سلام
یک سری خطا تو log کرنل هست که هر وقت sleep میکنم باز از sleep در میام این خطا ها تو sudo dmesg نوشته رنگشون هم قرمزه که مشخصه خطا هستن .
در موردش جست و جو کردم ولی چیزی متوجه نشدم ولی به ACPI و دو تا هاردی که به SATA وصل هستند مربوط میشه. همینو فهمیدم
چیزی مهمی هست ؟
بخش از sudo dmesg که مربوط به زمان sleep و از sleep در آمدن هست:
[ 5312.435957] r8169 0000:03:00.0 enp3s0: Link is Down
[ 5312.513418] PM: suspend entry (deep)
[ 5312.620696] Filesystems sync: 0.107 seconds
[ 5312.620846] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 5312.622499] OOM killer disabled.
[ 5312.622500] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 5312.623696] printk: Suspending console(s) (use no_console_suspend to debug)
[ 5312.638885] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 5312.638891] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 5312.638992] sd 0:0:0:0: [sda] Stopping disk
[ 5312.639317] sd 1:0:0:0: [sdb] Stopping disk
[ 5313.391064] ACPI: Preparing to enter system sleep state S3
[ 5313.391462] PM: Saving platform NVS memory
[ 5313.391475] Disabling non-boot CPUs ...
[ 5313.391769] IRQ 16: no longer affine to CPU1
[ 5313.391774] IRQ 19: no longer affine to CPU1
[ 5313.392789] smpboot: CPU 1 is now offline
[ 5313.393953] ACPI: Low-level resume complete
[ 5313.393996] PM: Restoring platform NVS memory
[ 5313.395132] Enabling non-boot CPUs ...
[ 5313.395175] x86: Booting SMP configuration:
[ 5313.395176] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 5313.398283] CPU1 is up
[ 5313.398892] ACPI: Waking up from system sleep state S3
[ 5313.442032] usb usb3: root hub lost power or was reset
[ 5313.442036] usb usb4: root hub lost power or was reset
[ 5313.442493] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.CHN0.DRV0._GTF.DSSP], AE_NOT_FOUND (20201113/psargs-330)
[ 5313.442502] No Local Variables are initialized for Method [_GTF]
[ 5313.442504] No Arguments are initialized for method [_GTF]
[ 5313.442506] ACPI Error: Aborting method \_SB.PCI0.SAT0.CHN0.DRV0._GTF due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
[ 5313.442587] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.CHN1.DRV0._GTF.DSSP], AE_NOT_FOUND (20201113/psargs-330)
[ 5313.442594] No Local Variables are initialized for Method [_GTF]
[ 5313.442595] No Arguments are initialized for method [_GTF]
[ 5313.442598] ACPI Error: Aborting method \_SB.PCI0.SAT0.CHN1.DRV0._GTF due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
[ 5313.442680] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT1.CHN0.DRV0._GTF.DSSP], AE_NOT_FOUND (20201113/psargs-330)
[ 5313.442687] No Local Variables are initialized for Method [_GTF]
[ 5313.442688] No Arguments are initialized for method [_GTF]
[ 5313.442690] ACPI Error: Aborting method \_SB.PCI0.SAT1.CHN0.DRV0._GTF due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
[ 5313.442929] sd 1:0:0:0: [sdb] Starting disk
[ 5313.442942] sd 0:0:0:0: [sda] Starting disk
[ 5313.675995] OOM killer enabled.
[ 5313.675997] Restarting tasks ... done.
