کار نکردن bumblebee بعد از نصب

[v.taghavi68]

عخشم من الان روی اوبونتو ۱۳.۱۰ همونطور که گفتی اول sudo add-apt-repository ppa:xorg-edgers/ppa رو اضافه کردم بعد sudo apt-get update و بعدش عین روش سایت آزادراه رو رفتم اما الان که می بینم باز داره همون درایور nvidia-304 رو نصب می کنه (گفتی که از nvidia-319 به بعد چیپ 740M رو پشتیبانی می کنه..!!!) الان با این اوصاف بذارم نصب شه یا نه ؟ از وقتی هم که ۱۳.۱۰ رو ریختم آپدیت هایی که software updater میده رو نصب نکردم!!! چطوری nvidia-331 or nvidia-319 رو نصب کنم.راستی توی عکس زیر نگاه کن درایور Nouveu از اول خودش نصب بوده.

[v.taghavi68]

الان طبق روشی که بالا گفتم نصب شد ولی بعد از بالا آمدن و login  کردن صفحه سیاه میشه ..!!!
حالا باید چیکار کنم؟؟؟؟

[v.taghavi68]

دوستان خواهشا کمک کنید من الان با دستورات زیر bumblebee رو بهمراه nvidia-331 به مخازن اضافه کردم :
sudo add-apt-repository ppa:bumblebee/stable
sudo add-apt-repository ppa:xorg-edgers/ppa
sudo apt-get update && sudo apt-get upgrade
و بعدش درایور nvidia-current و nvidia-304 رو که قبلا نصب کرده بودم پاک کردم :
sudo apt-get remove bumblebee-nvidia nvidia-current nvidia-settings
sudo apt-get purge nvidia-304 nvidia-settings-304
و در آخر هم با دستور زیر bumblebee و nvidia-331 رو نصب کردم :
sudo apt-get install bumblebee bumblebee-nvidia primus nvidia-331 nvidia-settings-331
sudo apt-get install primus-libs-ia32:i386
و حالا که دستور optirun firefox میزنم firefox باز میشه و در ترمینال هم این رو می نویسه :
(process:3497): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
vahid@Z500-Ubuntu13:~$
این یعنی اینکه الان به درستی نصب شده و کار می کنه ؟؟؟
و این عکس  خروجی دستور optirun -b primus glxgears :

اما زمانیکه دستور optirun -b primus nvidia-settings رو میرنم تا تنظیمات کارت گرافیکم رو تغییر بدم این رو میده که در تصویر زیر می بینید :

الان برای تنظیمات کارتم چی کار باید بکنم؟؟؟؟

[mojtabazn]

تو ویکی همچین چیزی نوشته که بعد اپدیت بایستی  این کارو انجام بدین مثال برای 319

کد: [انتخاب]

Example update to nvidia-319 driver

E.g. to update to the latest update of 319.x driver, you need to install it through apt.

sudo apt-get install nvidia-319-updates nvidia-settings-319-updates

Then you need to edit /etc/bumblebee/bumblebee.conf and set:

KernelDriver=nvidia_319_updates

LibraryPath=/usr/lib/nvidia-319-updates:/usr/lib32/nvidia-319-updates

XorgModulePath=/usr/lib/nvidia-319-updates/xorg,/usr/lib/xorg/modules

By running optirun nvidia-settings (or optirun -b none nvidia-settings -c :8) you can assert you are using the installed kernel module and driver.


[v.taghavi68]

خیلی جالبه وقتی تنظیمات bumblebee.conf روی nvidia-current که روی سیستمم نصب نیستش هست کار می کنه :

کد: [انتخاب]

# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
اما وقتی طبق اون جیزی که تو سایت گفته می برمش روی nvidia-331 که روی سیستمم نصب هستش کار نمی کنه :

کد: [انتخاب]

# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-331
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-331:/usr/lib32/nvidia-331
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-331/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
اینم خروجی دستور روی حالتی که فابل bumblebee.conf روی حالت nvidia-current نصبه :

کد: [انتخاب]

