با همین تنظیم bumblebee که دادی :
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-331
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-331:/usr/lib32/nvidia-331
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-331/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
الان اجرا میشن اما خروجی دستور sudo /usr/sbin/bumblebeed -vv --driver nvidia هنوز nvidia-current رو زده ...!!
[ 599.698569] [DEBUG]Found card: 01:00.0 (discrete)
[ 599.698632] [DEBUG]Found card: 00:02.0 (integrated)
[ 599.698654] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 599.699092] [DEBUG]Skipping auto-detection, using configured driver 'nvidia'
[ 599.699268] [DEBUG]Process /sbin/modprobe started, PID 8237.
[ 599.699335] [DEBUG]Hiding stderr for execution of /sbin/modprobe
[ 599.700473] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 599.700594] [DEBUG]bbswitch has been detected.
[ 599.700659] [INFO]Switching method 'bbswitch' is available and will be used.
[ 599.700690] [DEBUG]Active configuration:
[ 599.700712] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 599.700736] [DEBUG] X display: :8
[ 599.700759] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-current:/usr/lib32/nvidia-current
[ 599.700782] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 599.700809] [DEBUG] pidfile: /var/run/bumblebeed.pid
[ 599.700830] [DEBUG] xorg.conf file: /etc/bumblebee/xorg.conf.nvidia
[ 599.700857] [DEBUG] xorg.conf.d dir: /etc/bumblebee/xorg.conf.d
[ 599.700879] [DEBUG] ModulePath: /usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules
[ 599.700906] [DEBUG] GID name: bumblebee
[ 599.700928] [DEBUG] Power method: auto
[ 599.700955] [DEBUG] Stop X on exit: 1
[ 599.700977] [DEBUG] Driver: nvidia
[ 599.701004] [DEBUG] Driver module: nvidia-current
[ 599.701026] [DEBUG] Card shutdown state: 1
[ 599.701175] [DEBUG]Process /sbin/modprobe started, PID 8238.
[ 599.701232] [DEBUG]Hiding stderr for execution of /sbin/modprobe
[ 599.702213] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 599.702291] [ERROR]Module 'nvidia-current' is not found.
خروجی dmesg :
[ 4.150035] cpuidle: using governor ladder
[ 4.150235] cpuidle: using governor menu
[ 4.150244] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.150325] TCP: cubic registered
[ 4.150410] NET: Registered protocol family 10
[ 4.150577] NET: Registered protocol family 17
[ 4.150585] Key type dns_resolver registered
[ 4.150846] PM: Hibernation image not present or could not be loaded.
[ 4.150850] Loading module verification certificates
[ 4.151789] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 0d2f067ae81edbe7efb6ee2c61c63d9bdcf0659d'
[ 4.151798] registered taskstats version 1
[ 4.153946] Key type trusted registered
[ 4.156153] Key type encrypted registered
[ 4.158517] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.158998] Magic number: 5:909:582
[ 4.159020] pci_bus 0000:03: hash matches
[ 4.159111] rtc_cmos 00:05: setting system clock to 2013-11-21 12:34:24 UTC (1385037264)
[ 4.160489] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.160491] EDD information not available.
[ 4.161272] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[ 4.161273] Write protecting the kernel read-only data: 12288k
[ 4.163137] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 4.163245] Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
[ 4.164975] Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
[ 4.173731] systemd-udevd[144]: starting version 204
[ 4.187685] mii: module verification failed: signature and/or required key missing - tainting kernel
[ 4.188594] ahci 0000:00:1f.2: version 3.0
[ 4.188747] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 4.190149] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.190159] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 4.190360] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[ 4.190545] r8169 0000:02:00.0 eth0: RTL8105e at 0xffffc90000c6a000, 20:1a:06:23:15:0e, XID 00c00000 IRQ 43
[ 4.202468] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x6 impl SATA mode
[ 4.202474] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 4.202481] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.210803] scsi0 : ahci
[ 4.210871] scsi1 : ahci
[ 4.210924] scsi2 : ahci
[ 4.210976] scsi3 : ahci
[ 4.211030] scsi4 : ahci
[ 4.211080] scsi5 : ahci
[ 4.211105] ata1: DUMMY
[ 4.211108] ata2: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617180 irq 42
[ 4.211110] ata3: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617200 irq 42
[ 4.211111] ata4: DUMMY
[ 4.211112] ata5: DUMMY
[ 4.211112] ata6: DUMMY
[ 4.418570] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 4.530676] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.530695] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.535406] ata3.00: ATAPI: PLDS DVD-RW DU8A5SH, NL61, max UDMA/100
[ 4.536756] ata3.00: configured for UDMA/100
[ 4.537053] ata2.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR20002, max UDMA/100
