من مودمم رو اسکن کردم . مشخصاتش اینه : خودم نتونستم بفهمم . اگه ممکنه نوع مودمم رو بگین که از اون آدرس که دادید بتونم نصبش کنم.
Only plain text email is forwarded by the Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.25-14.fc9.i686
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through:
http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at
http://www.linmodems.org -------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.25-14.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Thu May 1 06:28:41 EDT 2008
scanModem update of: 2008_08_26
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 054c:01c8 Sony Corp.
ID 1d6b:0002 Linux Foundation 2.0 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 09da:000a A4 Tech Co., Ltd Port Mouse
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 1d6b:0002 Linux Foundation 2.0 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
USB modems not recognized
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:284b 104d:902d Audio device: Intel Corporation 82801H
Modem interrupt assignment and sharing:
22: 872 855 IO-APIC-fasteoi HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.16
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: ALC262 Analog : ALC262 Analog : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfc300000 irq 22
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.25-14.fc9.i686/kernel/sound/pci/hda/snd-hda-intel.ko
The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Conexant ID 2c06
Address: 1
Vendor Id: 0x14f12c06
Subsystem Id: 0x104d1700
Revision Id: 0x100000
Modem Function Group: 0x2
The audio card hosts a softmodem chip: 0x14f12c06
14f1 is the Conexant Vendor ID, and 0x14f12c06 a softmodem chipset.
Get a hsfmodem package through
http://www.linuxant.comIf not a Conexant modem, the driver hsfmodem-drivers with its dependent drivers:
----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=104d:902d
IRQ=22
HDA=8086:284b
SOFT=8086:284b.HDA
CHIP=0x14f12c06
IDENT=hsfmodem
Driver=hsfmodem-drivers
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801H
Primary device ID: 8086:284b
Subsystem PCI_id 104d:902d
Softmodem codec or chipset from diagnostics: 0x14f12c06
from Archives:
The HDA card softmodem chip is 0x14f12c06
Support type needed or chipset: hsfmodem
Writing DOCs/Intel.txt
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
Start at
http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.25_14.fc9.i686
They can be found through
http://www.linuxant.com/drivers/hsf/full/downloads.php A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Support for Conexant chips hosted on High Definition Audio cards may require
installation of additional packages, one of the alsa-driver-linuxant packages
on
http://www.linuxant.com/alsa-driver/ At the same time download the
alsa-driver-1.0.17-1.patch , in case it prove to be later needed. During the
hsfmodem install, there will be a message if there is necessary installation of
alsa-driver-linuxant
The installation command for a .deb suffic packages is, with root/adm permission:
alsa* -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
There may a message that "Dependencies" are not satisfied. In this case the Ubuntu/Debian packages to be installed are linux-libc-dev & libc6-dev. Package
names may be different for other Linuxes. If not on your install CD, these
packages can be searched for at
http://packages.ubuntu.com. After download,
they can be coinstalled with:
dpkg -i li*.deb
Again try the alsa-driver-linuxant
There may be a message that the patch must be applied. In this case get the
ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2 Under Linux, this package is unpacked with:
$ tar jxf alsa*.tar.bz2
Next the patch is applied with:
$ patch -p0 < alsa-driver-1.0.17-1.patch
See
http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.htmlfor details on compiling and installing replacement snd-hda-intel + its
dependent drivers.
After the installation is completed, rerun the hsfmodem installation.
Reboot and try to detect the modem with Root permission:
wvdialconf /etc/wvdial.conf
Start at
http://www.linuxant.com/drivers/hsf/full for
eventually download of a hsfmodem-7.68.00.12full_k.
.zip package
with
the package type (deb, rpm, tar etc)
These packages have compiled drivers but will also compile a driver,
if there is a mismatch between the resident kernel and provided driver.
The generic hsfmodem-7.68.00.12full.tar.gz package only provides compiling support
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.0
and the compiler used in kernel assembly: 4.3.0
linux-headers-2.6.25-14.fc9.i686 resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through
http://packages.ubuntu.comOnce downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-r-xr-xr-x 1 root root 317736 2008-03-12 12:44 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.htmlTo enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
lock
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see
http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.htmlRead Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 virbr0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave", NAME="modems/mwave", GROUP="uucp"
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
موضوع: درایور مودم لینوکسی (دفعات بازدید: 1716 بار)
