تشکر از همه:
مدل لپ تاپ: Dell Vostro 1400
تعداد تغیرات زیاد بود!!!
این خروجی:
#sudo smartctl -a /dev/sda | grep Load_Cycle_Count
193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 6269
#sudo smartctl -a /dev/sda | grep Load_Cycle_Count
193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 6274
soroush@soroush-laptop:~$ sudo smartctl -a /dev/sda | grep Load_Cycle_Count
193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 6291
بعدش از ۲۵۴ استفاده کردم (راهی که lomion عزیز نوشتن):
-فقط برای هر بوت این خروجی رو میده بعد از زدن دستور:soroush@soroush-laptop:~$ sudo update-rc.d hdparm defaults
update-rc.d: /etc/init.d/hdparm: file does not exist
مشکلی نیست؟؟؟
ولی در کل بعد از تمام شدن مراحل عدد افزایش پیدا نکرد!!!
soroush@soroush-laptop:~$ sudo smartctl -a /dev/sda | grep Load_Cycle_Count
193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 6291
و اینم خروجی این دستور:
soroush@soroush-laptop:~$ sudo smartctl -d ata -a /dev/sda
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio family
Device Model: WDC WD1200BEVS-75UST0
Serial Number: WD-WXC408567161
Firmware Version: 01.01A01
User Capacity: 120,034,123,776 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Mon Sep 1 19:55:24 2008 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (4800) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 60) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 1
3 Spin_Up_Time 0x0003 161 159 021 Pre-fail Always - 950
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 254
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 100 253 051 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 358
10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 232
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 29
193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 6291
194 Temperature_Celsius 0x0022 106 097 000 Old_age Always - 37
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 051 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 266 -
# 2 Short offline Completed without error 00% 1 -
# 3 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
حله یا باید کاره دیگه ای هم انجام داد؟؟؟