[ 4.537056] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.543434] ata2.00: configured for UDMA/100
[ 4.543699] scsi 1:0:0:0: Direct-Access ATA ST1000LM024 HN-M 2AR2 PQ: 0 ANSI: 5
[ 4.543836] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.543838] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 4.543840] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 4.543885] sd 1:0:0:0: [sda] Write Protect is off
[ 4.543888] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.543900] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.548359] scsi 2:0:0:0: CD-ROM PLDS DVD-RW DU8A5SH NL61 PQ: 0 ANSI: 5
[ 4.550991] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.550997] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.551156] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.551160] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.551301] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.551373] hub 1-1:1.0: USB hub found
[ 4.551374] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 4.551453] hub 1-1:1.0: 6 ports detected
[ 4.595872] sda: sda1 sda2 sda3 < sda5 > sda4
[ 4.596718] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.662725] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.795127] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.795133] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.795497] hub 2-1:1.0: USB hub found
[ 4.795598] hub 2-1:1.0: 6 ports detected
[ 4.962877] usb 3-4: new high-speed USB device number 2 using xhci_hcd
[ 4.982902] tsc: Refined TSC clocksource calibration: 2095.239 MHz
[ 5.062060] usb 3-4: New USB device found, idVendor=174f, idProduct=146d
[ 5.062066] usb 3-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 5.062070] usb 3-4: Product: Lenovo EasyCamera
[ 5.062073] usb 3-4: Manufacturer: Generic
[ 5.062076] usb 3-4: SerialNumber: 200901010001
[ 5.118322] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.139035] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 5.233498] usb 1-1.1: New USB device found, idVendor=8564, idProduct=1000
[ 5.233504] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.233508] usb 1-1.1: Product: Mass Storage Device
[ 5.233511] usb 1-1.1: Manufacturer: JetFlash
[ 5.233513] usb 1-1.1: SerialNumber: 18B4472SU7F9JXI5
[ 5.303113] usb 1-1.2: new low-speed USB device number 4 using ehci-pci
[ 5.399717] usb 1-1.2: New USB device found, idVendor=1d57, idProduct=0008
[ 5.399723] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.399726] usb 1-1.2: Product: 2.4G Wireless Optical Mouse
[ 5.471380] usb 1-1.3: new full-speed USB device number 5 using ehci-pci
[ 5.567901] usb 1-1.3: New USB device found, idVendor=8087, idProduct=07da
[ 5.567907] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.983626] Switched to clocksource tsc
[ 12.097670] Adding 3905532k swap on /dev/sda5. Priority:-1 extents:1 across:3905532k FS
[ 12.271495] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.335071] systemd-udevd[335]: starting version 204
[ 12.472807] input: Ideapad extra buttons as /devices/platform/ideapad/input/input4
[ 12.478712] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[ 12.478718] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.478723] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 12.478727] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251)
[ 12.478729] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.478730] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[ 12.478732] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251)
[ 12.478735] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.478736] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 12.479108] mei_me 0000:00:16.0: setting latency timer to 64
[ 12.479158] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 12.479891] [drm] Initialized drm 1.1.0 20060810
[ 12.492097] cfg80211: Calling CRDA to update world regulatory domain
[ 12.495719] [drm] Memory usable by graphics device = 2048M
[ 12.495728] i915 0000:00:02.0: setting latency timer to 64
[ 12.497778] Bluetooth: Core ver 2.16
[ 12.497790] NET: Registered protocol family 31
[ 12.497791] Bluetooth: HCI device and connection manager initialized
[ 12.497797] Bluetooth: HCI socket layer initialized
[ 12.497798] Bluetooth: L2CAP socket layer initialized
[ 12.497802] Bluetooth: SCO socket layer initialized
[ 12.498780] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 12.499176] usbcore: registered new interface driver btusb
[ 12.502448] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 12.502450] Copyright(c) 2003-2013 Intel Corporation
[ 12.502544] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 12.502666] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
[ 12.512938] lp: driver loaded but no devices found
[ 12.527821] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 12.527829] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 12.527830] [drm] Driver supports precise vblank timestamp query.
