سلام من تو نصب این کارت مشکل دارم همه ست های فارسی و بعضی از انگلیسی ها رو خوندم ولی نتیجه نداد اینجا مطرح میکنم اگه کسی بلده کمک کنه
این خروجی lspci
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400 GS] (rev a1)
02:01.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
اینم خروجی dmesg
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f4a90] f4a90
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262027
[ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 272 pages used for memmap
[ 0.000000] HighMem zone: 34530 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:b0000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c1805000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259979
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=061f99af-64e7-43fc-9151-50dac67a8965 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5242560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0)
[ 0.000000] Memory: 1018044k/1048512k available (4565k kernel code, 29584k reserved, 2143k data, 540k init, 139208k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3349.155 MHz processor.
[ 0.001623] Console: colour VGA+ 80x25
[ 0.001627] console [tty0] enabled
[ 0.001746] hpet clockevent registered
[ 0.001750] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001756] Calibrating delay loop (skipped), value calculated using timer frequency.. 6698.31 BogoMIPS (lpj=13396620)
[ 0.001777] Security Framework initialized
[ 0.001800] AppArmor: AppArmor initialized
[ 0.001809] Mount-cache hash table entries: 512
[ 0.001961] Initializing cgroup subsys ns
[ 0.001967] Initializing cgroup subsys cpuacct
[ 0.001971] Initializing cgroup subsys memory
[ 0.001979] Initializing cgroup subsys freezer
[ 0.001982] Initializing cgroup subsys net_cls
[ 0.002002] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.002006] CPU: L2 cache: 512K
[ 0.002009] CPU: Hyper-Threading is disabled
[ 0.002013] mce: CPU supports 4 MCE banks
[ 0.002026] CPU0: Thermal monitoring enabled (TM1)
[ 0.002031] using mwait in idle threads.
[ 0.002039] Performance Counters: no PMU driver, software counters only.
[ 0.002046] Checking 'hlt' instruction... OK.
[ 0.016955] SMP alternatives: switching to UP code
[ 0.026762] ACPI: Core revision 20090521
[ 0.036389] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078571] CPU0: Intel(R) Celeron(R) D CPU 3.33GHz stepping 05
[ 0.080001] Brought up 1 CPUs
[ 0.080001] Total of 1 processors activated (6698.31 BogoMIPS).
[ 0.080001] CPU0 attaching NULL sched-domain.
[ 0.080001] Booting paravirtualized kernel on bare hardware
[ 0.080001] regulator: core version 0.5
[ 0.080001] Time: 10:16:50 Date: 04/22/10
[ 0.080001] NET: Registered protocol family 16
[ 0.080001] EISA bus registered
[ 0.080001] ACPI: bus type pci registered
[ 0.080001] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.080001] PCI: MCFG area at f0000000 reserved in E820
[ 0.080001] PCI: Using MMCONFIG for extended config space
[ 0.080001] PCI: Using configuration type 1 for base access
[ 0.080001] bio: create slab <bio-0> at 0
[ 0.080001] ACPI: EC: Look up EC in DSDT
[ 0.084154] ACPI: Interpreter enabled
[ 0.084166] ACPI: (supports S0 S1 S4 S5)
[ 0.084192] ACPI: Using IOAPIC for interrupt routing
[ 0.088924] ACPI: No dock devices found.
