خطا هنگام اپگربد

[esfahan2000]

با سلام به همه دوستان و اساتید
موقعی که اپگرید را انجام میدم این خطا را میده:

کد: [انتخاب]

root@Debian:~# aptitude upgrade
The following partially installed packages will be configured:
  man-db
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B of archives. After unpacking 0 B will be used.
debconf: Perl may be unconfigured (Can't locate strict.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at (eval 1) line 2.
BEGIN failed--compilation aborted at (eval 1) line 2.
) -- aborting
Setting up man-db (2.5.7-8) ...
Can't locate strict.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at /usr/share/debconf/frontend line 5.
BEGIN failed--compilation aborted at /usr/share/debconf/frontend line 5.
dpkg: error processing man-db (--configure):
 subprocess installed post-installation script returned error exit status 2
configured to not write apport reports
                                      Errors were encountered while processing:
 man-db
E: Sub-process /usr/bin/dpkg returned an error code (1)
A package failed to install.  Trying to recover:
Setting up man-db (2.5.7-8) ...
Can't locate strict.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at /usr/share/debconf/frontend line 5.
BEGIN failed--compilation aborted at /usr/share/debconf/frontend line 5.
dpkg: error processing man-db (--configure):
 subprocess installed post-installation script returned error exit status 2
Errors were encountered while processing:
 man-db


[doomhammer65ir]

کد: [انتخاب]

sudo dpkg-reconfigure man-db
sudo apt-get install -f
sudo apt-get update  && apt-get upgrade


[esfahan2000]

نشد این خطا را داد:

کد: [انتخاب]

root@Debian:~# dpkg-reconfigure man-db
Can't locate strict.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at /usr/sbin/dpkg-reconfigure line 8.
BEGIN failed--compilation aborted at /usr/sbin/dpkg-reconfigure line 8.


[AliRezaiMi]

درود
ببینید این کار میده :
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CLIBEBYwAA&url=http%3A%2F%2Fubuntuforums.org%2Farchive%2Findex.php%2Ft-1462788.html&ei=d27pT6T5NY_RsgawytHvDg&usg=AFQjCNHpsTCoI6tPeFuwJ-jlfuff9XKN-Q&sig2=WSZ9CF3g1yg0LaRe3eXO_g

اگر نه خروجی دستورات زیر رو بذارید ببینیم میشه چیزی فهمید :
apt-get update
apt-get dist-upgrade
اگر کار نداد باز ببینید میشه پکیج رو پاک کرد یا نه :
apt-get purge man-db

[سید مسعود امامیان]

esfahan2000 جان تو انجمن لینوکس هم مطرح کردن جواب نگرفتن

[esfahan2000]

esfahan2000 جان تو انجمن لینوکس هم مطرح کردن جواب نگرفتن

یه ۲۰ جا تا حالا مطرحش کردم اما جواب نگرفتم 

[AliRezaiMi]

esfahan2000 جان تو انجمن لینوکس هم مطرح کردن جواب نگرفتن

یه ۲۰ جا تا حالا مطرحش کردم اما جواب نگرفتم 

خروجی چندتا دستور رو باید بذارید از غیب که نمیشه چیزی گفت!
 یا لیست کارایی که قبلش کردید ...

[esfahan2000]

خروجی چند تا دستور که بالا هست.
اینم مثلا خروجی یه دستور که فرض کن میخام یه بسته را نصب کنم:

[esfahan2000]

خروجی قبلی اشتباه شد درستش اینه:

کد: [انتخاب]

root@Debian:~# aptitude install gns3
The following NEW packages will be installed:
  dynamips{a} gns3 libphonon4{a} libqt4-assistant{a} libqt4-help{a}
  libqt4-scripttools{a} libqt4-svg{a} libqt4-test{a} libqt4-webkit{a}
  libqt4-xmlpatterns{a} python-qt4{a} python-sip{a}
The following partially installed packages will be configured:
  debconf man-db
0 packages upgraded, 12 newly installed, 0 to remove and 1 not upgraded.
Need to get 3,115 kB/18.1 MB of archives. After unpacking 62.3 MB will be used.
Do you want to continue? [Y/n/?] y
Get:1 ftp://ftp.debian.org/debian/ stable/non-free gns3 all 0.7.2-1 [3,115 kB]
Fetched 3,115 kB in 3min 55s (13.2 kB/s)                                       
debconf: Perl may be unconfigured (Can't locate strict.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at (eval 1) line 2.
BEGIN failed--compilation aborted at (eval 1) line 2.
) -- aborting
Setting up debconf (1.5.44) ...
Can't locate strict.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at /usr/share/debconf/frontend line 5.
BEGIN failed--compilation aborted at /usr/share/debconf/frontend line 5.
dpkg: error processing debconf (--configure):
 subprocess installed post-installation script returned error exit status 2
configured to not write apport reports
                                      Errors were encountered while processing:
 debconf
E: Sub-process /usr/bin/dpkg returned an error code (1)
A package failed to install.  Trying to recover:
Setting up debconf (1.5.44) ...
Can't locate strict.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at /usr/share/debconf/frontend line 5.
BEGIN failed--compilation aborted at /usr/share/debconf/frontend line 5.
dpkg: error processing debconf (--configure):
 subprocess installed post-installation script returned error exit status 2
dpkg: dependency problems prevent configuration of man-db:
 man-db depends on debconf (>= 1.2.0) | debconf-2.0; however:
  Package debconf is not configured yet.
  Package debconf-2.0 is not installed.
  Package debconf which provides debconf-2.0 is not configured yet.
dpkg: error processing man-db (--configure):
 dependency problems - leaving unconfigured
dpkg: error processing python-crypto (--configure):
 Package is in a very bad inconsistent state - you should
 reinstall it before attempting configuration.
Errors were encountered while processing:
 debconf
 man-db
 python-crypto
البته اینم بگم قبلا فقط man-db این پایین بود.

