انجمن‌های فارسی اوبونتو

لطفاً به انجمن‌ها وارد شده و یا جهت ورود ثبت‌نام نمائید

لطفاً جهت ورود نام کاربری و رمز عبورتان را وارد نمائید


توزیع گنو/لینوکس اوبونتو ۲۰ ساله شد 🎉

نویسنده موضوع: عدم شناسایی یا نصب؟!(حل شد.)  (دفعات بازدید: 3447 بار)

0 کاربر و 2 مهمان درحال مشاهده موضوع.

آفلاین sMoHseN

  • Jr. Member
  • *
  • ارسال: 25
عدم شناسایی یا نصب؟!(حل شد.)
« : 28 تیر 1387، 03:53 ب‌ظ »
من ده صفحه این انجمن روخوندم
ویکی روهم خوندم و .....
اما مشکل من
این نتیجه اسکن مودمه
Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.24-16-generic
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686, 
Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008
 scanModem update of:  2008_07_12

 There are no blacklisted modem drivers in /etc/modprobe*  files
USB modems not recognized

For candidate card in slot 02:09.0, firmware information and bootup diagnostics are:
 PCI slot PCI ID SubsystemID Name
 ---------- --------- --------- --------------
 02:09.0 14f1:2f30 14f1:2075 Communication controller: Conexant HSF 56k Data/Fax Modem

 Modem interrupt assignment and sharing:
  4:          2   IO-APIC-edge   
 --- Bootup diagnostics for card in PCI slot 02:09.0 ----

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 02:09.0:
Modem chipset  detected on
NAME="Communication controller: Conexant HSF 56k Data/Fax Modem "
CLASS=0780
PCIDEV=14f1:2f30
SUBSYS=14f1:2075
IRQ=4
IDENT=hsfmodem

 For candidate modem in:  02:09.0
   0780 Communication controller: [color=red][b]Conexant HSF 56k Data/Fax Modem [/b][/color]
      Primary device ID:  14f1:2f30
 Support type needed or chipset: hsfmodem
 


For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt

 From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
 download hsfmodem-7.68.00.07full_k2.6.24_16_generic_ubuntu_i386.deb.zip
 Under Linux unpack with:
 $ unzip hsfmodem*.zip
 Then install with:
 $ sudo dpkg -i hsfmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details.
 
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.2.3
             and the compiler used in kernel assembly: 4.2.3


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.2
   linuc_headers base folder /lib/modules/2.6.24-16-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are n. The also required headers of package libc6 are commonly installed by default.
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 23:27 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0: 
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

[left][/left]


یعنی مدلش Conexant HSF 56k Data/Fax Modem

خوب من طبق راهنمایی ویکی فایل مربوطه رو گرفتم هرچند واسه ابونتو من نبود ماله من 8.04

و نتیجه این بود

m@ubuntu:~/Desktop$ sudo dpkg -i hsfmodem_*.deb
(Reading database ... 97411 files and directories currently installed.)
Preparing to replace hsfmodem 7.60.00.06oem (using hsfmodem_7.60.00.06oem_i386.deb) ...

************************************************************************
*
* The update-modules command is deprecated and should not be used!
*
************************************************************************

Unpacking replacement hsfmodem ...
Setting up hsfmodem (7.60.00.06oem) ...
Conexant HSF softmodem driver, version 7.60.00.06oem

If you need assistance or more information, please go to:
http://www.linuxant.com/

When reporting a problem for the first time, please send
us the file generated by "hsfconfig --dumpdiag".

No pre-built modules for: Ubuntu-8.04 linux-2.6.24-16-generic i686-SMP

Trying to automatically build the driver modules...
(this requires a C compiler and proper kernel sources to be installed)

Where is the linux source build directory that matches your running kernel?
[/lib/modules/2.6.24-16-generic/build] sudo hsfconfig

WARNING: missing file sudo hsfconfig/include/linux/autoconf.h
The cause of this is usually a missing or unconfigured
kernel source tree (and sometimes an incorrect directory or symbolic link).

First, ensure that the proper kernel source and compiler packages
from your distribution vendor and/or the community are installed.

The Linux kernel can then be reconfigured by running "make menuconfig"
under the kernel source directory (usually /usr/src/linux).

Verify that the proper options for your system are selected.

Then compile and install your new kernel (for more information about
this procedure, see the README file under the kernel source directory),
reboot the system using the new kernel, and re-run "hsfconfig".

m@ubuntu:~/Desktop$


مودم من شناسایی یا بهتره بگم نصب نشد
حالا تکلیف؟
« آخرین ویرایش: 29 تیر 1387، 01:37 ق‌ظ توسط sMoHseN »

آفلاین Manwe

  • Full Member
  • *
  • ارسال: 234
پاسخ به: عدم شناسایی یا نصب؟!
« پاسخ #1 : 28 تیر 1387، 04:45 ب‌ظ »
من ده صفحه این انجمن روخوندم
ویکی روهم خوندم و .....
اما مشکل من
این نتیجه اسکن مودمه
Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.24-16-generic
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686, 
Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008
 scanModem update of:  2008_07_12