[ 12.527845] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
[ 12.527874] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
[ 12.527919] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 12.572816] fbcon: inteldrmfb (fb0) is primary device
[ 12.603718] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 12.604099] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 12.604455] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 12.604870] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
[ 12.605262] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
[ 12.605579] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
[ 12.606176] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
[ 12.606411] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 12.612467] kvm: disabled by bios
[ 12.627159] type=1400 audit(1385024672.962:2): apparmor="STATUS" operation="profile_load" parent=374 profile="unconfined" name="/sbin/dhclient" pid=442 comm="apparmor_parser"
[ 12.627163] type=1400 audit(1385024672.962:3): apparmor="STATUS" operation="profile_load" parent=374 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=442 comm="apparmor_parser"
[ 12.627165] type=1400 audit(1385024672.962:4): apparmor="STATUS" operation="profile_load" parent=374 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=442 comm="apparmor_parser"
[ 12.627172] type=1400 audit(1385024672.962:5): apparmor="STATUS" operation="profile_replace" parent=420 profile="unconfined" name="/sbin/dhclient" pid=441 comm="apparmor_parser"
[ 12.627177] type=1400 audit(1385024672.962:6): apparmor="STATUS" operation="profile_replace" parent=420 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=441 comm="apparmor_parser"
[ 12.627179] type=1400 audit(1385024672.962:7): apparmor="STATUS" operation="profile_replace" parent=420 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=441 comm="apparmor_parser"
[ 12.627589] type=1400 audit(1385024672.962:8): apparmor="STATUS" operation="profile_replace" parent=374 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=442 comm="apparmor_parser"
[ 12.627592] type=1400 audit(1385024672.962:9): apparmor="STATUS" operation="profile_replace" parent=374 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=442 comm="apparmor_parser"
[ 12.627603] type=1400 audit(1385024672.962:10): apparmor="STATUS" operation="profile_replace" parent=420 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=441 comm="apparmor_parser"
[ 12.627606] type=1400 audit(1385024672.962:11): apparmor="STATUS" operation="profile_replace" parent=420 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=441 comm="apparmor_parser"
[ 12.633298] kvm: disabled by bios
[ 12.651960] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 12.667127] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 12.667128] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 12.667128] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 12.667129] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
[ 12.667130] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[ 12.667226] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 12.685923] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 12.730213] cfg80211: World regulatory domain updated:
[ 12.730213] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.730214] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.730215] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.730215] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.730216] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.730216] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.868640] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 12.868695] scsi6 : usb-storage 1-1.1:1.0
[ 12.868779] usbcore: registered new interface driver usb-storage
[ 12.870778] Linux video capture interface: v2.00
[ 12.875368] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (174f:146d)
[ 12.880776] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input5
[ 12.880827] usbcore: registered new interface driver uvcvideo
[ 12.880828] USB Video Class driver (1.1.1)
[ 12.960469] hidraw: raw HID events driver (C) Jiri Kosina
[ 13.019536] usbcore: registered new interface driver usbhid
[ 13.019536] usbhid: USB HID core driver
[ 13.057690] input: 2.4G Wireless Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input6
[ 13.057982] hid-generic 0003:1D57:0008.0001: input,hidraw0: USB HID v1.10 Mouse [2.4G Wireless Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[ 13.234217] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f01)
[ 13.259326] psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x15, 0x0e.
[ 13.355649] Console: switching to colour frame buffer device 170x48
[ 13.357630] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.357631] i915 0000:00:02.0: registered panic notifier
[ 13.357769] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 13.360179] acpi device:37: registered as cooling_device9
[ 13.360290] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 13.360325] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input7
[ 13.368566] acpi device:43: registered as cooling_device10
[ 13.368674] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 13.368703] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 13.368819] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 13.368955] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 13.379904] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
[ 13.382335] SKU: Nid=0x1d sku_cfg=0x40148505
[ 13.382337] SKU: port_connectivity=0x1
[ 13.382338] SKU: enable_pcbeep=0x1
[ 13.382339] SKU: check_sum=0x00000004
[ 13.382340] SKU: customization=0x00000085
[ 13.382340] SKU: external_amp=0x0
[ 13.382341] SKU: platform_type=0x1
[ 13.382342] SKU: swap=0x0
[ 13.382343] SKU: override=0x1
