سلام
wireless من MT7601 هستش و هنگام اولین بوت سیستم به نام wlx00e1290074e شناسایی میشه و زمانیکه من دستور”nmcli device wifi list” یا connect رو استفاده میکنم نه میتونم list wifi ها رو ببینم نه میتونم بهشون وصل شم
ولی وقتی دیوایس رو به صورت داغ قط میکنم و دوباره وصل میکنم به نام wlan0 شناسایی میشه و میتونم هم لیست وای فای ها رو ببینم و هم بهشون وصل شم
من فهمیدم که بار اول که سیستم بوت میشه میاد اسم رو از wlan0 تغییر میده wlx00e1290074e ولی نمیتونم بفهمم که این تغییر اسم اصلا ربطی توی کار کردنش یا نکردنش داره یا نه ؟!
لیستی از خروجی دستوراتی که ذهنم میرسه رو میزارم که کار یکم راحت تر پیش بره
برای زمانیکه که به اسم wlx00e1290074eb شناسایی میشه و کار نمیکنه : dmesg
[ 7.802829] intel_rapl_common: Found RAPL domain package
[ 7.802834] intel_rapl_common: Found RAPL domain core
[ 7.802839] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 7.952567] mt7601u 2-2:1.0: ASIC revision: 76010001 MAC revision: 76010500
[ 7.955450] mt7601u 2-2:1.0: firmware: direct-loading firmware mt7601u.bin
[ 7.955459] mt7601u 2-2:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
[ 8.023548] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: none.
[ 8.379459] mt7601u 2-2:1.0: EEPROM ver:0d fae:00
[ 8.594409] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.594953] usbcore: registered new interface driver mt7601u
[ 8.601741] mt7601u 2-2:1.0 wlx00e1290074eb: renamed from wlan0
[ 9.136658] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Quota mode: none
مثلا اینجا رو نگا کنین :
[ 8.601741] mt7601u 2-2:1.0 wlx00e1290074eb: renamed from wlan0
این داره تغییر اسم میده به wlx00e1290074eb درسته؟ و اینکه توی لاگ اگه نگا کنین کرنل حتی بعد اون اسم از wlx00e1290074eb هم حتی نمیاره در حالی که توی لاگ بعدی نشون میده که wlan0 داره کا میکنه و ...
زمانی که یبار قط کردمشو و وصلش کردم و کار میکنه : dmesg
[ 866.069107] wlx00e1290074eb: deauthenticated from e2:bb:29:47:09:6e (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[ 901.372122] usb 2-2: USB disconnect, device number 3
[ 901.404266] mt7601u 2-2:1.0: Warning: TX DMA did not stop!
[ 905.428235] mt7601u 2-2:1.0: Warning: MAC TX did not stop!
[ 907.832241] mt7601u 2-2:1.0: Warning: MAC RX did not stop!
[ 907.832249] mt7601u 2-2:1.0: Warning: RX DMA did not stop!
[ 908.148239] usb 2-2: new high-speed USB device number 4 using xhci_hcd
[ 908.375185] usb 2-2: New USB device found, idVendor=148f, idProduct=7601, bcdDevice= 0.00
[ 908.375194] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 908.375197] usb 2-2: Product: 802.11 n WLAN
[ 908.375200] usb 2-2: Manufacturer: MediaTek
[ 908.375202] usb 2-2: SerialNumber: 1.0
[ 908.585600] usb 2-2: reset high-speed USB device number 4 using xhci_hcd
[ 908.805256] mt7601u 2-2:1.0: ASIC revision: 76010001 MAC revision: 76010500
[ 908.805942] mt7601u 2-2:1.0: firmware: direct-loading firmware mt7601u.bin
[ 908.805950] mt7601u 2-2:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
[ 908.889651] kauditd_printk_skb: 30 callbacks suppressed
[ 908.889655] audit: type=1400 audit(1694689972.425:103): apparmor="DENIED" operation="capable" profile="/{,u
sr/}sbin/dhclient" pid=23324 comm="dhclient" capability=16 capname="sys_module"
[ 909.212925] mt7601u 2-2:1.0: EEPROM ver:0d fae:00
[ 909.420415] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 910.899015] wlan0: authenticate with 2c:c8:1b:66:f7:af
[ 910.914878] wlan0: send auth to 2c:c8:1b:66:f7:af (try 1/3)
[ 910.918591] wlan0: authenticated
[ 910.920205] wlan0: associate with 2c:c8:1b:66:f7:af (try 1/3)
[ 910.933187] wlan0: RX AssocResp from 2c:c8:1b:66:f7:af (capab=0x421 status=0 aid=6)
[ 910.975121] wlan0: associated
[ 910.975660] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 954.932988] wlan0: deauthenticating from 2c:c8:1b:66:f7:af by local choice (Reason: 3=DEAUTH_LEAVING)
[ 956.488911] wlan0: authenticate with e2:bb:29:47:09:6e
[ 956.515803] wlan0: send auth to e2:bb:29:47:09:6e (try 1/3)
[ 956.518661] wlan0: authenticated
[ 956.520219] wlan0: associate with e2:bb:29:47:09:6e (try 1/3)
[ 956.526853] wlan0: RX AssocResp from e2:bb:29:47:09:6e (capab=0x411 status=0 aid=1)
[ 956.566827] wlan0: associated
[ 956.649133] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
کل لاگ ها در پیوست dmesg
خروجی دستور lsusb :
Bus 003 Device 003: ID 10c4:8108 Silicon Labs USB OPTICAL MOUSE
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
Bus 002 Device 002: ID 1a2c:0e24 China Resource Semico Co., Ltd USB Keyboard
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
مشخصات سیستم در لینوکس hardware
https://linux-hardware.org/?probe=cf48b0b959 اگه اطلاعات یا کاری خواستید برای نشونه های بیشتر در خدمتم