[ 5313.690397] video LNXVIDEO:00: Restoring backlight state
[ 5313.690405] PM: suspend exit
[ 5313.915765] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 5313.918191] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT1.CHN0.DRV0._GTF.DSSP], AE_NOT_FOUND (20201113/psargs-330)
[ 5313.918214] No Local Variables are initialized for Method [_GTF]
[ 5313.918217] No Arguments are initialized for method [_GTF]
[ 5313.918221] ACPI Error: Aborting method \_SB.PCI0.SAT1.CHN0.DRV0._GTF due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
[ 5313.922776] ata3.00: configured for UDMA/100
[ 5314.483714] ata4: failed to resume link (SControl 30)
[ 5314.494623] ata4: SATA link down (SStatus 4 SControl 30)
[ 5314.795716] ata2.01: failed to resume link (SControl 0)
[ 5314.795794] ata1.01: failed to resume link (SControl 0)
[ 5314.955772] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[ 5314.955791] ata1.01: SATA link down (SStatus 0 SControl 0)
[ 5314.975995] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.CHN0.DRV0._GTF.DSSP], AE_NOT_FOUND (20201113/psargs-330)
[ 5314.976017] No Local Variables are initialized for Method [_GTF]
[ 5314.976020] No Arguments are initialized for method [_GTF]
[ 5314.976024] ACPI Error: Aborting method \_SB.PCI0.SAT0.CHN0.DRV0._GTF due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
[ 5315.037061] ata1.00: configured for UDMA/133
[ 5315.217214] RTL8211E Gigabit Ethernet r8169-300:00: attached PHY driver (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 5315.423687] r8169 0000:03:00.0 enp3s0: Link is Down
[ 5315.991756] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[ 5315.991777] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 5316.012026] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.CHN1.DRV0._GTF.DSSP], AE_NOT_FOUND (20201113/psargs-330)
[ 5316.012048] No Local Variables are initialized for Method [_GTF]
[ 5316.012052] No Arguments are initialized for method [_GTF]
[ 5316.012056] ACPI Error: Aborting method \_SB.PCI0.SAT0.CHN1.DRV0._GTF due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
[ 5316.014624] ata2.00: configured for UDMA/133
[ 5317.019817] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 5317.019840] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 5727.871327] audit: type=1400 audit(1625734638.368:157): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/home/ali/.config/fontconfig/fonts.conf" pid=8850 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 7314.328480] audit: type=1400 audit(1625736224.822:158): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=29704 comm="apparmor_parser"
[ 7314.374351] audit: type=1400 audit(1625736224.866:159): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libreoffice-senddoc" pid=29707 comm="apparmor_parser"
[ 7321.426431] audit: type=1400 audit(1625736231.922:160): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libreoffice-soffice" pid=29710 comm="apparmor_parser"
[ 7321.444496] audit: type=1400 audit(1625736231.938:161): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libreoffice-soffice//gpg" pid=29710 comm="apparmor_parser"
[ 7321.488193] audit: type=1400 audit(1625736231.982:162): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libreoffice-xpdfimport" pid=29714 comm="apparmor_parser"
[ 7326.262901] perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 8232.101040] audit: type=1400 audit(1625737142.683:163): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/home/ali/.config/fontconfig/fonts.conf" pid=32895 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 8917.661228] audit: type=1400 audit(1625737828.239:164): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/ali/.config/fontconfig/fonts.conf" pid=34436 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 8917.742458] audit: type=1400 audit(1625737828.323:165): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/ali/.icons/Papirus/index.theme" pid=34436 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 8920.366313] audit: type=1400 audit(1625737830.947:166): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/ali/.thunderbird/profiles.ini" pid=34436 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 8920.378479] audit: type=1400 audit(1625737830.959:167): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/ali/.thunderbird/tg4wc0lh.default-release/cert9.db" pid=34436 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
[ 8920.381949] audit: type=1400 audit(1625737830.963:168): apparmor="ALLOWED" operation="file_lock" profile="libreoffice-soffice" name="/home/ali/.thunderbird/tg4wc0lh.default-release/cert9.db" pid=34436 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=1000 ouid=1000
[ 8920.384426] audit: type=1400 audit(1625737830.963:169): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/ali/.thunderbird/tg4wc0lh.default-release/key4.db" pid=34436 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
[ 8920.385092] audit: type=1400 audit(1625737830.963:170): apparmor="ALLOWED" operation="file_lock" profile="libreoffice-soffice" name="/home/ali/.thunderbird/tg4wc0lh.default-release/key4.db" pid=34436 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=1000 ouid=1000
[10537.641210] perf: interrupt took too long (3135 > 3132), lowering kernel.perf_event_max_sample_rate to 63750
تو عکس هم با ابزار گرافیگی logs نگاه کردم الآن مثلا دوبار من sleep کرده بودم دو دسته از این ارور ها هست.
یه خطای دیگه هم هست مال usb اونم قبلا نبود بیقه اش هم معمولا همیشه هستن
موضوع: خطای ACPI و SATA در زمان sleep کردن (دفعات بازدید: 558 بار)
