انجمن‌های فارسی اوبونتو

لطفاً به انجمن‌ها وارد شده و یا جهت ورود ثبت‌نام نمائید

لطفاً جهت ورود نام کاربری و رمز عبورتان را وارد نمائید


توزیع گنو/لینوکس اوبونتو ۲۰ ساله شد 🎉

نویسنده موضوع: flag فلش مموری (حل شد)  (دفعات بازدید: 1016 بار)

0 کاربر و 1 مهمان درحال مشاهده موضوع.

آفلاین aa2

  • Full Member
  • *
  • ارسال: 133
flag فلش مموری (حل شد)
« : 27 آذر 1394، 11:43 ب‌ظ »
سلام flag فلش مموری تو حالت عادی طوری که هم تو ویندوز کار کنه و هم تو اوبونتو باید چی باشه(تو قسمت gparted flag کدوما تیک بخورن)
« آخرین ویرایش: 14 بهمن 1394، 06:48 ب‌ظ توسط aa »

آفلاین بابک طور

  • Hero Member
  • *
  • ارسال: 800
  • جنسیت : پسر
پاسخ : flag فلش مموری
« پاسخ #1 : 28 آذر 1394، 08:38 ق‌ظ »
سلام.
این بخشی از راهنمای خود نرم‌افزار Gparted هست:

A description of flags in an msdos partition table follows:

Boot is used by some commercial operating system boot loaders. The boot flag indicates the partition is active or bootable. Only one partition on a disk device can be active.

Diag is used to indicate the partition is used for diagnostics / recovery.

Hidden is used by some commercial operating systems. The hidden flag makes the partition invisible to the operating system.

LBA is used by some commercial operating system boot loaders. The LBA flag indicates the partition should be accessed using Logical Block Addressing (LBA), instead of Cylinder-Head-Sector (CHS) addressing.

LVM is used to indicate the partition is used by a Logical Volume Manager (LVM).

Palo is used by the Precision Architecture - Reduced Instruction Set Computing (PA-RISC) boot loader, palo.

Prep is used to indicate the boot partition on Power Performance Computing (PowerPC) hardware.

RAID is used to indicate the partition is used in a Redundant Array of Inexpensive Disks (RAID).

A description of flags in a gpt partition table follows:

Atvrecv is used to indicate an Apple TV Recovery partition.

BIOS_GRUB indicates a BIOS boot partition often used by the GRUB 2 boot loader.

Boot is used by some commercial operating system boot loaders. The boot flag indicates the partition is active or bootable. Only one partition on a disk device can be active.

Diag indicates the partition is used for diagnostics or recovery.

Hidden is used by some commercial operating systems. The hidden flag makes the partition invisible to the operating system.

HP-service is used to indicate a Hewlett Packard service partition.

Legacy_boot is used by some special purpose software to indicate the partition might be bootable.

LVM indicates the partition is used by a Logical Volume Manager (LVM).

Msftres is used to indicate a Microsoft Reserved partition.

RAID indicates the partition is used in a Redundant Array of Inexpensive Disks (RAID).

آفلاین aa2

  • Full Member
  • *
  • ارسال: 133
پاسخ : flag فلش مموری
« پاسخ #2 : 10 دی 1394، 08:13 ب‌ظ »
تو اصطلاحات لینوکسی وارد نیستم میشه یه نه نفر بگه کداما باید تیک بخوره یه جا زده بود هیچ کدوم درسته؟