.0
   0780 Communication controller: Conexant Unknown device 2f50
      Primary device ID:  14f1:2f50
 Support type needed or chipset:   hsfmodem
 


For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt

 Support for the 14f1:2f50  and 14f1:2215 HSF modems is projected early in 2007 from Linuxant.
 Start at  http://www.linuxant.com/drivers/hsf/full for
 eventually download of a hsfmodem-7.68.00.07full_k.???.zip package
 with ??? the package type (deb, rpm, tar etc)
 These packages have compiled drivers but will also compile a driver,
 if there is a mismatch between the resident kernel and provided driver.
 The generic hsfmodem-7.68.00.07full.tar.gz package only provides compiling support

 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt



Predictive diagnostics for card in bus 00:05.0:
   Modem chipset not detected on
NAME="Audio device: nVidia Corporation MCP61 High Definition Audio "
CLASS=0403
PCIDEV=10de:03f0
SUBSYS=1458:a002
IRQ=11
HDA=10de:03f0
SOFT=10de:03f0.HDA


 High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,
 and many are supported by the ALSA audio+modem driver snd-hda-intel
 A modem was not detected on HDA card 10de:03f0.
 If another modem card is present, then most likely 10de:03f0 does not host a modem.
 If another modem card has not been detected, then possibilities are:
   1) A Conexant modem chip is present on 10de:03f0, as Conexant chips
 are frequently not detectable by ALSA diagnostics
   2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
    wvdialconf  /etc/wvdial.conf

 For candidate modem in:  00:05.0
   0403 Audio device: nVidia Corporation MCP61 High Definition Audio
      Primary device ID:  10de:03f0
    Subsystem PCI_id  1458:a002
    Softmodem codec or chipset from diagnostics:
                               from    Archives:
                       
     

Support type needed or chipset:   

Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.

2) An ALSA modem driver plus slmodemd.  Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.1.tar.gz from: 
   http://linmodems.technion.ac.il/packages/smartlink/

----------------end Softmodem section --------------
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.1
             and the compiler used in kernel assembly: 4.1.1


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.1
   linuc_headers base folder /lib/modules/2.6.18-1.2798.fc6/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are n. The also required headers of package libc6 are commonly installed by default.
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
   -r-xr-xr-x 1 root root 312956 ژوئیه 24  2006 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
   $ su - root  (not for Ubuntu)
         chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
    chmod a+x /usr/sbin/pppd

Checking settings of:   /etc/ppp/options
lock

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html


 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0: 
     Within /etc/udev/ files:
/etc/udev/rules.d/50-udev.rules:KERNEL=="modems/mwave*",        NAME="%k", GROUP="uucp", MODE="0660"
     Within /etc/modprobe.conf files:

     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: مهدي در 07 امرداد 1387، 06:14 ق‌ظ
نقل‌قول
دوستان سلام
يك نكته عجيب در نصب لينوكس برايم اتفاق افتاده ،من در اين يك ماه حدود ده بار لينوكس را نصب كرده ام كه دو يا سه بار لينوكس تمام قطعات سيستم را شناخته ولي در باقي موارد نتوانسته بشناسد
همچنين مرا راهنمايي كنيد كه چگونه مي توان ابونتو را رايگان دريافت كرد(سرعت دانلودم خيلي كم است)
درضمن خروجي scanmodemاين گونه بود

Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry Fedora Core release 6 (Zod)
Kernel  kernel 2.6.18-1.2798.fc6
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686,  Fedora Core release 6 (Zod)
Kernel
Linux version 2.6.18-1.2798.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Mon Oct 16 14:37:32 EDT 2006
 scanModem update of:  2008_07_12

 There are no blacklisted modem drivers in /etc/modprobe*  files
Attached USB devices are:
 ID 10d6:1100 Actions Semiconductor Co., Ltd MPMan MP-Ki 128 MP3 Player/Recorder

USB modems not recognized

For candidate card in slot 01:06.0, firmware information and bootup diagnostics are:
 PCI slot   PCI ID      SubsystemID   Name
 ----------   ---------   ---------   --------------
 01:06.0   14f1:2f50   14f1:205f   Communication controller: Conexant Unknown device 2f50

 Modem interrupt assignment and sharing:
 --- Bootup diagnostics for card in PCI slot 01:06.0 ----