[ 1117.549582] [DEBUG]Found card: 01:00.0 (discrete)
[ 1117.549611] [DEBUG]Found card: 00:02.0 (integrated)
[ 1117.549619] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 1117.550038] [DEBUG]Skipping auto-detection, using configured driver 'nvidia'
[ 1117.550191] [DEBUG]Process /sbin/modprobe started, PID 2765.
[ 1117.550246] [DEBUG]Hiding stderr for execution of /sbin/modprobe
[ 1117.552511] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 1117.552634] [DEBUG]bbswitch has been detected.
[ 1117.552687] [INFO]Switching method 'bbswitch' is available and will be used.
[ 1117.552719] [DEBUG]Active configuration:
[ 1117.552740] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 1117.552767] [DEBUG] X display: :8
[ 1117.552793] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-current:/usr/lib32/nvidia-current
[ 1117.552825] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 1117.552861] [DEBUG] pidfile: /var/run/bumblebeed.pid
[ 1117.552904] [DEBUG] xorg.conf file: /etc/bumblebee/xorg.conf.nvidia
[ 1117.552936] [DEBUG] xorg.conf.d dir: /etc/bumblebee/xorg.conf.d
[ 1117.552963] [DEBUG] ModulePath: /usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules
[ 1117.553007] [DEBUG] GID name: bumblebee
[ 1117.553045] [DEBUG] Power method: auto
[ 1117.553074] [DEBUG] Stop X on exit: 1
[ 1117.553097] [DEBUG] Driver: nvidia
[ 1117.553121] [DEBUG] Driver module: nvidia-current
[ 1117.553152] [DEBUG] Card shutdown state: 1
[ 1117.553313] [DEBUG]Process /sbin/modprobe started, PID 2766.
[ 1117.553364] [DEBUG]Hiding stderr for execution of /sbin/modprobe
[ 1117.555507] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 1117.555566] [ERROR]Module 'nvidia-current' is not found.اما در حالت دوم که روی nvidia-331 نصبه این ماٰٰژول رو میشناسه اما کار نمی کنه..!!!
اینم خروجی دستور ls /usr/lib/ | grep -i nvidia که نشون میده درایور نصبیم رو :

کد: [انتخاب]

nvidia
nvidia-331
nvidia-settings-331در ضمن من الان وقتی توی تنظیمات کارتم میرم با optirun -b none nvidia-settings -c :8 دیگه مثل قبل جایی برای تنظیم رزولوشن تصویر و تنظیم رنگ بندی وجود نداره..!!! برای تنظیم رنگ ها چه کار می تونم بکنم ؟؟؟

[ساسان]

از اول و قدم به قدم شروع می‌کنیم:
یک - اطمینان از نصب هدرهای کرنل:

کد: [انتخاب]

sudo apt-get install linux-headers-$(uname -r)دو - ساخت ماژول nvidia-331 بر اساس هدرهای کرنل:

کد: [انتخاب]

sudo dpkg-reconfigure nvidia-331سه - از این bumblebee کانف استفاده کن:

کد: [انتخاب]

# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-331
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-331:/usr/lib32/nvidia-331
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-331/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveauو سرویس رو ریست کن.
اگر همچنان جواب نداد خروجی‌ها زیر رو برام بزار:

کد: [انتخاب]

dmesg
lsmod
sudo /usr/sbin/bumblebeed -vv --driver nvidia

و حالا که دستور optirun firefox میزنم firefox باز میشه و در ترمینال هم این رو می نویسه :
(process:3497): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
vahid@Z500-Ubuntu13:~$
این یعنی اینکه الان به درستی نصب شده و کار می کنه ؟؟؟

خطایی که گذاشتی به نظر باگ فایرفاکس میاد + درحالت معمولی اجرا میشد؟
glxgears ـی که گذاشته داره کار می‌کنه ولی فکرکنم روی nouveau باشه تا nvidia.

اما زمانیکه دستور optirun -b primus nvidia-settings رو میرنم تا تنظیمات کارت گرافیکم رو تغییر بدم این رو میده که در تصویر زیر می بینید :

درایور nvidia از optimus پشتیبانی نمیکنه، تو نمی‌تونی تنظیماتش رو با bumblbee اجرا کنی و انتظار داشته باشی کار کنه. تا پشتیبانی رسمی صبر کن.

[v.taghavi68]

با همین تنظیم bumblebee که دادی :

کد: [انتخاب]

# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-331
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-331:/usr/lib32/nvidia-331
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-331/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveauالان اجرا میشن اما خروجی دستور sudo /usr/sbin/bumblebeed -vv --driver nvidia هنوز nvidia-current  رو زده ...!!

