سلام
من تازه کارم اگه میشه کمکم کنی کارت تی ویم رو راه بندازم ممنون میشم
این خروجی lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 5
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 6
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8500 GT (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
04:00.0 IDE interface: JMicron Technologies, Inc. JMB368 IDE controller
05:01.0 Communication controller: Conexant Systems, Inc. HSF 56k HSFi Modem (rev 01)
05:02.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
این هم خروجی dmesg
[ 0.416219] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.416223] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.416228] pci 0000:00:1f.2: reg 20 io port: [0xff90-0xff9f]
[ 0.416234] pci 0000:00:1f.2: reg 24 io port: [0xffa0-0xffaf]
[ 0.416265] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf9fff400-0xf9fff4ff]
[ 0.416277] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.416314] pci 0000:00:1f.5: reg 10 io port: [0x9c00-0x9c07]
[ 0.416319] pci 0000:00:1f.5: reg 14 io port: [0x9880-0x9883]
[ 0.416325] pci 0000:00:1f.5: reg 18 io port: [0x9800-0x9807]
[ 0.416329] pci 0000:00:1f.5: reg 1c io port: [0x9480-0x9483]
[ 0.416334] pci 0000:00:1f.5: reg 20 io port: [0x9400-0x940f]
[ 0.416339] pci 0000:00:1f.5: reg 24 io port: [0x9080-0x908f]
[ 0.416381] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.416390] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xdfffffff]
[ 0.416398] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
[ 0.416403] pci 0000:01:00.0: reg 24 io port: [0xbc00-0xbc7f]
[ 0.416408] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe9e0000-0xfe9fffff]
[ 0.416450] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
[ 0.416453] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfe9fffff]
[ 0.416457] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff]
[ 0.416539] pci 0000:03:00.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.416558] pci 0000:03:00.0: reg 18 64bit mmio: [0xfeaff000-0xfeafffff]
[ 0.416572] pci 0000:03:00.0: reg 20 64bit mmio: [0xf8ff0000-0xf8ffffff]
[ 0.416579] pci 0000:03:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff]
[ 0.416589] pci 0000:03:00.0: supports D1 D2
[ 0.416591] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.416595] pci 0000:03:00.0: PME# disabled
[ 0.416644] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
[ 0.416648] pci 0000:00:1c.4: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.416653] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff]
[ 0.416706] pci 0000:04:00.0: reg 10 io port: [0xdc00-0xdc07]
[ 0.416714] pci 0000:04:00.0: reg 14 io port: [0xd880-0xd883]
[ 0.416723] pci 0000:04:00.0: reg 18 io port: [0xd800-0xd807]
[ 0.416731] pci 0000:04:00.0: reg 1c io port: [0xd480-0xd483]
[ 0.416739] pci 0000:04:00.0: reg 20 io port: [0xd400-0xd40f]
[ 0.416806] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff]
[ 0.416842] pci 0000:05:01.0: reg 10 32bit mmio: [0xfebf0000-0xfebfffff]
[ 0.416848] pci 0000:05:01.0: reg 14 io port: [0xec00-0xec07]
[ 0.416878] pci 0000:05:01.0: PME# supported from D3hot D3cold
[ 0.416881] pci 0000:05:01.0: PME# disabled
[ 0.416912] pci 0000:05:02.0: reg 10 32bit mmio: [0xfebefc00-0xfebeffff]
[ 0.416947] pci 0000:05:02.0: supports D1 D2
[ 0.416987] pci 0000:00:1e.0: transparent bridge
[ 0.416990] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.416993] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.417015] bus 00 -> node 0
[ 0.417020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.417226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.417394] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.417481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.417564] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.420100] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.420207] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.420312] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.420417] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.420523] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.420628] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.420732] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.420837] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.420942] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - F6, should be E9 [20080926]
[ 0.420961] ACPI: WMI: Mapper loaded
[ 0.420989] SCSI subsystem initialized
[ 0.420989] libata version 3.00 loaded.
