WvDial<Err>: Configuration does not specify a valid phone number.
WvDial<Err>: Configuration does not specify a valid login name.
WvDial<Err>: Configuration does not specify a valid password.
wvdialconf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- OK
ttyS1<*1>: ATQ0 V1 E1 Z -- OK
ttyS1<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyS1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyS1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyS1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyS1<*1>: Modem Identifier: ATI -- 56000
ttyS1<*1>: Speed 4800: AT -- OK
ttyS1<*1>: Speed 9600: AT -- OK
ttyS1<*1>: Speed 19200: AT -- OK
ttyS1<*1>: Speed 38400: AT -- OK
ttyS1<*1>: Speed 57600: AT -- OK
ttyS1<*1>: Speed 115200: AT -- OK
ttyS1<*1>: Max speed is 115200; that should be safe.
ttyS1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Modem Port Scan<*1>: S3
Found a modem on /dev/ttyS1.
Modem configuration written to /etc/wvdial.conf.
ttyS1<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
WvDial<Notice>: Don't know what to do! Starting pppd and hoping for the best.
WvDial<Notice>: Starting pppd at Sun Feb 22 00:41:16 2009
WvDial<Err>: Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
WvDial<Err>: --> PAP (Password Authentication Protocol) may be flaky.
WvDial<Err>: Warning: Could not modify /etc/ppp/chap-secrets: Permission denied
WvDial<Err>: --> CHAP (Challenge Handshake) may be flaky.
WvDial<Notice>: Pid of pppd: 6149
WvDial<*1>: Using interface ppp0
WvDial<*1>: pppd: [10]�[06][08]@�[06][08]
WvDial<*1>: pppd: [10]�[06][08]@�[06][08]
WvDial<*1>: pppd: [10]�[06][08]@�[06][08]
WvDial<*1>: pppd: [10]�[06][08]@�[06][08]
WvDial<*1>: pppd: [10]�[06][08]@�[06][08]
WvDial<*1>: Disconnecting at Sun Feb 22 00:41:17 2009
WvDial<*1>: The PPP daemon has died: Authentication error.
WvDial<*1>: We failed to authenticate ourselves to the peer.
WvDial<*1>: Maybe bad account or password? (exit code = 19)
WvDial<*1>: man pppd explains pppd error codes in more detail.
WvDial<Notice>: I guess that's it for now, exiting
WvDial<Notice>: The PPP daemon has died. (exit code = 19
[Dialer Defaults]
Modem = /dev/ttyS1
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid mode = yes
Modem Type = Analog Modem
Phone=9716004
Username =ns55205zz
Password=1236
ISDN = 0
New PPPD = yes
Carrier check = no
Baud = 115200
فایل رو یه خورده تغییر دادم.سلام خیلی ممنونم مشکل من حل شد . الانم کانکتم ! ممنون
WvDial<*1>: Modem initialized.
WvDial<Err>: Configuration does not specify a valid phone number.
WvDial<Err>: Configuration does not specify a valid login name.
WvDial<Err>: Configuration does not specify a valid password
سلام . مشکل من این پیغام وقتی می خوام به اینترنت وصل بشم با این که درست می زنم اطلاعات رو. در ضمن مودم من اکسترناله ! لطفا کمکم کنید.