کد: [انتخاب]

[  599.698569] [DEBUG]Found card: 01:00.0 (discrete)
[  599.698632] [DEBUG]Found card: 00:02.0 (integrated)
[  599.698654] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[  599.699092] [DEBUG]Skipping auto-detection, using configured driver 'nvidia'
[  599.699268] [DEBUG]Process /sbin/modprobe started, PID 8237.
[  599.699335] [DEBUG]Hiding stderr for execution of /sbin/modprobe
[  599.700473] [DEBUG]SIGCHILD received, but wait failed with No child processes
[  599.700594] [DEBUG]bbswitch has been detected.
[  599.700659] [INFO]Switching method 'bbswitch' is available and will be used.
[  599.700690] [DEBUG]Active configuration:
[  599.700712] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[  599.700736] [DEBUG] X display: :8
[  599.700759] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-current:/usr/lib32/nvidia-current
[  599.700782] [DEBUG] Socket path: /var/run/bumblebee.socket
[  599.700809] [DEBUG] pidfile: /var/run/bumblebeed.pid
[  599.700830] [DEBUG] xorg.conf file: /etc/bumblebee/xorg.conf.nvidia
[  599.700857] [DEBUG] xorg.conf.d dir: /etc/bumblebee/xorg.conf.d
[  599.700879] [DEBUG] ModulePath: /usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules
[  599.700906] [DEBUG] GID name: bumblebee
[  599.700928] [DEBUG] Power method: auto
[  599.700955] [DEBUG] Stop X on exit: 1
[  599.700977] [DEBUG] Driver: nvidia
[  599.701004] [DEBUG] Driver module: nvidia-current
[  599.701026] [DEBUG] Card shutdown state: 1
[  599.701175] [DEBUG]Process /sbin/modprobe started, PID 8238.
[  599.701232] [DEBUG]Hiding stderr for execution of /sbin/modprobe
[  599.702213] [DEBUG]SIGCHILD received, but wait failed with No child processes
[  599.702291] [ERROR]Module 'nvidia-current' is not found.خروجی dmesg :

کد: [انتخاب]

