مشکل اتصال وای فای

[gem]

سلام، من با دانگل وای فای به نت خونه وصل میشم، تو توزیع های لینوکسی درایور شو خودم دستی نصب میکنم.
تو دبیان ۱۲ بعداز نصب وصل میشم ولی سیستم رو که ریستارت میکنم سیستم به وای فای وصل نمیشه باز باید مراحل نصب درایور رو انجام بدم تا وصل شم به نت

کد: [انتخاب]

Realtek rtl8192eu official Linux driver, versions:
rtl8192eu-linux-5.11.2.1

Manual install:

sudo rmmod 8192eu
sudo rmmod rtl8xxxu
sudo dkms remove -m rtl8192eu -v 1.0

Run add and install commands from driver directory:

sudo cp -ar . /usr/src/rtl8192eu-1.0
sudo dkms add -m rtl8192eu -v 1.0
sudo dkms install -m rtl8192eu -v 1.0

Load driver (or reboot):

sudo modprobe 8192euممنونم از پاسختون

[aFard]

سلام
خروجی دستور زیر را بزارید

کد: [انتخاب]

lspci -v | grep module


[thmkhtry]

راه دور زدنش اینه که یه اسکریپت بنویسید که این کارو براتون انجام بده و این اسکریپت رو بذارید خود به خود اجرا شه موقع روشن کردن

[gem]

سلام
خروجی دستور زیر را بزارید

کد: [انتخاب]

lspci -v | grep module


ممنونم، با ویرایش کردن این فایل (Makefile) اوکی شد

کد: [انتخاب]

EXTRA_CFLAGS += -O1
#EXTRA_CFLAGS += -O3
#EXTRA_CFLAGS += -Wall
#EXTRA_CFLAGS += -Wextra
#EXTRA_CFLAGS += -Werror
#EXTRA_CFLAGS += -pedantic
#EXTRA_CFLAGS += -Wshadow -Wpointer-arith -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes

EXTRA_CFLAGS += -Wno-unused-variable
#EXTRA_CFLAGS += -Wno-unused-value
#EXTRA_CFLAGS += -Wno-unused-label
#EXTRA_CFLAGS += -Wno-unused-parameter
#EXTRA_CFLAGS += -Wno-unused-function
#EXTRA_CFLAGS += -Wno-unused
#EXTRA_CFLAGS += -Wno-uninitialized

GCC_VER_49 := $(shell echo `$(CC) -dumpversion | cut -f1-2 -d.` \>= 4.9 | `which bc` )
ifeq ($(GCC_VER_49),1)
EXTRA_CFLAGS += -Wno-date-time # Fix compile error && warning on gcc 4.9 and later
endif