For candidate card in slot 00:05.0, firmware information and bootup diagnostics are:
 PCI slot   PCI ID      SubsystemID   Name
 ----------   ---------   ---------   --------------
 00:05.0   10de:03f0   1458:a002   Audio device: nVidia Corporation MCP61 High Definition Audio

 Modem interrupt assignment and sharing:
 --- Bootup diagnostics for card in PCI slot 00:05.0 ----


===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

 PCI slot 00:05.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.18-1.2798.fc6/kernel/sound/pci/hda/snd-hda-intel.ko
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 01:06.0:
   Modem chipset  detected on
NAME="Communication controller: Conexant Unknown device 2f50 "
CLASS=0780
PCIDEV=14f1:2f50
SUBSYS=14f1:205f
IRQ=10
IDENT=hsfmodem

 For candidate modem in:  01:06.0
   0780 Communication controller: Conexant Unknown device 2f50
      Primary device ID:  14f1:2f50
 Support type needed or chipset:   hsfmodem
 


For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt

 Support for the 14f1:2f50  and 14f1:2215 HSF modems is projected early in 2007 from Linuxant.
 Start at  http://www.linuxant.com/drivers/hsf/full for
 eventually download of a hsfmodem-7.68.00.07full_k.???.zip package
 with ??? the package type (deb, rpm, tar etc)
 These packages have compiled drivers but will also compile a driver,
 if there is a mismatch between the resident kernel and provided driver.
 The generic hsfmodem-7.68.00.07full.tar.gz package only provides compiling support

 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt



Predictive diagnostics for card in bus 00:05.0:
   Modem chipset not detected on
NAME="Audio device: nVidia Corporation MCP61 High Definition Audio "
CLASS=0403
PCIDEV=10de:03f0
SUBSYS=1458:a002
IRQ=11
HDA=10de:03f0
SOFT=10de:03f0.HDA


 High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,
 and many are supported by the ALSA audio+modem driver snd-hda-intel
 A modem was not detected on HDA card 10de:03f0.
 If another modem card is present, then most likely 10de:03f0 does not host a modem.
 If another modem card has not been detected, then possibilities are:
   1) A Conexant modem chip is present on 10de:03f0, as Conexant chips
 are frequently not detectable by ALSA diagnostics
   2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
    wvdialconf  /etc/wvdial.conf

 For candidate modem in:  00:05.0
   0403 Audio device: nVidia Corporation MCP61 High Definition Audio
      Primary device ID:  10de:03f0
    Subsystem PCI_id  1458:a002
    Softmodem codec or chipset from diagnostics:
                               from    Archives:
                       
     

Support type needed or chipset:   

Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.

2) An ALSA modem driver plus slmodemd.  Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.1.tar.gz from: 
   http://linmodems.technion.ac.il/packages/smartlink/

----------------end Softmodem section --------------
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.1
             and the compiler used in kernel assembly: 4.1.1


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.1
   linuc_headers base folder /lib/modules/2.6.18-1.2798.fc6/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are n. The also required headers of package libc6 are commonly installed by default.
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
   -r-xr-xr-x 1 root root 312956 ژوئیه 24  2006 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
   $ su - root  (not for Ubuntu)
         chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
    chmod a+x /usr/sbin/pppd

Checking settings of:   /etc/ppp/options
lock

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html


 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0: 
     Within /etc/udev/ files:
/etc/udev/rules.d/50-udev.rules:KERNEL=="modems/mwave*",        NAME="%k", GROUP="uucp", MODE="0660"
     Within /etc/modprobe.conf files:

     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


همگي سلام
ازدوستان كسي نيست پاسخ منو بده
در ضمن من هم ابونتو سفارش دادم
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: lovee20002002 در 07 امرداد 1387، 08:33 ق‌ظ
سلام دوست عزیز
مدم شما از نوع Conexant Unknown device 2f50
این آموزش رو بخون اگر مشکلی بود دوستان حتما کمک میکنند
http://wiki.ubuntu-ir.org/DialupModemHowto/Conexant
برای اتصال به اینترنت هم از رابط pppconfig استفاده کنی بهتره (تجربه شخصی)
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: مهدي در 10 امرداد 1387، 06:35 ق‌ظ
با تشكر از راهنمايي تون ولي بازم نتونستم مودم نصب كنم
درضمن در داخل سي دي درايور مودمم دو تادرايور  است hsfmodem-7.60.00.00oem-1.i386.rpm و
hsfmodem-7.60.00.00oem.tar.gz هر دو تا رو در توزيع هاي مختلف امتحان كردم ولي مودم نصب  نشد ](*,)
هم اكنون ازopen suse.10.3    استفاده مي كنم وطبق راهنما اين درايور را گرفتم
 hsfmodem-7.68.00.12full_k2.6.22.5_31_default-1suse.i586.rpm.zip

