قسمت سوم اینه
hamid@hamid67:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-15-generic (buildd@komainu) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #15-Ubuntu SMP Thu Apr 16 23:32:37 UTC 2015 (Ubuntu 3.19.0-15.15-generic 3.19.3)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-15-generic root=UUID=a89d4c3f-159f-4470-b007-4e69eee8eac3 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000006fdaffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006fdb0000-0x00000000711affff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000711b0000-0x0000000075abefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000075abf000-0x0000000075ebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000075ebf000-0x0000000075fbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000075fbf000-0x0000000075ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000075fff000-0x0000000075ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000076000000-0x000000007e9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Acer Aspire E1-531/EA50_HC_HR, BIOS V2.14 02/19/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x100600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 076000000 mask FFE000000 uncachable
[ 0.000000] 2 base 078000000 mask FF8000000 uncachable
[ 0.000000] 3 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 4 base 100000000 mask FFF800000 write-back
[ 0.000000] 5 base 100600000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: last_pfn = 0x76000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100400000-0x1005fffff]
[ 0.000000] [mem 0x100400000-0x1005fffff] page 2M
[ 0.000000] BRK [0x01fe8000, 0x01fe8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1003fffff]
[ 0.000000] [mem 0x100000000-0x1003fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x60000000-0x6fdaffff]
[ 0.000000] [mem 0x60000000-0x6fbfffff] page 2M
[ 0.000000] [mem 0x6fc00000-0x6fdaffff] page 4k
[ 0.000000] BRK [0x01fe9000, 0x01fe9fff] PGTABLE
[ 0.000000] BRK [0x01fea000, 0x01feafff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x711b0000-0x75abefff]
[ 0.000000] [mem 0x711b0000-0x711fffff] page 4k
[ 0.000000] [mem 0x71200000-0x759fffff] page 2M
[ 0.000000] [mem 0x75a00000-0x75abefff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x75fff000-0x75ffffff]
[ 0.000000] [mem 0x75fff000-0x75ffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x40200000-0x5fffffff]
[ 0.000000] [mem 0x40200000-0x5fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x35842000-0x36c18fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x0000000075FFE210 0000A4 (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 0x0000000075FFB000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DSDT 0x0000000075FEC000 00BB9E (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FACS 0x0000000075FBA000 000040
[ 0.000000] ACPI: UEFI 0x0000000075FFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASF! 0x0000000075FFC000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: HPET 0x0000000075FFA000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC 0x0000000075FF9000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 0x0000000075FF8000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SLIC 0x0000000075FEB000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x0000000075FEA000 0006FE (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: BOOT 0x0000000075FE8000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x0000000075FE7000 000C0A (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x0000000075FE6000 000696 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: ASPT 0x0000000075FE3000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DBGP 0x0000000075FE2000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: FPDT 0x0000000075FE0000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x0000000075FDE000 000968 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x0000000075FDD000 000A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001005fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1005f8000-0x1005fcfff]
[ 0.000000] [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880073600000-ffff8800755fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1005fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0x6fdaffff]
[ 0.000000] node 0: [mem 0x711b0000-0x75abefff]
[ 0.000000] node 0: [mem 0x75fff000-0x75ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x1005fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x1005fffff]
[ 0.000000] On node 0 totalpages: 477276
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 156 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7371 pages used for memmap
[ 0.000000] DMA32 zone: 471744 pages, LIFO batch:31
[ 0.000000] Normal zone: 24 pages used for memmap
[ 0.000000] Normal zone: 1536 pages, LIFO batch:0
[ 0.000000] Reserving Intel graphics stolen memory at 0x76a00000-0x7e9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6fdb0000-0x711affff]
[ 0.000000] PM: Registered nosave memory: [mem 0x75abf000-0x75ebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x75ebf000-0x75fbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x75fbf000-0x75ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x76000000-0x7e9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ea00000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffc7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc80000-0xffffffff]
[ 0.000000] e820: [mem 0x7ea00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff880100200000 s87040 r8192 d31744 u262144
[ 0.000000] pcpu-alloc: s87040 r8192 d31744 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 469661
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-15-generic root=UUID=a89d4c3f-159f-4470-b007-4e69eee8eac3 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1771768K/1909104K available (7993K kernel code, 1232K rwdata, 3752K rodata, 1408K init, 1300K bss, 137336K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:488 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2194.962 MHz processor
[ 0.000038] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.92 BogoMIPS (lpj=8779848)
[ 0.000041] pid_max: default: 32768 minimum: 301
[ 0.000047] ACPI: Core revision 20141107
[ 0.009056] ACPI: All ACPI Tables successfully acquired
[ 0.026310] Security Framework initialized
[ 0.026329] AppArmor: AppArmor initialized
[ 0.026330] Yama: becoming mindful.