EXTRA_CFLAGS += -I$(src)/include

EXTRA_LDFLAGS += --strip-debug

CONFIG_AUTOCFG_CP = n

########################## WIFI IC ############################
CONFIG_MULTIDRV = n
CONFIG_RTL8188E = n
CONFIG_RTL8812A = n
CONFIG_RTL8821A = n
CONFIG_RTL8192E = y
CONFIG_RTL8723B = n
CONFIG_RTL8814A = n
CONFIG_RTL8723C = n
CONFIG_RTL8188F = n
CONFIG_RTL8188GTV = n
CONFIG_RTL8822B = n
CONFIG_RTL8723D = n
CONFIG_RTL8821C = n
CONFIG_RTL8710B = n
CONFIG_RTL8192F = n
CONFIG_RTL8822C = n
CONFIG_RTL8814B = n
######################### Interface ###########################
CONFIG_USB_HCI = y
CONFIG_PCI_HCI = n
CONFIG_SDIO_HCI = n
CONFIG_GSPI_HCI = n
########################## Features ###########################
CONFIG_AP_MODE = y
CONFIG_P2P = y
CONFIG_MP_INCLUDED = y
CONFIG_POWER_SAVING = y
CONFIG_IPS_MODE = default
CONFIG_LPS_MODE = default
CONFIG_USB_AUTOSUSPEND = n
CONFIG_HW_PWRP_DETECTION = n
CONFIG_BT_COEXIST = y
CONFIG_WAPI_SUPPORT = n
CONFIG_EFUSE_CONFIG_FILE = y
CONFIG_EXT_CLK = n
CONFIG_TRAFFIC_PROTECT = n
CONFIG_LOAD_PHY_PARA_FROM_FILE = y
CONFIG_TXPWR_BY_RATE = y
CONFIG_TXPWR_BY_RATE_EN = n
CONFIG_TXPWR_LIMIT = y
CONFIG_TXPWR_LIMIT_EN = n
CONFIG_RTW_CHPLAN = 0xFF
CONFIG_RTW_ADAPTIVITY_EN = disable
CONFIG_RTW_ADAPTIVITY_MODE = normal
CONFIG_SIGNAL_SCALE_MAPPING = n
CONFIG_80211W = y
CONFIG_REDUCE_TX_CPU_LOADING = n
CONFIG_BR_EXT = y
CONFIG_TDLS = n
CONFIG_WIFI_MONITOR = y
CONFIG_MCC_MODE = n
CONFIG_APPEND_VENDOR_IE_ENABLE = n
CONFIG_RTW_NAPI = y
CONFIG_RTW_GRO = y
CONFIG_RTW_NETIF_SG = y
CONFIG_RTW_IPCAM_APPLICATION = n
CONFIG_RTW_REPEATER_SON = n
CONFIG_ICMP_VOQ = n
CONFIG_IP_R_MONITOR = n #arp VOQ and high rate
# user priority mapping rule : tos, dscp
CONFIG_RTW_UP_MAPPING_RULE = tos
CONFIG_RTW_MBO = n
# AMSDU in security network
CONFIG_SEC_AMSDU_MODE = non-spp
########################## Android ###########################
# CONFIG_RTW_ANDROID - 0: no Android, 4/5/6/7/8/9/10/11 : Android version
CONFIG_RTW_ANDROID = 0

ifeq ($(shell test $(CONFIG_RTW_ANDROID) -gt 0; echo $$?), 0)
EXTRA_CFLAGS += -DCONFIG_RTW_ANDROID=$(CONFIG_RTW_ANDROID)
endif

########################## Debug ###########################
CONFIG_RTW_DEBUG = n
# default log level is _DRV_INFO_ = 4,
# please refer to "How_to_set_driver_debug_log_level.doc" to set the available level.
CONFIG_RTW_LOG_LEVEL = 4

