اطلاعات بیشتری نیاز است این جا http://wiki.ubuntu-ir.org/BootInfoScript مراجعه و خروجی فایل RESULTS.TXT رو در اینجا قرار بدید
خروجیه فایل رو گذاشتم.به یه نکته رسیدم که اصلا درایوی که با Gparted فرمت شده باشه رو نمیتونم استفاده بکنم.آخه میخواستم با FSCK درایو, swap رو اسکن کنم .چون نمیتونستم اول Unmountesh کزدم و بعدشم فرمتش کردم تا نوعش بشه EXT3 بعد اسکنش کردم کارم که تموم شد دوباره فرمتش کردم تا بشه swap از اون موقع , موقع بوت پیغام میاد که نمیتونه swap رو مانت کنه.پارتیشن جدیدی رو هم که ساختم نمی تونم استفاده بکنم.خلاصه اینکه دوباره تو محیط خود اوبونتو فرمتش کردم ودرست شد اما swap رو نمیتونم درست کنم.حالا برای درست کردن SWAP باید چی کار کنم.تو ذهنمه که دوباره از اول اوبونتو بریزم.
یکی کمک کنه.
============================= Boot Info Summary: ==============================
=> Grub1.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #1 for /boot/grub.
sda1: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda4: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x00000080
Partition Boot Start End Size Id System
/dev/sda1 * 63 193,374,404 193,374,342 83 Linux
/dev/sda2 300,560,085 312,576,704 12,016,620 5 Extended
/dev/sda5 300,560,148 312,576,704 12,016,557 82 Linux swap / Solaris
/dev/sda4 193,374,405 300,560,084 107,185,680 8e Linux LVM
blkid -c /dev/null: ____________________________________________________________
/dev/sda1: UUID="2bb55435-17c7-4f8f-981c-8b5c2c998b1b" TYPE="ext4"
/dev/sda4: LABEL="University" UUID="579e1ad9-3af0-4613-8038-eaebbb27fe07" SEC_TYPE="ext2" TYPE="ext3"
/dev/sda5: UUID="102c66cb-a6c1-4ba6-a613-75fefcfee3a0" TYPE="swap"
=============================== "mount" output: ===============================
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/foad/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=foad)
=========================== sda1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 2bb55435-17c7-4f8f-981c-8b5c2c998b1b
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 2bb55435-17c7-4f8f-981c-8b5c2c998b1b
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=2bb55435-17c7-4f8f-981c-8b5c2c998b1b ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 2bb55435-17c7-4f8f-981c-8b5c2c998b1b
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=2bb55435-17c7-4f8f-981c-8b5c2c998b1b ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda1 during installation
UUID=2bb55435-17c7-4f8f-981c-8b5c2c998b1b / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=091d5d9b-1c33-46f8-91f5-d6d6a5376b93 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda1: Location of files loaded by Grub: ===================
.0GB: boot/grub/grub.cfg
.0GB: boot/initrd.img-2.6.31-14-generic
.0GB: boot/vmlinuz-2.6.31-14-generic
.0GB: initrd.img
.0GB: vmlinuz
موضوع: پارتیشن بندی(حل شد) (دفعات بازدید: 2310 بار)