[ 13.382566] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 13.382567] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.382568] hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 13.382568] mono: mono_out=0x0
[ 13.382569] inputs:
[ 13.382571] Mic=0x18
[ 13.382572] Internal Mic=0x12
[ 13.382573] realtek: No valid SSID, checking pincfg 0x40148505 for NID 0x1d
[ 13.382574] realtek: Enabling init ASM_ID=0x8505 CODEC_ID=10ec0269
[ 13.390629] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.390688] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 13.390737] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 13.848196] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 14.088206] scsi 6:0:0:0: Direct-Access JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 4
[ 14.088584] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 14.089120] sd 6:0:0:0: [sdb] 15667200 512-byte logical blocks: (8.02 GB/7.47 GiB)
[ 14.089871] sd 6:0:0:0: [sdb] Write Protect is off
[ 14.089874] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 14.090742] sd 6:0:0:0: [sdb] No Caching mode page found
[ 14.090768] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 14.094119] sd 6:0:0:0: [sdb] No Caching mode page found
[ 14.094141] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 14.095057] sdb: sdb4
[ 14.098426] sd 6:0:0:0: [sdb] No Caching mode page found
[ 14.098449] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 14.098481] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 15.072950] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 15.333452] init: failsafe main process (703) killed by TERM signal
[ 15.584099] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.584103] Bluetooth: BNEP filters: protocol multicast
[ 15.584111] Bluetooth: BNEP socket layer initialized
[ 15.587267] Bluetooth: RFCOMM TTY layer initialized
[ 15.587278] Bluetooth: RFCOMM socket layer initialized
[ 15.587280] Bluetooth: RFCOMM ver 1.11
[ 15.992358] ppdev: user-space parallel port driver
[ 16.047033] init: avahi-cups-reload main process (868) terminated with status 1
[ 16.282577] init: nvidia-persistenced main process (997) terminated with status 1
[ 17.324774] r8169 0000:02:00.0 eth0: link down
[ 17.324807] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.325101] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.326695] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 17.334436] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[ 17.576684] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 17.584401] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[ 17.644758] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.645116] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.071590] bbswitch: version 0.7
[ 18.071595] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 18.071598] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 18.071607] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 18.071745] bbswitch: detected an Optimus _DSM function
[ 18.071785] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 18.073370] bbswitch: disabling discrete graphics
[ 18.073377] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 18.097148] pci 0000:01:00.0: power state changed by ACPI to D3cold
[ 18.704995] wlan0: authenticate with bc:ae:c5:a6:36:5c
[ 18.713163] wlan0: send auth to bc:ae:c5:a6:36:5c (try 1/3)
[ 18.715750] wlan0: authenticated
[ 18.722544] wlan0: associate with bc:ae:c5:a6:36:5c (try 1/3)
[ 18.727914] wlan0: RX AssocResp from bc:ae:c5:a6:36:5c (capab=0x411 status=0 aid=1)
[ 18.731625] wlan0: associated
[ 18.731667] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 18.731738] cfg80211: Calling CRDA for country: GB
[ 18.733959] cfg80211: Regulatory domain changed to country: GB
[ 18.733963] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.733965] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 18.733967] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 18.733968] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 18.733970] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 18.733971] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 20.253601] IPv6: wlan0: IPv6 duplicate address fe80::6a17:29ff:fee6:33bd detected!
[ 35.909509] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 52.452003] bbswitch: enabling discrete graphics
[ 52.599401] pci 0000:01:00.0: power state changed by ACPI to D0
[ 52.743881] nvidia: module license 'NVIDIA' taints kernel.
[ 52.743884] Disabling lock debugging due to kernel taint
[ 52.749795] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
[ 52.749799] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.20 Wed Oct 30 17:43:35 PDT 2013
[ 53.901950] vgaarb: this pci device is not a vga device
[ 53.912944] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
[ 53.919303] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 53.919376] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 53.919420] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 53.919470] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 53.919511] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 53.919552] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 53.919607] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 53.919648] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 58.136804] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 58.546286] vgaarb: this pci device is not a vga device
[ 59.499458] [drm] Module unloaded
[ 59.501289] bbswitch: disabling discrete graphics
[ 59.501302] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 59.514908] pci_raw_set_power_state: 180 callbacks suppressed
[ 59.514912] pci 0000:01:00.0: Refused to change power state, currently in D0
[ 59.518458] pci 0000:01:00.0: power state changed by ACPI to D3cold
[ 62.887360] bbswitch: enabling discrete graphics
[ 63.027712] pci 0000:01:00.0: power state changed by ACPI to D0
[ 63.039640] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