[ 0.089036] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.089169] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.089173] pci 0000:00:01.0: PME# disabled
[ 0.089248] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe6000000-0xe6003fff]
[ 0.089297] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.089302] pci 0000:00:1b.0: PME# disabled
[ 0.089353] pci 0000:00:1d.0: reg 20 io port: [0xbc00-0xbc1f]
[ 0.089409] pci 0000:00:1d.1: reg 20 io port: [0xb000-0xb01f]
[ 0.089466] pci 0000:00:1d.2: reg 20 io port: [0xb400-0xb41f]
[ 0.089521] pci 0000:00:1d.3: reg 20 io port: [0xb800-0xb81f]
[ 0.089575] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe6004000-0xe60043ff]
[ 0.089758] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.089763] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.089767] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.089771] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.089829] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.089836] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.089843] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.089849] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.089856] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f]
[ 0.089884] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.089888] pci 0000:00:1f.2: PME# disabled
[ 0.089940] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.090003] pci 0000:01:00.0: reg 10 32bit mmio: [0xe2000000-0xe2ffffff]
[ 0.090014] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.090025] pci 0000:01:00.0: reg 1c 64bit mmio: [0xe0000000-0xe1ffffff]
[ 0.090032] pci 0000:01:00.0: reg 24 io port: [0x9000-0x907f]
[ 0.090039] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.090111] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 0.090115] pci 0000:00:01.0: bridge 32bit mmio: [0xe0000000-0xe3ffffff]
[ 0.090121] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.090166] pci 0000:02:01.0: reg 10 32bit mmio: [0xe5001000-0xe50013ff]
[ 0.090220] pci 0000:02:01.0: supports D1 D2
[ 0.090262] pci 0000:02:05.0: reg 10 io port: [0xa000-0xa0ff]
[ 0.090270] pci 0000:02:05.0: reg 14 32bit mmio: [0xe5000000-0xe50000ff]
[ 0.090299] pci 0000:02:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.090320] pci 0000:02:05.0: supports D1 D2
[ 0.090322] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.090327] pci 0000:02:05.0: PME# disabled
[ 0.090370] pci 0000:00:1e.0: transparent bridge
[ 0.090375] pci 0000:00:1e.0: bridge io port: [0xa000-0xafff]
[ 0.090379] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4000000-0xe5ffffff]
[ 0.090395] pci_bus 0000:00: on NUMA node 0
[ 0.090400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.090586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.098477] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.098592] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.098704] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[ 0.098815] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.098925] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.099038] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.099148] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.099259] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.099482] SCSI subsystem initialized
[ 0.099559] libata version 3.00 loaded.
[ 0.099648] usbcore: registered new interface driver usbfs
[ 0.099668] usbcore: registered new interface driver hub
[ 0.099696] usbcore: registered new device driver usb
[ 0.099847] ACPI: WMI: Mapper loaded
[ 0.099849] PCI: Using ACPI for IRQ routing
[ 0.100020] Bluetooth: Core ver 2.15
[ 0.100058] NET: Registered protocol family 31
[ 0.100061] Bluetooth: HCI device and connection manager initialized
[ 0.100064] Bluetooth: HCI socket layer initialized
[ 0.100066] NetLabel: Initializing
[ 0.100068] NetLabel: domain hash size = 128
[ 0.100070] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.100087] NetLabel: unlabeled traffic allowed by default
[ 0.100122] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.100128] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.105592] pnp: PnP ACPI init
[ 0.105619] ACPI: bus type pnp registered
[ 0.108883] pnp: PnP ACPI: found 15 devices
[ 0.108886] ACPI: ACPI bus type pnp unregistered
[ 0.108892] PnPBIOS: Disabled by ACPI PNP
[ 0.108905] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.108909] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.108912] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.108915] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.108918] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.108928] system 00:0b: ioport range 0x400-0x4bf could not be reserved
[ 0.108935] system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.108941] system 00:0d: iomem range 0xcce00-0xcffff has been reserved
[ 0.108945] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.108948] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.108951] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 0.108954] system 00:0d: iomem range 0x3fff0000-0x3fffffff could not be reserved
[ 0.108957] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.108960] system 00:0d: iomem range 0x100000-0x3ffeffff could not be reserved
[ 0.108964] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.108967] system 00:0d: iomem range 0xfed13000-0xfed1dfff has been reserved
[ 0.108970] system 00:0d: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.108973] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.108976] system 00:0d: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.108979] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.108982] system 00:0d: iomem range 0xe0000-0xeffff has been reserved