[    4.150035] cpuidle: using governor ladder
[    4.150235] cpuidle: using governor menu
[    4.150244] ledtrig-cpu: registered to indicate activity on CPUs
[    4.150325] TCP: cubic registered
[    4.150410] NET: Registered protocol family 10
[    4.150577] NET: Registered protocol family 17
[    4.150585] Key type dns_resolver registered
[    4.150846] PM: Hibernation image not present or could not be loaded.
[    4.150850] Loading module verification certificates
[    4.151789] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 0d2f067ae81edbe7efb6ee2c61c63d9bdcf0659d'
[    4.151798] registered taskstats version 1
[    4.153946] Key type trusted registered
[    4.156153] Key type encrypted registered
[    4.158517] AppArmor: AppArmor sha1 policy hashing enabled
[    4.158998]   Magic number: 5:909:582
[    4.159020] pci_bus 0000:03: hash matches
[    4.159111] rtc_cmos 00:05: setting system clock to 2013-11-21 12:34:24 UTC (1385037264)
[    4.160489] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.160491] EDD information not available.
[    4.161272] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[    4.161273] Write protecting the kernel read-only data: 12288k
[    4.163137] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    4.163245] Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
[    4.164975] Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
[    4.173731] systemd-udevd[144]: starting version 204
[    4.187685] mii: module verification failed: signature and/or required key missing - tainting kernel
[    4.188594] ahci 0000:00:1f.2: version 3.0
[    4.188747] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    4.190149] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.190159] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    4.190360] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[    4.190545] r8169 0000:02:00.0 eth0: RTL8105e at 0xffffc90000c6a000, 20:1a:06:23:15:0e, XID 00c00000 IRQ 43
[    4.202468] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x6 impl SATA mode
[    4.202474] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[    4.202481] ahci 0000:00:1f.2: setting latency timer to 64
[    4.210803] scsi0 : ahci
[    4.210871] scsi1 : ahci
[    4.210924] scsi2 : ahci
[    4.210976] scsi3 : ahci
[    4.211030] scsi4 : ahci
[    4.211080] scsi5 : ahci
[    4.211105] ata1: DUMMY
[    4.211108] ata2: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617180 irq 42
[    4.211110] ata3: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617200 irq 42
[    4.211111] ata4: DUMMY
[    4.211112] ata5: DUMMY
[    4.211112] ata6: DUMMY
[    4.418570] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    4.530676] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.530695] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.535406] ata3.00: ATAPI: PLDS    DVD-RW DU8A5SH, NL61, max UDMA/100
[    4.536756] ata3.00: configured for UDMA/100
[    4.537053] ata2.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR20002, max UDMA/100
[    4.537056] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    4.543434] ata2.00: configured for UDMA/100
[    4.543699] scsi 1:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 2AR2 PQ: 0 ANSI: 5
[    4.543836] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    4.543838] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    4.543840] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    4.543885] sd 1:0:0:0: [sda] Write Protect is off
[    4.543888] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.543900] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.548359] scsi 2:0:0:0: CD-ROM            PLDS     DVD-RW DU8A5SH   NL61 PQ: 0 ANSI: 5
[    4.550991] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    4.550997] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.551156] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.551160] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.551301] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    4.551373] hub 1-1:1.0: USB hub found
[    4.551374] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    4.551453] hub 1-1:1.0: 6 ports detected
[    4.595872]  sda: sda1 sda2 sda3 < sda5 > sda4
[    4.596718] sd 1:0:0:0: [sda] Attached SCSI disk
[    4.662725] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    4.795127] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    4.795133] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.795497] hub 2-1:1.0: USB hub found
[    4.795598] hub 2-1:1.0: 6 ports detected
[    4.962877] usb 3-4: new high-speed USB device number 2 using xhci_hcd
[    4.982902] tsc: Refined TSC clocksource calibration: 2095.239 MHz
[    5.062060] usb 3-4: New USB device found, idVendor=174f, idProduct=146d
[    5.062066] usb 3-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    5.062070] usb 3-4: Product: Lenovo EasyCamera
[    5.062073] usb 3-4: Manufacturer: Generic
[    5.062076] usb 3-4: SerialNumber: 200901010001
[    5.118322] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    5.139035] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    5.233498] usb 1-1.1: New USB device found, idVendor=8564, idProduct=1000
[    5.233504] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.233508] usb 1-1.1: Product: Mass Storage Device
[    5.233511] usb 1-1.1: Manufacturer: JetFlash
[    5.233513] usb 1-1.1: SerialNumber: 18B4472SU7F9JXI5
[    5.303113] usb 1-1.2: new low-speed USB device number 4 using ehci-pci
[    5.399717] usb 1-1.2: New USB device found, idVendor=1d57, idProduct=0008
[    5.399723] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    5.399726] usb 1-1.2: Product: 2.4G Wireless Optical Mouse
[    5.471380] usb 1-1.3: new full-speed USB device number 5 using ehci-pci
[    5.567901] usb 1-1.3: New USB device found, idVendor=8087, idProduct=07da
[    5.567907] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.983626] Switched to clocksource tsc
[   12.097670] Adding 3905532k swap on /dev/sda5.  Priority:-1 extents:1 across:3905532k FS
[   12.271495] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.335071] systemd-udevd[335]: starting version 204
[   12.472807] input: Ideapad extra buttons as /devices/platform/ideapad/input/input4
[   12.478712] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[   12.478718] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.478723] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[   12.478727] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251)
[   12.478729] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.478730] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[   12.478732] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251)
[   12.478735] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.478736] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.479108] mei_me 0000:00:16.0: setting latency timer to 64
[   12.479158] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[   12.479891] [drm] Initialized drm 1.1.0 20060810
[   12.492097] cfg80211: Calling CRDA to update world regulatory domain
[   12.495719] [drm] Memory usable by graphics device = 2048M
[   12.495728] i915 0000:00:02.0: setting latency timer to 64
[   12.497778] Bluetooth: Core ver 2.16
[   12.497790] NET: Registered protocol family 31
[   12.497791] Bluetooth: HCI device and connection manager initialized
[   12.497797] Bluetooth: HCI socket layer initialized
[   12.497798] Bluetooth: L2CAP socket layer initialized
[   12.497802] Bluetooth: SCO socket layer initialized
[   12.498780] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[   12.499176] usbcore: registered new interface driver btusb
[   12.502448] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   12.502450] Copyright(c) 2003-2013 Intel Corporation
[   12.502544] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[   12.502666] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
[   12.512938] lp: driver loaded but no devices found
[   12.527821] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[   12.527829] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   12.527830] [drm] Driver supports precise vblank timestamp query.