[ 0.026535] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.027059] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.027305] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.027309] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.027536] Initializing cgroup subsys memory
[ 0.027543] Initializing cgroup subsys devices
[ 0.027546] Initializing cgroup subsys freezer
[ 0.027549] Initializing cgroup subsys net_cls
[ 0.027551] Initializing cgroup subsys blkio
[ 0.027553] Initializing cgroup subsys perf_event
[ 0.027556] Initializing cgroup subsys net_prio
[ 0.027558] Initializing cgroup subsys hugetlb
[ 0.027584] CPU: Physical Processor ID: 0
[ 0.027585] CPU: Processor Core ID: 0
[ 0.027590] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.027592] mce: CPU supports 7 MCE banks
[ 0.027605] CPU0: Thermal monitoring enabled (TM1)
[ 0.027615] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.027736] Freeing SMP alternatives memory: 32K (ffffffff81e96000 - ffffffff81e9e000)
[ 0.029262] ftrace: allocating 30078 entries in 118 pages
[ 0.045941] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.085667] smpboot: CPU0: Intel(R) Pentium(R) CPU B960 @ 2.20GHz (fam: 06, model: 2a, stepping: 07)
[ 0.085676] TSC deadline timer enabled
[ 0.085708] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.085730] ... version: 3
[ 0.085732] ... bit width: 48
[ 0.085733] ... generic registers: 8
[ 0.085734] ... value mask: 0000ffffffffffff
[ 0.085735] ... max period: 0000ffffffffffff
[ 0.085736] ... fixed-purpose events: 3
[ 0.085737] ... event mask: 00000007000000ff
[ 0.086653] x86: Booting SMP configuration:
[ 0.086656] .... node #0, CPUs: #1
[ 0.099736] x86: Booted up 1 node, 2 CPUs
[ 0.099739] smpboot: Total of 2 processors activated (8779.84 BogoMIPS)
[ 0.099807] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.101182] devtmpfs: initialized
[ 0.103487] evm: security.selinux
[ 0.103489] evm: security.SMACK64
[ 0.103490] evm: security.SMACK64EXEC
[ 0.103491] evm: security.SMACK64TRANSMUTE
[ 0.103492] evm: security.SMACK64MMAP
[ 0.103493] evm: security.ima
[ 0.103494] evm: security.capability
[ 0.103557] PM: Registering ACPI NVS region [mem 0x75ebf000-0x75fbefff] (1048576 bytes)
[ 0.103732] pinctrl core: initialized pinctrl subsystem
[ 0.103852] RTC time: 17:17:58, date: 07/22/15
[ 0.103966] NET: Registered protocol family 16
[ 0.109759] cpuidle: using governor ladder
[ 0.115787] cpuidle: using governor menu
[ 0.115931] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.115933] ACPI: bus type PCI registered
[ 0.115935] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.116024] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.116027] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.116117] PCI: Using configuration type 1 for base access
[ 0.116238] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.116239] mtrr: probably your BIOS does not setup all CPUs.
[ 0.116240] mtrr: corrected configuration.