[ 0.143662] AppArmor: AppArmor Filesystem Enabled
[ 0.143696] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.143700] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.143705] pci 0000:00:01.0: MEM window: 0xe0000000-0xe3ffffff
[ 0.143709] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.143716] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.143719] pci 0000:00:1e.0: IO window: 0xa000-0xafff
[ 0.143725] pci 0000:00:1e.0: MEM window: 0xe4000000-0xe5ffffff
[ 0.143729] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x400fffff
[ 0.143743] alloc irq_desc for 16 on node -1
[ 0.143745] alloc kstat_irqs on node -1
[ 0.143752] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.143757] pci 0000:00:01.0: setting latency timer to 64
[ 0.143764] pci 0000:00:1e.0: setting latency timer to 64
[ 0.143770] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.143773] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.143776] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
[ 0.143778] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xe3ffffff]
[ 0.143781] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.143784] pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
[ 0.143787] pci_bus 0000:02: resource 1 mem: [0xe4000000-0xe5ffffff]
[ 0.143789] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x400fffff]
[ 0.143792] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.143794] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.143836] NET: Registered protocol family 2
[ 0.143941] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.144311] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.144949] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.145319] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.145324] TCP reno registered
[ 0.145461] NET: Registered protocol family 1
[ 0.145544] Trying to unpack rootfs image as initramfs...
[ 0.356136] Freeing initrd memory: 7458k freed
[ 0.361742] cpufreq-nforce2: No nForce2 chipset.
[ 0.361776] Scanning for low memory corruption every 60 seconds
[ 0.361893] audit: initializing netlink socket (disabled)
[ 0.361912] type=2000 audit(1271931410.360:1): initialized
[ 0.369744] highmem bounce pool size: 64 pages
[ 0.369752] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.371108] VFS: Disk quotas dquot_6.5.2
[ 0.371170] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.371776] fuse init (API version 7.12)
[ 0.371869] msgmni has been set to 1731
[ 0.372121] alg: No test for stdrng (krng)
[ 0.372138] io scheduler noop registered
[ 0.372141] io scheduler anticipatory registered
[ 0.372143] io scheduler deadline registered
[ 0.372201] io scheduler cfq registered (default)
[ 0.372309] pci 0000:01:00.0: Boot video device
[ 0.372426] alloc irq_desc for 24 on node -1
[ 0.372429] alloc kstat_irqs on node -1
[ 0.372440] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.372448] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.372537] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.372568] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.372709] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.372714] ACPI: Power Button [PWRF]
[ 0.372770] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.372773] ACPI: Power Button [PWRB]
[ 0.373074] processor LNXCPU:00: registered as cooling_device0
[ 0.373078] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 0.374938] isapnp: Scanning for PnP cards...
[ 0.504025] Switched to high resolution mode on CPU 0
[ 0.728206] isapnp: No Plug & Play device found
[ 0.729427] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.729540] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.729641] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.729951] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.730086] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.731209] brd: module loaded
[ 0.731682] loop: module loaded
[ 0.731778] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.731895] ata_piix 0000:00:1f.2: version 2.13
[ 0.731919] alloc irq_desc for 19 on node -1
[ 0.731921] alloc kstat_irqs on node -1
[ 0.731929] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.731935] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 0.731986] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.732115] scsi0 : ata_piix
[ 0.732220] scsi1 : ata_piix
[ 0.733099] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.733102] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.733955] Fixed MDIO Bus: probed
[ 0.733997] PPP generic driver version 2.4.2
[ 0.734115] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.734140] alloc irq_desc for 23 on node -1
[ 0.734143] alloc kstat_irqs on node -1
[ 0.734151] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.734169] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.734174] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.734241] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.738145] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 0.738534] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe6004000
[ 0.752009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.752122] usb usb1: configuration #1 chosen from 1 choice
[ 0.752158] hub 1-0:1.0: USB hub found
[ 0.752168] hub 1-0:1.0: 8 ports detected
