مشکل بلوتوث در مانجارو

[saeed89]

سلام چطور میتونم بلوتوثم رو فعال کنم ؟

No Bluetooth Found
plug in a dongle to use Bluetooth


///

[Dragon-]

بلوتوث دارید؟ وصله؟ مدلش چیه؟ از طریق usb وصل میشه؟

[saeed89]

خیر دانگل بلوتوث نیست . لپ تاپه مدل Hp pavilion15

[Dragon-]

خروجی این دستور رو بذارید.

کد: [انتخاب]

lspci
برای اینکار، یه ترمینال باز کنید و دستور رو اونجا بزنید.
برای کپی کردن توی ترمینال، از کلید‌های ctrl + shift + v استفاده کنید. ctrl +v جواب نمیده.
لرای کپی کردن از ترمینال، اول متن مورد نظر رو با موس انتخاب کنید و بعد کلید‌های ctrl + shift + c رو بزنید. ctrl + c برای یه چیز دیگه هست.

موقع فرستادن خروجی دستورات و اینجور چیز‌ها، از تگ کد استفاده کنید تا درست نمایش داده بشه.
برای اینکار، موقع نوشتنِ ارسال، از دکمه‌های بالایی، اونی که علامت # داره رو بزنید تا یه تگ کد داخل متن قرار بگیره.
خروجی رو بین این تگ قرار بدید. از قابلیت پیش‌نمایش استفاده کنید تا ببینید ارسال شما تقریبا چجوری نمایش داده میشه.

[saeed89]

کد: [انتخاب]




