انجمن‌های فارسی اوبونتو

کمک و پشتیبانی => سخت‌افزار => نصب و پیکربندی انواع مودم و اتصال به اینترنت => نویسنده: kases در 19 بهمن 1387، 04:29 ب‌ظ

عنوان: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: kases در 19 بهمن 1387، 04:29 ب‌ظ
سلام دوستان من نرم افزار scanmodem  را اجرا كردم و يك پوشه اي به نام مودم رو دسكتاپ من قرار داد اما من نميدونم چه طوري از مدل  مودم خودم سر در بيارم لطفا راهنمايي كنيد
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: Behnam Golds در 19 بهمن 1387، 04:51 ب‌ظ
فایل خروجی رو بذار اینجا خوب همینطوری که نمیشه.
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: Saman.S در 19 بهمن 1387، 06:17 ب‌ظ
فایل Modem/ModemData.txt را بذار.
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: kases در 19 بهمن 1387، 09:45 ب‌ظ
دوستان ممنون اينم خروجي

 Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.27-7-generic
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686, 
Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008
 scanModem update of:  2009_02_04
The modem symbolic link is /dev/modem -> /dev/536ep0
 There are no blacklisted modem drivers in /etc/modprobe*  files
 Potentially useful modem drivers now loaded are:
         snd_hda_intel       

Attached USB devices are:
 ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External)
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@linmodems.org

For candidate card in slot 04:00.0, firmware information and bootup diagnostics are:
 PCI slot   PCI ID      SubsystemID   Name
 ----------   ---------   ---------   --------------
 04:00.0   14f1:2f30   14f1:2051   Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem

 Modem interrupt assignment and sharing:
  9:          0   IO-APIC-fasteoi   acpi
 --- Bootup diagnostics for card in PCI slot 04:00.0 ----
[    0.411493] PCI: 0000:04:00.0 reg 10 32bit mmio: [ec000000, ec00ffff]
[    0.411502] PCI: 0000:04:00.0 reg 14 io port: [a000, a007]
[    0.411545] pci 0000:04:00.0: PME# supported from D3hot D3cold
[    0.411550] pci 0000:04:00.0: PME# disabled

 The PCI slot 04:00.0 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
 if help is needed.
 

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
 PCI slot   PCI ID      SubsystemID   Name
 ----------   ---------   ---------   --------------
 00:1b.0   8086:27d8   1458:a102   Audio device: Intel Corporation 82801G

 Modem interrupt assignment and sharing:
 16:     191698   IO-APIC-fasteoi   uhci_hcd:usb4, HDA Intel, radeon@pci:0000:01:00.0
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[    0.410213] PCI: 0000:00:1b.0 reg 10 64bit mmio: [ec100000, ec103fff]
[    0.410256] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.410261] pci 0000:00:1b.0: PME# disabled
[   12.060097] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   12.060124] HDA Intel 0000:00:1b.0: setting latency timer to 64

 The PCI slot 00:1b.0 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
 if help is needed.
 


===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.17
The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-02: ALC880 Analog : ALC880 Analog : capture 2
00-01: ALC880 Digital : ALC880 Digital : playback 1
00-00: ALC880 Analog : ALC880 Analog : playback 1 : capture 1

about /proc/asound/cards:
------------------------
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xec100000 irq 16

 PCI slot 00:1b.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko
UNEXPECTED HDA diagnostic outcome.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.3.2
             and the compiler used in kernel assembly: 4.3.2

 The patch utility is needed and is needed for compiling ALSA drivers, and possibly others.

 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.3
   linuc_headers base folder /lib/modules/2.6.27-7-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking settings of:   /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   lrwxrwxrwx 1 root root 11 2009-02-07 04:42 /dev/modem -> /dev/536ep0
slmodemd created symbolic link /dev/ttySL0: 
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: Behnam Golds در 19 بهمن 1387، 09:53 ب‌ظ
PCI slot   PCI ID      SubsystemID   Name
 ----------   ---------   ---------   --------------
 04:00.0   14f1:2f30   14f1:2051   Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem

این خط میگه چیپ ست مودمت conexant hsf  هست.