[ 0.752248] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.752275] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.752322] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.752332] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.752336] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.752383] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.752410] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00
[ 0.752493] usb usb2: configuration #1 chosen from 1 choice
[ 0.752523] hub 2-0:1.0: USB hub found
[ 0.752536] hub 2-0:1.0: 2 ports detected
[ 0.752587] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.752594] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.752598] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.752632] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.752665] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
[ 0.752745] usb usb3: configuration #1 chosen from 1 choice
[ 0.752775] hub 3-0:1.0: USB hub found
[ 0.752784] hub 3-0:1.0: 2 ports detected
[ 0.752834] alloc irq_desc for 18 on node -1
[ 0.752838] alloc kstat_irqs on node -1
[ 0.752845] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.752851] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.752854] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.752889] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.752922] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
[ 0.753008] usb usb4: configuration #1 chosen from 1 choice
[ 0.753038] hub 4-0:1.0: USB hub found
[ 0.753045] hub 4-0:1.0: 2 ports detected
[ 0.753099] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.753106] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.753110] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.753143] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.753176] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
[ 0.753258] usb usb5: configuration #1 chosen from 1 choice
[ 0.753287] hub 5-0:1.0: USB hub found
[ 0.753295] hub 5-0:1.0: 2 ports detected
[ 0.753409] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.753763] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.753771] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.753842] mice: PS/2 mouse device common for all mice
[ 0.753956] rtc_cmos 00:03: RTC can wake from S4
[ 0.753994] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.754021] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.754143] device-mapper: uevent: version 1.0.3
[ 0.754254] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.754338] device-mapper: multipath: version 1.1.0 loaded
[ 0.754342] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.754480] EISA: Probing bus 0 at eisa.0
[ 0.754508] EISA: Detected 0 cards.
[ 0.754556] cpuidle: using governor ladder
[ 0.754559] cpuidle: using governor menu
[ 0.755137] TCP cubic registered
[ 0.755274] NET: Registered protocol family 10
[ 0.755742] lo: Disabled Privacy Extensions
[ 0.756112] NET: Registered protocol family 17
[ 0.756139] Bluetooth: L2CAP ver 2.13
[ 0.756141] Bluetooth: L2CAP socket layer initialized
[ 0.756144] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.756146] Bluetooth: SCO socket layer initialized
[ 0.756190] Bluetooth: RFCOMM TTY layer initialized
[ 0.756194] Bluetooth: RFCOMM socket layer initialized
[ 0.756196] Bluetooth: RFCOMM ver 1.11
[ 0.756235] Using IPI No-Shortcut mode
[ 0.756319] PM: Resume from disk failed.
[ 0.756337] registered taskstats version 1
[ 0.756428] Magic number: 6:419:275
[ 0.756451] tty tty12: hash matches
[ 0.756502] rtc_cmos 00:03: setting system clock to 2010-04-22 10:16:51 UTC (1271931411)
[ 0.756506] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.756508] EDD information not available.
[ 0.771464] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.908209] ata1.00: HPA unlocked: 976771055 -> 976773168, native 976773168
[ 0.908215] ata1.00: ATA-8: WDC WD5000AADS-00M2B0, 01.00A01, max UDMA/133
[ 0.908218] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.924730] ata1.00: configured for UDMA/133
[ 0.924856] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
[ 0.925000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.925047] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.925105] sd 0:0:0:0: [sda] Write Protect is off
[ 0.925109] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.925138] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.925287] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 1.015649] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.084316] ata2.01: ATAPI: HP Combo 535d, RPK2, max UDMA/33
[ 1.116217] ata2.01: configured for UDMA/33
[ 1.118090] scsi 1:0:1:0: CD-ROM HP Combo 535d RPK2 PQ: 0 ANSI: 5
[ 1.124050] sr0: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
[ 1.124054] Uniform CD-ROM driver Revision: 3.20
[ 1.124154] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 1.124220] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 1.124252] Freeing unused kernel memory: 540k freed
[ 1.124670] Write protecting the kernel text: 4568k
[ 1.124698] Write protecting the kernel read-only data: 1836k
[ 1.299625] Linux agpgart interface v0.103
[ 1.339538] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.339560] alloc irq_desc for 21 on node -1
[ 1.339563] alloc kstat_irqs on node -1
[ 1.339571] r8169 0000:02:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.339599] r8169 0000:02:05.0: no PCI Express capability
[ 1.349043] eth0: RTL8169sc/8110sc at 0xf8096000, 00:1a:4d:8d:e1:d8, XID 18000000 IRQ 21
[ 1.396391] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 1.575153] usb 4-2: configuration #1 chosen from 1 choice
[ 3.120076] PM: Starting manual resume from disk
[ 3.120082] PM: Resume from partition 8:10
[ 3.120084] PM: Checking hibernation image.