 آيا در ابونتو 8.4 مي تونم با درايور هاي داخل سي دي مودم       مودمم رو نصب كنم
در ضمن من با همين سي دي درايور مودم رو در ويندوز نصب كردم
اگر مي شه با توجه به اطلاعاتي كه دادم مرا راهنمايي كنيد
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: amirHP در 10 امرداد 1387، 08:08 ق‌ظ
lمودم من نصب شده اما وقتی wvdial رو می زنم . این خطا رو پشت سر هم میده.( جوری که مجبور می شم ترمینال رو ببندم )


کد:

--> No Carrier!  Trying again.
--> Sending: ATDT9718145
--> Waiting for carrier.
ATDT9718145
NO CARRIER
ERROR
--> No Carrier!  Trying again
.
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: lovee20002002 در 10 امرداد 1387، 08:43 ق‌ظ
سلام مهدی جان شرمنده دیر شد
از این لینک درایور مودمتو دانلود کن
http://www.linuxant.com/drivers/hsf/full/archive/hsfmodem-7.68.00.07full/hsfmodem-7.68.00.07full.tar.gz
بعد نصب کن
من دانلود نکردم ولی فکر کنم داخاش فایل باید Setup باشه
یک ترمینال باز کن وارد پوشه شو و این دتور رو بزن
$ sudo ./setup
بعد از نصب دست گاه رو ریستارت کن و با wvdial کانکت شو ببین بوق مودم داری اگر وصل شود که فبها ولی اگر نشد اررورو بگذار ببینیم چی میشه
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: lovee20002002 در 10 امرداد 1387، 08:46 ق‌ظ
@amir72
دوست عزیز ممکن هست این دستور رو اجرا و مت داخل صغحهای که باز میکنه رو اینجا بگذاری؟
sudo gedit /etc/wvdial.conf
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: مهدي در 12 امرداد 1387، 06:22 ق‌ظ
خيلي ممنون كه وقت گذاشتيد وپاسخ داديد  ;)
من درايور رو گرفتم ولي نتونستم نصب كنم واين پيام رو مي داد
mm@linux-s9zz:~> cd ~/Desktop
mm@linux-s9zz:~/Desktop> sudo ./setup $
root's password:
sudo: ./setup: command not found
mm@linux-s9zz:~/Desktop> 
در ضمن گفته بوديد كه( یک ترمینال باز کن وارد پوشه شو و این دستور رو بزن
$ sudo ./setup )مي شه توضيح بدين چطور وارد پوشه بشم شايد مشكل از ندونستن همين مطلب باشه  ???
همچنين آيا تمام اين دستورات براي ابونتو هست يا تمام توزيع هاي لينوكس
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: Behnam Golds در 12 امرداد 1387، 07:17 ق‌ظ
یه   فایل متنی به  اسم  INSTALL  هست  ،  اونو  بخون  نوشته  چیکار باید بکنی ...

sudo make installsudo hsfconfig
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: lovee20002002 در 12 امرداد 1387، 11:12 ق‌ظ
یه   فایل متنی به  اسم  INSTALL  هست  ،  اونو  بخون  نوشته  چیکار باید بکنی ...

sudo make installsudo hsfconfig
همين كارو انجام بديد شرمنده من سختم بود دانلود كنم و نگاه كنم ببينم چطوري نصب ميشه
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: amirHP در 13 امرداد 1387، 06:21 ق‌ظ
در این تایپیک به داد بنده برسید .
http://forum.ubuntu.ir/index.php?topic=5618.15
 (http://forum.ubuntu.ir/index.php?topic=5618.15)
lovee20002002
اینم فایلی که خواسته بودید .
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+MS=34
Password = 7264
Phone = 9718100
Modem Type = Analog Modem
stupid mode = yes
Baud = 460800
New PPPD = yes
Modem = /dev/ttySL0
ISDN = 0
Username = p10643673773864
carrier check = no