[AliRezaiMi]

خروجی چند تا دستور که بالا هست.
اینم مثلا خروجی یه دستور که فرض کن میخام یه بسته را نصب کنم:

؟

[esfahan2000]

خروجی چند تا دستور که بالا هست.
اینم مثلا خروجی یه دستور که فرض کن میخام یه بسته را نصب کنم:

؟

پست ۸ را نگاه کن

[AliRezaiMi]

خروجی چند تا دستور که بالا هست.
اینم مثلا خروجی یه دستور که فرض کن میخام یه بسته را نصب کنم:

؟

پست ۸ را نگاه کن

دوست عزیز دستورات من اینا بود :

apt-get update
apt-get dist-upgrade
اگر کار نداد باز ببینید میشه پکیج رو پاک کرد یا نه :
apt-get purge man-db
و خروجی شما نصب یه پکیج با ابزار aptitude ، حالا این چه کمکی به من میکنه واقعا نمیدونم.

[npdu]

خروجی قبلی اشتباه شد درستش اینه:

کد: [انتخاب]

root@Debian:~# aptitude install gns3
The following NEW packages will be installed:
  dynamips{a} gns3 libphonon4{a} libqt4-assistant{a} libqt4-help{a}
  libqt4-scripttools{a} libqt4-svg{a} libqt4-test{a} libqt4-webkit{a}
  libqt4-xmlpatterns{a} python-qt4{a} python-sip{a}
The following partially installed packages will be configured:
  debconf man-db
0 packages upgraded, 12 newly installed, 0 to remove and 1 not upgraded.
Need to get 3,115 kB/18.1 MB of archives. After unpacking 62.3 MB will be used.
Do you want to continue? [Y/n/?] y
Get:1 ftp://ftp.debian.org/debian/ stable/non-free gns3 all 0.7.2-1 [3,115 kB]
Fetched 3,115 kB in 3min 55s (13.2 kB/s)                                       
debconf: Perl may be unconfigured (Can't locate strict.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at (eval 1) line 2.
BEGIN failed--compilation aborted at (eval 1) line 2.
) -- aborting
Setting up debconf (1.5.44) ...
Can't locate strict.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at /usr/share/debconf/frontend line 5.
BEGIN failed--compilation aborted at /usr/share/debconf/frontend line 5.
dpkg: error processing debconf (--configure):
 subprocess installed post-installation script returned error exit status 2
configured to not write apport reports
                                      Errors were encountered while processing:
 debconf
E: Sub-process /usr/bin/dpkg returned an error code (1)
A package failed to install.  Trying to recover:
Setting up debconf (1.5.44) ...
Can't locate strict.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at /usr/share/debconf/frontend line 5.
BEGIN failed--compilation aborted at /usr/share/debconf/frontend line 5.
dpkg: error processing debconf (--configure):
 subprocess installed post-installation script returned error exit status 2
dpkg: dependency problems prevent configuration of man-db:
 man-db depends on debconf (>= 1.2.0) | debconf-2.0; however:
  Package debconf is not configured yet.
  Package debconf-2.0 is not installed.
  Package debconf which provides debconf-2.0 is not configured yet.
dpkg: error processing man-db (--configure):
 dependency problems - leaving unconfigured
dpkg: error processing python-crypto (--configure):
 Package is in a very bad inconsistent state - you should
 reinstall it before attempting configuration.
Errors were encountered while processing:
 debconf
 man-db
 python-crypto
البته اینم بگم قبلا فقط man-db این پایین بود.

از دایرکتوری

کد: [انتخاب]

/var/cache/apt/archivesچند تا از آخرین فایل هایی که دانلود شده مثل python-crypto که در خطا آورده را حذف یا به home منتقل کن و دوباره آپدیت کن.