[   12.527845] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
[   12.527874] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
[   12.527919] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   12.572816] fbcon: inteldrmfb (fb0) is primary device
[   12.603718] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[   12.604099] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[   12.604455] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[   12.604870] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
[   12.605262] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
[   12.605579] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
[   12.606176] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
[   12.606411] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   12.612467] kvm: disabled by bios
[   12.627159] type=1400 audit(1385024672.962:2): apparmor="STATUS" operation="profile_load" parent=374 profile="unconfined" name="/sbin/dhclient" pid=442 comm="apparmor_parser"
[   12.627163] type=1400 audit(1385024672.962:3): apparmor="STATUS" operation="profile_load" parent=374 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=442 comm="apparmor_parser"
[   12.627165] type=1400 audit(1385024672.962:4): apparmor="STATUS" operation="profile_load" parent=374 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=442 comm="apparmor_parser"
[   12.627172] type=1400 audit(1385024672.962:5): apparmor="STATUS" operation="profile_replace" parent=420 profile="unconfined" name="/sbin/dhclient" pid=441 comm="apparmor_parser"
[   12.627177] type=1400 audit(1385024672.962:6): apparmor="STATUS" operation="profile_replace" parent=420 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=441 comm="apparmor_parser"
[   12.627179] type=1400 audit(1385024672.962:7): apparmor="STATUS" operation="profile_replace" parent=420 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=441 comm="apparmor_parser"
[   12.627589] type=1400 audit(1385024672.962:8): apparmor="STATUS" operation="profile_replace" parent=374 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=442 comm="apparmor_parser"
[   12.627592] type=1400 audit(1385024672.962:9): apparmor="STATUS" operation="profile_replace" parent=374 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=442 comm="apparmor_parser"
[   12.627603] type=1400 audit(1385024672.962:10): apparmor="STATUS" operation="profile_replace" parent=420 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=441 comm="apparmor_parser"
[   12.627606] type=1400 audit(1385024672.962:11): apparmor="STATUS" operation="profile_replace" parent=420 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=441 comm="apparmor_parser"
[   12.633298] kvm: disabled by bios
[   12.651960] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   12.667127] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   12.667128] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   12.667128] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   12.667129] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
[   12.667130] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[   12.667226] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[   12.685923] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   12.730213] cfg80211: World regulatory domain updated:
[   12.730213] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.730214] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.730215] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.730215] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.730216] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.730216] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.868640] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[   12.868695] scsi6 : usb-storage 1-1.1:1.0
[   12.868779] usbcore: registered new interface driver usb-storage
[   12.870778] Linux video capture interface: v2.00
[   12.875368] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (174f:146d)
[   12.880776] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input5
[   12.880827] usbcore: registered new interface driver uvcvideo
[   12.880828] USB Video Class driver (1.1.1)
[   12.960469] hidraw: raw HID events driver (C) Jiri Kosina
[   13.019536] usbcore: registered new interface driver usbhid
[   13.019536] usbhid: USB HID core driver
[   13.057690] input: 2.4G Wireless Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input6
[   13.057982] hid-generic 0003:1D57:0008.0001: input,hidraw0: USB HID v1.10 Mouse [2.4G Wireless Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[   13.234217] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f01)
[   13.259326] psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x15, 0x0e.
[   13.355649] Console: switching to colour frame buffer device 170x48
[   13.357630] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   13.357631] i915 0000:00:02.0: registered panic notifier
[   13.357769] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   13.360179] acpi device:37: registered as cooling_device9
[   13.360290] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[   13.360325] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input7
[   13.368566] acpi device:43: registered as cooling_device10
[   13.368674] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   13.368703] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
[   13.368819] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   13.368955] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   13.379904] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
[   13.382335] SKU: Nid=0x1d sku_cfg=0x40148505
[   13.382337] SKU: port_connectivity=0x1
[   13.382338] SKU: enable_pcbeep=0x1
[   13.382339] SKU: check_sum=0x00000004
[   13.382340] SKU: customization=0x00000085
[   13.382340] SKU: external_amp=0x0
[   13.382341] SKU: platform_type=0x1
[   13.382342] SKU: swap=0x0
[   13.382343] SKU: override=0x1
[   13.382566] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   13.382567]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.382568]    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   13.382568]    mono: mono_out=0x0
[   13.382569]    inputs:
[   13.382571]      Mic=0x18
[   13.382572]      Internal Mic=0x12
[   13.382573] realtek: No valid SSID, checking pincfg 0x40148505 for NID 0x1d
[   13.382574] realtek: Enabling init ASM_ID=0x8505 CODEC_ID=10ec0269
[   13.390629] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   13.390688] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   13.390737] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   13.848196] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[   14.088206] scsi 6:0:0:0: Direct-Access     JetFlash Transcend 8GB    1100 PQ: 0 ANSI: 4
[   14.088584] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   14.089120] sd 6:0:0:0: [sdb] 15667200 512-byte logical blocks: (8.02 GB/7.47 GiB)
[   14.089871] sd 6:0:0:0: [sdb] Write Protect is off
[   14.089874] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[   14.090742] sd 6:0:0:0: [sdb] No Caching mode page found
[   14.090768] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   14.094119] sd 6:0:0:0: [sdb] No Caching mode page found
[   14.094141] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   14.095057]  sdb: sdb4
[   14.098426] sd 6:0:0:0: [sdb] No Caching mode page found
[   14.098449] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   14.098481] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   15.072950] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   15.333452] init: failsafe main process (703) killed by TERM signal
[   15.584099] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.584103] Bluetooth: BNEP filters: protocol multicast
[   15.584111] Bluetooth: BNEP socket layer initialized
[   15.587267] Bluetooth: RFCOMM TTY layer initialized
[   15.587278] Bluetooth: RFCOMM socket layer initialized
[   15.587280] Bluetooth: RFCOMM ver 1.11