➜  ~ inxi --full --verbosity=7 --filter --no-host
System:
  Kernel: 5.16.0-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
    Desktop: GNOME 41.2 tk: GTK 3.24.31 wm: gnome-shell dm: GDM 41.0
    Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Laptop System: Hewlett-Packard product: HP Pavilion 15 Notebook PC
    v: 097D110000005E00000600080 serial: <superuser required> Chassis: type: 10
    serial: <superuser required>
  Mobo: Hewlett-Packard model: 216C v: 30.26 serial: <superuser required>
    UEFI: Insyde v: F.20 date: 03/14/2017
Battery:
  ID-1: BAT0 charge: 22.7 Wh (100.0%) condition: 22.7/22.7 Wh (100.0%)
    volts: 16.8 min: 14.8 model: Hewlett-Packard Primary type: Li-ion
    serial: N/A status: Full
Memory:
  RAM: total: 3.04 GiB used: 1.7 GiB (56.1%)
  RAM Report:
    permissions: Unable to run dmidecode. Root privileges required.
CPU:
  Info: quad core model: AMD A10-5745M APU with Radeon HD Graphics bits: 64
    type: MT MCP smt: enabled arch: Piledriver rev: 1 cache: L1: 192 KiB
    L2: 4 MiB
  Speed (MHz): avg: 1084 high: 1095 min/max: 1100/2100 boost: enabled
    cores: 1: 1074 2: 1083 3: 1086 4: 1095 bogomips: 16776
  Flags: 3dnowprefetch abm aes aperfmperf apic arat avx bmi1 clflush cmov
    cmp_legacy constant_tsc cpb cpuid cr8_legacy cx16 cx8 de decodeassists
    extapic extd_apicid f16c flushbyasid fma fma4 fpu fxsr fxsr_opt ht
    hw_pstate ibs lahf_lm lbrv lm lwp mca mce misalignsse mmx mmxext monitor
    msr mtrr nodeid_msr nonstop_tsc nopl npt nrip_save nx osvw pae pat
    pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_nb pfthreshold pge pni
    popcnt pse pse36 rdtscp rep_good sep skinit ssbd sse sse2 sse4_1 sse4_2
    sse4a ssse3 svm svm_lock syscall tbm tce topoext tsc tsc_scale vmcb_clean
    vme vmmcall wdt xop xsave
Graphics:
  Device-1: AMD Richland [Radeon HD 8610G] vendor: Hewlett-Packard
    driver: radeon v: kernel bus-ID: 00:01.0 chip-ID: 1002:990f class-ID: 0300
  Device-2: AMD Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 /
    Radeon 520 Mobile]
    vendor: Hewlett-Packard driver: radeon v: kernel bus-ID: 01:00.0
    chip-ID: 1002:6660 class-ID: 0380
  Device-3: Realtek HP Truevision HD laptop camera type: USB
    driver: uvcvideo bus-ID: 2-4:2 chip-ID: 0bda:5775 class-ID: 0e02
    serial: <filter>
  Display: wayland server: X.org 1.21.1.2 compositor: gnome-shell driver:
    loaded: radeon note: n/a (using device driver) - try sudo/root
    resolution: <missing: xdpyinfo>
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: AMD Trinity HDMI Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel bus-ID: 00:01.1 chip-ID: 1002:9902
    class-ID: 0403
  Device-2: AMD FCH Azalia vendor: Hewlett-Packard driver: snd_hda_intel
    v: kernel bus-ID: 00:14.2 chip-ID: 1022:780d class-ID: 0403
  Sound Server-1: ALSA v: k5.16.0-1-MANJARO running: yes
  Sound Server-2: JACK v: 1.9.19 running: no
  Sound Server-3: PulseAudio v: 15.0 running: yes
  Sound Server-4: PipeWire v: 0.3.42 running: yes
Network:
  Device-1: Ralink RT3290 Wireless 802.11n 1T/1R PCIe vendor: Hewlett-Packard
    driver: rt2800pci v: 2.3.0 bus-ID: 02:00.0 chip-ID: 1814:3290
    class-ID: 0280
  IF: wlo1 state: up mac: <filter>
  IP v4: <filter> type: dynamic noprefixroute scope: global
    broadcast: <filter>
  IP v6: <filter> type: noprefixroute scope: link
  Device-2: Realtek RTL810xE PCI Express Fast Ethernet
    vendor: Hewlett-Packard driver: r8169 v: kernel port: 2000 bus-ID: 03:00.0
    chip-ID: 10ec:8136 class-ID: 0200
  IF: eno1 state: down mac: <filter>
  WAN IP: <filter>
Bluetooth:
  Device-1: Ralink RT3290 Bluetooth vendor: Hewlett-Packard driver: N/A
    bus-ID: 02:00.1 chip-ID: 1814:3298 class-ID: 0d11
  Report: bt-service: enabled,stopped note: tool can't run
Logical:
  Message: No logical block device data found.
RAID:
  Message: No RAID data found.
Drives:
  Local Storage: total: 465.76 GiB used: 36.2 GiB (7.8%)
  ID-1: /dev/sda vendor: Toshiba model: MQ01ABF050 size: 465.76 GiB
    speed: 3.0 Gb/s type: HDD rpm: 5400 serial: <filter> rev: 2C scheme: GPT
  Optical-1: /dev/sr0 vendor: hp model: DVD A DU8A5SH rev: NH62
    dev-links: cdrom
  Features: speed: 24 multisession: yes audio: yes dvd: yes
    rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition:
  ID-1: / size: 58.76 GiB used: 10.83 GiB (18.4%) fs: ext4 dev: /dev/sda3
    label: N/A uuid: a40c2e40-4358-4722-8da6-50098e63dc67
  ID-2: /boot/efi size: 698.6 MiB used: 288 KiB (0.0%) fs: vfat
    dev: /dev/sda1 label: NO_LABEL uuid: A2B8-521B
  ID-3: /home size: 389.77 GiB used: 25.15 GiB (6.5%) fs: ext4
    dev: /dev/sda4 label: N/A uuid: 70b1e285-e211-4f9d-8081-0e154341d7da
Swap:
  ID-1: swap-1 type: partition size: 8 GiB used: 232.2 MiB (2.8%)
    priority: -2 dev: /dev/sda2 label: N/A
    uuid: 30283b78-ee69-4d41-9782-bea41979e94c
Unmounted:
  Message: No unmounted partitions found.
USB:
  Hub-1: 1-0:1 info: Full speed or root hub ports: 5 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 2-0:1 info: Full speed or root hub ports: 5 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 2-4:2 info: Realtek HP Truevision HD laptop camera type: Video
    driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
    chip-ID: 0bda:5775 class-ID: 0e02 serial: <filter>
  Hub-3: 3-0:1 info: Full speed or root hub ports: 5 rev: 1.1
    speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900
  Hub-4: 4-0:1 info: Full speed or root hub ports: 5 rev: 1.1
    speed: 12 Mb/s chip-ID: 1d6b:0001 class-ID: 0900
  Hub-5: 5-0:1 info: Hi-speed hub with single TT ports: 2 rev: 2.0
    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 5-2:3 info: Xenta 2.4G Wireless Optical Mouse type: Mouse
    driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s
    power: 100mA chip-ID: 1d57:0008 class-ID: 0301
  Hub-6: 6-0:1 info: Super-speed hub ports: 2 rev: 3.0 speed: 5 Gb/s
    chip-ID: 1d6b:0003 class-ID: 0900
Info:
  Processes: 229 Uptime: 3h 12m wakeups: 1 Init: systemd v: 250 Compilers:
  gcc: 11.1.0 Packages: 1239 pacman: 1235 snap: 4 Shell: Zsh v: 5.8
  running-in: gnome-terminal inxi: 3.3.11
➜  ~