ویرایش :
البته این هم هست :

PCI slot   PCI ID      SubsystemID   Name
 ----------   ---------   ---------   --------------
 00:1b.0   8086:27d8   1458:a102   Audio device: Intel Corporation 82801G

خروجی lspci  بگیر ببین کدوم رو سیستمت نصبه .
lspci |grep Communication
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: kases در 19 بهمن 1387، 10:00 ب‌ظ
دوست عزيز ممنون از راهنماييتون من از كجا بايد درايور مودمم گير بيارم بازم ممنون
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: Behnam Golds در 19 بهمن 1387، 10:03 ب‌ظ
پست قبلی رو ویرایش کردم اول اینو تست کن بعد برو دنبال درایور :

lspci |grep Communication
با مودم زیاد کار نکردم توی انجمن در موردش زیاد صحبت شده و توی ویکی :
http://forum.ubuntu.ir/index.php/board,15.0.html

http://wiki.ubuntu-ir.org/DialupModemHowto
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: ahmed در 20 بهمن 1387، 08:00 ب‌ظ
لطفا نسخه اوبونتو تون رو بگید+ این خروجی رو بذارید:
uname -r
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: delete در 21 بهمن 1387، 04:14 ب‌ظ
سلام به همگي من تازه كارم يكم راهنماييم كنيد از كجا بايد درايور رو و چه درايوري رو گير بيارم
اينو اسكن مودم نوشته بود
Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.27-7-generic
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686, 
Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008
 scanModem update of:  2009_02_04

 There are no blacklisted modem drivers in /etc/modprobe*  files
 Potentially useful modem drivers now loaded are:
               

Attached USB devices are:
 ID 1241:1111 Belkin Mouse
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@linmodems.org

For candidate card in slot 02:00.0, firmware information and bootup diagnostics are:
 PCI slot PCI ID SubsystemID Name
 ---------- --------- --------- --------------
 02:00.0 14f1:2f30 14f1:205d Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem

 Modem interrupt assignment and sharing:
 --- Bootup diagnostics for card in PCI slot 02:00.0 ----
[    1.102528] PCI: 0000:02:00.0 reg 10 32bit mmio: [f4000000, f400ffff]
[    1.102560] PCI: 0000:02:00.0 reg 14 io port: [9000, 9007]
[    1.102701] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    1.102718] pci 0000:02:00.0: PME# disabled

 The PCI slot 02:00.0 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
 if help is needed.
 

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 02:00.0:
Modem chipset  detected on
NAME="Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem "
CLASS=0780
PCIDEV=14f1:2f30
SUBSYS=14f1:205d
IRQ=11
IDENT=hsfmodem
Driver=hsfmodem-drivers

 For candidate modem in:  02:00.0
   0780 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem
      Primary device ID:  14f1:2f30
 Support type needed or chipset: hsfmodem
 


For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt


Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.27_7_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
  sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm
 From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
 download hsfmodem-7.80.02.01full_k2.6.27_7_generic_ubuntu_i386.deb.zip
 Under Linux unpack with:
 $ unzip hsfmodem*.zip
 Then install with:
 $ sudo dpkg -i hsfmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details.
 
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.3.2
             and the compiler used in kernel assembly: 4.3.2

 The patch utility is needed and is needed for compiling ALSA drivers, and possibly others.