[ 0.118281] ACPI: Added _OSI(Module Device)
[ 0.118283] ACPI: Added _OSI(Processor Device)
[ 0.118284] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.118285] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.121397] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.124254] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.124592] ACPI: Dynamic OEM Table Load:
[ 0.124603] ACPI: SSDT 0xFFFF88007331B000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.125227] ACPI: Dynamic OEM Table Load:
[ 0.125234] ACPI: SSDT 0xFFFF880100516400 000303 (v01 PmRef ApIst 00003000 INTL 20120913)
[ 0.125784] ACPI: Dynamic OEM Table Load:
[ 0.125791] ACPI: SSDT 0xFFFF8800732C1800 000119 (v01 PmRef ApCst 00003000 INTL 20120913)
[ 0.126512] ACPI: Interpreter enabled
[ 0.126519] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.126523] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.126538] ACPI: (supports S0 S3 S4 S5)
[ 0.126540] ACPI: Using IOAPIC for interrupt routing
[ 0.126568] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.274421] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.274428] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.274493] \_SB_.PCI0:_OSC invalid UUID
[ 0.274494] _OSC request data:1 1f 0
[ 0.274498] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.275194] PCI host bridge to bus 0000:00
[ 0.275197] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.275199] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.275201] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.275203] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.275204] pci_bus 0000:00: root bus resource [mem 0x7ea00000-0xfeafffff]
[ 0.275213] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.275311] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
[ 0.275323] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff 64bit]
[ 0.275329] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.275334] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
[ 0.275450] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.275475] pci 0000:00:16.0: reg 0x10: [mem 0x90604000-0x9060400f 64bit]
[ 0.275557] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.275655] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.275677] pci 0000:00:1a.0: reg 0x10: [mem 0x90608000-0x906083ff]
[ 0.275773] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.275832] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.275880] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.275899] pci 0000:00:1b.0: reg 0x10: [mem 0x90600000-0x90603fff 64bit]
[ 0.275979] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.276027] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.276069] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.276159] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.276207] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.276249] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.276336] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.276384] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.276436] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.276459] pci 0000:00:1d.0: reg 0x10: [mem 0x90607000-0x906073ff]
[ 0.276554] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.276614] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.276659] pci 0000:00:1f.0: [8086:1e5e] type 00 class 0x060100
[ 0.276842] pci 0000:00:1f.2: [8086:1e01] type 00 class 0x01018f
[ 0.276859] pci 0000:00:1f.2: reg 0x10: [io 0x20b8-0x20bf]
[ 0.276868] pci 0000:00:1f.2: reg 0x14: [io 0x20cc-0x20cf]
[ 0.276876] pci 0000:00:1f.2: reg 0x18: [io 0x20b0-0x20b7]
[ 0.276885] pci 0000:00:1f.2: reg 0x1c: [io 0x20c8-0x20cb]
[ 0.276894] pci 0000:00:1f.2: reg 0x20: [io 0x2090-0x209f]
[ 0.276902] pci 0000:00:1f.2: reg 0x24: [io 0x2080-0x208f]
[ 0.277009] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.277026] pci 0000:00:1f.3: reg 0x10: [mem 0x90605000-0x906050ff 64bit]
[ 0.277048] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f]
[ 0.277142] pci 0000:00:1f.5: [8086:1e09] type 00 class 0x010185
[ 0.277158] pci 0000:00:1f.5: reg 0x10: [io 0x20a8-0x20af]
[ 0.277167] pci 0000:00:1f.5: reg 0x14: [io 0x20c4-0x20c7]
[ 0.277176] pci 0000:00:1f.5: reg 0x18: [io 0x20a0-0x20a7]
[ 0.277184] pci 0000:00:1f.5: reg 0x1c: [io 0x20c0-0x20c3]
[ 0.277193] pci 0000:00:1f.5: reg 0x20: [io 0x2070-0x207f]
[ 0.277201] pci 0000:00:1f.5: reg 0x24: [io 0x2060-0x206f]
[ 0.277446] pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000
[ 0.277487] pci 0000:02:00.0: reg 0x10: [mem 0x90430000-0x9043ffff 64bit pref]
[ 0.277516] pci 0000:02:00.0: reg 0x18: [mem 0x90440000-0x9044ffff 64bit pref]
[ 0.277570] pci 0000:02:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
[ 0.277719] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.277769] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.277869] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
[ 0.277910] pci 0000:02:00.1: reg 0x10: [mem 0x90400000-0x9040ffff 64bit pref]
[ 0.278128] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 0.278264] pci 0000:02:00.2: [14e4:16be] type 00 class 0x088000
[ 0.278306] pci 0000:02:00.2: reg 0x10: [mem 0x90410000-0x9041ffff 64bit pref]
[ 0.278523] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
[ 0.278656] pci 0000:02:00.3: [14e4:16bf] type 00 class 0x088000
[ 0.278698] pci 0000:02:00.3: reg 0x10: [mem 0x90420000-0x9042ffff 64bit pref]
[ 0.278912] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold
[ 0.286156] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.286181] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x904fffff 64bit pref]
[ 0.286294] pci 0000:03:00.0: [168c:0034] type 00 class 0x028000
[ 0.286325] pci 0000:03:00.0: reg 0x10: [mem 0x90500000-0x9057ffff 64bit]
[ 0.286390] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.286481] pci 0000:03:00.0: supports D1 D2
[ 0.286482] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.286517] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.294098] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.294113] pci 0000:00:1c.1: bridge window [mem 0x90500000-0x905fffff]
[ 0.366560] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.366613] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.366663] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.366714] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.366763] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.366813] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.366864] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.366913] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.366992] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.367028] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.367145] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.367147] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.367150] vgaarb: loaded
[ 0.367152] vgaarb: bridge control possible 0000:00:02.0
[ 0.367422] SCSI subsystem initialized
[ 0.367475] libata version 3.00 loaded.