 There are no blacklisted modem drivers in /etc/modprobe*  files
USB modems not recognized

For candidate card in slot 02:09.0, firmware information and bootup diagnostics are:
 PCI slot PCI ID SubsystemID Name
 ---------- --------- --------- --------------
 02:09.0 14f1:2f30 14f1:2075 Communication controller: Conexant HSF 56k Data/Fax Modem

 Modem interrupt assignment and sharing:
  4:          2   IO-APIC-edge   
 --- Bootup diagnostics for card in PCI slot 02:09.0 ----

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive diagnostics for card in bus 02:09.0:
Modem chipset  detected on
NAME="Communication controller: Conexant HSF 56k Data/Fax Modem "
CLASS=0780
PCIDEV=14f1:2f30
SUBSYS=14f1:2075
IRQ=4
IDENT=hsfmodem

 For candidate modem in:  02:09.0
   0780 Communication controller: [color=red][b]Conexant HSF 56k Data/Fax Modem [/b][/color]
      Primary device ID:  14f1:2f30
 Support type needed or chipset: hsfmodem
 


For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt

 From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
 download hsfmodem-7.68.00.07full_k2.6.24_16_generic_ubuntu_i386.deb.zip
 Under Linux unpack with:
 $ unzip hsfmodem*.zip
 Then install with:
 $ sudo dpkg -i hsfmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details.
 
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.2.3
             and the compiler used in kernel assembly: 4.2.3


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.2
   linuc_headers base folder /lib/modules/2.6.24-16-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are n. The also required headers of package libc6 are commonly installed by default.
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 23:27 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0: 
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

[left][/left]


یعنی مدلش Conexant HSF 56k Data/Fax Modem

خوب من طبق راهنمایی ویکی فایل مربوطه رو گرفتم هرچند واسه ابونتو من نبود ماله من 8.04

و نتیجه این بود

m@ubuntu:~/Desktop$ sudo dpkg -i hsfmodem_*.deb
(Reading database ... 97411 files and directories currently installed.)
Preparing to replace hsfmodem 7.60.00.06oem (using hsfmodem_7.60.00.06oem_i386.deb) ...

************************************************************************
*
* The update-modules command is deprecated and should not be used!
*
************************************************************************

Unpacking replacement hsfmodem ...
Setting up hsfmodem (7.60.00.06oem) ...
Conexant HSF softmodem driver, version 7.60.00.06oem

If you need assistance or more information, please go to:
http://www.linuxant.com/

When reporting a problem for the first time, please send
us the file generated by "hsfconfig --dumpdiag".

No pre-built modules for: Ubuntu-8.04 linux-2.6.24-16-generic i686-SMP

Trying to automatically build the driver modules...
(this requires a C compiler and proper kernel sources to be installed)

Where is the linux source build directory that matches your running kernel?
[/lib/modules/2.6.24-16-generic/build] sudo hsfconfig

WARNING: missing file sudo hsfconfig/include/linux/autoconf.h
The cause of this is usually a missing or unconfigured
kernel source tree (and sometimes an incorrect directory or symbolic link).

First, ensure that the proper kernel source and compiler packages
from your distribution vendor and/or the community are installed.

The Linux kernel can then be reconfigured by running "make menuconfig"
under the kernel source directory (usually /usr/src/linux).

Verify that the proper options for your system are selected.

Then compile and install your new kernel (for more information about
this procedure, see the README file under the kernel source directory),
reboot the system using the new kernel, and re-run "hsfconfig".

m@ubuntu:~/Desktop$


مودم من شناسایی یا بهتره بگم نصب نشد
حالا تکلیف؟
والا حقیقتشو بخواهی من مودم بیل میرم ولی این رو امتحان کن ، بعد دوباره نصب کن برنامتو:
sudo ln -s /usr/src/linux-headers-2.6.24-16-generic/include/linux/autoconf.h /lib/modules/2.6.24-16-generic/buildانشالله که درست میشی نازنین :)

در ضمن نازنین من به این خط مشکوکم
نقل‌قول
Where is the linux source build directory that matches your running kernel?
[/lib/modules/2.6.24-16-generic/build] sudo hsfconfig
از شما آدرس سورس کرنلت رو میخواد و دیفالتش غلطه شما یک کاری کن
sudo apt-get install build-essentialبعدش اونجا به جای اون آدرس کذایی این آدرس رو بده
/usr/src/linux-headers-2.6.24-16-generic/

من الله توفیق
« آخرین ویرایش: 28 تیر 1387، 04:47 ب‌ظ توسط Manwe »
. - .
         \ v /
       \ \   / /
     \ (       ) /
       ^^.^^

آفلاین Behdad0160

  • Newbie
  • *
  • ارسال: 17
پاسخ به: عدم شناسایی یا نصب؟!
« پاسخ #2 : 28 تیر 1387، 05:47 ب‌ظ »
دوست من مودم تو از نوع HCF هستش برای دانلود درایورش به این سایت مراجعه کن  http://www.linuxant.com/drivers/hcf/full/downloads.php
« آخرین ویرایش: 28 تیر 1387، 05:49 ب‌ظ توسط Behdad0160 »