 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.3
   linuc_headers base folder /lib/modules/2.6.27-7-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0: 
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: delete در 21 بهمن 1387، 04:31 ب‌ظ
بازم سلام ببخشيد من الان يه چيزي رو فهميدم كه نميدونم درسته يانه ؟!؟
نوشته كه hsfmodem-7.80.02.01full_k2.6.27_7_generic_ubuntu_i386.deb.zip رو از اين ادرس:
http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
دانلود كنم
ولي ادرس بالايي hsfmodem-7.80.02.01full_k2.6.27_7_generic_ubuntu_i386.deb.zip رو نداره بلكه hsfmodem-7.80.02.02full_k2.6.27_7_generic_ubuntu_i386.deb.zip رو داره حالا چي كار كنم؟!؟!
 ](*,)
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: ahmed در 21 بهمن 1387، 05:29 ب‌ظ
این درایور رو دانلود کنید:
http://www.linuxant.com/drivers/hsf/full/archive/hsfmodem-7.80.02.02full/hsfmodem_7.80.02.02full_k2.6.27_7_generic_ubuntu_i386.deb.zip (http://www.linuxant.com/drivers/hsf/full/archive/hsfmodem-7.80.02.02full/hsfmodem_7.80.02.02full_k2.6.27_7_generic_ubuntu_i386.deb.zip)
بعدش، طبق این راهنماها، به اینترنت وصل بشید:
برای نصب مودم:
http://wiki.ubuntu.ir/DialupModemHowto/Conexant (http://wiki.ubuntu.ir/DialupModemHowto/Conexant)
برای ساخت کانکشن:
http://wiki.ubuntu.ir/DialupModemHowto/SetUpDialer#head-4ca4398f98b2b4833fa0d157e64c360ff492f165 (http://wiki.ubuntu.ir/DialupModemHowto/SetUpDialer#head-4ca4398f98b2b4833fa0d157e64c360ff492f165)
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: delete در 21 بهمن 1387، 06:03 ب‌ظ
ممنون همين كارو كردم ولي اصلا انگار network admin واسه من خيلي فرق داره اصلا مثل اون عكسا نيست و همچين چيزي پيدا نكردم
من از اوبونتو 8.10 استفاده ميكنم
راستي چه طوري ميشه درايور مدم رو پاك كرد چون قبلا يه درايور اشتباهي هم نصب كرده بودم
بازم ممنون
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: Lucid Lynx در 21 بهمن 1387، 06:21 ب‌ظ
 این فکر کنم برات کار کنه

http://ftp.us.dell.com/comm/hsfmodem_7.60.00.06oem_i386.deb (http://ftp.us.dell.com/comm/hsfmodem_7.60.00.06oem_i386.deb)
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: ahmed در 21 بهمن 1387، 07:51 ب‌ظ
ممنون همين كارو كردم ولي اصلا انگار network admin واسه من خيلي فرق داره اصلا مثل اون عكسا نيست و همچين چيزي پيدا نكردم
من از اوبونتو 8.10 استفاده ميكنم
راستي چه طوري ميشه درايور مدم رو پاك كرد چون قبلا يه درايور اشتباهي هم نصب كرده بودم
بازم ممنون

به هیچ وجه نباید از رابط گرافیکی استفاده کرد. چون اصلا کار نمی کنه. تا به حال ندیده ام که کسی با winmodem بتونه راه اندازیش کنه!
از pppconfig یا wvdial استفاده کنید(pppconfig خیلی توصیه می شه)

این فکر کنم برات کار کنه

http://ftp.us.dell.com/comm/hsfmodem_7.60.00.06oem_i386.deb (http://ftp.us.dell.com/comm/hsfmodem_7.60.00.06oem_i386.deb)

این درایور برای hardy بود و برای intrepid کار نمی کنه.
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: delete در 22 بهمن 1387، 12:43 ب‌ظ
ممنون از راهنمايي تون
چه طوري كانكشن بسازم و به اينتر نت وصل بشم من كانكشنو باpppconfig ميسازم ولي نميدونم چه طوري بايد به اينترنت وصل بشم
راستي چه طوري يه درايور رو نصب كرديم حذف كنيم آخه من يه درايور اشتباهي نصب كردم ولي الان بلد نيستم حذفش كنم
ممنون
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: ahmed در 22 بهمن 1387، 01:15 ب‌ظ
نقل‌قول
چه طوري كانكشن بسازم و به اينتر نت وصل بشم من كانكشنو باpppconfig ميسازم ولي نميدونم چه طوري بايد به اينترنت وصل بشم
این طوری:
sudo pon esme connection
**معلومه که به جای esme connection باید اسم کانکشنی که ساخته اید رو وارد کنید!