[saeed89]

خروجی که گفتید

کد: [انتخاب]







lspci                                                                           
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Richland [Radeon HD 8610G]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 09)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 16)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5
01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 / Radeon 520 Mobile]
02:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
02:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller (rev 07)
05:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
➜  ~





[Dragon-]

از خروجی‌هایی که فرستادید، مشخص هست که چیپست مورد نظر، ralink rt3290 هست.
این چیپست هم وایفای و هم بلوتوث داره.
با جستو‌جو‌ها، مشخص شد که این بلوتوث چیپست درست روی کرنل لینوکس کار نمی‌کنه. یه مدت پیش، یکی از اعضای انجمن مشکلی شبیه همین داشت، چیپستی که توی دستگاه ایشون به کار رفته بود، فکر کنم ralink mt7601u بود، درست مطمئن نیستم.

سه تا بسته مختلف رو می‌تونید امتحان کنید و ببینید کدوم کار میده. rtbth-dkms rtbth-dkms-git و rt3290sta-dkms. این بسته‌ها رو باید از aur نصب کنید.
بهتره قبل از اینکه شروع کنید، از سیستم پشتیبان بگیرید تا اگه مشکلی پیش اومد، بتونید به حالت قبل برگردید.
هربار که یکی رو نصب می‌کنید، کامپیوتر رو راه‌اندازی مجدد کنید و ببینید که درست میشه هست یا نه.
اگه یه بسته کار نکرد، اول پاکش کنید، کامپیوتر رو راه‌اندازی مجدد کنید و بعد برید سراغ بسته بعدی.

برای راحتی کار، اول pamac رو نصب کنید.

کد: [انتخاب]

sudo pacman -Sy pamac
الان dkms و header های کرنل رو نصب کنید.

کد: [انتخاب]

paman install dkms linux-headersبرای نصب بسته‌ها، به دسترسی روت نیاز دارید. دسترسی روت معمولا از طریق اجرای دستکر، همراه sudo انجام میشه. در مورد pamac، باز هم لازمه دسترسی روت داشته باشه. ولی لازم نیست همون اول کار، خود برنامه رو با دسترسی روت اجرا کنید. برنامه قسمتی از کار‌های رو انجام میده و وقتی به دسترسی روت نیاز شد، رمز شما رو می‌پرسه تا بتونه کار‌های لازم رو با دسترسی روت انجام بده.
دقت کنید شما باید اجازه استفاده از sudo رو داشته باشید تا راه بالا کار کنه. معمولا وقتی یه توزیعی رو نصب می‌کنید، کاربری که موقع نصب می‌سازید، این دسترسی‌ها هم بهش تعلق می‌گیره.

بسته linux-headers شامل header های کرنل هست. header ها قسمتی از کد کرنل هستند که برای کامپایل ماژول برای کرنل، مورد نیازه.
بسته dkms، شامل برنامه dkms هست. dkms یه چیزی که باهاش بتونید ماژول‌هایی که همراه کرنل نیستند رو مدیریت کنید.
ماژول‌های کرنل، یه جورایی معادل درایور هستند تا کرنل بتونه از سخت‌افزار‌ها استفاده کنه. البته ماژول‌ها، همیشه درایور نیستند.

