انجمن‌های فارسی اوبونتو
کمک و پشتیبانی => انجمن عمومی => نویسنده: بهزادubuntu در 21 دی 1387، 04:06 ق‌ظ
-
سلام
داشتم یه نرم افزار با چند وابستگی نصب میکردم که به یک بسته گیر داد و نصب نکرد و حالا دیگه دانلد میکنه ولی نصب نمیکنه!
مثلا:
root@behzad-desktop:~# aptitude install xmms2
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
The following NEW packages will be installed:
libxmmsclient-glib1{a} libxmmsclient4{a} xmms2 xmms2-client-cli{a}
xmms2-core{a} xmms2-plugin-alsa{a} xmms2-plugin-id3v2{a}
xmms2-plugin-mad{a} xmms2-plugin-vorbis{a}
The following partially installed packages will be configured:
lynx-cur lynx-cur-wrapper
0 packages upgraded, 9 newly installed, 0 to remove and 14 not upgraded.
Need to get 1030kB of archives. After unpacking 2040kB will be used.
Do you want to continue? [Y/n/?] y
Writing extended state information... Done
Get:1 http://ir.archive.ubuntu.com intrepid/universe libxmmsclient4 0.5DrLecter-2ubuntu1 [46.3kB]
Get:2 http://ir.archive.ubuntu.com intrepid/universe libxmmsclient-glib1 0.5DrLecter-2ubuntu1 [11.8kB]
Get:3 http://ir.archive.ubuntu.com intrepid/universe xmms2-core 0.5DrLecter-2ubuntu1 [851kB]
Get:4 http://ir.archive.ubuntu.com intrepid/universe xmms2-client-cli 0.5DrLecter-2ubuntu1 [40.2kB]
Get:5 http://ir.archive.ubuntu.com intrepid/universe xmms2-plugin-vorbis 0.5DrLecter-2ubuntu1 [14.5kB]
Get:6 http://ir.archive.ubuntu.com intrepid/universe xmms2-plugin-mad 0.5DrLecter-2ubuntu1 [18.4kB]
Get:7 http://ir.archive.ubuntu.com intrepid/universe xmms2-plugin-id3v2 0.5DrLecter-2ubuntu1 [17.2kB]
Get:8 http://ir.archive.ubuntu.com intrepid/universe xmms2-plugin-alsa 0.5DrLecter-2ubuntu1 [16.4kB]
Get:9 http://ir.archive.ubuntu.com intrepid/universe xmms2 0.5DrLecter-2ubuntu1 [14.0kB]
Fetched 1030kB in 3min15s (5276B/s)
E: Sub-process /usr/bin/dpkg returned an error code (100)
A package failed to install. Trying to recover:
sh: dpkg: not found
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
Writing extended state information... Done
root@behzad-desktop:~#فکر کنم مشکل اینجاست
E: Sub-process /usr/bin/dpkg returned an error code (100)
A package failed to install. Trying to recover:
sh: dpkg: not found
وهر کاری کرlدم درست نشد ](*,)
یکی از دستور هایی که زدم فکر کنم اینه (یا شبیه این) :oops:
sudo rm /usr/bin/dpkg
-
این دو تا دستور رو امتحان کن ببین درست میشه یا نه :
sudo dpkg --configure -a
sudo apt-get install -f
-
مشکل باید از فایل سورس شما باشه . به این مشکل زیاد برخوردم خروحی دستور apt-get update چیزی رو نشون می ده ؟
-
این دو تا دستور رو امتحان کن ببین درست میشه یا نه :
sudo dpkg --configure -a
sudo apt-get install -f
root@behzad-desktop:~# sudo dpkg --configure -a
sudo: dpkg: command not found
root@behzad-desktop:~# sudo apt-get install -f
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 14 not upgraded.
2 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
E: Sub-process /usr/bin/dpkg returned an error code (100)
root@behzad-desktop:~#این کارو قبلا کرده بودم ](*,) ظاهرا مشکل عمیق تره ](*,)
E: Sub-process /usr/bin/dpkg returned an error code (100)مشکل باید از فایل سورس شما باشه . به این مشکل زیاد برخوردم خروحی دستور apt-get update چیزی رو نشون می ده ؟
مهدی جان این کارو هم کردم ولی فایده نداره اول وقتی مشکل درست شد ترمینال میگفت sudo dpkg --configure -a رو بزن ولی کاری نمیکرد منم چند تا دستور دیگه مثل همین اپدیت و... رو زدم ولی درست نشد ](*,)
-
شما که با این دستور زدی پدرشو درآوردی عزیز من !
یکی از دستور هایی که زدم فکر کنم اینه (یا شبیه این) :oops:
sudo rm /usr/bin/dpkg
ببین منم پاکش کردم همون ارور رو میده :
behnam@ubuntu:~$ sudo mv /usr/bin/dpkg /home/behnam/Desktop/
behnam@ubuntu:~$ sudo apt-get install netspeed
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
smplayer-translations libamrnb3 libamrwb3
Use 'apt-get autoremove' to remove them.
