سلام به دوستان گل . اگر کسی راخ حلی برای این مشکل داره بفرماید . من قبلا توی اوبونتو مودم دیال آپم رو مثل پشمک نصب میکردم ، اما حالا توی اپن سوزه 11.2 به سختی مودم نصب شد ، اما چون pppconfig نداره و من هم برای سوزه این ابزار رو پیدار نکردم به wvdial متوصل شدم که همونطور که میبینید دست رد به سینه ما زده . اگه کسی روشی داره همینجوری راه حلش رو بگه و اگر نه اگه کسی بسته rpm یا سورس pppconfig رو داره به ما بده و گرنه برگردی همون اوبونتو . ممنون .
///****** wvdialconf /etc/wvdial.conf *********///
rclord-pc:~ # wvdialconf /etc/wvdial.conf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: Scanning ttySHSF0 first, /dev/modem is a link to it.
ttySHSF0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttySHSF0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttySHSF0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3 S4 S5 S6 S7 SHSF1
Modem Port Scan<*1>: SHSF2 SHSF3 SHSF4 SHSF5 SHSF6 SHSF7
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wiki/?WvDial
If you still have problems, send mail to <wvdial-list@lists.nit.ca>.
///****** wvdialconf *********///
rclord-pc:~ # wvdialconf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: Scanning ttySHSF0 first, /dev/modem is a link to it.
ttySHSF0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttySHSF0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttySHSF0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3 S4 S5 S6 S7 SHSF1
Modem Port Scan<*1>: SHSF2 SHSF3 SHSF4 SHSF5 SHSF6 SHSF7
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wiki/?WvDial
If you still have problems, send mail to <wvdial-list@lists.nit.ca>.
///****** wvdial *********///
rclord-pc:~ # wvdial
--> WvDial: Internet dialer version 1.60
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.
rclord-pc:~ #
///*********** WVDIALCONF *************///
[Dialer Defaults]
Modem = /dev/modem
Baud = 57600
Init = ATZ
Init2 = AT S11=50
Phone = 9092303205
Username =
Password =
[Dialer phone2]
Phone = 9092303201
[Dialer shh]
Init3 = ATM0
[Dialer pulse]
Dial Command = ATDP
///**************************************///
موضوع: راهنمای جامع نصب مودم و برقراری اتصال به اینترنت (دفعات بازدید: 204860 بار)
