سلام.من نتایج اجرای scanmodem رو براتون میزارم وشما لطف کنین با جزییات کامل بگین برای ادامه چی کار باید بکنم.
فایل 1stRead:
If you want help from the email group Discuss@linmodems.org, PLEASE join the List
at http://www.linmodems.org . Otherwise your messages will be delayed until the evening,
waiting for someone to verify it is not junk mail, before forwarding through the List server.
The files in this Modem/ folder have the following roles:
ModemData.txt - Diagnostics and accumulated information cogent to your modem and host system.
This is the ONLY file which should be sent to the List DISCUSS@LINMODEMS.ORG ,
if further help is needed. Send your email and attachments as plain text as
other formats are rejected by the List Server, to avoid virus transmission.
Always send the ENTIRE ModemData.txt, as It includes subtle diagnostic ouputs needed
to best guide you. Please in the covering email mention your Country, to enable Country
specific advice.
Always use the most recent update of scanModem accessed ONLY at
http://linmodems.technion.ac.il/packages/scanModem.gz
to produce ModemData.txt
URLs to cogent advice are regularly updated, so your problem may be solved therein.
Please Do NOT send Do NOT send other files in this folder Modem/
Several informative files without diagnostics are in the DOCs subfolder.
A file(s) specific to your modem chipset will be written, such as:
Smartlink.txt, Conexant.txt, Intel.txt , etc
YourModem.txt - Guidance about operating your particular System, for your benefit
It should NOT be sent to Discuss@linmodems.org
Rational.txt - Motivations of this scanModem package.
DriverCompiling.txt - Explains the roles of additional files which may have to be installed
to support compiling of modem drivers, and the steps to take.
SoftModem.txt - Information and instructions about "soft modems".
For these modems, additional steps may be necessary for choice of supporting software.
The primary PCI ID is that of the host audio or modem controller, which can support diverse Subsystems. It is the chipset of the Subsystem which determines the software needed.
ModemTesting.txt SHOULD be read, but after drivers have been installed.
InfoGeneral.txt has general information about the status of winmodem support under Linux,
Do read it if ModemData.txt reports that your current modem is not supported under Linux.
Unsubscribe.txt - Howto terminate email tranmissions from the List.
If you are Linux newcomer, please do locate your local Linux group through:
http://www.linux.org/groups/index.html . If you are not comfortable with English,
a local Linux user can often be of substantial assistance in getting you on to the Internet.
Only plain text email is forwarded by the Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 3.2.0-23-generic-pae
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.24
Linux version 3.2.0-23-generic-pae (buildd@palmer) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 22:19:09 UTC 2012
scanModem update of: 2011_08_08
Distrib_ID=Ubuntu
DistribCodeName=precise
AptRepositoryStem=http://ir.archive.ubuntu.com/ubuntu/
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@linmodems.org
Candidate PCI devices with modem chips are:
04:01.0 Modem: PCTel Inc HSP MicroModem 56 (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
High Definition Audio cards can host modem chips.
For candidate card in slot 04:01.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
04:01.0 134d:7890 134d:0001 Modem: PCTel Inc HSP MicroModem 56
Modem interrupt assignment and sharing:
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
--- Bootup diagnostics for card in PCI slot 04:01.0 ----
[ 0.196114] pci 0000:04:01.0: [134d:7890] type 0 class 0x000703
[ 0.196141] pci 0000:04:01.0: reg 10: [io 0xdf00-0xdf3f]
[ 0.196246] pci 0000:04:01.0: supports D2
[ 0.196251] pci 0000:04:01.0: PME# supported from D0 D2 D3hot
[ 0.196259] pci 0000:04:01.0: PME# disabled
[ 0.828040] serial 0000:04:01.0: BAR 0: set to [io 0xdf00-0xdf3f] (PCI address [0xdf00-0xdf3f])
[ 0.828055] serial 0000:04:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
The PCI slot 04:01.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
if help is needed.
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 1458:a002 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller
Modem interrupt assignment and sharing:
44: 1784 195 PCI-MSI-edge snd_hda_intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.188333] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.188359] pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
[ 0.188454] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.188462] pci 0000:00:1b.0: PME# disabled
[ 11.739350] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.739425] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 11.739462] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 11.828283] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[ 11.829821] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 11.830173] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 11.830465] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 11.830777] input: HDA Intel Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
if help is needed.
For candidate card in slot 01:00.1, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:00.1 10de:0be4 10de:0000 Audio device: NVIDIA Corporation High Definition Audio Controller
Modem interrupt assignment and sharing:
17: 322 310 IO-APIC-fasteoi snd_hda_intel
--- Bootup diagnostics for card in PCI slot 01:00.1 ----
[ 0.190104] pci 0000:01:00.1: [10de:0be4] type 0 class 0x000403
[ 0.190122] pci 0000:01:00.1: reg 10: [mem 0xfcffc000-0xfcffffff]
[ 12.622219] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 12.622292] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 13.540199] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[ 13.540617] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 13.540866] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 13.541107] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=1458:a002
IRQ=44
IDENT=PCTEL
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller
Primary device ID: 8086:27d8
Support type needed or chipset: PCTEL
At http://linmodems.technion.ac.il/pctel-linux
Get the pctel-0.9.7-9-rht-10.tar.gz
Unpack under Linux with:
tar zxf pctel*.tar.gz
and read instuctions therein.
Read DOCs/Pctel.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
Writing DOCs/Pctel.txt
Predictive diagnostics for card in bus 01:00.1:
Modem chipset detected on
NAME="Audio device: NVIDIA Corporation High Definition Audio Controller "
CLASS=0403
PCIDEV=10de:0be4
SUBSYS=10de:0000
IRQ=17
IDENT=PCTEL
For candidate modem in: 01:00.1
0403 Audio device: NVIDIA Corporation High Definition Audio Controller
Primary device ID: 10de:0be4
Support type needed or chipset: PCTEL
At http://linmodems.technion.ac.il/pctel-linux
Get the pctel-0.9.7-9-rht-10.tar.gz
Unpack under Linux with:
tar zxf pctel*.tar.gz
and read instuctions therein.
Read DOCs/Pctel.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
Writing DOCs/Pctel.txt
Predictive diagnostics for card in bus 04:01.0:
Modem chipset detected on
NAME="Modem: PCTel Inc HSP MicroModem 56 "
CLASS=0703
PCIDEV=134d:7890
SUBSYS=134d:0001
IRQ=19
HDA2=00:1b.0
HDA2=01:00.1
IDENT=PCTEL
For candidate modem in: 04:01.0
0703 Modem: PCTel Inc HSP MicroModem 56
Primary device ID: 134d:7890
Support type needed or chipset: PCTEL
At http://linmodems.technion.ac.il/pctel-linux
Get the pctel-0.9.7-9-rht-10.tar.gz
Unpack under Linux with:
tar zxf pctel*.tar.gz
and read instuctions therein.
Read DOCs/Pctel.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
Writing DOCs/Pctel.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.6.3
and the compiler used in kernel assembly: 4.6
linux-headers-3.2.0-23-generic-pae resources needed for compiling are not manifestly ready!
The patch utility is needed for compiling ALSA drivers, and possibly others.
If compiling is necessary packages must be installed, providing:
linux-headers-3.2.0-23-generic-pae
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 273272 ظپظˆط±غŒظ‡ 4 2011 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
موضوع: راهنمای جامع نصب مودم و برقراری اتصال به اینترنت (دفعات بازدید: 204903 بار)