[ 0.367504] ACPI: bus type USB registered
[ 0.367523] usbcore: registered new interface driver usbfs
[ 0.367533] usbcore: registered new interface driver hub
[ 0.367546] usbcore: registered new device driver usb
[ 0.367681] PCI: Using ACPI for IRQ routing
[ 0.369296] PCI: pci_cache_line_size set to 64 bytes
[ 0.369434] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.369436] e820: reserve RAM buffer [mem 0x6fdb0000-0x6fffffff]
[ 0.369437] e820: reserve RAM buffer [mem 0x75abf000-0x77ffffff]
[ 0.369439] e820: reserve RAM buffer [mem 0x76000000-0x77ffffff]
[ 0.369440] e820: reserve RAM buffer [mem 0x100600000-0x103ffffff]
[ 0.369571] NetLabel: Initializing
[ 0.369572] NetLabel: domain hash size = 128
[ 0.369573] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.369587] NetLabel: unlabeled traffic allowed by default
[ 0.369657] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.369662] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.371708] Switched to clocksource hpet
[ 0.377839] AppArmor: AppArmor Filesystem Enabled
[ 0.377917] pnp: PnP ACPI init
[ 0.378005] pnp 00:00: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[ 0.378057] pnp 00:01: Plug and Play ACPI device, IDs SYN1b16 SYN1b00 SYN0002 PNP0f13 (active)
[ 0.378202] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.378205] system 00:02: [io 0xfd60-0xfd63] has been reserved
[ 0.378206] system 00:02: [io 0x1000-0x100f] has been reserved
[ 0.378208] system 00:02: [io 0xffff] has been reserved
[ 0.378210] system 00:02: [io 0xffff] has been reserved
[ 0.378213] system 00:02: [io 0x0400-0x0453] could not be reserved
[ 0.378215] system 00:02: [io 0x0458-0x047f] has been reserved
[ 0.378217] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.378219] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.378222] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.378252] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.378300] system 00:04: [io 0x0454-0x0457] has been reserved
[ 0.378303] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.448038] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.448041] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.448043] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.448045] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.448047] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.448049] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.448051] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.448053] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[ 0.448055] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.448057] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.448059] system 00:05: [mem 0x7ea00000-0x7ea00fff] has been reserved
[ 0.448062] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.448291] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[ 0.448293] system 00:06: [mem 0x40000000-0x401fffff] has been reserved
[ 0.448295] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.448312] pnp: PnP ACPI: found 7 devices
[ 0.454924] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window
[ 0.454927] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.454955] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7eb00000-0x7ebfffff]
[ 0.454959] pci 0000:02:00.0: BAR 6: assigned [mem 0x7eb00000-0x7eb007ff pref]
[ 0.454961] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.454968] pci 0000:00:1c.0: bridge window [mem 0x7eb00000-0x7ebfffff]
[ 0.454972] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x904fffff 64bit pref]
[ 0.454980] pci 0000:03:00.0: BAR 6: assigned [mem 0x90580000-0x9058ffff pref]
[ 0.454982] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.454987] pci 0000:00:1c.1: bridge window [mem 0x90500000-0x905fffff]
[ 0.454997] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.454999] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.455001] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.455003] pci_bus 0000:00: resource 7 [mem 0x7ea00000-0xfeafffff]
[ 0.455005] pci_bus 0000:02: resource 1 [mem 0x7eb00000-0x7ebfffff]
[ 0.455007] pci_bus 0000:02: resource 2 [mem 0x90400000-0x904fffff 64bit pref]
[ 0.455009] pci_bus 0000:03: resource 1 [mem 0x90500000-0x905fffff]
[ 0.455036] NET: Registered protocol family 2
[ 0.455207] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.455254] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.455303] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.455325] TCP: reno registered
[ 0.455330] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.455339] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.455387] NET: Registered protocol family 1
[ 0.455402] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.484078] PCI: CLS 64 bytes, default 64
[ 0.484137] Trying to unpack rootfs image as initramfs...
