سلام وقت بخیر
ببخشید دقیقامنم همین مشکل رو دارم باید چکار کنم این چند تا دستور رو زدم خروجی دستور اول
sudo dmesg --level err,warn
[ 0.160540] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.351775] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 0.351865] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.351867] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.351868] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.351868] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.351869] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.351870] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.351871] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.351872] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.351873] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.132851] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20210730/utaddress-204)
[ 1.132858] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20210730/utaddress-204)
[ 1.132862] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20210730/utaddress-204)
[ 1.132865] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20210730/utaddress-204)
[ 1.132868] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20210730/utaddress-204)
[ 1.132870] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20210730/utaddress-204)
[ 1.132873] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.469912] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20210730/psargs-330)
[ 1.469927] No Local Variables are initialized for Method [_GTF]
[ 1.469929] No Arguments are initialized for method [_GTF]
[ 1.469930] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[ 1.471082] ata5.00: ATA Identify Device Log not supported
[ 1.471735] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20210730/psargs-330)
[ 1.471742] No Local Variables are initialized for Method [_GTF]
[ 1.471743] No Arguments are initialized for method [_GTF]
[ 1.471745] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20210730/psparse-529)
[ 1.472096] ata5.00: ATA Identify Device Log not supported
[ 4.927477] blk_update_request: I/O error, dev sr0, sector 2097136 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 4.927582] blk_update_request: I/O error, dev sr0, sector 2097136 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 4.927596] Buffer I/O error on dev sr0, logical block 2097136, async page read
[ 4.927629] blk_update_request: I/O error, dev sr0, sector 2097137 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 4.927637] Buffer I/O error on dev sr0, logical block 2097137, async page read
[ 4.927659] blk_update_request: I/O error, dev sr0, sector 2097138 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 4.927666] Buffer I/O error on dev sr0, logical block 2097138, async page read
[ 4.927687] blk_update_request: I/O error, dev sr0, sector 2097139 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 4.927694] Buffer I/O error on dev sr0, logical block 2097139, async page read
[ 4.927715] blk_update_request: I/O error, dev sr0, sector 2097140 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 4.927721] Buffer I/O error on dev sr0, logical block 2097140, async page read
[ 4.927742] blk_update_request: I/O error, dev sr0, sector 2097141 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 4.927748] Buffer I/O error on dev sr0, logical block 2097141, async page read
[ 4.927769] blk_update_request: I/O error, dev sr0, sector 2097142 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 4.927775] Buffer I/O error on dev sr0, logical block 2097142, async page read
[ 4.927798] blk_update_request: I/O error, dev sr0, sector 2097143 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 4.927804] Buffer I/O error on dev sr0, logical block 2097143, async page read
[ 4.955464] blk_update_request: I/O error, dev sr0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 4.955569] Buffer I/O error on dev sr0, logical block 0, async page read
[ 4.955605] Buffer I/O error on dev sr0, logical block 1, async page read
[ 6.514674] systemd-journald[353]: File /var/log/journal/e7d0df732b0649e49e97a4d764308014/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 6.782211] at24 0-0050: supply vcc not found, using dummy regulator
[ 7.194437] r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.962228] spl: loading out-of-tree module taints kernel.
[ 7.967391] znvpair: module license 'CDDL' taints kernel.
[ 7.967394] Disabling lock debugging due to kernel taint
[ 15.500611] VBoxNetFlt: Successfully started.
[ 15.508011] VBoxNetAdp: Successfully started.
[ 16.995355] kauditd_printk_skb: 17 callbacks suppressed
[ 30.398486] systemd-journald[353]: File /var/log/journal/e7d0df732b0649e49e97a4d764308014/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 81.828283] ntfs3: Unknown parameter 'windows_names'
[ 82.932232] ntfs3: Unknown parameter 'windows_names'
[ 111.268881] usb 3-4.3: Device not responding to setup address.
[ 111.476833] usb 3-4.3: Device not responding to setup address.
[ 111.684613] usb 3-4.3: device not accepting address 8, error -71
[ 176.415195] nouveau 0000:01:00.0: Direct firmware load for nouveau/nv106_fuc084 failed with error -2
[ 176.415211] nouveau 0000:01:00.0: Direct firmware load for nouveau/nv106_fuc084d failed with error -2
[ 176.415213] nouveau 0000:01:00.0: msvld: unable to load firmware data
[ 176.415217] nouveau 0000:01:00.0: msvld: init failed, -19
خروجی دستور دوم:
[left]
sudo dmesg | grep -Ei 'fw|firmware'
[ 0.135363] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.174307] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 9.424791] R8188EU: Firmware Version 11, SubVersion 1, Signature 0x88e1
[ 176.415195] nouveau 0000:01:00.0: Direct firmware load for nouveau/nv106_fuc084 failed with error -2
[ 176.415211] nouveau 0000:01:00.0: Direct firmware load for nouveau/nv106_fuc084d failed with error -2
[ 176.415213] nouveau 0000:01:00.0: msvld: unable to load firmware data
[ 248.318906] nouveau 0000:01:00.0: Direct firmware load for nouveau/nv106_fuc084 failed with error -2
[ 248.318921] nouveau 0000:01:00.0: Direct firmware load for nouveau/nv106_fuc084d failed with error -2
[ 248.318923] nouveau 0000:01:00.0: msvld: unable to load firmware data
[ 267.643403] [UFW BLOCK] IN=wlxc025e91d14cd OUT= MAC=c0:25:e9:1d:14:cd:8a:cb:db:7f:56:e5:86:dd SRC=2a01:5ec0:1002:d8b6:ade2:0f6a:8bd4:287f DST=2a01:5ec0:1002:d8b6:53e0:3232:be8c:495c LEN=72 TC=0 HOPLIMIT=254 FLOWLBL=0 PROTO=ICMPv6 TYPE=136 CODE=0
[ 276.646437] [UFW BLOCK] IN=wlxc025e91d14cd OUT= MAC=c0:25:e9:1d:14:cd:8a:cb:db:7f:56:e5:08:00 SRC=34.120.208.123 DST=192.168.13.204 LEN=1440 TOS=0x00 PREC=0x00 TTL=111 ID=21517 PROTO=TCP SPT=443 DPT=44174 WINDOW=261 RES=0x00 ACK URGP=0
[/left]یه خورده تازه کارم نمی دونم باید چکار کنم اگر میشه راهنمایی کنید
موضوع: لینوکس مینت و رفتار دوگانه روی دو رایانه ی جدا (دفعات بازدید: 1282 بار)
