این torrc که گفتم
پل هاش برای من که خوب کار می کنه امتحان کنید
## Configuration file for a typical Tor user
## Last updated 28 February 2019 for Tor 0.3.5.1-alpha.
## (may or may not work for much older or much newer versions of Tor.)
##
## Lines that begin with "## " try to explain what's going on. Lines
## that begin with just "#" are disabled commands: you can enable them
## by removing the "#" symbol.
##
## See 'man tor', or https://www.torproject.org/docs/tor-manual.html,
## for more options you can use in this file.
##
## Tor will look for this file in various places based on your platform:
## https://www.torproject.org/docs/faq#torrc
User tor
## Tor opens a SOCKS proxy on port 9050 by default -- even if you don't
## configure one below. Set "SOCKSPort 0" if you plan to run Tor only
## as a relay, and not make any local application connections yourself.
#SOCKSPort 9050 # Default: Bind to localhost:9050 for local connections.
#SOCKSPort 192.168.0.1:9100 # Bind to this address:port too.
## Entry policies to allow/deny SOCKS requests based on IP address.
## First entry that matches wins. If no SOCKSPolicy is set, we accept
## all (and only) requests that reach a SOCKSPort. Untrusted users who
## can access your SOCKSPort may be able to learn about the connections
## you make.
#SOCKSPolicy accept 192.168.0.0/16
#SOCKSPolicy accept6 FC00::/7
#SOCKSPolicy reject *
## Logs go to stdout at level "notice" unless redirected by something
## else, like one of the below lines. You can have as many Log lines as
## you want.
##
## We advise using "notice" in most cases, since anything more verbose
## may provide sensitive information to an attacker who obtains the logs.
##
## Send all messages of level 'notice' or higher to /var/log/tor/notices.log
#Log notice file /var/log/tor/notices.log
## Send every possible message to /var/log/tor/debug.log
#Log debug file /var/log/tor/debug.log
## Use the system log instead of Tor's logfiles
Log notice syslog
## To send all messages to stderr:
#Log debug stderr
## Uncomment this to start the process in the background... or use
## --runasdaemon 1 on the command line. This is ignored on Windows;
## see the FAQ entry if you want Tor to run as an NT service.
#RunAsDaemon 1
## The directory for keeping all the keys/etc. By default, we store
## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
DataDirectory /var/lib/tor
## The port on which Tor will listen for local connections from Tor
## controller applications, as documented in control-spec.txt.
#ControlPort 9051
## If you enable the controlport, be sure to enable one of these
## authentication methods, to prevent attackers from accessing it.
#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C
#CookieAuthentication 1
############### This section is just for location-hidden services ###
## Once you have configured a hidden service, you can look at the
## contents of the file ".../hidden_service/hostname" for the address
## to tell people.
##
## HiddenServicePort x y:z says to redirect requests on port x to the
## address y:z.
#HiddenServiceDir /var/lib/tor/hidden_service/
#HiddenServicePort 80 127.0.0.1:80
#HiddenServiceDir /var/lib/tor/other_hidden_service/
#HiddenServicePort 80 127.0.0.1:80
#HiddenServicePort 22 127.0.0.1:22
################ This section is just for relays #####################
#
## See https://www.torproject.org/docs/tor-doc-relay for details.
## Required: what port to advertise for incoming Tor connections.
#ORPort 9001
## If you want to listen on a port other than the one advertised in
## ORPort (e.g. to advertise 443 but bind to 9090), you can do it as
## follows. You'll need to do ipchains or other port forwarding
## yourself to make this work.
#ORPort 443 NoListen
#ORPort 127.0.0.1:9090 NoAdvertise
## If you want to listen on IPv6 your numeric address must be explicitly
## between square brackets as follows. You must also listen on IPv4.
#ORPort [2001:DB8::1]:9050