# enable /proc/net/rtlxxxx/ debug interfaces
CONFIG_PROC_DEBUG = y

######################## Wake On Lan ##########################
CONFIG_WOWLAN = n
#bit2: deauth, bit1: unicast, bit0: magic pkt.
CONFIG_WAKEUP_TYPE = 0x7
CONFIG_WOW_LPS_MODE = default
#bit0: disBBRF off, #bit1: Wireless remote controller (WRC)
CONFIG_SUSPEND_TYPE = 0
CONFIG_WOW_STA_MIX = n
CONFIG_GPIO_WAKEUP = n
# Please contact with RTK support team first. After getting the agreement from RTK support team,
# you are just able to modify the CONFIG_WAKEUP_GPIO_IDX with customized requirement.
CONFIG_WAKEUP_GPIO_IDX = default
CONFIG_HIGH_ACTIVE_DEV2HST = n
######### only for USB #########
CONFIG_ONE_PIN_GPIO = n
CONFIG_HIGH_ACTIVE_HST2DEV = n
CONFIG_PNO_SUPPORT = n
CONFIG_PNO_SET_DEBUG = n
CONFIG_AP_WOWLAN = n
######### Notify SDIO Host Keep Power During Syspend ##########
CONFIG_RTW_SDIO_PM_KEEP_POWER = y
###################### MP HW TX MODE FOR VHT #######################
CONFIG_MP_VHT_HW_TX_MODE = n
###################### Platform Related #######################
CONFIG_PLATFORM_I386_PC = y
CONFIG_PLATFORM_ARM_YOCTO = n
CONFIG_PLATFORM_ARM_AARCH64 = n
CONFIG_PLATFORM_ARM_RPI = n
CONFIG_PLATFORM_ANDROID_X86 = n
CONFIG_PLATFORM_ANDROID_INTEL_X86 = n
CONFIG_PLATFORM_JB_X86 = n
CONFIG_PLATFORM_ARM_S3C2K4 = n
CONFIG_PLATFORM_ARM_PXA2XX = n
CONFIG_PLATFORM_ARM_S3C6K4 = n
CONFIG_PLATFORM_MIPS_RMI = n
CONFIG_PLATFORM_RTD2880B = n
CONFIG_PLATFORM_MIPS_AR9132 = n
CONFIG_PLATFORM_RTK_DMP = n
CONFIG_PLATFORM_MIPS_PLM = n
CONFIG_PLATFORM_MSTAR389 = n
CONFIG_PLATFORM_MT53XX = n
CONFIG_PLATFORM_ARM_MX51_241H = n
CONFIG_PLATFORM_FS_MX61 = n
CONFIG_PLATFORM_ACTIONS_ATJ227X = n
CONFIG_PLATFORM_TEGRA3_CARDHU = n
CONFIG_PLATFORM_TEGRA4_DALMORE = n
CONFIG_PLATFORM_ARM_TCC8900 = n
CONFIG_PLATFORM_ARM_TCC8920 = n
CONFIG_PLATFORM_ARM_TCC8920_JB42 = n
CONFIG_PLATFORM_ARM_TCC8930_JB42 = n
CONFIG_PLATFORM_ARM_RK2818 = n
CONFIG_PLATFORM_ARM_RK3066 = n
CONFIG_PLATFORM_ARM_RK3188 = n
CONFIG_PLATFORM_ARM_URBETTER = n
CONFIG_PLATFORM_ARM_TI_PANDA = n
CONFIG_PLATFORM_MIPS_JZ4760 = n
CONFIG_PLATFORM_DMP_PHILIPS = n
CONFIG_PLATFORM_MSTAR_TITANIA12 = n
CONFIG_PLATFORM_MSTAR = n
CONFIG_PLATFORM_SZEBOOK = n
CONFIG_PLATFORM_ARM_SUNxI = n
CONFIG_PLATFORM_ARM_SUN6I = n
CONFIG_PLATFORM_ARM_SUN7I = n
CONFIG_PLATFORM_ARM_SUN8I_W3P1 = n
CONFIG_PLATFORM_ARM_SUN8I_W5P1 = n
CONFIG_PLATFORM_ACTIONS_ATM702X = n
CONFIG_PLATFORM_ACTIONS_ATV5201 = n
CONFIG_PLATFORM_ACTIONS_ATM705X = n
CONFIG_PLATFORM_ARM_SUN50IW1P1 = n
CONFIG_PLATFORM_ARM_RTD299X = n
CONFIG_PLATFORM_ARM_LGE = n
CONFIG_PLATFORM_ARM_SPREADTRUM_6820 = n
CONFIG_PLATFORM_ARM_SPREADTRUM_8810 = n
CONFIG_PLATFORM_ARM_WMT = n
CONFIG_PLATFORM_TI_DM365 = n
CONFIG_PLATFORM_MOZART = n
CONFIG_PLATFORM_RTK119X = n
CONFIG_PLATFORM_RTK119X_AM = n
CONFIG_PLATFORM_RTK129X = n
CONFIG_PLATFORM_RTK1319 = n
CONFIG_PLATFORM_RTK390X = n
CONFIG_PLATFORM_NOVATEK_NT72668 = n
CONFIG_PLATFORM_HISILICON = n
CONFIG_PLATFORM_HISILICON_HI3798 = n
CONFIG_PLATFORM_NV_TK1 = n
CONFIG_PLATFORM_NV_TK1_UBUNTU = n
CONFIG_PLATFORM_RTL8197D = n
CONFIG_PLATFORM_AML_S905 = n
CONFIG_PLATFORM_ZTE_ZX296716 = n
########### CUSTOMER ################################
CONFIG_CUSTOMER_HUAWEI_GENERAL = n

