با سلام
من با دستور sudo wvdialconf اينها رو ديدم:
canning your serial ports for a modem.
Modem Port Scan<*1>: Scanning ttySHSF0 first, /dev/modem is a link to it.
ttySHSF0<*1>: ATQ0 V1 E1 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 Z -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttySHSF0<*1>: Modem Identifier: ATI -- 56000
ttySHSF0<*1>: Speed 4800: AT -- OK
ttySHSF0<*1>: Speed 9600: AT -- OK
ttySHSF0<*1>: Speed 19200: AT -- OK
ttySHSF0<*1>: Speed 38400: AT -- OK
ttySHSF0<*1>: Speed 57600: AT -- OK
ttySHSF0<*1>: Speed 115200: AT -- OK
ttySHSF0<*1>: Speed 230400: AT -- OK
ttySHSF0<*1>: Speed 460800: AT -- OK
ttySHSF0<*1>: Max speed is 460800; that should be safe.
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2 S3 SHSF1 SHSF2 SHSF3 SHSF4 SHSF5 SHSF6
Modem Port Scan<*1>: SHSF7
Found a modem on /dev/ttySHSF0, using link /dev/modem in config.
Modem configuration written to /etc/wvdial.conf.
ttySHSF0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
نميتونم بر اساس درگاههاي موجود در Network يا pppconfig اينجا چيزي پيدا کنم:
/dev/ttvs0
/dev/ttys1
/dev/ttys2
/dev/ttys3
لطفا بفرماييد درگاه مودم سيستم من آيا در اين گزارش نوشته شده؟
متشکرم
موضوع: راهنمايي درباره تشخيص درگاه مودم (دفعات بازدید: 7309 بار)