[ 63.039646] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.20 Wed Oct 30 17:43:35 PDT 2013
[ 63.141518] vgaarb: this pci device is not a vga device
[ 63.142009] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
[ 63.148392] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 63.148461] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 63.148502] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 63.148549] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 63.148587] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 63.148626] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 63.148677] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 63.148715] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 68.304857] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 68.681874] vgaarb: this pci device is not a vga device
[ 92.210594] [drm] Module unloaded
[ 92.212073] bbswitch: disabling discrete graphics
[ 92.212086] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 92.224855] pci 0000:01:00.0: Refused to change power state, currently in D0
[ 92.229249] pci 0000:01:00.0: power state changed by ACPI to D3cold
[ 199.522873] bbswitch: enabling discrete graphics
[ 199.672164] pci 0000:01:00.0: power state changed by ACPI to D0
[ 199.693523] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
[ 199.693530] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.20 Wed Oct 30 17:43:35 PDT 2013
[ 199.758953] vgaarb: this pci device is not a vga device
[ 199.759476] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
[ 199.765957] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 199.766028] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 199.766073] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 199.766124] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 199.766165] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 199.766206] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 199.766262] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 199.766302] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 200.914604] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 201.374762] vgaarb: this pci device is not a vga device
[ 208.385015] [drm] Module unloaded
[ 208.387376] bbswitch: disabling discrete graphics
[ 208.387396] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 208.403722] pci 0000:01:00.0: Refused to change power state, currently in D0
[ 208.409225] pci 0000:01:00.0: power state changed by ACPI to D3cold
[ 216.046386] bbswitch: enabling discrete graphics
[ 216.193129] pci 0000:01:00.0: power state changed by ACPI to D0
[ 216.209737] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
[ 216.209745] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.20 Wed Oct 30 17:43:35 PDT 2013
[ 216.276814] vgaarb: this pci device is not a vga device
[ 216.277280] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
[ 216.283760] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 216.283831] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 216.283876] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 216.283926] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 216.283967] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 216.284007] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 216.284091] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 216.284133] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 217.398244] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 217.863294] vgaarb: this pci device is not a vga device
[ 230.472488] [drm] Module unloaded
[ 230.474631] bbswitch: disabling discrete graphics
[ 230.474645] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 230.488995] pci 0000:01:00.0: Refused to change power state, currently in D0
[ 230.494698] pci 0000:01:00.0: power state changed by ACPI to D3cold
خروجی lsmod :
Module Size Used by
nls_iso8859_1 12713 1
bbswitch 13943 0
parport_pc 32701 0
ppdev 17671 0
rfcomm 69070 12
bnep 19564 2
snd_hda_codec_hdmi 41117 1
snd_hda_codec_realtek 55704 1
joydev 17377 0
hid_generic 12548 0
usbhid 53014 0
hid 105818 2 hid_generic,usbhid
uvcvideo 80885 0
videobuf2_vmalloc 13216 1 uvcvideo
videobuf2_memops 13362 1 videobuf2_vmalloc
videobuf2_core 40469 1 uvcvideo
videodev 133390 2 uvcvideo,videobuf2_core
usb_storage 62062 1
arc4 12608 2
iwldvm 237440 0
mac80211 596969 1 iwldvm
x86_pkg_temp_thermal 14162 0
intel_powerclamp 14705 0
coretemp 13435 0
kvm 431315 0
crct10dif_pclmul 14289 0
crc32_pclmul 13113 0
ghash_clmulni_intel 13259 0
aesni_intel 55624 2
aes_x86_64 17131 1 aesni_intel
lrw 13257 1 aesni_intel
gf128mul 14951 1 lrw
glue_helper 13990 1 aesni_intel
ablk_helper 13597 1 aesni_intel
cryptd 20329 3 ghash_clmulni_intel,aesni_intel,ablk_helper
snd_hda_intel 48171 0
snd_hda_codec 188738 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 13602 1 snd_hda_codec
snd_pcm 102033 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 18710 2 snd_pcm,snd_hda_intel
snd_seq_midi 13324 0
snd_seq_midi_event 14899 1 snd_seq_midi
snd_rawmidi 30095 1 snd_seq_midi
snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 29433 2 snd_pcm,snd_seq
lp 17759 0
snd 69141 11 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
parport 42299 3 lp,ppdev,parport_pc
iwlwifi 165398 1 iwldvm
btusb 28267 0
microcode 23518 0
bluetooth 371880 22 bnep,btusb,rfcomm
i915 655752 3
cfg80211 479757 3 iwlwifi,mac80211,iwldvm
psmouse 97626 0
serio_raw 13413 0
drm_kms_helper 52651 1 i915
mei_me 18421 0
drm 296739 4 i915,drm_kms_helper
lpc_ich 21080 0
soundcore 12680 1 snd
mei 77692 1 mei_me
i2c_algo_bit 13413 1 i915
ideapad_laptop 18342 0
sparse_keymap 13948 1 ideapad_laptop
video 19318 1 i915
mac_hid 13205 0
r8169 67341 0
ahci 25819 2
libahci 31898 1 ahci
mii 13934 1 r8169
یعنی تا زمانیکه درایور با پشتیبانی رسمی از optimus نده nvidia هیچ کدوم از این تنظیمات رنگ و ... رو نمیشه انجام داد؟؟؟