CONFIG_DRVEXT_MODULE = n

export TopDIR ?= $(shell pwd)

########### COMMON  #################################
ifeq ($(CONFIG_GSPI_HCI), y)
HCI_NAME = gspi
endif

ifeq ($(CONFIG_SDIO_HCI), y)
HCI_NAME = sdio
endif

ifeq ($(CONFIG_USB_HCI), y)
HCI_NAME = usb
endif

ifeq ($(CONFIG_PCI_HCI), y)
HCI_NAME = pci
endif


_OS_INTFS_FILES := os_dep/osdep_service.o \
os_dep/linux/os_intfs.o \
os_dep/linux/$(HCI_NAME)_intf.o \
os_dep/linux/$(HCI_NAME)_ops_linux.o \
os_dep/linux/ioctl_linux.o \
os_dep/linux/xmit_linux.o \
os_dep/linux/mlme_linux.o \
os_dep/linux/recv_linux.o \
os_dep/linux/ioctl_cfg80211.o \
os_dep/linux/rtw_cfgvendor.o \
os_dep/linux/wifi_regd.o \
os_dep/linux/rtw_android.o \
os_dep/linux/rtw_proc.o \
os_dep/linux/nlrtw.o \
os_dep/linux/rtw_rhashtable.o

ifeq ($(CONFIG_MP_INCLUDED), y)
_OS_INTFS_FILES += os_dep/linux/ioctl_mp.o
endif

ifeq ($(CONFIG_SDIO_HCI), y)
_OS_INTFS_FILES += os_dep/linux/custom_gpio_linux.o
_OS_INTFS_FILES += os_dep/linux/$(HCI_NAME)_ops_linux.o
endif

ifeq ($(CONFIG_GSPI_HCI), y)
_OS_INTFS_FILES += os_dep/linux/custom_gpio_linux.o
_OS_INTFS_FILES += os_dep/linux/$(HCI_NAME)_ops_linux.o
endif


_HAL_INTFS_FILES := hal/hal_intf.o \
hal/hal_com.o \
hal/hal_com_phycfg.o \
hal/hal_phy.o \
hal/hal_dm.o \
hal/hal_dm_acs.o \
hal/hal_btcoex_wifionly.o \
hal/hal_btcoex.o \
hal/hal_mp.o \
hal/hal_mcc.o \
hal/hal_hci/hal_$(HCI_NAME).o \
hal/led/hal_led.o \
hal/led/hal_$(HCI_NAME)_led.o


EXTRA_CFLAGS += -I$(src)/platform
_PLATFORM_FILES := platform/platform_ops.o

EXTRA_CFLAGS += -I$(src)/hal/btc

########### HAL_RTL8188E #################################
ifeq ($(CONFIG_RTL8188E), y)

RTL871X = rtl8188e
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8189es
endif

ifeq ($(CONFIG_GSPI_HCI), y)
MODULE_NAME = 8189es
endif

ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8188eu
endif

ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8188ee
endif
EXTRA_CFLAGS += -DCONFIG_RTL8188E

_HAL_INTFS_FILES += hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8188EPwrSeq.o\
  hal/$(RTL871X)/$(RTL871X)_xmit.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o

_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/hal8188e_s_fw.o \
hal/$(RTL871X)/hal8188e_t_fw.o \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_recv.o

ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
else
ifeq ($(CONFIG_GSPI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
endif
endif

ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8188E_USB.o
endif
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8188E_PCIE.o
endif
ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8188E_SDIO.o
endif

endif

########### HAL_RTL8192E #################################
ifeq ($(CONFIG_RTL8192E), y)

RTL871X = rtl8192e
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8192es
endif

ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8192eu
endif

ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8192ee
endif
EXTRA_CFLAGS += -DCONFIG_RTL8192E
_HAL_INTFS_FILES += hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8192EPwrSeq.o\
hal/$(RTL871X)/$(RTL871X)_xmit.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o

_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/hal8192e_fw.o \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_recv.o

ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
else
ifeq ($(CONFIG_GSPI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
endif
endif

ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8192E_USB.o
endif
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8192E_PCIE.o
endif
ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8192E_SDIO.o
endif

ifeq ($(CONFIG_BT_COEXIST), y)
_BTC_FILES += hal/btc/halbtc8192e1ant.o \
hal/btc/halbtc8192e2ant.o
endif

endif

########### HAL_RTL8812A_RTL8821A #################################

ifneq ($(CONFIG_RTL8812A)_$(CONFIG_RTL8821A), n_n)

RTL871X = rtl8812a
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8812au
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8812ae
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8812as
endif

_HAL_INTFS_FILES +=  hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8812PwrSeq.o \
hal/$(RTL871X)/Hal8821APwrSeq.o\
hal/$(RTL871X)/$(RTL871X)_xmit.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o

_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_recv.o

ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
else
ifeq ($(CONFIG_GSPI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
endif
endif

ifeq ($(CONFIG_RTL8812A), y)
ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8812A_USB.o
endif
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8812A_PCIE.o
endif
endif
ifeq ($(CONFIG_RTL8821A), y)
ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8821A_USB.o
endif
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8821A_PCIE.o
endif
ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8821A_SDIO.o
endif
endif

ifeq ($(CONFIG_RTL8812A), y)
EXTRA_CFLAGS += -DCONFIG_RTL8812A
_HAL_INTFS_FILES += hal/rtl8812a/hal8812a_fw.o
endif

ifeq ($(CONFIG_RTL8821A), y)

ifeq ($(CONFIG_RTL8812A), n)

RTL871X = rtl8821a
ifeq ($(CONFIG_USB_HCI), y)
ifeq ($(CONFIG_BT_COEXIST), y)
MODULE_NAME := 8821au
else
MODULE_NAME := 8811au
endif
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME := 8821ae
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME := 8821as
endif

endif

EXTRA_CFLAGS += -DCONFIG_RTL8821A

_HAL_INTFS_FILES += hal/rtl8812a/hal8821a_fw.o

endif

ifeq ($(CONFIG_BT_COEXIST), y)
ifeq ($(CONFIG_RTL8812A), y)
_BTC_FILES += hal/btc/halbtc8812a1ant.o \
hal/btc/halbtc8812a2ant.o
endif
ifeq ($(CONFIG_RTL8821A), y)
_BTC_FILES += hal/btc/halbtc8821a1ant.o \
hal/btc/halbtc8821a2ant.o
endif
endif

endif

########### HAL_RTL8723B #################################
ifeq ($(CONFIG_RTL8723B), y)

RTL871X = rtl8723b
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8723bu
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8723be
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8723bs
endif

EXTRA_CFLAGS += -DCONFIG_RTL8723B

_HAL_INTFS_FILES += hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8723BPwrSeq.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o

_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/hal8723b_fw.o

_HAL_INTFS_FILES += \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_recv.o

ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
endif

ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8723B_USB.o
endif
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8723B_PCIE.o
endif
ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8723B_SDIO.o
endif