[ 0.420989] usbcore: registered new interface driver usbfs
[ 0.420989] usbcore: registered new interface driver hub
[ 0.420989] usbcore: registered new device driver usb
[ 0.420989] PCI: Using ACPI for IRQ routing
[ 0.428013] Bluetooth: Core ver 2.13
[ 0.428036] NET: Registered protocol family 31
[ 0.428036] Bluetooth: HCI device and connection manager initialized
[ 0.428036] Bluetooth: HCI socket layer initialized
[ 0.428036] NET: Registered protocol family 8
[ 0.428036] NET: Registered protocol family 20
[ 0.428036] NetLabel: Initializing
[ 0.428036] NetLabel: domain hash size = 128
[ 0.428036] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.428046] NetLabel: unlabeled traffic allowed by default
[ 0.428095] AppArmor: AppArmor Filesystem Enabled
[ 0.432015] pnp: PnP ACPI init
[ 0.432027] ACPI: bus type pnp registered
[ 0.435485] pnp: PnP ACPI: found 14 devices
[ 0.435487] ACPI: ACPI bus type pnp unregistered
[ 0.435490] PnPBIOS: Disabled by ACPI PNP
[ 0.435497] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.435499] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
[ 0.435506] system 00:09: ioport range 0xa00-0xadf has been reserved
[ 0.435508] system 00:09: ioport range 0xae0-0xaef has been reserved
[ 0.435512] system 00:0a: ioport range 0x4d0-0x4ff has been reserved
[ 0.435514] system 00:0a: ioport range 0x800-0x87f has been reserved
[ 0.435516] system 00:0a: ioport range 0x480-0x4cf has been reserved
[ 0.435518] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.435520] system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.435522] system 00:0a: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 0.435526] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.435528] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.435532] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.435537] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.435539] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 0.435541] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.435543] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.435545] system 00:0d: iomem range 0xfed90000-0xffffffff could not be reserved
[ 0.470197] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.470199] pci 0000:00:01.0: IO window: 0xb000-0xbfff
[ 0.470202] pci 0000:00:01.0: MEM window: 0xfa000000-0xfe9fffff
[ 0.470205] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff
[ 0.470209] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.470210] pci 0000:00:1c.0: IO window: disabled
[ 0.470214] pci 0000:00:1c.0: MEM window: disabled
[ 0.470217] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.470222] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.470225] pci 0000:00:1c.4: IO window: 0xc000-0xcfff
[ 0.470229] pci 0000:00:1c.4: MEM window: 0xfea00000-0xfeafffff
[ 0.470232] pci 0000:00:1c.4: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff
[ 0.470237] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
[ 0.470240] pci 0000:00:1c.5: IO window: 0xd000-0xdfff
[ 0.470243] pci 0000:00:1c.5: MEM window: disabled
[ 0.470246] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.470252] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.470254] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.470258] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.470261] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.470271] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.470274] pci 0000:00:01.0: setting latency timer to 64
[ 0.470280] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.470283] pci 0000:00:1c.0: setting latency timer to 64
[ 0.470289] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.470292] pci 0000:00:1c.4: setting latency timer to 64
[ 0.470299] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.470302] pci 0000:00:1c.5: setting latency timer to 64
[ 0.470307] pci 0000:00:1e.0: setting latency timer to 64
[ 0.470310] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.470312] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.470313] bus: 01 index 0 io port: [0xb000-0xbfff]
[ 0.470315] bus: 01 index 1 mmio: [0xfa000000-0xfe9fffff]
[ 0.470317] bus: 01 index 2 mmio: [0xc0000000-0xdfffffff]
[ 0.470318] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.470319] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.470321] bus: 02 index 1 mmio: [0x0-0x0]
[ 0.470322] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.470323] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.470325] bus: 03 index 0 io port: [0xc000-0xcfff]
[ 0.470326] bus: 03 index 1 mmio: [0xfea00000-0xfeafffff]
[ 0.470328] bus: 03 index 2 mmio: [0xf8f00000-0xf8ffffff]
[ 0.470329] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.470331] bus: 04 index 0 io port: [0xd000-0xdfff]
[ 0.470332] bus: 04 index 1 mmio: [0x0-0x0]
[ 0.470333] bus: 04 index 2 mmio: [0x0-0x0]
[ 0.470334] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.470336] bus: 05 index 0 io port: [0xe000-0xefff]
[ 0.470337] bus: 05 index 1 mmio: [0xfeb00000-0xfebfffff]
[ 0.470339] bus: 05 index 2 mmio: [0x0-0x0]
[ 0.470340] bus: 05 index 3 io port: [0x00-0xffff]
[ 0.470342] bus: 05 index 4 mmio: [0x000000-0xffffffff]
[ 0.470348] NET: Registered protocol family 2
[ 0.484085] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.484266] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.484547] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.484705] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.484706] TCP reno registered
[ 0.492100] NET: Registered protocol family 1
[ 0.492194] checking if image is initramfs... it is
[ 0.968549] Switched to high resolution mode on CPU 1
[ 0.972067] Switched to high resolution mode on CPU 0
[ 0.974189] Freeing initrd memory: 7365k freed
[ 0.974358] cpufreq: No nForce2 chipset.
