سلام دوستان من الان xubuntu 16.04 دارم ولی نمی دونم چرا هم گرما و سرعت فن لپ تاپ نسبت به ویندوز 8 بیشتره ؟؟ (لپ تاپم هیبرید گرافیکه اینتل و amd ) در صورتی که تو ویندوز با باز بودن اکثر نرم افزارا گرمای سی پی یو و گرافیک متوسط بین 45 تا 50 ولی تو ابونتو گرما بین 60 تا 65 !!!
برای حل مشکل اول اومدم گرافیک اینتل رو از سایت
https://01.org گرفتم که برای نسخه 15.10 بود و بادستکاری نسخه اوبونتو نصب کردم ولی باز مشکل گرما و زود دشارژ شدن بود اومدم با vgaswtichheroo گرافیک amd رو خاموش کنم که اصلا دایکتروی به اسم اون نبود و (در حالی که یک بار مانجارو رو نصب کرده بودم پوشه vgaswtichheroo بود) رفتم سراغ روش power_method که باز فایلی به اسم اون تو پوشه مورد نظر نبود
بعدا اومدم تو گراب پارامتر روبرو قرار دادم radeon.runpm=0 قبل از اون پارامتر radeon.modeset=0 قرار داده بودم که باز هیچ اثری نداشت نمی دونم باید گراقیک amd باید نصب کنیم تا بتونیم خاموشش کنیم یا نه
این هم خروجی چند دستور
masoud@NP350V5X:~$ lspci | grep -i VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series]masoud@NP350V5X:~$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +63.0°C (crit = +210.0°C)
radeon-pci-0100
Adapter: PCI adapter
temp1: +53.5°C (crit = +120.0°C, hyst = +90.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +63.0°C (high = +87.0°C, crit = +105.0°C)
Core 0: +62.0°C (high = +87.0°C, crit = +105.0°C)
Core 1: +61.0°C (high = +87.0°C, crit = +105.0°C)masoud@NP350V5X:~$ xrandr --listproviders
Providers: number : 3
Provider 0: id: 0x6e cap: 0x9, Source Output, Sink Offload crtcs: 4 outputs: 5 associated providers: 2 name:Intel
Provider 1: id: 0x45 cap: 0x6, Sink Output, Source Offload crtcs: 6 outputs: 0 associated providers: 2 name:TURKS @ pci:0000:01:00.0
Provider 2: id: 0x45 cap: 0x6, Sink Output, Source Offload crtcs: 6 outputs: 0 associated providers: 2 name:TURKS @ pci:0000:01:00.0masoud@NP350V5X:~$ lspci -nnk | grep -i vga -A3 | grep 'in use'
Kernel driver in use: i915
Kernel driver in use: radeonmasoud@NP350V5X:~$ glxinfo | grep OpenGL
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
OpenGL core profile version string: 3.3 (Core Profile) Mesa 11.2.0
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 3.0 Mesa 11.2.0
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.0 Mesa 11.2.0
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.00
OpenGL ES profile extensions:
DRI_PRIME=1 glxinfo | grep "OpenGL renderer"
OpenGL renderer string: Gallium 0.4 on AMD TURKS (DRM 2.43.0, LLVM 3.8.0)masoud@NP350V5X:~$ cpufreq-info
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
driver: intel_pstate
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 0.97 ms.
hardware limits: 1.20 GHz - 3.20 GHz
available cpufreq governors: performance, powersave
current policy: frequency should be within 1.20 GHz and 3.20 GHz.
The governor "powersave" may decide which speed to use
within this range.
current CPU frequency is 1.30 GHz.
analyzing CPU 1:
driver: intel_pstate
CPUs which run at the same hardware frequency: 1
CPUs which need to have their frequency coordinated by software: 1
maximum transition latency: 0.97 ms.
hardware limits: 1.20 GHz - 3.20 GHz
available cpufreq governors: performance, powersave
current policy: frequency should be within 1.20 GHz and 3.20 GHz.
The governor "powersave" may decide which speed to use
within this range.
current CPU frequency is 1.38 GHz.
analyzing CPU 2:
driver: intel_pstate
CPUs which run at the same hardware frequency: 2
CPUs which need to have their frequency coordinated by software: 2
maximum transition latency: 0.97 ms.
hardware limits: 1.20 GHz - 3.20 GHz
available cpufreq governors: performance, powersave
current policy: frequency should be within 1.20 GHz and 3.20 GHz.
The governor "powersave" may decide which speed to use
within this range.
current CPU frequency is 1.28 GHz.
analyzing CPU 3:
driver: intel_pstate
CPUs which run at the same hardware frequency: 3
CPUs which need to have their frequency coordinated by software: 3
maximum transition latency: 0.97 ms.
hardware limits: 1.20 GHz - 3.20 GHz
available cpufreq governors: performance, powersave
current policy: frequency should be within 1.20 GHz and 3.20 GHz.
The governor "powersave" may decide which speed to use
within this range.
current CPU frequency is 1.28 GHz.ممنون میشم کمک کنید گرافیک amd رو خاموش کنم
موضوع: مشکل گرما و سرعت فن (حل شد) (دفعات بازدید: 976 بار)