بعد از اینکه بسته‌های بالا رو نصب کردید، اول بسته rtbth-dkms-git رو امتحان کنید.

کد: [انتخاب]

pamac build rtbth-dkms-gitبعد کامپیوتر رو خاموش روشن کنید. اول کار، احتمالا وایفای هم کار نمی‌کنه، ولی زیاد نگران نباشید. دستور زیر رو بزنید و ببینید که وایفای و بلوتوث شروع به کار می‌کنند یا نه.

کد: [انتخاب]

sudo modprobe rtbthبرای بلوتوث، مطمئن بشید کا سرویس bluetooth.service اجرا شده. (به احتمال خیلی زیاد موقع بوت شدن، اجرا شده)

کد: [انتخاب]

sudo systemctl start bluetooth.service
اگه کار کرد، بگید. اگه نشد، اول بسته rtbth-dkms-git رو پاک کنید.

کد: [انتخاب]

sudo pamac remove rtbth-dkms-serviceبعد هم کامپیوتر رو راه‌اندازی مجدد کنید و ببینید وایفای مثل قبل کار می‌کنه یا نه.

اگه به اینجا رسیدید، مراحل رو مثل بالا، برای بسته rtbth-dkms انجام بدید. اگه شد، بگید. اگه نشد، مثل بالا، پاکش کنید.

در مورد rt3290sta-dkms، زیاد مطمئن نیستم. از وسط‌های 2015 تا حالا بروزرسانی نشده.

[saeed89]

همه دستورات رو که گفتید وارد کردم .

ولی وقتی دستور  sudo modprobe rtbth رو میزنم ارور میده

کد: [انتخاب]


➜  ~ sudo modprobe rtbth
modprobe: ERROR: could not find module by name='rtbth'
modprobe: ERROR: could not insert 'rtbth': Unknown symbol in module, or unknown parameter (see dmesg)
mknod: /dev/rtbth: File exists
➜  ~ Open dev fail: No such device or address






[Dragon-]

دوباره modprobe رو بزنید و خروجی dmesg رو قرار بدید.

کد: [انتخاب]

sudo dmesg --level err

[saeed89]

دوباره modprobe رو بزنید و خروجی dmesg رو قرار بدید.

کد: [انتخاب]

sudo dmesg --level err

sudo dmesg --level err

کد: [انتخاب]



[   17.460790] wdat_wdt wdat_wdt: can't request region for resource [mem 0xfec000f0-0xfec000f3]
[   45.773362] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[   45.773367] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[   45.773370] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[   45.773373] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[   45.773375] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[   54.130757] usb usb5-port1: disabled by hub (EMI?), re-enabling...
[   60.222361] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[   60.222366] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[   60.222369] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[   60.222372] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[   60.222375] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[  355.516648] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[  355.516654] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[  355.516656] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[  355.516659] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[  355.516662] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[  366.202044] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[  366.202049] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[  366.202051] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[  366.202054] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[  366.202057] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[  390.826426] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[  390.826432] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[  390.826435] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[  390.826438] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[  390.826442] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
➜  ~






[saeed89]

آیا کسی هست به داد ما برسد ؟

[Dragon-]

از خروجی dmesg که به نتیجه‌ای نرسیدم.
الان دقیقا کدوم بسته رو نصب کردید؟ خروجی این دستور چیه؟

کد: [انتخاب]

dkms status

[saeed89]

کد: [انتخاب]

➜  ~ dkms status
Deprecated feature: REMAKE_INITRD
rtbth/3.9.6.r10.gf4fba63, 4.14.260-1-MANJARO, x86_64: installedDeprecated feature: REMAKE_INITRD
Deprecated feature: REMAKE_INITRD

rtbth/3.9.6.r10.gf4fba63, 5.15.12-1-MANJARO, x86_64: installedDeprecated feature: REMAKE_INITRD

➜  ~




این خروجی که گفتید .