[ 0.836743] Freeing initrd memory: 20316K (ffff880035842000 - ffff880036c19000)
[ 0.836769] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.836772] software IO TLB [mem 0x6bdb0000-0x6fdb0000] (64MB) mapped at [ffff88006bdb0000-ffff88006fdaffff]
[ 0.836812] Simple Boot Flag at 0x44 set to 0x1
[ 0.836932] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.836987] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[ 0.836994] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[ 0.837058] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.837087] Scanning for low memory corruption every 60 seconds
[ 0.837496] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.837537] Initialise system trusted keyring
[ 0.837561] audit: initializing netlink subsys (disabled)
[ 0.837577] audit: type=2000 audit(1437585478.824:1): initialized
[ 0.837938] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.839501] zpool: loaded
[ 0.839505] zbud: loaded
[ 0.839692] VFS: Disk quotas dquot_6.5.2
[ 0.839735] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.840242] fuse init (API version 7.23)
[ 0.840400] Key type big_key registered
[ 0.840793] Key type asymmetric registered
[ 0.840797] Asymmetric key parser 'x509' registered
[ 0.840838] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.840869] io scheduler noop registered
[ 0.840872] io scheduler deadline registered (default)
[ 0.840903] io scheduler cfq registered
[ 0.841265] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.841283] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.841317] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.841319] vesafb: scrolling: redraw
[ 0.841320] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.841338] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90004400000, using 4160k, total 4160k
[ 0.841430] Console: switching to colour frame buffer device 170x48
[ 0.841448] fb0: VESA VGA frame buffer device
[ 0.841466] intel_idle: MWAIT substates: 0x21120
[ 0.841467] intel_idle: v0.4 model 0x2A
[ 0.841468] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.841645] ACPI: AC Adapter [ACAD] (on-line)
[ 0.841750] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[ 0.841755] ACPI: Power Button [PWRB]
[ 0.841794] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input1
[ 0.841812] ACPI: Lid Switch [LID0]
[ 0.841849] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2
[ 0.841852] ACPI: Sleep Button [SLPB]
[ 0.841896] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.841899] ACPI: Power Button [PWRF]
[ 0.842088] GHES: HEST is not enabled!
[ 0.842187] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.912409] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.912623] Linux agpgart interface v0.103
[ 0.914911] brd: module loaded
[ 0.915604] loop: module loaded
[ 0.915759] ata_piix 0000:00:1f.2: version 2.13
[ 0.915864] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.068781] scsi host0: ata_piix
[ 1.068960] scsi host1: ata_piix
[ 1.069003] ata1: SATA max UDMA/133 cmd 0x20b8 ctl 0x20cc bmdma 0x2090 irq 19
[ 1.069008] ata2: SATA max UDMA/133 cmd 0x20b0 ctl 0x20c8 bmdma 0x2098 irq 19
[ 1.069117] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.224614] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[ 1.224930] scsi host2: ata_piix
[ 1.225066] scsi host3: ata_piix
[ 1.225103] ata3: SATA max UDMA/133 cmd 0x20a8 ctl 0x20c4 bmdma 0x2070 irq 21
[ 1.225105] ata4: SATA max UDMA/133 cmd 0x20a0 ctl 0x20c0 bmdma 0x2078 irq 21
[ 1.225282] libphy: Fixed MDIO Bus: probed
[ 1.225287] tun: Universal TUN/TAP device driver, 1.6
[ 1.225288] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.225357] PPP generic driver version 2.4.2