_BTC_FILES += hal/btc/halbtc8723bwifionly.o
ifeq ($(CONFIG_BT_COEXIST), y)
_BTC_FILES += hal/btc/halbtc8723b1ant.o \
hal/btc/halbtc8723b2ant.o
endif

endif

########### HAL_RTL8814A #################################
ifeq ($(CONFIG_RTL8814A), y)
## ADD NEW VHT MP HW TX MODE ##
#EXTRA_CFLAGS += -DCONFIG_MP_VHT_HW_TX_MODE
#CONFIG_MP_VHT_HW_TX_MODE = y
##########################################
RTL871X = rtl8814a
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8814au
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8814ae
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8814as
endif

EXTRA_CFLAGS += -DCONFIG_RTL8814A

_HAL_INTFS_FILES +=  hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8814PwrSeq.o \
hal/$(RTL871X)/$(RTL871X)_xmit.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o

_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/hal8814a_fw.o


_HAL_INTFS_FILES += \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_recv.o

ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
else
ifeq ($(CONFIG_GSPI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
endif
endif

ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8814A_USB.o
endif
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8814A_PCIE.o
endif

ifeq ($(CONFIG_BT_COEXIST), y)
_BTC_FILES += hal/btc/halbtc8814a2ant.o
endif
endif

########### HAL_RTL8723C #################################
ifeq ($(CONFIG_RTL8723C), y)

RTL871X = rtl8703b
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8723cu
MODULE_SUB_NAME = 8703bu
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8723ce
MODULE_SUB_NAME = 8703be
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8723cs
MODULE_SUB_NAME = 8703bs
endif

EXTRA_CFLAGS += -DCONFIG_RTL8703B

_HAL_INTFS_FILES += hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8703BPwrSeq.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o

_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/hal8703b_fw.o

_HAL_INTFS_FILES += \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_SUB_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_SUB_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_SUB_NAME)_recv.o

ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
endif

ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8703B_USB.o
endif
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8703B_PCIE.o
endif

ifeq ($(CONFIG_BT_COEXIST), y)
_BTC_FILES += hal/btc/halbtc8703b1ant.o
endif

endif

########### HAL_RTL8723D #################################
ifeq ($(CONFIG_RTL8723D), y)

RTL871X = rtl8723d
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8723du
MODULE_SUB_NAME = 8723du
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8723de
MODULE_SUB_NAME = 8723de
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8723ds
MODULE_SUB_NAME = 8723ds
endif

EXTRA_CFLAGS += -DCONFIG_RTL8723D

_HAL_INTFS_FILES += hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8723DPwrSeq.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o

_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/hal8723d_fw.o \
hal/$(RTL871X)/$(RTL871X)_lps_poff.o


_HAL_INTFS_FILES += \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_SUB_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_SUB_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_SUB_NAME)_recv.o

ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
endif

ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8723D_USB.o
endif
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8723D_PCIE.o
endif

ifeq ($(CONFIG_BT_COEXIST), y)
_BTC_FILES += hal/btc/halbtc8723d1ant.o \
hal/btc/halbtc8723d2ant.o
endif

endif

########### HAL_RTL8188F #################################
ifeq ($(CONFIG_RTL8188F), y)

RTL871X = rtl8188f
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8188fu
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8188fe
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8189fs
endif

EXTRA_CFLAGS += -DCONFIG_RTL8188F

_HAL_INTFS_FILES += hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8188FPwrSeq.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o

_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/hal8188f_fw.o

_HAL_INTFS_FILES += \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_recv.o

ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
endif

ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8188F_USB.o
endif

ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8188F_SDIO.o
endif

endif

########### HAL_RTL8188GTV #################################
ifeq ($(CONFIG_RTL8188GTV), y)

RTL871X = rtl8188gtv
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8188gtvu
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8189gtvs
endif

EXTRA_CFLAGS += -DCONFIG_RTL8188GTV

_HAL_INTFS_FILES += hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8188GTVPwrSeq.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o

