سلام
من با راه اندازی محیط سه بعدی اوبونتو 7.04 مشکل دارم.
درایور کارت گرافیک رو هم نصب کردم و تیک اون رو هم زدم.
وقتی روی "desktop visual effect" کلیک میکنم این پیغام میاد:
The Composite extension is not available
کارت گرافیکم انبورد ATIx1250 هست. مینبورد هم giga ma-69gh-s3h هست. رم 1024
برنامه Compiz Check رو هم نصب و اجرا کردم. خروجی این برنامه بعلاوه خروجی دستوراتی که به بقیه دوستان داده بودید اینه:
m@m-desktop:~$ compiz-check
Gathering information about your system...
Distribution: Ubuntu 7.04
Desktop environment: GNOME
Graphics chip: ATI Technologies Inc Unknown device 791e
Driver in use: fglrx
Rendering method: AIGLX
Checking if it's possible to run Compiz on your system...
Checking for texture_from_pixmap... [FAIL]
Checking for non power of two support... [ OK ]
Checking for composite extension... [FAIL]
Checking for FBConfig... [ OK ]
Checking for hardware/setup problems... [FAIL]
There has been (at least) one error detected with your setup:
Error: The version of fglrx in use (2.0.6334) needs Xgl to work with Compiz.
Would you like to know more? (Y/n) y
Older versions of fglrx do not support AIGLX, so you have to use Xgl in order
to make Compiz run with this driver.
You can either install Xgl or a newer version of the fglrx driver.
m@m-desktop:~$ glxinfo | grep direct
direct rendering: Yes
m@m-desktop:~$ lspci |grep VGA
01:05.0 VGA compatible controller: ATI Technologies Inc Unknown device 791e
m@m-desktop:~$ $glxgears
m@m-desktop:~$ $ sudo cat /etc/X11/xorg.conf
bash: $: command not found
m@m-desktop:~$ $sudo cat /etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
# path to defoma fonts
Fontpath "/usr/share/fonts/X11/misc"
Fontpath "/usr/share/fonts/X11/100dpi:unscaled"
Fontpath "/usr/share/fonts/X11/75dpi:unscaled"
Fontpath "/usr/share/fonts/X11/Type1"
Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
Fontpath "/usr/local/share/fonts"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "fglrx"
Busid "PCI:1:5:0"
EndSection
Section "Monitor"
Identifier "S/M 755DFT"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "S/M 755DFT"
Defaultdepth 24
SubSection "Display"
Depth 1
Modes "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "stylus" "SendCoreEvents"
Inputdevice "cursor" "SendCoreEvents"
Inputdevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "0"
EndSection
در تاپیک قدیمی برای کارت گرافیک nVidia برنامه دادید. برای ATI هم بدید
در ضمن من اینترنت نفتی دارم. لطف کنید اگر برنامه ای باید نصب کنم لینک مستقیم بدید تا بتون برای اینده هم ذخیره کنم و نیاز به دانلود مجدد برای اینده نباشه.
از دوستان اصفهانی کسی هست اوبونتو 8.04 رو داشته باشه ازش بگیرم؟
پیشاپیش ممنونم
موضوع: مشکل با راه اندازی محیط سه بعدی اوبونتو 7.04 با کارت گرافیک انبورد ATI (دفعات بازدید: 1867 بار)