[ 1.225455] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.225461] ehci-pci: EHCI PCI platform driver
[ 1.225583] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.225590] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.225605] ehci-pci 0000:00:1a.0: debug port 2
[ 1.229506] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.229522] ehci-pci 0000:00:1a.0: irq 16, io mem 0x90608000
[ 1.240642] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.240691] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.240693] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.240695] usb usb1: Product: EHCI Host Controller
[ 1.240697] usb usb1: Manufacturer: Linux 3.19.0-15-generic ehci_hcd
[ 1.240698] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.240875] hub 1-0:1.0: USB hub found
[ 1.240884] hub 1-0:1.0: 2 ports detected
[ 1.241094] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.241100] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.241113] ehci-pci 0000:00:1d.0: debug port 2
[ 1.245025] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.245041] ehci-pci 0000:00:1d.0: irq 23, io mem 0x90607000
[ 1.256742] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.256855] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.256858] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.256860] usb usb2: Product: EHCI Host Controller
[ 1.256861] usb usb2: Manufacturer: Linux 3.19.0-15-generic ehci_hcd
[ 1.256863] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.257084] hub 2-0:1.0: USB hub found
[ 1.257093] hub 2-0:1.0: 2 ports detected
[ 1.257222] ehci-platform: EHCI generic platform driver
[ 1.257237] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.257243] ohci-pci: OHCI PCI platform driver
[ 1.257255] ohci-platform: OHCI generic platform driver
[ 1.257263] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.257324] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 1.275259] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.275264] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.275555] mousedev: PS/2 mouse device common for all mice
[ 1.276739] rtc_cmos 00:03: RTC can wake from S4
[ 1.276869] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.276902] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.276922] i2c /dev entries driver
[ 1.276991] device-mapper: uevent: version 1.0.3
[ 1.277053] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 1.277069] Intel P-state driver initializing.
[ 1.277240] Consider also installing thermald for improved thermal control.
[ 1.277247] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.277777] PCCT header not found.
[ 1.277779] ACPI PCC probe failed.
[ 1.277884] TCP: cubic registered
[ 1.277998] NET: Registered protocol family 10
[ 1.278235] NET: Registered protocol family 17
[ 1.278247] Key type dns_resolver registered
[ 1.278975] Loading compiled-in X.509 certificates
[ 1.280077] Loaded X.509 cert 'Magrathea: Glacier signing key: 9e64807092f3a6a8f66f3b7ea4cb3767fdfae08a'
[ 1.280096] registered taskstats version 1
[ 1.282222] Key type trusted registered
[ 1.285782] Key type encrypted registered
[ 1.285792] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.285797] ima: No TPM chip found, activating TPM-bypass!
[ 1.285819] evm: HMAC attrs: 0x1
[ 1.286286] Magic number: 7:183:290
[ 1.286317] tty tty23: hash matches
[ 1.286386] rtc_cmos 00:03: setting system clock to 2015-07-22 17:17:59 UTC (1437585479)
[ 1.286446] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.286447] EDD information not available.
[ 1.286536] PM: Hibernation image not present or could not be loaded.