[ 0.974467] audit: initializing netlink socket (disabled)
[ 0.974485] type=2000 audit(1250254638.972:1): initialized
[ 0.980235] highmem bounce pool size: 64 pages
[ 0.980239] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.981227] VFS: Disk quotas dquot_6.5.1
[ 0.981271] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.981728] fuse init (API version 7.10)
[ 0.981791] msgmni has been set to 1698
[ 0.981927] alg: No test for stdrng (krng)
[ 0.981935] io scheduler noop registered
[ 0.981936] io scheduler anticipatory registered
[ 0.981938] io scheduler deadline registered
[ 0.981948] io scheduler cfq registered (default)
[ 0.982078] pci 0000:01:00.0: Boot video device
[ 0.984905] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.984933] pcieport-driver 0000:00:01.0: found MSI capability
[ 0.984952] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 0.984959] pci_express 0000:00:01.0:pcie00: allocate port service
[ 0.984969] pci_express 0000:00:01.0:pcie03: allocate port service
[ 0.985006] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.985035] pcieport-driver 0000:00:1c.0: found MSI capability
[ 0.985055] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 0.985065] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 0.985074] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 0.985083] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 0.985128] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.985157] pcieport-driver 0000:00:1c.4: found MSI capability
[ 0.985177] pcieport-driver 0000:00:1c.4: irq 2301 for MSI/MSI-X
[ 0.985187] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 0.985196] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 0.985207] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 0.985252] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.985281] pcieport-driver 0000:00:1c.5: found MSI capability
[ 0.985301] pcieport-driver 0000:00:1c.5: irq 2300 for MSI/MSI-X
[ 0.985311] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 0.985320] pci_express 0000:00:1c.5:pcie02: allocate port service
[ 0.985329] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 0.985383] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.985814] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.985926] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.985928] ACPI: Power Button (FF) [PWRF]
[ 0.985969] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.985971] ACPI: Power Button (CM) [PWRB]
[ 0.986178] processor ACPI_CPU:00: registered as cooling_device0
[ 0.986204] processor ACPI_CPU:01: registered as cooling_device1
[ 0.988035] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.988239] ACPI: Thermal Zone [THRM] (48 C)
[ 0.988276] isapnp: Scanning for PnP cards...
[ 1.343874] isapnp: No Plug & Play device found
[ 1.352630] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.352713] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.352992] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.353602] brd: module loaded
[ 1.353833] loop: module loaded
[ 1.353878] Fixed MDIO Bus: probed
[ 1.353882] PPP generic driver version 2.4.2
[ 1.353923] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.353943] Driver 'sd' needs updating - please use bus_type methods
[ 1.353950] Driver 'sr' needs updating - please use bus_type methods
[ 1.354005] ata_piix 0000:00:1f.2: version 2.12
[ 1.354016] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.354019] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.354055] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.354109] scsi0 : ata_piix
[ 1.354165] scsi1 : ata_piix
[ 1.355239] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
[ 1.355243] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
[ 2.148068] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.148087] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.190241] ata1.00: ATA-8: STM3500418AS, CC34, max UDMA/133
[ 2.190245] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.190294] ata1.01: ATAPI: ATAPI iHAS322 8, 3L11, max UDMA/100
[ 2.246263] ata1.00: configured for UDMA/133
[ 2.260212] ata1.01: configured for UDMA/100
[ 2.910674] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 2.910682] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 2.910761] scsi 0:0:0:0: Direct-Access ATA STM3500418AS CC34 PQ: 0 ANSI: 5
[ 2.910828] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 2.910840] sd 0:0:0:0: [sda] Write Protect is off
[ 2.910842] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.910861] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.910906] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 2.910917] sd 0:0:0:0: [sda] Write Protect is off
[ 2.910919] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.910937] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.910939] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
[ 3.020195] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.020230] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.021402] scsi 0:0:1:0: CD-ROM ATAPI iHAS322 8 3L11 PQ: 0 ANSI: 5
[ 3.027306] sr0: scsi3-mmc drive: 16x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.027310] Uniform CD-ROM driver Revision: 3.20
[ 3.027401] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 3.027426] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 3.027440] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.027443] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 3.027473] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 3.027515] scsi2 : ata_piix
[ 3.027559] scsi3 : ata_piix
[ 3.028452] ata3: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 19
[ 3.028456] ata4: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 19
[ 3.354658] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.682658] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.682941] pata_jmicron 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.682965] pata_jmicron 0000:04:00.0: setting latency timer to 64
[ 3.683010] scsi4 : pata_jmicron
[ 3.683048] scsi5 : pata_jmicron