[   15.992358] ppdev: user-space parallel port driver
[   16.047033] init: avahi-cups-reload main process (868) terminated with status 1
[   16.282577] init: nvidia-persistenced main process (997) terminated with status 1
[   17.324774] r8169 0000:02:00.0 eth0: link down
[   17.324807] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.325101] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.326695] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[   17.334436] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[   17.576684] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[   17.584401] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[   17.644758] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.645116] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.071590] bbswitch: version 0.7
[   18.071595] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   18.071598] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[   18.071607] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   18.071745] bbswitch: detected an Optimus _DSM function
[   18.071785] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[   18.073370] bbswitch: disabling discrete graphics
[   18.073377] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   18.097148] pci 0000:01:00.0: power state changed by ACPI to D3cold
[   18.704995] wlan0: authenticate with bc:ae:c5:a6:36:5c
[   18.713163] wlan0: send auth to bc:ae:c5:a6:36:5c (try 1/3)
[   18.715750] wlan0: authenticated
[   18.722544] wlan0: associate with bc:ae:c5:a6:36:5c (try 1/3)
[   18.727914] wlan0: RX AssocResp from bc:ae:c5:a6:36:5c (capab=0x411 status=0 aid=1)
[   18.731625] wlan0: associated
[   18.731667] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   18.731738] cfg80211: Calling CRDA for country: GB
[   18.733959] cfg80211: Regulatory domain changed to country: GB
[   18.733963] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.733965] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   18.733967] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   18.733968] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   18.733970] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   18.733971] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[   20.253601] IPv6: wlan0: IPv6 duplicate address fe80::6a17:29ff:fee6:33bd detected!
[   35.909509] FAT-fs (sdb4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   52.452003] bbswitch: enabling discrete graphics
[   52.599401] pci 0000:01:00.0: power state changed by ACPI to D0
[   52.743881] nvidia: module license 'NVIDIA' taints kernel.
[   52.743884] Disabling lock debugging due to kernel taint
[   52.749795] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
[   52.749799] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.20  Wed Oct 30 17:43:35 PDT 2013
[   53.901950] vgaarb: this pci device is not a vga device
[   53.912944] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
[   53.919303] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   53.919376] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   53.919420] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   53.919470] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   53.919511] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   53.919552] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   53.919607] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   53.919648] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   58.136804] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   58.546286] vgaarb: this pci device is not a vga device
[   59.499458] [drm] Module unloaded
[   59.501289] bbswitch: disabling discrete graphics
[   59.501302] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   59.514908] pci_raw_set_power_state: 180 callbacks suppressed
[   59.514912] pci 0000:01:00.0: Refused to change power state, currently in D0
[   59.518458] pci 0000:01:00.0: power state changed by ACPI to D3cold
[   62.887360] bbswitch: enabling discrete graphics
[   63.027712] pci 0000:01:00.0: power state changed by ACPI to D0
[   63.039640] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
[   63.039646] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.20  Wed Oct 30 17:43:35 PDT 2013
[   63.141518] vgaarb: this pci device is not a vga device
[   63.142009] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
[   63.148392] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   63.148461] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   63.148502] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   63.148549] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   63.148587] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   63.148626] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   63.148677] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   63.148715] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   68.304857] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   68.681874] vgaarb: this pci device is not a vga device
[   92.210594] [drm] Module unloaded
[   92.212073] bbswitch: disabling discrete graphics
[   92.212086] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[   92.224855] pci 0000:01:00.0: Refused to change power state, currently in D0
[   92.229249] pci 0000:01:00.0: power state changed by ACPI to D3cold
[  199.522873] bbswitch: enabling discrete graphics
[  199.672164] pci 0000:01:00.0: power state changed by ACPI to D0
[  199.693523] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
[  199.693530] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.20  Wed Oct 30 17:43:35 PDT 2013
[  199.758953] vgaarb: this pci device is not a vga device
[  199.759476] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
[  199.765957] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  199.766028] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  199.766073] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  199.766124] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  199.766165] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  199.766206] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  199.766262] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  199.766302] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  200.914604] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  201.374762] vgaarb: this pci device is not a vga device
[  208.385015] [drm] Module unloaded
[  208.387376] bbswitch: disabling discrete graphics
[  208.387396] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  208.403722] pci 0000:01:00.0: Refused to change power state, currently in D0
[  208.409225] pci 0000:01:00.0: power state changed by ACPI to D3cold
[  216.046386] bbswitch: enabling discrete graphics
[  216.193129] pci 0000:01:00.0: power state changed by ACPI to D0
[  216.209737] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
[  216.209745] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.20  Wed Oct 30 17:43:35 PDT 2013
[  216.276814] vgaarb: this pci device is not a vga device
[  216.277280] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
[  216.283760] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  216.283831] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  216.283876] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  216.283926] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  216.283967] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  216.284007] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  216.284091] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  216.284133] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  217.398244] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  217.863294] vgaarb: this pci device is not a vga device
[  230.472488] [drm] Module unloaded
[  230.474631] bbswitch: disabling discrete graphics
[  230.474645] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[  230.488995] pci 0000:01:00.0: Refused to change power state, currently in D0
[  230.494698] pci 0000:01:00.0: power state changed by ACPI to D3cold
خروجی lsmod :