[ 1.296555] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.553081] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.569107] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.685968] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.685972] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.686521] hub 1-1:1.0: USB hub found
[ 1.686869] hub 1-1:1.0: 4 ports detected
[ 1.701972] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.701977] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.702539] hub 2-1:1.0: USB hub found
[ 1.702878] hub 2-1:1.0: 4 ports detected
[ 1.837354] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[ 1.877471] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 1.877488] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 1.955649] ata1.00: ATA-8: TOSHIBA MQ01ABF050, AM001J, max UDMA/100
[ 1.955659] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.955676] ata1.01: ATAPI: MATSHITA DVD-RAM UJ8E1, 1.00, max UDMA/100
[ 1.957646] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.970218] ata1.00: configured for UDMA/100
[ 1.973672] usb 2-1.2: new low-speed USB device number 3 using ehci-pci
[ 2.001778] ata1.01: configured for UDMA/100
[ 2.002852] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABF0 1J PQ: 0 ANSI: 5
[ 2.003192] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.003216] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.003220] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.006430] sd 0:0:0:0: [sda] Write Protect is off
[ 2.006435] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.009803] scsi 0:0:1:0: CD-ROM MATSHITA DVD-RAM UJ8E1 1.00 PQ: 0 ANSI: 5
[ 2.023582] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.045259] sr 0:0:1:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.045276] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.045413] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 2.045495] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 2.055179] usb 1-1.1: string descriptor 0 read error: -22
[ 2.055193] usb 1-1.1: New USB device found, idVendor=04ca, idProduct=3006
[ 2.055199] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.097610] ata2.00: failed to resume link (SControl 0)
[ 2.125821] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 2.252519] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 >
[ 2.253585] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.262901] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b337
[ 2.262911] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.262917] usb 1-1.3: Product: HD WebCam
[ 2.262921] usb 1-1.3: Manufacturer: HD WebCam
[ 2.838677] Switched to clocksource tsc
[ 3.126686] ata2.01: failed to resume link (SControl 0)
[ 3.137724] ata2.00: SATA link down (SStatus 0 SControl 0)
[ 3.137737] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 3.138144] Freeing unused kernel memory: 1408K (ffffffff81d36000 - ffffffff81e96000)
[ 3.138147] Write protecting the kernel read-only data: 12288k
[ 3.138327] Freeing unused kernel memory: 188K (ffff8800017d1000 - ffff880001800000)
[ 3.138427] Freeing unused kernel memory: 344K (ffff880001baa000 - ffff880001c00000)
[ 3.150345] random: systemd-udevd urandom read with 18 bits of entropy available
[ 3.170611] sdhci: Secure Digital Host Controller Interface driver
[ 3.170615] sdhci: Copyright(c) Pierre Ossman
[ 3.172456] pps_core: LinuxPPS API ver. 1 registered
[ 3.172458] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.172655] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
[ 3.172870] sdhci-pci 0000:02:00.1: No vmmc regulator found
[ 3.172872] sdhci-pci 0000:02:00.1: No vqmmc regulator found
[ 3.174385] PTP clock support registered
[ 3.174532] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA 64-bit
[ 3.178687] tg3.c:v3.137 (May 11, 2014)
[ 3.194107] usb 2-1.2: New USB device found, idVendor=09da, idProduct=000a
[ 3.194111] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.194880] usb 2-1.2: can't set config #1, error -32
[ 3.195103] usb 2-1.2: USB disconnect, device number 3
[ 3.218712] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address 20:89:84:67:e0:24
[ 3.218717] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 3.218719] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 3.218721] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 3.430980] usb 2-1.2: new low-speed USB device number 4 using ehci-pci
[ 3.528213] usb 2-1.2: New USB device found, idVendor=09da, idProduct=000a
[ 3.528223] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.528229] usb 2-1.2: Product: USB Mouse
[ 3.528234] usb 2-1.2: Manufacturer: A4Tech
[ 3.533137] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.537252] usbcore: registered new interface driver usbhid
[ 3.537254] usbhid: USB HID core driver
[ 3.539121] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:09DA:000A.0001/input/input7
[ 3.539229] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.0-1.2/input0
[ 4.305189] psmouse serio1: synaptics: queried max coordinates: x [..5774], y [..5022]
[ 4.427373] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1694, fw id: 705179
[ 4.503510] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 4.885197] random: nonblocking pool is initialized
[ 6.094778] EXT4-fs (sda12): INFO: recovery required on readonly filesystem
[ 6.094782] EXT4-fs (sda12): write access will be enabled during recovery
[ 6.657653] EXT4-fs (sda12): orphan cleanup on readonly fs
[ 6.657723] EXT4-fs (sda12): 1 orphan inode deleted
[ 6.657725] EXT4-fs (sda12): recovery complete
[ 6.735601] EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: (null)
[ 7.276089] systemd[1]: RTC configured in localtime, applying delta of 270 minutes to system time.
[ 7.451586] systemd[1]: Inserted module 'autofs4'
[ 7.565564] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 7.565696] systemd[1]: Detected architecture x86-64.
[ 7.580949] systemd[1]: Set hostname to <hamid67>.
[ 8.990475] systemd[1]: Reached target Encrypted Volumes.
[ 8.990489] systemd[1]: Starting Encrypted Volumes.
[ 8.990526] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.990534] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 8.990737] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.990749] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 8.990779] systemd[1]: Created slice Root Slice.
[ 8.990788] systemd[1]: Starting Root Slice.