[saeed89]

sudo dmesg --level err

sudo modprobe rtbth ببخشید اشتباه من بود گفته بودید دوباره  modprobe اجرا کنید دستور sudo dmesg --level err
بزنید نزده بودم .


الان که دوباره دستور قبلی رو که گفتید اجرا میکنم این میشه

کد: [انتخاب]

➜  ~ sudo dmesg --level err
[   14.670487] wdat_wdt wdat_wdt: can't request region for resource [mem 0xfec000f0-0xfec000f3]
[   34.627099] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[   34.627105] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[   34.627107] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[   34.627110] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[   34.627113] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[   49.284995] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[   49.285000] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[   49.285002] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[   49.285005] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[   49.285008] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[   74.760858] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[   74.760863] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[   74.760866] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[   74.760868] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[   74.760872] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[   86.411154] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[   86.411159] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[   86.411162] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[   86.411165] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[   86.411168] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[  120.519083] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[  120.519087] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[  120.519090] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[  120.519093] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[  120.519096] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[  158.252979] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[  158.252985] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[  158.252987] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[  158.252990] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[  158.252993] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[ 1564.523086] usb 5-2: device descriptor read/64, error -71
[ 1565.946112] usb 5-2: device not accepting address 6, error -71
[ 1570.803069] usb 5-2: device descriptor read/64, error -71
[ 1645.722383] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[ 1645.722388] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[ 1645.722391] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[ 1645.722393] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[ 1645.722396] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[ 1687.479600] usb 5-2: device descriptor read/64, error -71
[ 1689.266302] usb 5-2: device descriptor read/64, error -71
[ 1713.946100] usb 5-2: device not accepting address 20, error -71
[ 2405.881627] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[ 2405.881632] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[ 2405.881634] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[ 2405.881637] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[ 2405.881640] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[ 2772.840283] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[ 2772.840289] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[ 2772.840292] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[ 2772.840294] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[ 2772.840297] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[ 3077.035159] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[ 3077.035165] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[ 3077.035167] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[ 3077.035170] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[ 3077.035173] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[ 3379.442592] usb 5-2: device descriptor read/64, error -71
[ 3397.799035] usb 5-2: device not accepting address 24, error -71
[ 4136.738996] usb 5-2: device descriptor read/64, error -71
[ 8297.011715] usb usb5-port2: Cannot enable. Maybe the USB cable is bad?
[ 8303.811387] usb 5-2: device descriptor read/64, error -71
[ 8320.471389] usb 5-2: device descriptor read/64, error -71
[ 8321.114552] usb 5-2: device not accepting address 43, error -71
[ 9322.311105] usb 5-2: device descriptor read/64, error -71
[ 9322.954570] usb 5-2: device not accepting address 47, error -71
[ 9567.167456] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[ 9567.167460] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[ 9567.167463] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[ 9567.167466] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[ 9567.167470] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[ 9657.182249] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[ 9657.182253] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[ 9657.182257] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[ 9657.182259] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[ 9657.182263] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
➜  ~                                                           


[Dragon-]

sudo dmesg --level err

sudo modprobe rtbth ببخشید اشتباه من بود گفته بودید دوباره  modprobe اجرا کنید دستور sudo dmesg --level err
بزنید نزده بودم .


الان که دوباره دستور قبلی رو که گفتید اجرا میکنم این میشه

کد: [انتخاب]