[ 3.683078] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 3.683080] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 3.992297] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.992312] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.992326] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.992329] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.992370] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.996265] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.996270] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.996281] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[ 4.012013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.012097] usb usb1: configuration #1 chosen from 1 choice
[ 4.012116] hub 1-0:1.0: USB hub found
[ 4.012122] hub 1-0:1.0: 6 ports detected
[ 4.012199] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.012206] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.012209] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.012240] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.016131] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.016136] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.016145] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[ 4.028013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.028087] usb usb2: configuration #1 chosen from 1 choice
[ 4.028105] hub 2-0:1.0: USB hub found
[ 4.028111] hub 2-0:1.0: 6 ports detected
[ 4.028181] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.028193] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.028208] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.028212] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.028215] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.028248] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.028273] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ac00
[ 4.028326] usb usb3: configuration #1 chosen from 1 choice
[ 4.028345] hub 3-0:1.0: USB hub found
[ 4.028350] hub 3-0:1.0: 2 ports detected
[ 4.028410] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.028414] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.028416] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.028448] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.028472] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 4.028527] usb usb4: configuration #1 chosen from 1 choice
[ 4.028546] hub 4-0:1.0: USB hub found
[ 4.028552] hub 4-0:1.0: 2 ports detected
[ 4.028614] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 4.028618] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 4.028620] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 4.028655] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 4.028673] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000a800
[ 4.028725] usb usb5: configuration #1 chosen from 1 choice
[ 4.028743] hub 5-0:1.0: USB hub found
[ 4.028750] hub 5-0:1.0: 2 ports detected
[ 4.028810] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.028814] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.028816] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.028848] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 4.028867] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a480
[ 4.028920] usb usb6: configuration #1 chosen from 1 choice
[ 4.028938] hub 6-0:1.0: USB hub found
[ 4.028943] hub 6-0:1.0: 2 ports detected
[ 4.029001] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.029005] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.029008] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.029039] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 4.029058] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 4.029109] usb usb7: configuration #1 chosen from 1 choice
[ 4.029127] hub 7-0:1.0: USB hub found
[ 4.029131] hub 7-0:1.0: 2 ports detected
[ 4.029195] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.029199] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.029202] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.029231] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 4.029249] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a080
[ 4.029300] usb usb8: configuration #1 chosen from 1 choice
[ 4.029320] hub 8-0:1.0: USB hub found
[ 4.029326] hub 8-0:1.0: 2 ports detected
[ 4.029419] usbcore: registered new interface driver libusual
[ 4.029441] usbcore: registered new interface driver usbserial
[ 4.029449] USB Serial support registered for generic
[ 4.029463] usbcore: registered new interface driver usbserial_generic
[ 4.029464] usbserial: USB Serial Driver core
[ 4.029505] PNP: No PS/2 controller found. Probing ports directly.
[ 4.029782] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.029786] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.032557] mice: PS/2 mouse device common for all mice
[ 4.044586] rtc_cmos 00:03: RTC can wake from S4
[ 4.044610] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.044630] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 4.044673] device-mapper: uevent: version 1.0.3
[ 4.044737] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 4.044788] device-mapper: multipath: version 1.0.5 loaded
[ 4.044790] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.044844] EISA: Probing bus 0 at eisa.0
[ 4.044868] EISA: Detected 0 cards.
[ 4.044902] cpuidle: using governor ladder
[ 4.044903] cpuidle: using governor menu
[ 4.045281] TCP cubic registered
[ 4.045355] NET: Registered protocol family 10
[ 4.045678] lo: Disabled Privacy Extensions
[ 4.045923] NET: Registered protocol family 17
[ 4.045935] Bluetooth: L2CAP ver 2.11
[ 4.045937] Bluetooth: L2CAP socket layer initialized
[ 4.045939] Bluetooth: SCO (Voice Link) ver 0.6
[ 4.045940] Bluetooth: SCO socket layer initialized
[ 4.045961] Bluetooth: RFCOMM socket layer initialized
[ 4.045965] Bluetooth: RFCOMM TTY layer initialized
[ 4.045966] Bluetooth: RFCOMM ver 1.10
[ 4.046006] Using IPI No-Shortcut mode
[ 4.046057] registered taskstats version 1
[ 4.046159] Magic number: 5:777:986
[ 4.046213] rtc_cmos 00:03: setting system clock to 2009-08-14 12:57:22 UTC (1250254642)
[ 4.046216] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.046217] EDD information not available.