آفلاین Behdad0160

  • Newbie
  • *
  • ارسال: 17
پاسخ به: عدم شناسایی یا نصب؟!
« پاسخ #3 : 28 تیر 1387، 05:52 ب‌ظ »
دوست من شما این درایورو که برات پیدا کردم دانلود و بعد نصب کن. حتما درست میشه:

http://www.linuxant.com/drivers/hcf/full/archive/hcfpcimodem-1.16full/hcfpcimodem_1.16full_k2.6.24_16_generic_ubuntu_i386.deb.zip

آفلاین sMoHseN

  • Jr. Member
  • *
  • ارسال: 25
پاسخ به: پاسخ به: عدم شناسایی یا نصب؟!
« پاسخ #4 : 28 تیر 1387، 06:22 ب‌ظ »


والا حقیقتشو بخواهی من مودم بیل میرم ولی این رو امتحان کن ، بعد دوباره نصب کن برنامتو:
sudo ln -s /usr/src/linux-headers-2.6.24-16-generic/include/linux/autoconf.h /lib/modules/2.6.24-16-generic/buildانشالله که درست میشی نازنین :)

در ضمن نازنین من به این خط مشکوکم
[Where is the linux source build directory that matches your running kernel?
[/lib/modules/2.6.24-16-generic/build] sudo hsfconfig
]
از شما آدرس سورس کرنلت رو میخواد و دیفالتش غلطه شما یک کاری کن
sudo apt-get install build-essentialبعدش اونجا به جای اون آدرس کذایی این آدرس رو بده
/usr/src/linux-headers-2.6.24-16-generic/

من الله توفیق


اینکارو هم انجام دادم فایده نداشت
اون وسطا ایراد از دایرکتوری گفت و اینکه ممکنه کانفیگ نشده باشه :(

آفلاین sMoHseN

  • Jr. Member
  • *
  • ارسال: 25
پاسخ به: عدم شناسایی یا نصب؟!
« پاسخ #5 : 28 تیر 1387، 06:27 ب‌ظ »
دوست من شما این درایورو که برات پیدا کردم دانلود و بعد نصب کن. حتما درست میشه:

http://www.linuxant.com/drivers/hcf/full/archive/hcfpcimodem-1.16full/hcfpcimodem_1.16full_k2.6.24_16_generic_ubuntu_i386.deb.zip
ممنون از توجهت و تشکر بابت پیگیری
اما یه نکته ...مگهتو تست مودم من نگفته که hsf ?
گذشته از اون من اینو هم امتحان کردم
اما طبق انتظار نتیجه این بود که
no device detectet for hcf ....
البته ازاونجا که من با دوبار کلیک نصب کردم امکان کپی گرفتن ازش نبود
اما نتیجه نهایی همین بود
یه مشکل عمده اینه که مجبورم واسه گرفتن توضیحات شما با ویندوز بیام  بالا و برای اعمال تغییرات ریستارت کنم و با لینوکس
این کارو امروز صد بار انجام دادم
اگه بشه زودتر درست بشه و از شر ویندوز خلاص بشم خیلی عالی میشه 8)

آفلاین sMoHseN

  • Jr. Member
  • *
  • ارسال: 25
پاسخ به: عدم شناسایی یا نصب؟!
« پاسخ #6 : 29 تیر 1387، 01:26 ق‌ظ »
مشکل حل شد
پورت مودم رو درست نزده بودم

آفلاین amirHP

  • Jr. Member
  • *
  • ارسال: 75
  • جنسیت : پسر
    • binazir
پاسخ به: عدم شناسایی یا نصب؟!(حل شد.)
« پاسخ #7 : 29 تیر 1387، 07:15 ق‌ظ »
سلام  :'( :'( :'( :'( :'( :'( :'(
حال سر و کله زدن با یه تازه کار دیگه رو دارین ؟ من برنامه ی اسکن مودم را اجرا کردم . مودم من از نوع alsa است . راهنمای نصب رایو رو خوندم و پکیج sl-modem-daemon را از اینترنت دریافت و نصب کردم . اما هر کاری می کنم . میگه مودم نصب نشده .
برای این کار از دستور :lspci | grep modemیا کد wvdial استفاده می کنم اما اولی جواب نداره و دومی میگه no detect ! و آیا برنامه ای برای مودم در حال اجراست ؟ لطفا راهنمایی کنید .
در ضمن بگم که من قبل از این درایو اینتل رو هم نصب کردم .امیدوارم مشکل به خاطر نصب دو درایو نباشه . :'( :'( :'( :'( :'( :'( :'( :'( :'( :'( :'(
تا یادم نرفته بگم مورد دیگه ای که بهش مشکوکم اینه که اوبونتو من مدل i686 اما sl-modem-daemon بر پایه ی i636 (؟) بود ؟ چون مدل دیگه ای نداشت .