[ 8.990825] systemd[1]: Listening on udev Control Socket.
[ 8.990833] systemd[1]: Starting udev Control Socket.
[ 8.990914] systemd[1]: Listening on Journal Audit Socket.
[ 8.990923] systemd[1]: Starting Journal Audit Socket.
[ 8.991006] systemd[1]: Created slice User and Session Slice.
[ 8.991015] systemd[1]: Starting User and Session Slice.
[ 8.991038] systemd[1]: Listening on udev Kernel Socket.
[ 8.991046] systemd[1]: Starting udev Kernel Socket.
[ 8.991087] systemd[1]: Listening on Journal Socket.
[ 8.991100] systemd[1]: Starting Journal Socket.
[ 8.991130] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.991139] systemd[1]: Starting Journal Socket (/dev/log).
[ 8.991219] systemd[1]: Created slice System Slice.
[ 8.991234] systemd[1]: Starting System Slice.
[ 8.991743] systemd[1]: Starting Uncomplicated firewall...
[ 8.992364] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 8.992951] systemd[1]: Mounting Debug File System...
[ 8.993528] systemd[1]: Starting Nameserver information manager...
[ 8.994056] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.994639] systemd[1]: Starting Increase datagram queue length...
[ 8.995206] systemd[1]: Starting Setup Virtual Console...
[ 8.995821] systemd[1]: Starting udev Coldplug all Devices...
[ 8.996387] systemd[1]: Started Read required files in advance.
[ 8.996542] systemd[1]: Starting Read required files in advance...
[ 8.996668] systemd[1]: Created slice system-getty.slice.
[ 8.996681] systemd[1]: Starting system-getty.slice.
[ 8.996698] systemd[1]: Reached target Slices.
[ 8.996706] systemd[1]: Starting Slices.
[ 8.997298] systemd[1]: Mounting Huge Pages File System...
[ 9.147554] systemd[1]: Started Set Up Additional Binary Formats.
[ 9.147591] systemd[1]: Reached target Remote File Systems (Pre).
[ 9.147603] systemd[1]: Starting Remote File Systems (Pre).
[ 9.147745] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 9.147755] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 9.147815] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 9.147824] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 9.147858] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 9.147868] systemd[1]: Starting fsck to fsckd communication Socket.
[ 9.355171] systemd[1]: Starting Load Kernel Modules...
[ 9.355746] systemd[1]: Started Braille Device Support.
[ 9.355827] systemd[1]: Starting Braille Device Support...
[ 9.355879] systemd[1]: Listening on Delayed Shutdown Socket.
[ 9.355889] systemd[1]: Starting Delayed Shutdown Socket.
[ 9.356888] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 9.357145] systemd[1]: Started Setup Virtual Console.
[ 9.360872] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 9.379339] systemd[1]: Started Uncomplicated firewall.
[ 9.517753] systemd[1]: Started udev Coldplug all Devices.
[ 9.518448] systemd[1]: Starting udev Wait for Complete Device Initialization...
[ 9.645556] systemd[1]: Mounted POSIX Message Queue File System.
[ 9.645598] systemd[1]: Mounted Debug File System.
[ 9.645618] systemd[1]: Mounted Huge Pages File System.
[ 9.646491] systemd[1]: Started Increase datagram queue length.
[ 9.656003] systemd[1]: Listening on Syslog Socket.
[ 9.656020] systemd[1]: Starting Syslog Socket.
[ 9.656645] systemd[1]: Starting Journal Service...
[ 9.723309] systemd[1]: Started Nameserver information manager.
[ 9.923493] lp: driver loaded but no devices found
[ 9.981756] ppdev: user-space parallel port driver
[ 10.246662] systemd[1]: Started Load Kernel Modules.
[ 10.247315] systemd[1]: Mounting FUSE Control File System...
[ 10.247396] systemd[1]: Mounted Configuration File System.
[ 10.248014] systemd[1]: Starting Apply Kernel Variables...
[ 10.249880] systemd[1]: Mounted FUSE Control File System.
[ 10.352193] systemd[1]: Started Journal Service.
[ 12.255497] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258)
[ 12.255504] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.255508] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 12.255512] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.255513] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 12.255516] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.255517] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 12.255520] ACPI: If an ACPI driver is available