کمک برای خواندن خروجی scanModem برای شناسندن مودم zoltrix 3chips

[Thinker's designer - محمدمهدی محمدی]

دوستان ، عزیزان دل برادر

در اینترنت به صورت انگلیسی و فارسی و در داخل انجمن ها هم همینطور به دنبال راهی برای اتصال به اینترنت با مودم zoltrix 3chips گشتم. کارهای گفته شده رو انجام دادم ولی نمی دونم که متصل نمی شم. در داخل فایل scan modem فایلی هست به نام modemData که اون رو به طور کامل خوندم و حتی فایل دیگه ایرو هم که در همین پوشه بود به نام 1stRead رو هم خ.ندم. تا رسیدم به hsf modem که گفته بود که اطریق سایت linuxant اون رو بدست بیارم. انگار نسخۀ مربوط به کرنل بنده در بین آن ها موجود نبود. یکی از دوستان به هم گفتند که کرنلم رو پاک یا آپدیت کنم و به عبارت دیگر برنامه رو کامیال کنم بر روی این کرنل. تو همچین مای هایی. خب من هم سوادم به کامپایل کردن نمی رسه. اگر وقت کردم انشاءالله 100 در 100 نگاهی به این موضوع هم می اندازم تا بتونم یادی بگیرم.

با خود گفتم که شاید من دارم فایل modemData و 1stRead رو شاید بد می خونم. به همین خاطر تصمیم گرفتم که فایل ها و خروجی دیوایسم رو براتو بزارم که شما با خواندنش  بنده رو در شناساندن این مودم به دنیای اینترنت کمک کنید. از طرفی اگر تک تک مراحل نصب و راه اندازی بگید و یا اینکه آدرسش به من بدهید کمک بزرگی به بنده کردید. چون اینقدر مطلب ریخته که موندم کدومش کمکم می کنه و جواب بنده هست.

از طرفی دوستان اگر زحمتتون نمی شه می تونید بگید که کجاهای این دو فال رو برای فهمیدن شرایط انجام کار باید خوند؟

خروجی فایل scanModem

کد: [انتخاب]

Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.28-18-generic
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686,  Ubuntu ,  ALSA_version=1.0.18
Linux version 2.6.28-18-generic (buildd@rothera) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #59-Ubuntu SMP Thu Jan 28 01:23:03 UTC 2010
 scanModem update of:  2010_05_29

Distrib_ID=Ubuntu
DistribCodeName=jaunty
AptRepositoryStem=http://de.archive.ubuntu.com/ubuntu/


Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel.  For details see http://linux.dell.com/projects.shtml#dkms

 There are no blacklisted modem drivers in /etc/modprobe*  files

 Potentially useful modem drivers now loaded are:
       snd_hda_intel          

Attached USB devices are:
 ID 1241:1166 Belkin MI-2150 Trust Mouse
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:  http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@linmodems.org

Candidate PCI devices with modem chips are:
03:07.0 Communication controller: Conexant Systems, Inc. Conexant SoftK56 Data/Fax Modem (rev 01)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
High Definition Audio cards can host modem chips.

For candidate card in slot 03:07.0, firmware information and bootup diagnostics are:
 PCI slot PCI ID SubsystemID Name
 ---------- --------- --------- --------------
 03:07.0 14f1:2f50 14f1:205f Communication controller: Conexant Systems, Inc. Conexant SoftK56 Data/Fax Modem

 Modem interrupt assignment and sharing:
 --- Bootup diagnostics for card in PCI slot 03:07.0 ----
[    0.441738] pci 0000:03:07.0: reg 10 32bit mmio: [0xfeaf0000-0xfeafffff]
[    0.441747] pci 0000:03:07.0: reg 14 io port: [0xe800-0xe807]
[    0.441791] pci 0000:03:07.0: PME# supported from D3hot D3cold
[    0.441796] pci 0000:03:07.0: PME# disabled

 The PCI slot 03:07.0 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
 if help is needed.
 

For candidate card in slot 00:14.2, firmware information and bootup diagnostics are:
 PCI slot PCI ID SubsystemID Name
 ---------- --------- --------- --------------
 00:14.2 1002:4383 1043:82bb Audio device: ATI Technologies Inc SBx00 Azalia

 Modem interrupt assignment and sharing:
 16:        280      88036   IO-APIC-fasteoi   ohci_hcd:usb2, HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:14.2 ----
[    0.441124] pci 0000:00:14.2: reg 10 64bit mmio: [0xf9ff4000-0xf9ff7fff]
[    0.441160] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.441164] pci 0000:00:14.2: PME# disabled
[   87.583011] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16

 The PCI slot 00:14.2 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
 if help is needed.
 

 New HCF.HSF device 1002:4383
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 00:14.2:
Modem chipset  detected on
NAME="Audio device: ATI Technologies Inc SBx00 Azalia "
package="both hcfpcimodem and hsfmodem"
CLASS=0403
PCIDEV=1002:4383
SUBSYS=1043:82bb
IRQ=16
IDENT=HCF.HSF

 For candidate modem in:  00:14.2
   0403 Audio device: ATI Technologies Inc SBx00 Azalia
      Primary device ID:  1002:4383
 Support type needed or chipset: HCF.HSF
 


For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt

 1002:4383 could be either a HSF or HCF Conexant modem, because of ambiguous
 use of the PCI ID by modem assemblers. First try the hcfpcimodem package.
 If the installation aborts, then use the hsfmodem package. Read DOCs/Conexant.txt
 for details and Modem/DOCs/YourSystem.txt for follow through guidance.