[ 3.120301] PM: Resume from disk failed.
[ 3.144192] EXT4-fs (sda9): barriers enabled
[ 3.153554] kjournald2 starting: pid 349, dev sda9:8, commit interval 5 seconds
[ 3.153570] EXT4-fs (sda9): delayed allocation enabled
[ 3.153574] EXT4-fs: file extents enabled
[ 3.154200] EXT4-fs: mballoc enabled
[ 3.154216] EXT4-fs (sda9): mounted filesystem with ordered data mode
[ 3.675687] type=1505 audit(1271931414.415:2): operation="profile_load" pid=372 name=/usr/share/gdm/guest-session/Xsession
[ 3.678580] type=1505 audit(1271931414.419:3): operation="profile_load" pid=373 name=/sbin/dhclient3
[ 3.679252] type=1505 audit(1271931414.419:4): operation="profile_load" pid=373 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.679615] type=1505 audit(1271931414.419:5): operation="profile_load" pid=373 name=/usr/lib/connman/scripts/dhclient-script
[ 3.726917] type=1505 audit(1271931414.467:6): operation="profile_load" pid=374 name=/usr/bin/evince
[ 3.737975] type=1505 audit(1271931414.479:7): operation="profile_load" pid=374 name=/usr/bin/evince-previewer
[ 3.744491] type=1505 audit(1271931414.487:8): operation="profile_load" pid=374 name=/usr/bin/evince-thumbnailer
[ 3.776593] type=1505 audit(1271931414.519:9): operation="profile_load" pid=376 name=/usr/lib/cups/backend/cups-pdf
[ 3.777376] type=1505 audit(1271931414.519:10): operation="profile_load" pid=376 name=/usr/sbin/cupsd
[ 4.484470] Adding 441748k swap on /dev/sda10. Priority:-1 extents:1 across:441748k
[ 5.522398] EXT4-fs (sda9): internal journal on sda9:8
[ 5.603736] udev: starting version 147
[ 6.715839] psmouse serio1: ID: 10 00 64
[ 6.758920] intel_rng: FWH not detected
[ 6.767402] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 6.767527] usbcore: registered new interface driver btusb
[ 6.773055] parport_pc 00:08: reported by Plug and Play ACPI
[ 6.773104] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 6.784724] lp: driver loaded but no devices found
[ 6.825829] ppdev: user-space parallel port driver
[ 6.868222] lp0: using parport0 (interrupt-driven).
[ 6.894310] Linux video capture interface: v2.00
[ 7.013969] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.259900] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 7.411885] nvidia: module license 'NVIDIA' taints kernel.