نقل‌قول
راستي چه طوري يه درايور رو نصب كرديم حذف كنيم آخه من يه درايور اشتباهي نصب كردم ولي الان بلد نيستم حذفش كنم
ببینید اسم درایور چیه. بعد به synaptic برید و درایور رو پیدا کنید و روش راست کلیک کنید و remove رو بزنید و بعد هم Apply رو بزنید.(در بالا)
**synaptic در این مسیر است:
System==>Administration==>Synaptic Package Manager
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: delete در 22 بهمن 1387، 02:39 ب‌ظ
بازم ممنون و بازم سلام
 من موقع کانکشن ساختن میرم تو ترمینال  sudo wvdialconf /etc/wvdial.conf رو میزنم که ببینم مودم از چه در گاهی استفاده میکنه بعد ترمینال اینو مینویسه :
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2   S3   


Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <wvdial-list@lists.nit.ca>.
خوب حالا مودم من از چه در گاهی استفاده میکنه که تو ساخت کانکشن اونو وارد کنم؟!؟!؟
من همون مودمی که گفتید رو دانلود و نصب کردم !!!!
ببخشید که سولات من اصلا به موضوع تا‍یک ربطی نداره جایی پيدا نكردم همينجا زدم
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: Saman.S در 22 بهمن 1387، 02:55 ب‌ظ
بازم ممنون و بازم سلام
 من موقع کانکشن ساختن میرم تو ترمینال  sudo wvdialconf /etc/wvdial.conf رو میزنم که ببینم مودم از چه در گاهی استفاده میکنه بعد ترمینال اینو مینویسه :
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2   S3   


Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <wvdial-list@lists.nit.ca>.
خوب حالا مودم من از چه در گاهی استفاده میکنه که تو ساخت کانکشن اونو وارد کنم؟!؟!؟
من همون مودمی که گفتید رو دانلود و نصب کردم !!!!
ببخشید که سولات من اصلا به موضوع تا‍یک ربطی نداره جایی پيدا نكردم همينجا زدم


مودم شما نصب نشده. به شما پیشنهاد می کنم که برای حل مشکلتان, تاپیک جدید باز کنید.
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: Behnam Golds در 23 بهمن 1387، 03:45 ق‌ظ
بعد از نصب باید دستور زیر رو اجرا کنی تا دیوایس مودم ساخته بشه :
sudo hsfconfig
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: delete در 23 بهمن 1387، 05:54 ب‌ظ
ممنون من الان از اوبونتو کانکت شدم
sudo hsfconfig جواب داد
فقط یه چیزی به اسم License key خواست بد من  FREE زدم الانم سرعتم خیلی ‍ایینه در حد ۱۴ که خودش نوشته چرا ؟!؟! و چی کار باید بکنم
Config for modem unit 0: /dev/ttySHSF0
Device instance: 0-PCI-14f1:2f30-14f1:205d
HW revision    : Basic2 2.18 Standard DAA 3VoltsIA
HW profile name: hsfpcibasic2hsfi
Registration ID: E4BF-CD8D-45A7
License owner  : activelord@gmail.com
License key    : FREE
License status : FREE (max 14.4kbps data only)
Current region : USA (T.35 code: 00B5)

The /dev/modem alias (symlink) points to ttySHSF0

To enable full 56K modem and FAX functionality, enter your license information
with "hsfconfig --license".

License owner and key data must EXACTLY match the information respectively
provided to and by Linuxant. Otherwise, license status will remain "FREE"!
License keyرو باید چی بزنم که سرعتم ۱۴ نشه
ممنون از همگی بایت کمک
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: ahmed در 23 بهمن 1387، 10:34 ب‌ظ
این درایور متاسفانه غیرآزاد هست و برای استفاده کاملش باید به شرکت سازنده پول پرداخت بشه.
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: delete در 24 بهمن 1387، 02:13 ب‌ظ
يني چي؟
دنياي اپن سورس شد اين !!!!
چه اپن سورسيه كه بايد پولم بديم لايسنس بگيريم
تو همون ويندوز كه راحت تر بوديم تازه پولم نميداديم
بابا يكي راهنمايي كنه اينو نميشه كاريش كرد من اينترنت ميخوام؟!؟!؟!
عنوان: پاسخ به: تشخيص ندادن نوع مودم بعد از اجراي برنامه scanmodem
ارسال شده توسط: Behnam Golds در 24 بهمن 1387، 02:22 ب‌ظ
۱)همونطور که دوستان گفتن این درایور غیر آزاده .
۲) اپن سورس به معنای رایگان نیست .
۳)راحت باشید ، حق انتخاب با شماست.
۴)میتونی از روش دزدی استفاده کنی ولی اینجا جای بحثش نیست.