کمک در نصب مودم DialUp مدل D-Link در Ubuntu9.10

[MHM5000]

سلام خدمت همه عزیزان...
جهت نصب مودم DialUp مدل D-Link در UBUNTU 9.10 قدمی برداشتم و با ScanModem اطلاعات رو بدست آوردم که به شرح زیره:

کد: [انتخاب]

Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.31-14-generic
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686,  Ubuntu ,  ALSA_version=1.0.20
Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009
 scanModem update of:  2010_05_29

Distrib_ID=Ubuntu
DistribCodeName=karmic
AptRepositoryStem=http://ir.archive.ubuntu.com/ubuntu/


Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel.  For details see http://linux.dell.com/projects.shtml#dkms

 There are no blacklisted modem drivers in /etc/modprobe*  files

 Potentially useful modem drivers now loaded are:
       snd_hda_intel           

Attached USB devices are:
 ID 1241:1166 Belkin MI-2150 Trust Mouse
 ID 043e:70f1 LG Electronics USA, Inc.
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:  http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@linmodems.org

Candidate PCI devices with modem chips are:
05:00.0 Communication controller: Conexant Systems, Inc. HSF 56k HSFi Modem (rev 01)
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
High Definition Audio cards can host modem chips.

For candidate card in slot 05:00.0, firmware information and bootup diagnostics are:
 PCI slot PCI ID SubsystemID Name
 ---------- --------- --------- --------------
 05:00.0 14f1:2f00 14f1:2003 Communication controller: Conexant Systems, Inc. HSF 56k HSFi Modem

 Modem interrupt assignment and sharing:
 --- Bootup diagnostics for card in PCI slot 05:00.0 ----
[    0.187491] pci 0000:05:00.0: reg 10 32bit mmio: [0xfebf0000-0xfebfffff]
[    0.187496] pci 0000:05:00.0: reg 14 io port: [0xec00-0xec07]
[    0.187530] pci 0000:05:00.0: PME# supported from D3hot D3cold
[    0.187533] pci 0000:05:00.0: PME# disabled

 The PCI slot 05:00.0 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
 if help is needed.
 

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
 PCI slot PCI ID SubsystemID Name
 ---------- --------- --------- --------------
 00:1b.0 8086:3a3e 1043:82fe Audio device: Intel Corporation 82801JI

 Modem interrupt assignment and sharing:
 22:        953        982   IO-APIC-fasteoi   HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[    0.186267] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ff8000-0xf9ffbfff]
[    0.186300] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.186303] pci 0000:00:1b.0: PME# disabled
[    8.499227] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    8.499250] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    8.777322] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5

 The PCI slot 00:1b.0 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
 if help is needed.
 

 New HCF.HSF device 8086:3a3e
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 00:1b.0:
Modem chipset  detected on
NAME="Audio device: Intel Corporation 82801JI "
package="both hcfpcimodem and hsfmodem"
CLASS=0403
PCIDEV=8086:3a3e
SUBSYS=1043:82fe
IRQ=22
IDENT=HCF.HSF

 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 82801JI
      Primary device ID:  8086:3a3e
 Support type needed or chipset: HCF.HSF
 


Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt

 8086:3a3e could be either a HSF or HCF Conexant modem, because of ambiguous
 use of the PCI ID by modem assemblers. First try the hcfpcimodem package.
 If the installation aborts, then use the hsfmodem package. Read DOCs/Conexant.txt
 for details and Modem/DOCs/YourSystem.txt for follow through guidance.


For all code packages from Linuxant.com, either a driver set matching the boot kernel will be installed,
or the drivers will first be compiled and then installed. The expert on modem software for Linux is
"Support (Jonathan)" <modem.support@linuxant.com>

 From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
 download hsfmodem-7.80.02.06full_k2.6.31_14_generic_ubuntu_i386.deb.zip
 Under Linux unpack with:
 $ unzip hsfmodem*.zip
 Then install with:
 $ sudo dpkg -i hsfmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details.
 
 The directions following below need only be pursued, if the above procedures are not adequate.

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.31_14_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, the needed drivers
will be auto compiled anyway. Alternatively, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
  sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt



Predictive  diagnostics for card in bus 05:00.0:
Modem chipset  detected on
NAME="Communication controller: Conexant Systems, Inc. HSF 56k HSFi Modem "
CLASS=0780
PCIDEV=14f1:2f00
SUBSYS=14f1:2003
IRQ=10
HDA2=00:1b.0
IDENT=hsfmodem
Driver=hsfmodem-drivers

 For candidate modem in:  05:00.0
   0780 Communication controller: Conexant Systems, Inc. HSF 56k HSFi Modem
      Primary device ID:  14f1:2f00
 Support type needed or chipset: hsfmodem
 


For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt


For all code packages from Linuxant.com, either a driver set matching the boot kernel will be installed,
or the drivers will first be compiled and then installed. The expert on modem software for Linux is
"Support (Jonathan)" <modem.support@linuxant.com>

 From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
 download hsfmodem-7.80.02.06full_k2.6.31_14_generic_ubuntu_i386.deb.zip
 Under Linux unpack with:
 $ unzip hsfmodem*.zip
 Then install with:
 $ sudo dpkg -i hsfmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details.
 
 The directions following below need only be pursued, if the above procedures are not adequate.

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.31_14_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, the needed drivers
will be auto compiled anyway. Alternatively, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
  sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.4.1
             and the compiler used in kernel assembly: 4.4.1

 The patch utility is needed for compiling ALSA drivers, and possibly others.

 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.4
   linuc_headers base folder /lib/modules/2.6.31-14-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0: 
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------
خوشحال میشم کمکم کنید

[Majidjan]

سلام.
این لینک را دنبال کنید:

کد: [انتخاب]

http://wiki.ubuntu.ir/?action=fullsearch&context=180&value=DialupModemHowto&titlesearch=

[MHM5000]

آقا ایمان(eMan) لطف کردند و بنده رو تا مرحله ای راهنمایی کردند!
ایشون فایلی با نام "hsfmodem_7.80.02.06full_k2.6.31_14_generic_ubuntu_i386.deb" رو برای بنده ارسال کردند.
منتها من فراموش کردم از ایشون طریقه نصب این فایل رو بپرسم...
طریقه نصب همون شیوه ایه که در این لینک گفته شده؟ ::

کد: [انتخاب]

http://wiki.ubuntu.ir/DialupModemHowto/Intel536EP

[RCLord]

طریقه نصب نداره . دو بار روش کلیک کنید . نصب میشه .