[ 7.411891] Disabling lock debugging due to kernel taint
[ 7.668649] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.668660] nvidia 0000:01:00.0: setting latency timer to 64
[ 7.668900] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009
[ 8.040764] saa7134: `3;tuner=2' invalid for parameter `card'
[ 8.055586] saa7134: `3;tuner=2' invalid for parameter `card'
[ 8.103691] nf_conntrack version 0.5.0 (16383 buckets, 65532 max)
[ 8.103925] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 8.103928] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 8.103931] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 8.607805] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.607846] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.666707] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.901367] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 11.907956] r8169: eth0: link up
[ 12.718195] __ratelimit: 3 callbacks suppressed
[ 12.718199] type=1505 audit(1271915223.459:12): operation="profile_replace" pid=1282 name=/usr/share/gdm/guest-session/Xsession
[ 12.724843] type=1505 audit(1271915223.467:13): operation="profile_replace" pid=1286 name=/sbin/dhclient3
[ 12.725520] type=1505 audit(1271915223.467:14): operation="profile_replace" pid=1286 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 12.725886] type=1505 audit(1271915223.467:15): operation="profile_replace" pid=1286 name=/usr/lib/connman/scripts/dhclient-script
[ 12.731167] type=1505 audit(1271915223.471:16): operation="profile_replace" pid=1287 name=/usr/bin/evince
[ 12.791795] type=1505 audit(1271915223.531:17): operation="profile_replace" pid=1287 name=/usr/bin/evince-previewer
[ 12.810447] type=1505 audit(1271915223.551:18): operation="profile_replace" pid=1287 name=/usr/bin/evince-thumbnailer
[ 12.821026] type=1505 audit(1271915223.563:19): operation="profile_replace" pid=1315 name=/usr/lib/cups/backend/cups-pdf
[ 12.821812] type=1505 audit(1271915223.563:20): operation="profile_replace" pid=1315 name=/usr/sbin/cupsd
[ 12.844288] type=1505 audit(1271915223.587:21): operation="profile_replace" pid=1320 name=/usr/sbin/tcpdump
[ 13.049922] NET: Registered protocol family 24
[ 18.119149] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.119153] Bluetooth: BNEP filters: protocol multicast
[ 18.239217] Bridge firewalling registered
[ 22.536016] eth0: no IPv6 routers present
[ 3382.903281] saa7134: `3;tuner=2' invalid for parameter `card'
[ 3591.401127] Linux video capture interface: v2.00
[ 3591.443371] saa7134: `3;tuner=2' invalid for parameter `card'
[ 3794.697107] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 3794.697164] saa7134 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3794.697172] saa7130[0]: found at 0000:02:01.0, rev: 1, irq: 19, latency: 96, mmio: 0xe5001000
[ 3794.697180] saa7130[0]: subsystem: 1131:0000, board: Sabrent SBT-TVFM (saa7130) [card=42,insmod option]
[ 3794.697203] saa7130[0]: board init: gpio is 804000
[ 3794.697210] IRQ 19/saa7130[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 3794.800220] saa7130[0]: Huh, no eeprom present (err=-5)?
[ 3794.828355] saa7130[0]: i2c scan: found device @ 0xc0 [tuner (analog)]
[ 3794.836020] saa7130[0]: i2c scan: found device @ 0xc2 [???]
[ 3794.841594] i2c-adapter i2c-3: Invalid 7-bit address 0x7a
[ 3794.936017] All bytes are equal. It is not a TEA5767
[ 3794.936127] tuner 3-0060: chip found @ 0xc0 (saa7130[0])
[ 3794.960025] tuner-simple 3-0060: creating new instance
[ 3794.960031] tuner-simple 3-0060: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
[ 3794.968127] saa7130[0]: registered device video0 [v4l2]
[ 3794.968160] saa7130[0]: registered device vbi0
[ 3794.968190] saa7130[0]: registered device radio0
[ 3794.988981] saa7134 ALSA driver for DMA sound loaded
[ 3794.988987] saa7130[0]/alsa: Sabrent SBT-TVFM (saa7130) doesn't support digital audio
[ 3831.908905] saa7134 ALSA driver for DMA sound unloaded
[ 3831.922631] tuner-simple 3-0060: destroying instance
[ 3831.979808] saa7134: `3;tuner=2' invalid for parameter `card'
[ 4916.827306] saa7134: `3;tuner=2' invalid for parameter `card'
[ 4953.791881] saa7134: `3;tuner=2' invalid for parameter `card'
موضوع: مشکل در نصب کارت تی وی فیلیس7130 (دفعات بازدید: 2288 بار)