_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/hal8188gtv_fw.o

_HAL_INTFS_FILES += \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_recv.o

ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
endif

ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8188GTV_USB.o
endif

ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8188GTV_SDIO.o
endif

endif

########### HAL_RTL8822B #################################
ifeq ($(CONFIG_RTL8822B), y)
RTL871X := rtl8822b
ifeq ($(CONFIG_USB_HCI), y)
ifeq ($(CONFIG_BT_COEXIST), n)
MODULE_NAME = 8812bu
else
MODULE_NAME = 88x2bu
endif
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 88x2be
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 88x2bs
endif

endif
########### HAL_RTL8821C #################################
ifeq ($(CONFIG_RTL8821C), y)
RTL871X := rtl8821c
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8821cu
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8821ce
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8821cs
endif

endif

########### HAL_RTL8710B #################################
ifeq ($(CONFIG_RTL8710B), y)

RTL871X = rtl8710b
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8710bu
MODULE_SUB_NAME = 8710bu
endif

EXTRA_CFLAGS += -DCONFIG_RTL8710B

_HAL_INTFS_FILES += hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8710BPwrSeq.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o

_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/hal8710b_fw.o \
hal/$(RTL871X)/$(RTL871X)_lps_poff.o


_HAL_INTFS_FILES += \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_SUB_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_SUB_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_SUB_NAME)_recv.o

_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o

ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8710B_USB.o
endif

endif

########### HAL_RTL8192F #################################
ifeq ($(CONFIG_RTL8192F), y)

RTL871X = rtl8192f
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8192fu
MODULE_SUB_NAME = 8192fu
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8192fe
MODULE_SUB_NAME = 8192fe
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8192fs
MODULE_SUB_NAME = 8192fs
endif

EXTRA_CFLAGS += -DCONFIG_RTL8192F

_HAL_INTFS_FILES += hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8192FPwrSeq.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o

_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/hal8192f_fw.o \
hal/$(RTL871X)/$(RTL871X)_lps_poff.o


_HAL_INTFS_FILES += \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_SUB_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_SUB_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_SUB_NAME)_recv.o

ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
endif

ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES += hal/efuse/$(RTL871X)/HalEfuseMask8192F_SDIO.o
endif

ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES += hal/efuse/$(RTL871X)/HalEfuseMask8192F_USB.o
endif

ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES += hal/efuse/$(RTL871X)/HalEfuseMask8192F_PCIE.o
endif

ifeq ($(CONFIG_BT_COEXIST), y)
_BTC_FILES += hal/btc/halbtccommon.o \
hal/btc/halbtc8192f.o
endif

endif

########### HAL_RTL8822C #################################
ifeq ($(CONFIG_RTL8822C), y)
RTL871X := rtl8822c
ifeq ($(CONFIG_USB_HCI), y)
ifeq ($(CONFIG_BT_COEXIST), n)
MODULE_NAME = 8812cu
else
MODULE_NAME = 88x2cu
endif
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 88x2ce
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 88x2cs
endif

endif

########### HAL_RTL8814B #################################

[gem]

راه دور زدنش اینه که یه اسکریپت بنویسید که این کارو براتون انجام بده و این اسکریپت رو بذارید خود به خود اجرا شه موقع روشن کردن

ممنونم، بله میشد اون دستوراتو وارد اسکریپت کرد و موقع بالا اومدن سیستم اجرا بشه، (با ویرایش کردن فایل(Makefile) مشکل حل شد)

[Dragon-]

چرا انقدر کار رو سخت می‌کنید؟ لازم نیست هربار که کامپیوتر روشن میشه، اون ماژول رو کامپایل کنید.
احتمالا هر بار که کامپیوتر رو خاموش و روشن می‌کنید، ماژولی که همراه کرنل هست بارگذاری میشه (که از وایفای شما پشتیبانی نمی‌کنه)
با پیکربندی درست modprobe این مشکل باید راحت حل بشه.