➜  ~ sudo dmesg --level err
[   14.670487] wdat_wdt wdat_wdt: can't request region for resource [mem 0xfec000f0-0xfec000f3]
[   34.627099] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[   34.627105] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[   34.627107] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[   34.627110] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[   34.627113] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[   49.284995] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[   49.285000] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[   49.285002] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[   49.285005] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[   49.285008] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[   74.760858] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[   74.760863] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[   74.760866] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[   74.760868] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[   74.760872] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[   86.411154] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[   86.411159] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[   86.411162] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[   86.411165] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[   86.411168] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[  120.519083] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[  120.519087] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[  120.519090] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[  120.519093] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[  120.519096] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[  158.252979] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[  158.252985] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[  158.252987] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[  158.252990] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[  158.252993] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[ 1564.523086] usb 5-2: device descriptor read/64, error -71
[ 1565.946112] usb 5-2: device not accepting address 6, error -71
[ 1570.803069] usb 5-2: device descriptor read/64, error -71
[ 1645.722383] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[ 1645.722388] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[ 1645.722391] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[ 1645.722393] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[ 1645.722396] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[ 1687.479600] usb 5-2: device descriptor read/64, error -71
[ 1689.266302] usb 5-2: device descriptor read/64, error -71
[ 1713.946100] usb 5-2: device not accepting address 20, error -71
[ 2405.881627] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[ 2405.881632] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[ 2405.881634] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[ 2405.881637] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[ 2405.881640] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[ 2772.840283] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[ 2772.840289] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[ 2772.840292] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[ 2772.840294] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[ 2772.840297] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[ 3077.035159] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[ 3077.035165] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[ 3077.035167] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[ 3077.035170] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[ 3077.035173] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[ 3379.442592] usb 5-2: device descriptor read/64, error -71
[ 3397.799035] usb 5-2: device not accepting address 24, error -71
[ 4136.738996] usb 5-2: device descriptor read/64, error -71
[ 8297.011715] usb usb5-port2: Cannot enable. Maybe the USB cable is bad?
[ 8303.811387] usb 5-2: device descriptor read/64, error -71
[ 8320.471389] usb 5-2: device descriptor read/64, error -71
[ 8321.114552] usb 5-2: device not accepting address 43, error -71
[ 9322.311105] usb 5-2: device descriptor read/64, error -71
[ 9322.954570] usb 5-2: device not accepting address 47, error -71
[ 9567.167456] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[ 9567.167460] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[ 9567.167463] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[ 9567.167466] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[ 9567.167470] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
[ 9657.182249] debugfs: File 'radeon_ring_gfx' in directory '1' already present!
[ 9657.182253] debugfs: File 'radeon_ring_cp1' in directory '1' already present!
[ 9657.182257] debugfs: File 'radeon_ring_cp2' in directory '1' already present!
[ 9657.182259] debugfs: File 'radeon_ring_dma1' in directory '1' already present!
[ 9657.182263] debugfs: File 'radeon_ring_dma2' in directory '1' already present!
➜  ~                                                           


هنوز هم چیزی مربوط به اون ماژول وجود نداره. شاید گزارش‌های اون ماژول به عنوان خطا ذخیره نمیشن.
دوباره سعی کنید ماژول رو با modprobe بارگذاری کنید و این بار، dmesg رو بدون آپشن خاصی و با دسترسی روت اجرا کنید و حدود 30 خط آخر رو بفرستید. یعنی اینجوری

کد: [انتخاب]

sudo dmesgبرای اینکه فقط 30 خط آخر رو ببینید، خروجی رو بدید به tail

کد: [انتخاب]

sudo dmesg | tail -n 30

کد: [انتخاب]

➜  ~ dkms status
Deprecated feature: REMAKE_INITRD
rtbth/3.9.6.r10.gf4fba63, 4.14.260-1-MANJARO, x86_64: installedDeprecated feature: REMAKE_INITRD
Deprecated feature: REMAKE_INITRD

rtbth/3.9.6.r10.gf4fba63, 5.15.12-1-MANJARO, x86_64: installedDeprecated feature: REMAKE_INITRD

➜  ~




این خروجی که گفتید .

نگفتید کدوم بسته رو نصب کردید.
dkms اون ماژول‌ها رو مدیریت میکنه. معمولا ماژول‌های مدیریت شده توسط dkms، توی مسیر زیر قرار میگیرند.

کد: [انتخاب]

/lib/modules/KERNEL-RELEASE/updates/dkmsبه جای KERNEL-RELEASE، اسم انتشار کرنل قرار می‌گیره. اسم انتشار کرنل در حال اجرا رو می‌تونید با دستور uname -r بدست بیارید.

خروجی دستورات زیر رو قرار بدید.

کد: [انتخاب]

ls /lib/modules/$(uname -r)/updates/dkms
modprobe -c | grep -i 'rtbth'
ls /etc/modprobe.d
ls /lib/modprobe.d