 :'( :'(
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: lovee20002002 در 13 امرداد 1387، 11:54 ق‌ظ
دوست عزیز به جای این خط این رو جایگزین کن
Modem = /dev/ttySL0

Modem = /dev/modem
save کن بعد با این کانکت کن
sudo wvdial
مال من به این صورت حل شد بعد از تست اطلاع بدید

عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: lovee20002002 در 15 امرداد 1387، 06:49 ب‌ظ
اینم wvdial.conf من
[Dialer Defaults]
Phone = 9713220
Username = y94863652
Password = r95724519
New PPPD = yes
Init3 = AT+MS=34
Carrier Check = no
modem = /dev/ttySL0
امبدوارم به دردت بخوره اگر مشکلت حل نشد بگو از اول شروع کنیم ایشالا حلش میکنیم
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: amirHP در 16 امرداد 1387، 06:26 ق‌ظ
نقل‌قول
دوست عزیز به جای این خط این رو جایگزین کن
Modem = /dev/ttySL0

Modem = /dev/modem

این کارو کردم اما هیچ اتفاق خاصی نیفتاد . فکر می کنم بهتر باشه از اول شروع کنیم . برای این کار اگه به تایپیک http://forum.ubuntu.ir/index.php?topic=5618.15 (http://forum.ubuntu.ir/index.php?topic=5618.15) مراجعه کنید و مراحلی را که پشت سر گذاشتم را ببینید . ممنون میشم . ;) ;) ;) ;)
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: مهدي در 17 امرداد 1387، 03:50 ب‌ظ
دوستان عزيز بازم سلام
من هر كاري تونستم كردم ولي نتونستم اين مودم رو نصب كنم حالا هم سوالاتي برام پيش امده  ممنون مي شم جواب بدين
اول اينكه فايل هاي نصب برنامه در لينوكس چه پسوندي دارند ( يعني فايل setup لينوكس چطور نام وشكلي داره)
دوم اينكه چطور بايد برنامه ها رو نصب كرد به طور مثال اين برنامه ها   (  ...- mplayer-xmme-gxine-stellarium)
من براي نصب برنامه  gxine  طبق راهنماي هاي فايل متني  REDMYو INSTALL اين كار را كردم
اول فايل gxine-0.5.11.tar.bz2  رو از حالت فشرده خارج كردم بعد در فايل ايجاد شده يك پنجره ي ترمينال باز كردم وبعد اين دستورات رو دادم اين جواب ها داده شد
mm@linux-s9zz:~/Desktop/gxine-0.5.11> configure
bash: configure: command not found
mm@linux-s9zz:~/Desktop/gxine-0.5.11> ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... no
checking whether to enable maintainer-specific portions of Makefiles... no
checking for style of include used by make... none
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
mm@linux-s9zz:~/Desktop/gxine-0.5.11> make
bash: make: command not found
mm@linux-s9zz:~/Desktop/gxine-0.5.11> make install
bash: make: command not found
مي دانم اين دستورات اشتباه است ولي نمي دانم كجايش اشتباه دارد
لطفا مرا راهنمايي كنيد
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: مهدي در 18 امرداد 1387، 10:01 ق‌ظ
دوستان سلام
فكر كنم مشكل را پيدا كردم  ::)
مشكل سيستم من اين هست كه دستور make  را اجرا نمي كنه و براي همين هست كه درايور مودمم نصب نمي شده 
از دوستان تقاضا  مي كنم  راه حلي در اختيار من بگذاريد
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: iqson716 در 18 امرداد 1387، 03:30 ب‌ظ
شما کامپایلر سی نداری
اگر سی‌دی هما رو تهیه کنید قبل از اتصال به اینترنت و بعد از اون خیلی مفیده
برای دریافتش تو همین انجمن یه سرچ بکنی نتیجه میگیری  ;)
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: مهدي در 04 مهر 1387، 06:01 ق‌ظ
با سلام

بالاخره بعداز چند هفته ابونتو 8.04 رو نصب كردم و واقعاًبهترين سيستم عامل هستش (بجز در مورد مودم )