For all code packages from Linuxant.com, either a driver set matching the boot kernel will be installed,
or the drivers will first be compiled and then installed. The expert on modem software for Linux is
"Support (Jonathan)" <modem.support@linuxant.com>

 From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
 download hsfmodem-7.80.02.06full_k2.6.28_18_generic_ubuntu_i386.deb.zip
 Under Linux unpack with:
 $ unzip hsfmodem*.zip
 Then install with:
 $ sudo dpkg -i hsfmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details.
 
 The directions following below need only be pursued, if the above procedures are not adequate.

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.28_18_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, the needed drivers
will be auto compiled anyway. Alternatively, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
  sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt



Predictive  diagnostics for card in bus 03:07.0:
Modem chipset  detected on
NAME="Communication controller: Conexant Systems, Inc. Conexant SoftK56 Data/Fax Modem "
CLASS=0780
PCIDEV=14f1:2f50
SUBSYS=14f1:205f
IRQ=11
HDA2=00:14.2
IDENT=hsfmodem
Driver=hsfmodem-drivers

 For candidate modem in:  03:07.0
   0780 Communication controller: Conexant Systems, Inc. Conexant SoftK56 Data/Fax Modem
      Primary device ID:  14f1:2f50
 Support type needed or chipset: hsfmodem
 


For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt

 Support for the 14f1:2f50  and 14f1:2215 HSF modems is projected early in 2007 from Linuxant.

For all code packages from Linuxant.com, either a driver set matching the boot kernel will be installed,
or the drivers will first be compiled and then installed. The expert on modem software for Linux is
"Support (Jonathan)" <modem.support@linuxant.com>

 From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
 download hsfmodem-7.80.02.06full_k2.6.28_18_generic_ubuntu_i386.deb.zip
 Under Linux unpack with:
 $ unzip hsfmodem*.zip
 Then install with:
 $ sudo dpkg -i hsfmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details.
 
 The directions following below need only be pursued, if the above procedures are not adequate.

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.28_18_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, the needed drivers
will be auto compiled anyway. Alternatively, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
  sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.3.3
             and the compiler used in kernel assembly: 4.3.3


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.3
   linuc_headers base folder /lib/modules/2.6.28-18-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.


Compressed files at: /usr/src/alsa-driver.tar.bz2 /usr/src/cdfs.tar.bz2 /usr/src/fusd-kor.tar.bz2 /usr/src/gspca.tar.bz2 /usr/src/line6-usb.tar.bz2 /usr/src/linux-wlan-ng.tar.bz2 /usr/src/ov51x-jpeg.tar.bz2


If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
-rwsr-xr-- 1 root dip 277352 2009-02-20 20:55 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:  
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


خروجی فایل 1stRead

کد: [انتخاب]

If you want help from the email group Discuss@linmodems.org, PLEASE join the List
at http://www.linmodems.org . Otherwise your messages will be delayed until the evening,
waiting for someone to verify it is not junk mail, before forwarding through the List server.
  
The files in this Modem/ folder have the following roles:

ModemData.txt - Diagnostics and accumulated information cogent to your modem and host system.
     This is the ONLY file which should be sent to the List  DISCUSS@LINMODEMS.ORG ,
     if further help is needed. Send your email and attachments as plain text as
     other formats are rejected by the List Server, to avoid virus transmission.
     Always send the ENTIRE ModemData.txt,  as It includes subtle diagnostic ouputs needed
     to best guide you. Please in the covering email mention your Country, to enable Country
     specific advice.
     Always use the most recent update of scanModem accessed ONLY at
  http://linmodems.technion.ac.il/packages/scanModem.gz
     to produce ModemData.txt
     URLs to cogent advice are regularly updated, so your problem may be solved therein.
     Please Do NOT send  Do NOT send other files in this folder Modem/

Several informative files without diagnostics are in the DOCs subfolder.
A file(s) specific to your modem chipset will be written, such as:
  Smartlink.txt, Conexant.txt, Intel.txt , etc

YourModem.txt - Guidance about operating your particular System, for your benefit
     It should NOT be sent to Discuss@linmodems.org

Rational.txt - Motivations of this scanModem package.  

DriverCompiling.txt -  Explains the roles of additional files which may have to be installed
   to support compiling of modem drivers, and the steps to take.  

SoftModem.txt - Information and instructions about "soft modems".
     For these modems, additional steps may be necessary for choice of supporting software.
     The primary PCI ID is that of the host audio or modem controller, which can support diverse Subsystems. It is the chipset of the Subsystem which determines the software needed.

ModemTesting.txt SHOULD be read, but after drivers have been installed.

InfoGeneral.txt has general information about the status of winmodem support under Linux,
    Do read it if ModemData.txt  reports that your current modem is not supported under Linux.

Unsubscribe.txt - Howto terminate email tranmissions from the List.

If you are Linux newcomer, please do locate your local Linux group through:
    http://www.linux.org/groups/index.html  .  If you are not comfortable with English,
    a local Linux user can often be of substantial assistance in getting you on to the Internet.
 

تشکر فراوان

 

[defy]

سلام دوست عزیز
شما مودم  Conexant  داری
منم مودمم از این نوع بود خیلی سعی کردم بتونم باهاش کانکت شم ولی متاسفانه نشد
این نوع مودم زیاد با لینوکس سازگاری نداره
من مودمم رو عوض کردم و usb گرفتم

کد: [انتخاب]

Candidate PCI devices with modem chips are:
03:07.0 Communication controller: Conexant Systems, Inc. Conexant SoftK56 Data/Fax Modem (rev 01)

modem chips نوع مودم رو نشون می ده
موفق باشی