سلام
من مودمم مدل creative هست با نرم افزار scanmodem این اطلاعات رو کسب کردم لطفا کمک کنید
Only plain text email is forwarded by the DISCUSS@linmodems.org List Server.
Do use the following as the email Subject Line:
SomeName, YourCountry Ubuntu 6.06.1 LTS kernel 2.6.15-26-386
This will alert cogent experts, and distinguish cases in the Archives.
YourCountry will enable Country Code guidance.
Occassionally responses are blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at
http://www.linmodems.org .
Local Linux experts can be found through:
http://www.linux.org/groups/index.html-------------------------- System information ----------------------------
Ubuntu 6.06.1 LTS
Linux version 2.6.15-26-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006
scanModem update of: 2006_November_07
USB modem not detected by lsusb
Modem or host audio card candidates have firmware information:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
0000:02:09.0 125d:2898 148d:1030 Communication controller: ESS Technology ES2898 Modem
Modem interrupt assignment and sharing:
--- Bootup diagnositcs for card in PCI slot 0000:02:09.0 ----
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
For candidate modem in PCI bus: 0000:02:09.0
Class 0780: 125d:2898 Communication controller: ESS Technology ES2898 Modem
Primary PCI_id 125d:2898
Support type needed or chipset: ESS.com
Vendor=125d is ESS Technologies,
http://www.esstech.com/ The PCI id 125d:2898 modems are Supported under 2.6.n kernels.
The driver resources for 125d:2898 modems should be downloaded
from
http://tx.technion.ac.il/~raindel/ess_2.6-v0.2.tar.gz , benefitting
from an update by Jeff Trull. There are brief instructions at
http://ubuntuforums.org/showthread.php?t=185079 Under Linux, unpack with:
$ tar zxf ess_2.6-v0.2.tar.gz
Move into the folder wit:
$ cd ess_2.6-v0.2
Browse the files therein and run as Root the:
$ sudo ./setup
The setup program creates a port:
$ ls -l /dev/ttyS_ESS0
crw-rw-rw- 1 root root 62, 64 2006-09-23 23:08 /dev/ttyS_ESS0
and a symbolic link to it:
/dev/modem --> /dev/ttyS_ESS0
Specify either /dev/modem or /dev/ttyS_ESS0 as the modem port for dialer utilities.
A file is installed:
/etc/udev/rules.d/ess.rules , with line:
"KERNEL=\"ttyS_ESS0\", SYMLINK=\"modem\""
which supports automated port creation during driver loading.
If the drivers do not autoload during bootup, they can be loaded by:
$ sudo modprobe esscom
after which the driver interdependencies can be displayed by:
$ lsmod | grep esscom
esscom 16580 0
esscom_hw 421328 1 esscom
linmodems 345678 2 esscom esscom_hw
The modem should be found by:
$ sudo wvdialconf wvtest
See wvdial.txt and Testing.txt for follow through details.
===============
For 2.4.n Linux kernels and are there some kludges of fading utility:
http://linmodems.technion.ac.il/archive-fourth/msg00317.html (2004Feb08)
http://andrew.cait.org/ess/ http://sidlo.penguin.cz/ES2838/index_en.html http://tx.technion.ac.il/~raindel/ http://phep2.technion.ac.il/linmodems/archive/msg04424.html There was only formal support under for Linux for kernels 2.2.2.
====== end ESS.com section =======
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
The kernel was compiled with gcc version 4.0.3 and a compiler is not installed
If compiling a modem driver proves to be necessary, one of the two procedures must be followed.
If not yet on the Internet, put the Dapper install CD in the drive
Open a terminal and therein:
$ sudo apt-get install gcc-4.0 make
Additionally the package linux-headers-2.6.15-26-386 must be downloaded.
Go to
http://packages.ubuntu.com/ and search for linux-headers-2.6.15-26-386
After downloading, it can be installed with:
$ sudo dpkg -i linux-header*.deb
Or alternatively if online through Ethernet do:
$ sudo apt-get update
$ sudo apt-get install build-essential
will do all the necessary installations mentioned above.
In either installation case, set a symbolic link which will be expected later:
$ sudo ln -s /usr/bin/gcc-4.0 /usr/bin/gcc
After check with:
$ ls -l /usr/bin/gcc*
which should display:
lrwxrwxrwx 1 root root 16 2006-07-09 21:53 /usr/bin/gcc -> /usr/bin/gcc-4.0
-rwxr-xr-x 1 root root 93584 2006-04-20 18:22 /usr/bin/gcc-4.0
-rwxr-xr-x 1 root root 16245 2006-04-20 18:13 /usr/bin/gccbug-4.0
Kernel-header resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
gcc-4.0 make linux-headers-2.6.15-26-386
Checking pppd properties:
-rwsr-xr-- 1 root dip 257720 2006-07-05 16:30 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.htmlTo enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
auth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/60-symlinks.rules:# Create /dev/modem symlink
/etc/udev/rules.d/60-symlinks.rules:KERNEL=="ttyLTM[0-9]*", SYMLINK+="modem"
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
این اطلاعات رو هم با listmodem تو ویندوز ایکس پس گرفتم
NUMBER OF MODEMS FOUND = 1
MODEM #1:
PCI CONFIGURATION INFORMATION READ:
VENDOR ID : 125D
DEVICE ID : 2898
SUBVENDOR ID : 148D
SUBDEVICE ID : 1030
REVISION ID : 03
DEDUCED INFORMATION:
VENDOR NAME : UNKNOWN
DEVICE NAME : UNKNOWN
SUBVENDOR NAME : BROADXENT --
http://HTTP://WWW.BROADXENT.COM MODEM TYPE : HSF
WINXP INBUILD SUPPORT : NO
موضوع: نصب مودم creative روی ابونتو 6.06 کمک کنید لطفا (دفعات بازدید: 7476 بار)