The following NEW packages will be installed:
netspeed
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 181kB of archives.
After this operation, 713kB of additional disk space will be used.
Get:1 http://ftp.freepark.org intrepid/universe netspeed 0.14-3 [181kB]
Fetched 181kB in 14s (12.2kB/s)
E: Sub-process /usr/bin/dpkg returned an error code (100)
برات آپلود کردم بگیر دوباره بریز توی مسیر قبلی :
http://wiki.ubuntu-ir.org/BehnamGolestani?action=AttachFile&do=get&target=dpkg
اینطوری :
sudo mv /Current/Directory/dpkg /usr/bin/
البته میتونی از اینجا هم بگیریش :
http://packages.ubuntu.com/intrepid/dpkg
ولی نمیتونی نصبش کنی چون dpkg نداری ;D باید اکسترکت کنی و بعد dpkg رو دستی کپی کنی .اولی رو بگیر حجمش کمتره.
ویرایش :
قبل از کپی کردن مجوزهارو تغییر بده :
sudo chmod 755 /Current/Directory/dpkg
-
ممنون بهنام جان خراب کاری خودم درست شد ولی مشکلی که اول داشتم و حالا بهش گیر میده اینه:
root@behzad-desktop:~# aptitude install yakuake-kde4
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
The following NEW packages will be installed:
yakuake{a} yakuake-kde4
The following partially installed packages will be configured:
lynx-cur lynx-cur-wrapper
0 packages upgraded, 2 newly installed, 0 to remove and 38 not upgraded.
Need to get 217kB of archives. After unpacking 1372kB will be used.
Do you want to continue? [Y/n/?] y
Writing extended state information... Done
Get:1 http://ir.archive.ubuntu.com intrepid/universe yakuake 2.9.3-0ubuntu1 [212kB]
Get:2 http://ir.archive.ubuntu.com intrepid/universe yakuake-kde4 2.9.3-0ubuntu1 [4836B]
Fetched 217kB in 15s (14.4kB/s)
Selecting previously deselected package yakuake.
(Reading database ... 151454 files and directories currently installed.)
Unpacking yakuake (from .../yakuake_2.9.3-0ubuntu1_i386.deb) ...
Selecting previously deselected package yakuake-kde4.
Unpacking yakuake-kde4 (from .../yakuake-kde4_2.9.3-0ubuntu1_all.deb) ...
Processing triggers for man-db ...
Processing triggers for menu ...
dpkg: error processing lynx-cur (--configure):
package lynx-cur is not ready for configuration
cannot configure (current status `triggers-awaited')
Setting up yakuake (2.9.3-0ubuntu1) ...
Setting up yakuake-kde4 (2.9.3-0ubuntu1) ...
dpkg: ../../src/packages.c:221: process_queue: Assertion `dependtry <= 4' failed.
E: Sub-process /usr/bin/dpkg exited unexpectedly
A package failed to install. Trying to recover:
Processing triggers for menu ...
dpkg: ../../src/packages.c:221: process_queue: Assertion `dependtry <= 4' failed.
Aborted
E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem.
E: Could not regain the system lock! (Perhaps another apt or dpkg is running?)
E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem.
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
root@behzad-desktop:~#root@behzad-desktop:~# dpkg --configure -a
dpkg: ../../src/packages.c:221: process_queue: Assertion `dependtry <= 4' failed.
Aborted
root@behzad-desktop:~#البته این بار yakuake رو نصب کرد!!! ???
-
مشکل من درحال نصب این دو بسته پیش اومد که توی نصب یاکواک هم اسمشونو اورده
lynx-cur lynx-cur-wrapper
root@behzad-desktop:~# aptitude search lynx-cur
W lynx-cur - Text-mode WWW Browser with NLS support (de
u lynx-cur-wrapper - Wrapper for lynx-cur
root@behzad-desktop:~# :'(
root@behzad-desktop:~# aptitude install lynx-cur
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
The following partially installed packages will be configured:
lynx-cur lynx-cur-wrapper
0 packages upgraded, 0 newly installed, 0 to remove and 38 not upgraded.
Need to get 0B of archives. After unpacking 0B will be used.
Writing extended state information... Done
dpkg: error processing lynx-cur (--configure):
package lynx-cur is not ready for configuration
cannot configure (current status `triggers-awaited')
dpkg: ../../src/packages.c:221: process_queue: Assertion `dependtry <= 4' failed.
E: Sub-process /usr/bin/dpkg exited unexpectedly
A package failed to install. Trying to recover:
dpkg: ../../src/packages.c:221: process_queue: Assertion `dependtry <= 4' failed.
Aborted
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
root@behzad-desktop:~#
-
اینو بزن بعد دوباره امتحان کن ببین درست میشه یا نه :
sudo apt-get remove --purge lynx-cur lynx-cur-wrapper
-
خیلی ممنون بهنام جان =D> به همین سادگی درست شد ;D
-
ااااا شانسو بیبین :D
خواهش میکنم ;)