کد: [انتخاب]

Module                  Size  Used by
nls_iso8859_1          12713  1
bbswitch               13943  0
parport_pc             32701  0
ppdev                  17671  0
rfcomm                 69070  12
bnep                   19564  2
snd_hda_codec_hdmi     41117  1
snd_hda_codec_realtek    55704  1
joydev                 17377  0
hid_generic            12548  0
usbhid                 53014  0
hid                   105818  2 hid_generic,usbhid
uvcvideo               80885  0
videobuf2_vmalloc      13216  1 uvcvideo
videobuf2_memops       13362  1 videobuf2_vmalloc
videobuf2_core         40469  1 uvcvideo
videodev              133390  2 uvcvideo,videobuf2_core
usb_storage            62062  1
arc4                   12608  2
iwldvm                237440  0
mac80211              596969  1 iwldvm
x86_pkg_temp_thermal    14162  0
intel_powerclamp       14705  0
coretemp               13435  0
kvm                   431315  0
crct10dif_pclmul       14289  0
crc32_pclmul           13113  0
ghash_clmulni_intel    13259  0
aesni_intel            55624  2
aes_x86_64             17131  1 aesni_intel
lrw                    13257  1 aesni_intel
gf128mul               14951  1 lrw
glue_helper            13990  1 aesni_intel
ablk_helper            13597  1 aesni_intel
cryptd                 20329  3 ghash_clmulni_intel,aesni_intel,ablk_helper
snd_hda_intel          48171  0
snd_hda_codec         188738  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
snd_pcm               102033  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
snd_seq_midi           13324  0
snd_seq_midi_event     14899  1 snd_seq_midi
snd_rawmidi            30095  1 snd_seq_midi
snd_seq                61560  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              29433  2 snd_pcm,snd_seq
lp                     17759  0
snd                    69141  11 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
parport                42299  3 lp,ppdev,parport_pc
iwlwifi               165398  1 iwldvm
btusb                  28267  0
microcode              23518  0
bluetooth             371880  22 bnep,btusb,rfcomm
i915                  655752  3
cfg80211              479757  3 iwlwifi,mac80211,iwldvm
psmouse                97626  0
serio_raw              13413  0
drm_kms_helper         52651  1 i915
mei_me                 18421  0
drm                   296739  4 i915,drm_kms_helper
lpc_ich                21080  0
soundcore              12680  1 snd
mei                    77692  1 mei_me
i2c_algo_bit           13413  1 i915
ideapad_laptop         18342  0
sparse_keymap          13948  1 ideapad_laptop
video                  19318  1 i915
mac_hid                13205  0
r8169                  67341  0
ahci                   25819  2
libahci                31898  1 ahci
mii                    13934  1 r8169یعنی تا زمانیکه درایور با پشتیبانی رسمی از optimus نده nvidia  هیچ کدوم از این تنظیمات رنگ و ... رو نمیشه انجام داد؟؟؟

