سلام دوستان من هاردم فرمت کردم که از msdos به gpt تغییر بدهم ولی بعد از تغییر پارتشین که میخواهم درست کنم با ایرورر مواجه میشم هم به صورت لایو هم به صورت عادی ممنون میشم راهنمای کنینن
GParted 1.4.0
configuration --enable-libparted-dmraid --enable-online-resize
libparted 3.4
========================================
Device: /dev/sda
Model: ATA ADATA SU750
Serial: 2M0229A82HKJ
Sector size: 512
Total sectors: 1000215216
Heads: 255
Sectors/track: 2
Cylinders: 1961206
Partition table: msdos
Partition Type Start End Flags Partition Name File System Label Mount Point
/dev/sda3 Extended 516096 796276735 boot, type extended
/dev/sda5 Logical 518144 22743039 type linux-swap
/dev/sda6 Logical 22745088 796004351 type ext4 /home
/dev/sda1 Primary 796276736 1000215215 type btrfs /, /boot/grub2/i386-pc, /boot/grub2/x86_64-efi, /opt, /root, /.snapshots, /srv, /usr/local, /var
========================================
Device: /dev/sdb
Model: ATA ST9500420AS
Serial: 5VJE0PXG
Sector size: 512
Total sectors: 976773168
Heads: 255
Sectors/track: 2
Cylinders: 1915241
Partition table: gpt
Partition Type Start End Flags Partition Name File System Label Mount Point
/dev/sdb1 Primary 2048 976773119 unknown
========================================
Device: /dev/sdc
Model: UFD 2.0 Silicon-Power16G
Serial:
Sector size: 512
Total sectors: 30558183
Heads: 255
Sectors/track: 2
Cylinders: 59918
Partition table: none
Partition Type Start End Flags Partition Name File System Label Mount Point
/dev/sdc Unpartitioned 0 30558182 iso9660 EOS_202112
========================================
Format /dev/sdb1 as ext4 00:00:21 ( ERROR )
calibrate /dev/sdb1 00:00:00 ( SUCCESS )
path: /dev/sdb1 (partition)
start: 2048
end: 976773119
size: 976771072 (465.76 GiB)
clear old file system signatures in /dev/sdb1 00:00:00 ( SUCCESS )
write 512.00 KiB of zeros at byte offset 0 00:00:00 ( SUCCESS )
write 4.00 KiB of zeros at byte offset 67108864 00:00:00 ( SUCCESS )
write 4.00 KiB of zeros at byte offset 274877906944 00:00:00 ( SUCCESS )
write 512.00 KiB of zeros at byte offset 500106264576 00:00:00 ( SUCCESS )
write 4.00 KiB of zeros at byte offset 500106723328 00:00:00 ( SUCCESS )
write 8.00 KiB of zeros at byte offset 500106780672 00:00:00 ( SUCCESS )
flush operating system cache of /dev/sdb 00:00:00 ( SUCCESS )
set partition type on /dev/sdb1 00:00:00 ( SUCCESS )
new partition type: ext4
create new ext4 file system 00:00:21 ( ERROR )
mkfs.ext4 -F -O ^64bit -L '' '/dev/sdb1' 00:00:21 ( ERROR )
64-bit filesystem support is not enabled. The larger fields afforded by this feature enable full-strength checksumming. Pass -O 64bit to rectify.
Creating filesystem with 122096384 4k blocks and 30531584 inodes
Filesystem UUID: 70a8fb98-cc7a-4d28-883c-1f398d8bcbd6
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
102400000
Allocating group tables: done
Writing inode tables: done
Creating journal (262144 blocks): done
Writing superblocks and filesystem accounting information: 0/3727
mke2fs 1.46.5 (30-Dec-2021)
mkfs.ext4: Input/output error while writing out and closing file system
[/tt]