در ضمن مودمم نصب شد مشكل من كامپايلر سي نبود علت اين بوداول دستور make كلمه sudo  رو تايپ نمي كردم 

حال كه نصب شده بايد چطور وصل اينترنت بشم
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: lovee20002002 در 04 مهر 1387، 12:55 ب‌ظ
سلام خوشحالم بلاخره موفق شدید
با خوندن ویکی و کمی سرچ مشکلتون حل میشه
http://wiki.ubuntu-ir.org/DialupModemHowto/SetUpDialer?action=show&redirect=wvdial
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: مهدي در 07 مهر 1387، 06:17 ق‌ظ
سلام

خيلي ممنون از راهنمايتون

طبق راهنماي هاي ويكي عمل كردم ولي pppconfig كه هيچ اثري نداشت وابزار network هم چند بار شماره گرفت بعد هم از كار افتاد درضمن مودم رو در پنل نشون نمي دادمانند تصوير زير
(http://)
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: lovee20002002 در 09 مهر 1387، 12:55 ب‌ظ
سلام از wvdial استفاده کنید
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: hossein66308 در 09 مهر 1387، 03:51 ب‌ظ
سلام آقایون
من که همش مشکلم با این اوبنتو. مودمم conexant haudio data fax modem smartcp v92..... هستش که نمیشناسه . گرافیکم nvidia 7150m که نمی شناسه . هر جا رم دیدم قاطی کردم.
آقا خلاصه یه روش نصب درایور هارو بگین .بگین چی پاک کنیم. چی بریزیم. wvdial که همه میگن کجاس ؟ javascript:void(0);
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: lovee20002002 در 10 مهر 1387، 01:32 ق‌ظ
سلام دوست عزیز شما ویکی رو مطالعه کردید؟
اگرنه حتما یک سر بزنید
اگر از ویکی نتیجه نگرفتید مشکلتون رو به صورتی بیان کنید که ما بتونیم کمک کنیم مثلا اگر با اسکن مودم مشکل دارید درایور مودم رو پیدا نمیکنید و....
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: مهدي در 14 مهر 1387، 06:04 ق‌ظ
سلام
ببخشيد اشتباه ارسال شد
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: مهدي در 14 مهر 1387، 06:15 ق‌ظ
با سلام
ببخشيد اين پيوست  رو مي خواستم براي سايت parssky بفرستم مجبور شدم از اينجا ارسال كنم به هرحال ببخشيد
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: مهدي در 19 مهر 1387، 06:28 ق‌ظ
دوستان سلام 
من نرم افزار gnome-ppp رو نصب كردم ولي كار مي كنم وصل اينترنت نمي شه توي قسمت log  هم اين متن نوشته مي شه
--> Ignoring malformed input line: ";Do NOT edit this file by hand!"
--> WvDial: Internet dialer version 1.60
--> Cannot set information for serial port.
--> Initializing modem.
--> Sending: ATX3
ATX3
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATM0L0DT9713203
--> Waiting for carrier.
ATM0L0DT9713203
--> Timed out while dialing.  Trying again.
--> Maximum Attempts Exceeded..Aborting!!
--> Disconnecting at Thu Oct  9 05:33:17 2008
 
در ضمن چه مودمي توي ابونتو راحت شناسايي وآماده كار مي شه مثل دستگاه بولوتوثم كه به محض وصل شدن به پورت يواس بي شناسايي وآماده كار شد

همچنين مودم من چه نوع مودمي هست (اكسترنال يا اينترنال --pci  يا com ---چيپ ست hsf  يا hcf ويا conexant )لطفا در مورد هر كدوم از اصطلاحات بالا توضيح دهيد

اين چند تا عكس هم از نرم افزار gnome -ppp
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: مهدي در 19 مهر 1387، 05:07 ب‌ظ
با سلام
بالاخره مودم نصب شد \\:D/
محض اطلاع ديگران اين كار را كردم
ابتدا با نرم افزار scanModem  نوع مودم رو تشخيص وبا استفاده ازاين خط زير در فايل modemdeta كه در پوشه modem قرار داشت درايور مودمم رو گرفتم

 Support for the 14f1:2f50  and 14f1:2215 HSF modems is projected early in 2007 from Linuxant.
 From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
 download hsfmodem-7.68.00.07full_k2.6.24_16_generic_ubuntu_i386.deb.zip