[ساسان]

محتوی فایل زیر رو برام بزار:

کد: [انتخاب]

/etc/bumblebee/xorg.conf.nvidiaعجیبه که مستندات bumblebee اینقدر کمه. یک جا تو wikiشون نوشته که راهکاری برای شناسایی خودکار ماژول nvidia در اوبونتو دارن ولی هیچجا عملکردش رو توضیح ندادن.

خروجی dmesg

خروجی‌های طولانی مثل dmesg رو اول توی یه فایل بریز بعد محتویات فایل رو این‌جا قرار بده. اینجوری مثلا:

کد: [انتخاب]

dmesg > ~/dmesg.textالان خروجی optirun glxgears چیه؟ ببین می‌تونی nvidia-331 رو دستی لود کنی؟

کد: [انتخاب]

sudo modprobe nvidia-331

یعنی تا زمانیکه درایور با پشتیبانی رسمی از optimus نده nvidia  هیچ کدوم از این تنظیمات رنگ و ... رو نمیشه انجام داد؟؟

تنظیمات رنگ، روشنایی و غیره مربوط به درایور intel میشه که خروجی تصویر میده. چیپ nvidia فقط می‌تونه تو رندر کمک کنه.

[v.taghavi68]

باشه چشم.
خروجی /etc/bumblebee/xorg.conf.nvidia:

کد: [انتخاب]

Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:01:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSectionخروجی sudo modprobe nvidia-331 :

کد: [انتخاب]

ERROR: could not insert 'nvidia_331': No such deviceو موقعی که optirun glxgears رو اجرا  می کنم :

[ساسان]

و موقعی که optirun glxgears رو اجرا  می کنم

به نظرم میرسه داره کار می‌کنه. حداقل خطا که نداده.
خروجی دستورهای زیر چیه؟

کد: [انتخاب]

optirun glxinfo | grep -i opengl
lsmod | egrep 'nvidia|nouveau'

[v.taghavi68]

خروجی optirun glxinfo | grep -i opengl:

کد: [انتخاب]

OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GT 740M/PCIe/SSE2
OpenGL core profile version string: 4.3.0 NVIDIA 331.20
OpenGL core profile shading language version string: 4.30 NVIDIA via Cg compiler
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 4.4.0 NVIDIA 331.20
OpenGL shading language version string: 4.40 NVIDIA via Cg compiler
OpenGL context flags: (none)
OpenGL profile mask: (none)
OpenGL extensions:دستور lsmod | egrep 'nvidia|nouveau' هم که اصلا کاری نمی کنه و دوباره خط اعلان ظاهر میشه.
یعنی الان نصبه ؟ راستی ساسان جان از bumblebee configurator ui  استفاده کنم ببینم نتیجش چی میشه چون این تنظیمات رو بصورت گرافیکی داره.

[ساسان]

دستور lsmod | egrep 'nvidia|nouveau' هم که اصلا کاری نمی کنه و دوباره خط اعلان ظاهر میشه.
یعنی الان نصبه ؟ راستی ساسان جان از bumblebee configurator ui  استفاده کنم ببینم نتیجش چی میشه چون این تنظیمات رو بصورت گرافیکی داره.

بله نصبه و کار می‌کنه. اون ابزار کانفیگ‌هایی که خودمون دستی نوشتیم رو با گزینه‌های گرافیکی در اختیارت قرار میده.
می‌تونم بپرسم استفاده اصلیت از گرافیک nvidia چه خواهد بود؟ بازی؟ رندر سه بعدی؟
چون به نظرم برای درصد بالایی از کاربران لینوکس همین که گرافیک دوم خاموش بشه و عمرباتری بالاتری بگیرن کافیه چون گرافیک اینتل از پس تمام نیازهای گرافیکی متداول به خوبی برمیاد.

[v.taghavi68]

یکی اینکه بتونم مثل لپ تاپ قبلیم (dell-xps) تنظیمات رنگ و مدیدیریت خروجی های مانیتور و تلویزیون hd  رو با کابل HDMI  انجام بدم و یکی دیگه هم چون وب کار می کنم و علاقه زیادی به dreamweaver , photoshop دارم و نیازه تحته wine  اجراش کنم . الان این تنظیمات رنگ که گفتی رو روی intel graphic  چطور می تونم پیاده کنم؟

[v.taghavi68]

ساسان جان بالاخره تونستم کامل و بدون مشکل نصبش کنم.حالا ی آموزش کامل رو ساختم رو در فروم قرار دادم تا بقیه هم بتونن ازش استفاده کنن. ی سری بزنی ببینی کجاها گاف دادم و سوتی ازم بگیری بد نیست .بابت راهنمایی هات ممنون. اینم آدرس آموزشم :
http://forum.ubuntu.ir/index.php/topic,80692.msg674382.html#msg674382