سلام .
اسکن مودم میگه Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.24-16-generic 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: 
http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at 
http://www.linmodems.org --------------------------  System information ----------------------------
CPU=i686,  
Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008
 scanModem update of:  2008_07_25
 There are no blacklisted modem drivers in /etc/modprobe*  files 
Attached USB devices are:
 ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09
 ID 1241:1166 Belkin optical mouse w/ scrollwheel
USB modems not recognized
For candidate card in slot 00:0d.0, firmware information and bootup diagnostics are:
 PCI slot   PCI ID      SubsystemID   Name
 ----------   ---------   ---------   --------------
 00:0d.0   14f1:2f00   14f1:2003   Communication controller: Conexant HSF 56k HSFi Modem 
 Modem interrupt assignment and sharing: 
 --- Bootup diagnostics for card in PCI slot 00:0d.0 ----
For candidate card in slot 00:11.6, firmware information and bootup diagnostics are:
 PCI slot   PCI ID      SubsystemID   Name
 ----------   ---------   ---------   --------------
 00:11.6   1106:3068      Communication controller: VIA Technologies, Inc. AC'97 Modem Controller 
 Modem interrupt assignment and sharing: 
 20:        440   IO-APIC-fasteoi   VIA8237
 --- Bootup diagnostics for card in PCI slot 00:11.6 ----
[   43.078213] PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
[   43.078227] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 20
[   43.828360] PCI: Setting latency timer of device 0000:00:11.6 to 64
[   44.331815] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[   44.331838] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
 The PCI slot 00:11.6 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
 if help is needed. 
PCIbus=00:11.6
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
   Flags: medium devsel, IRQ 20
   I/O ports at 1000 [size=256]
   Capabilities: <access denied>
===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== 
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.16.
The modem cards detected by "aplay -l"  are: None
The /proc/asound/pcm file reports:
-----------------------
01-00: SAA7134 PCM : SAA7134 PCM : capture 1
00-01: VIA 8237 : VIA 8237 : playback 1 : capture 1
00-00: VIA 8237 : VIA 8237 : playback 4 : capture 1
about /proc/asound/cards:
------------------------
 0 [V8237          ]: VIA8237 - VIA 8237
                      VIA 8237 with AD1980 at 0xc400, irq 20
 1 [SAA7134        ]: SAA7134 - SAA7134
                      saa7133[0] at 0xdfc00000 irq 19
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:0d.0:
   Modem chipset  detected on
NAME="Communication controller: Conexant HSF 56k HSFi Modem "
CLASS=0780
PCIDEV=14f1:2f00
SUBSYS=14f1:2003
IRQ=10
IDENT=hsfmodem
 For candidate modem in:  00:0d.0
   0780 Communication controller: Conexant HSF 56k HSFi Modem 
      Primary device ID:  14f1:2f00
 Support type needed or chipset:   hsfmodem 
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
 From  
http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php download hsfmodem-7.68.00.12full_k2.6.24_16_generic_ubuntu_i386.deb.zip 
 Under Linux unpack with:
 $ unzip hsfmodem*.zip
 Then install with:
 $ sudo dpkg -i hsfmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details. 
 Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Predictive diagnostics for card in bus 00:11.6:
   Modem chipset  detected on
NAME="Communication controller: VIA Technologies, Inc. AC'97 Modem Controller "
CLASS=0780
PCIDEV=1106:3068
SUBSYS=none
IRQ=20
SOFT=1106:3068.MC97
CodecArchived=AGR02_possibly
IDENT=slmodemd
SLMODEMD_DEVICE=modem:1
Driver=snd-via82xx-modem
 For candidate modem in:  00:11.6
   0780 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller 
      Primary device ID:  1106:3068
    Subsystem PCI_id  none 
    Softmodem codec or chipset from diagnostics: 
                               from    Archives: AGR02_possibly, a Smartlink type                              
Support type needed or chipset:   slmodemd
 An ALSA (Advanced Linux Sound Architecture) modem driver:  snd-via82xx-modem
 provides Low Level support enabling contact with the modem hardware.
 For all BUT Conexant chip soft modems (using hsfmodem software)
 complementary High Level support is through a Smartlink utility:  slmodemd
 Download from 
http://linmodems.technion.ac.il/packages/smartlink/  the package SLMODEMD.gcc4.2.tar.gz having a compiled slmodemd. Unpack under Linux with:
    $ tar zxf SLMODEMD.gcc4.2.tar.gz
 and read instructions therein. But briefly, the modem is setup with command:
    sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
 reporting dynamic creation of ports:
   /dev/ttySL0 --> /dev/pts/N   , with N some number
 Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
----------------end Softmodem section --------------
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
 Completed candidate modem analyses.
 The base of the UDEV device file system is: /dev/.udev
 Versions adequately match for the compiler installed: 4.2.3
             and the compiler used in kernel assembly: 4.2.3 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.2
   linuc_headers base folder /lib/modules/2.6.24-16-generic/build
 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are n. The also required headers of package libc6 are commonly installed by default. 
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at 
http://packages.ubuntu.com or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through 
http://packages.ubuntu.comOnce downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
   -rwsr-xr-- 1 root dip 269256 2007-10-04 23:27 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:    
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.htmlTo enable dialout without Root permission do:
   $ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
   sudo chmod a+x /usr/sbin/pppd
Checking settings of:   /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see 
http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.htmlRead Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:
     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:
     Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
خب حالا من چه کار کنم ؟لطفا کامل بگید چون بدون مودم نمی شه که نمی شه.