سپس از آدرس
http://www.linuxant.com/alsa-driver/alsa-driver-linuxant_1.0.17.5-1_all.deb  نرم افزار alsa رو گرفتم
سپس alsa رو نصب وبعد ريست كردم وبعد درايور  رو نصب دوباره ريست كردم
بعد با نرم افزارgnome -ppp كانكت شدم وتمام مراحل كانكت شدن رو انجام داد ولي هيچ آدرس اينترنتي رو نتونستم باز كنم حتي با نرم افزار اپرا وگوگل ارث هم امتحان كردم (در يك كلام مودم وصل سرور ISP هست ولي deta ندارم) ](*,) ](*,) ???
در ضمن دوتا پستي كه در 14 مهر زده بودم رو حذف كنيد
حالا اگه مي شه كمك كنيد
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: hadi termei در 10 آبان 1387، 10:08 ق‌ظ
همه دوستان سلام
ابتدا تشکر می کنم از دوست خوبم آقا هادی که زحمت فرستادن این پست رو قبول کردند
کسی نیست مشکل من رو حل کنه توی پست های قبلی گفتم که مودمم نصب شده ولی
هربار می خوام کانکنت بشم مودم شماره می گیره ونیک پنجره باز می شه که
میگه کانکت شدم ولی در این پنچره نه سرعت  هست ونه اپی و...  در ضمن بعد
از سی ثانیه دیسکانکت می شه
در ضمن مدیران سایت به داد من برسید نام کاربری من مهدی وآدرس ایمیل من
mahzrb@gmail.com  است
حدود دو ماه است که رمز عبورم  برای وارد شدن به انجمن از کار افتاده  و
قسمت درخواست رمز مجدد را هم امتحان کردم  که می گه رمز مجدد به ایمیلم
ارسال شده در صورتی که در این دو ماه هیچ ایمیلی  از انجمن برایم فرستاده
نشده از مدیران سایت تقاضا می کنم که رمز عبور ونام کاربری جدید برایم به
آدرس  mahzrb@gmail.com بفرستید ویا اینکه تمام اطلاعات مر بوط به مرا از
بین ببرید تا بتوانم دوباره در انجمن ثبت نام کنم
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: Roozbeh Shafiee در 10 آبان 1387، 10:38 ق‌ظ
همه دوستان سلام
ابتدا تشکر می کنم از دوست خوبم آقا هادی که زحمت فرستادن این پست رو قبول کردند
کسی نیست مشکل من رو حل کنه توی پست های قبلی گفتم که مودمم نصب شده ولی
هربار می خوام کانکنت بشم مودم شماره می گیره ونیک پنجره باز می شه که
میگه کانکت شدم ولی در این پنچره نه سرعت  هست ونه اپی و...  در ضمن بعد
از سی ثانیه دیسکانکت می شه
در ضمن مدیران سایت به داد من برسید نام کاربری من مهدی وآدرس ایمیل من
mahzrb@gmail.com  است
حدود دو ماه است که رمز عبورم  برای وارد شدن به انجمن از کار افتاده  و
قسمت درخواست رمز مجدد را هم امتحان کردم  که می گه رمز مجدد به ایمیلم
ارسال شده در صورتی که در این دو ماه هیچ ایمیلی  از انجمن برایم فرستاده
نشده از مدیران سایت تقاضا می کنم که رمز عبور ونام کاربری جدید برایم به
آدرس  mahzrb@gmail.com بفرستید ویا اینکه تمام اطلاعات مر بوط به مرا از
بین ببرید تا بتوانم دوباره در انجمن ثبت نام کنم

احتمالا شما از برنامه Gnome-ppp برای اتصال به اینترنت استفاده می کنید ! پیشنهاد می کنم از برنامه kppp برای این کار استفاده کنید

البته برنامه wvdial هم هست که تحت محیط تکست اجرا می شه !
عنوان: پاسخ به: چگونگی نصب درایور مودم
ارسال شده توسط: مهدي در 26 مهر 1388، 06:29 ق‌ظ
سلام
تشکر از کمکتون ;)
kppp بهترین برنامه رای اتصال به اینتر نت با مودم دایل آ پ و... هست  \\:D/
همچنین تمام نسخه های Gnome-ppp مشکل قطع ارتباط بعد از سی ثانیه رو دارند