[ 4.046422] Freeing unused kernel memory: 532k freed
[ 4.046511] Write protecting the kernel text: 4128k
[ 4.046544] Write protecting the kernel read-only data: 1532k
[ 4.095591] vesafb: framebuffer at 0xfb000000, mapped to 0xf7d00000, using 6144k, total 14336k
[ 4.095593] vesafb: mode is 1024x768x32, linelength=4096, pages=1
[ 4.095595] vesafb: protected mode interface info at c000:af30
[ 4.095597] vesafb: pmi: set display start = c00caf93, set palette = c00cafee
[ 4.095598] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 4.095607] vesafb: scrolling: redraw
[ 4.095609] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 4.095672] Console: switching to colour frame buffer device 128x48
[ 4.127252] fb0: VESA VGA frame buffer device
[ 4.264102] Floppy drive(s): fd0 is 1.44M
[ 4.283653] FDC 0 is a post-1991 82077
[ 4.297612] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.297627] r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.297643] r8169 0000:03:00.0: setting latency timer to 64
[ 4.297739] r8169 0000:03:00.0: irq 2299 for MSI/MSI-X
[ 4.298223] eth0: RTL8168c/8111c at 0xf7c58000, 00:e0:4d:a4:cb:9d, XID 3c4000c0 IRQ 2299
[ 4.708025] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 4.863548] usb 3-2: configuration #1 chosen from 1 choice
[ 5.104018] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 5.355630] usb 4-1: configuration #1 chosen from 1 choice
[ 5.365305] usbcore: registered new interface driver hiddev
[ 5.408761] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input3
[ 5.408877] generic-usb 0003:1241:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1a.1-1/input0
[ 5.495632] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input4
[ 5.497002] generic-usb 0003:1241:1603.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1a.1-1/input1
[ 5.497015] usbcore: registered new interface driver usbhid
[ 5.497018] usbhid: v2.6:USB HID core driver
[ 5.600020] usb 4-2: new low speed USB device using uhci_hcd and address 3
[ 5.768644] usb 4-2: configuration #1 chosen from 1 choice
[ 5.786781] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input5
[ 5.788867] generic-usb 0003:192F:0416.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-2/input0
[ 9.807600] kjournald starting. Commit interval 5 seconds
[ 9.807607] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.125496] udev: starting version 141
[ 13.240182] parport_pc 00:08: reported by Plug and Play ACPI
[ 13.240224] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 13.256834] Linux agpgart interface v0.103
[ 13.263859] iTCO_vendor_support: vendor-support=0
[ 13.863996] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 13.864220] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
[ 13.864288] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.036723] nvidia: module license 'NVIDIA' taints kernel.
[ 14.288609] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.288616] nvidia 0000:01:00.0: setting latency timer to 64
[ 14.289431] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 14.569642] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 14.569730] usbcore: registered new interface driver btusb
[ 14.603399] ppdev: user-space parallel port driver
[ 14.610197] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 14.654174] Linux video capture interface: v2.00
[ 14.696623] saa7134: `3;tuner=2' invalid for parameter `card'
[ 14.706683] saa7134: `3;tuner=2' invalid for parameter `card'
[ 14.767836] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.767905] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.797916] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 14.925443] lp0: using parport0 (interrupt-driven).
[ 15.312562] EXT3 FS on sda9, internal journal
[ 15.725132] type=1505 audit(1250238454.178:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2185
[ 15.759184] type=1505 audit(1250238454.210:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2189
[ 15.759264] type=1505 audit(1250238454.210:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2189
[ 15.759296] type=1505 audit(1250238454.210:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2189
[ 15.759324] type=1505 audit(1250238454.210:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2189
[ 15.854099] type=1505 audit(1250238454.306:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2194
[ 15.854238] type=1505 audit(1250238454.306:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2194
[ 15.875111] type=1505 audit(1250238454.326:9): operation="profile_load" name="/usr/sbin/mysqld-akonadi" name2="default" pid=2198
[ 15.894312] type=1505 audit(1250238454.346:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2202
[ 18.823973] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.823976] Bluetooth: BNEP filters: protocol multicast
[ 18.830899] Bridge firewalling registered
[ 23.546652] r8169: eth0: link up
[ 23.546657] r8169: eth0: link up
[ 33.319734] UDF-fs: No VRS found
[ 33.404034] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 33.553876] ISOFS: changing to secondary root
[ 34.236012] eth0: no IPv6 routers present
[ 96.462836] NET: Registered protocol family 24
این کاری رو هم که شما گفتید کردم این ارور رو میده
ERROR: Module saa7134 does not exist in /proc/modulesچی کار باید بکنم؟
موضوع: راهنمای بهره برداری از کارت تلویزیون انالوگ ! (دفعات بازدید: 9643 بار)