## The IP address or full DNS name for incoming connections to your
## relay. Leave commented out and Tor will guess.
#Address noname.example.com
## If you have multiple network interfaces, you can specify one for
## outgoing traffic to use.
## OutboundBindAddressExit will be used for all exit traffic, while
## OutboundBindAddressOR will be used for all OR and Dir connections
## (DNS connections ignore OutboundBindAddress).
## If you do not wish to differentiate, use OutboundBindAddress to
## specify the same address for both in a single line.
#OutboundBindAddressExit 10.0.0.4
#OutboundBindAddressOR 10.0.0.5
## A handle for your relay, so people don't have to refer to it by key.
## Nicknames must be between 1 and 19 characters inclusive, and must
## contain only the characters [a-zA-Z0-9].
## If not set, "Unnamed" will be used.
#Nickname ididnteditheconfig
## Define these to limit how much relayed traffic you will allow. Your
## own traffic is still unthrottled. Note that RelayBandwidthRate must
## be at least 75 kilobytes per second.
## Note that units for these config options are bytes (per second), not
## bits (per second), and that prefixes are binary prefixes, i.e. 2^10,
## 2^20, etc.
#RelayBandwidthRate 100 KBytes # Throttle traffic to 100KB/s (800Kbps)
#RelayBandwidthBurst 200 KBytes # But allow bursts up to 200KB (1600Kb)
## Use these to restrict the maximum traffic per day, week, or month.
## Note that this threshold applies separately to sent and received bytes,
## not to their sum: setting "40 GB" may allow up to 80 GB total before
## hibernating.
##
## Set a maximum of 40 gigabytes each way per period.
#AccountingMax 40 GBytes
## Each period starts daily at midnight (AccountingMax is per day)
#AccountingStart day 00:00
## Each period starts on the 3rd of the month at 15:00 (AccountingMax
## is per month)
#AccountingStart month 3 15:00
## Administrative contact information for this relay or bridge. This line
## can be used to contact you if your relay or bridge is misconfigured or
## something else goes wrong. Note that we archive and publish all
## descriptors containing these lines and that Google indexes them, so
## spammers might also collect them. You may want to obscure the fact that
## it's an email address and/or generate a new address for this purpose.
##
## If you are running multiple relays, you MUST set this option.
##
#ContactInfo Random Person <nobody AT example dot com>
## You might also include your PGP or GPG fingerprint if you have one:
#ContactInfo 0xFFFFFFFF Random Person <nobody AT example dot com>
## Uncomment this to mirror directory information for others. Please do
## if you have enough bandwidth.
#DirPort 9030 # what port to advertise for directory connections
## If you want to listen on a port other than the one advertised in
## DirPort (e.g. to advertise 80 but bind to 9091), you can do it as
## follows. below too. You'll need to do ipchains or other port
## forwarding yourself to make this work.
#DirPort 80 NoListen
#DirPort 127.0.0.1:9091 NoAdvertise
## Uncomment to return an arbitrary blob of html on your DirPort. Now you
## can explain what Tor is if anybody wonders why your IP address is
## contacting them. See contrib/tor-exit-notice.html in Tor's source
## distribution for a sample.
#DirPortFrontPage /etc/tor/tor-exit-notice.html
## Uncomment this if you run more than one Tor relay, and add the identity
## key fingerprint of each Tor relay you control, even if they're on
## different networks. You declare it here so Tor clients can avoid
## using more than one of your relays in a single circuit. See
## https://www.torproject.org/docs/faq#MultipleRelays
## However, you should never include a bridge's fingerprint here, as it would
## break its concealability and potentially reveal its IP/TCP address.
##
## If you are running multiple relays, you MUST set this option.
##
## Note: do not use MyFamily on bridge relays.
#MyFamily $keyid,$keyid,...
## Uncomment this if you want your relay to be an exit, with the default
## exit policy (or whatever exit policy you set below).
## (If ReducedExitPolicy, ExitPolicy, or IPv6Exit are set, relays are exits.
## If none of these options are set, relays are non-exits.)
#ExitRelay 1
## Uncomment this if you want your relay to allow IPv6 exit traffic.
## (Relays do not allow any exit traffic by default.)
#IPv6Exit 1
## Uncomment this if you want your relay to be an exit, with a reduced set
## of exit ports.
#ReducedExitPolicy 1
## Uncomment these lines if you want your relay to be an exit, with the
## specified set of exit IPs and ports.
##
## A comma-separated list of exit policies. They're considered first
## to last, and the first match wins.
##
## If you want to allow the same ports on IPv4 and IPv6, write your rules
## using accept/reject *. If you want to allow different ports on IPv4 and
## IPv6, write your IPv6 rules using accept6/reject6 *6, and your IPv4 rules
## using accept/reject *4.
##
## If you want to _replace_ the default exit policy, end this with either a
## reject *:* or an accept *:*. Otherwise, you're _augmenting_ (prepending to)
## the default exit policy. Leave commented to just use the default, which is
## described in the man page or at
## https://www.torproject.org/documentation.html
##
## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses
## for issues you might encounter if you use the default exit policy.
##
## If certain IPs and ports are blocked externally, e.g. by your firewall,
## you should update your exit policy to reflect this -- otherwise Tor
## users will be told that those destinations are down.
##
## For security, by default Tor rejects connections to private (local)
## networks, including to the configured primary public IPv4 and IPv6 addresses,
## and any public IPv4 and IPv6 addresses on any interface on the relay.
## See the man page entry for ExitPolicyRejectPrivate if you want to allow
## "exit enclaving".
##
#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports on IPv4 and IPv6 but no more
#ExitPolicy accept *:119 # accept nntp ports on IPv4 and IPv6 as well as default exit policy
#ExitPolicy accept *4:119 # accept nntp ports on IPv4 only as well as default exit policy
#ExitPolicy accept6 *6:119 # accept nntp ports on IPv6 only as well as default exit policy
#ExitPolicy reject *:* # no exits allowed
## Bridge relays (or "bridges") are Tor relays that aren't listed in the
## main directory. Since there is no complete public list of them, even an
## ISP that filters connections to all the known Tor relays probably
## won't be able to block all the bridges. Also, websites won't treat you
## differently because they won't know you're running Tor. If you can
## be a real relay, please do; but if not, be a bridge!
##
## Warning: when running your Tor as a bridge, make sure than MyFamily is
## NOT configured.
#BridgeRelay 1
## By default, Tor will advertise your bridge to users through various
## mechanisms like https://bridges.torproject.org/. If you want to run
## a private bridge, for example because you'll give out your bridge
## address manually to your friends, uncomment this line:
#PublishServerDescriptor 0
## Configuration options can be imported from files or folders using the %include
## option with the value being a path. This path can have wildcards. Wildcards are
## expanded first, using lexical order. Then, for each matching file or folder, the following
## rules are followed: if the path is a file, the options from the file will be parsed as if
## they were written where the %include option is. If the path is a folder, all files on that
## folder will be parsed following lexical order. Files starting with a dot are ignored. Files
## on subfolders are ignored.
## The %include option can be used recursively.
#%include /etc/torrc.d/*.conf
UseBridges 1
ClientTransportPlugin obfs4 exec /usr/bin/obfs4proxy
Bridge obfs4 213.188.244.24:9003 B934C2D6AF3FF4CA3E83C2083B9CB0C526B059C8 cert=3oEFpT//HTYDhTi/VtFHNT6yHJjDPEACsa1wiJSOHiT5zekgrFW8SApInm1/4ApZ9qU7DQ iat-mode=0
Bridge obfs4 130.44.131.139:21550 A85BB204DBAB68B754FECEFF883B2F97A6FA71CD cert=tKWQMfH+fJSp5QobD1yQOm2BNZTZgmf3btXYsYQPXT5wd+I0rCvuz4jEbNuUhVnkC2hKcA iat-mode=0
Bridge obfs4 34.255.123.165:52176 EFF298A7FB2A1056189C5C12B46CD912AA77B16A cert=5CLOANyguG1hzulvbHZNlWy2BoMGk/VTAyfKvA7S0w0v/24XIYTz5tWlKWbyrZhxPEvWFA iat-mode=0
Bridge obfs4 172.104.161.42:44107 D4863EE8B566D87AA3818A49D3517DADED5DA6AA cert=LZmQt0sdJW0yULmy5IC+XFn55kcFXXj4sA0FbpviCoOR/YnEMiVhM88GgEze58IpdobcVw iat-mode=0
Bridge obfs4 185.220.101.172:12346 87A516DE7355F55BB70900A9E437255826C94791 cert=p9L6+25s8bnfkye1ZxFeAE4mAGY7DH4Gaj7dxngIIzP9BtqrHHwZXdjMK0RVIQ34C7aqZw iat-mode=2
Bridge obfs4 89.22.111.66:9096 5713F044CBC3375B269761EEA4999D2968FDE04D cert=xrY+pT8JpA49hW8wpJ0cddmls6jQxb0nyHZezGE0SPxj0hrMlD38xJA4gb4mAwLPw5O1Sw iat-mode=0
خوب این هم پل هایی که گرفتم براتون
obfs4 193.196.38.48:443 07941EC1B754E23766CC9F7CCDE6B8CEBCC8F826 cert=laOQROIyvVs4x6PG4ar4nAgLmqtito1afab1BDyYEXdpuGFJs5OfSvu2n8neOc4kynjcYw iat-mode=0
obfs4 98.32.233.108:8997 1BBE3F38BD684E8A3CCAE2D402AC662994ECCC4A cert=UhY1q8v+uzHWgOGhf5D3+9D6ZdG1/MrImoRPvogqCuTOuEtxWorqznTPslIYI0V5vXHeWw iat-mode=0
obfs4 185.220.101.62:40393 328208E8843BE2C3342941FA7E8AE612F34DE8A2 cert=p9L6+25s8bnfkye1ZxFeAE4mAGY7DH4Gaj7dxngIIzP9BtqrHHwZXdjMK0RVIQ34C7aqZw iat-mode=2
موضوع: عدم اتصال carburetor (دفعات بازدید: 2505 بار)
