ubuntu@ubuntu:~$ sudo -i
root@ubuntu:~# eciadsl-config-text
===== Welcome to the EciAdsl Linux driver configuration =====
At any time, press Ctrl+C to quit this script without saving modifications.
Tip: you can run eciadsl-config-text with a .bin file as parameter to change
your .bin quickly.
Your choice:
1) Configure all settings
2) Remove dabusb module
3) Change synch .bin file
Enter your choice (1-3, default is 1): 1
===> EciAdsl driver setup <===
Type in your user name (given by your provider): 123456789
Type in your password (given by your provider):
Type in your password again (for verification):
Select your provider:
1) AR..Telviso
2) AU..Arachnet
3) AU..iiNet
4) AU..Pacific Internet
5) AU..TPG
6) BE..Belgacom Skynet
7) BE..EDPnet
8) BE..Easynet
9) BE..Openweb
10) BE..PlanetInternet
11) BE..Tiscali Belgium
12) BR..Global Village Telecom
13) CH..Bluewin
14) CH..Econophone
15) CH..Netstream
16) CH..SolNet
17) CH..Sunrise
18) DK..Cybercity
19) DK..Tiscali
20) EG..Noor
21) EG..Menanet
22) ES..Auna
23) ES..Telefonica (ya.com)
24) ES..Wanadoo Spain
25) FI..Elisa Communications
26) FR..9 Telecom
27) FR..Cegetel
28) FR..Club-Internet
29) FR..Easynet
30) FR..Free
31) FR..Nerim
32) FR..Tele2
33) FR..Tiscali
34) FR..Wanadoo (France Telecom)
35) FR..World Online/Tiscali
36) HU..MonorNet
37) IL..Bezeq Intl.
38) IL..Internet Zahav IL
39) IL..Kavei Zahav
40) IL..Netvision
41) IT..Alice Telecom
42) IT..Infostrada
43) IT..Telecom Italia
44) IT..Tiscali Italia
45) PE..Telefonica del Peru
46) PL..Neostrade/TPnet
47) PT..Clix
48) PT..Sapo
49) PT..ViaNetwork
50) RU..Avangard
51) RU..WebPlus
52) SE..Telenordia
53) SG..Pacific Internet
54) SG..Singnet
55) UK..British Telecom
56) UK..Giointernet
57) UK..Kingston/Karoo Rapidtime
58) UK..Pipex UK
59) Other
Enter your choice (1-59, default is 1): 59
If your provider was not listed (or if you want to overwrite
defaults), you can type in your own DNS servers:
DNS1 currently unset
Type in an IP for DNS1 (press ENTER to skip):
DNS2 currently unset
Type in an IP for DNS2 (press ENTER to skip):
Enter now your VPI/VCI (depending on your provider/country)
Example for France: 8 35 (VPI=8, VCI=35)
These values correspond to the number dialed under Windows.
VPI currently unset
Type in your VPI (given by your provider): 0
VCI currently unset
Type in your VCI (given by your provider): 35
Select your modem:
1) Aethra Starmodem
2) Allnet ALL768UB
3) Archtek UGW-8000
4) Askey ALE070
5) Askey ALE130
6) Askey ALE150
7) Asus AAM6000UG
8) Atlantis Land I-Storm
9) Aztech 100U
10) BT Voyager
11) BT Voyager 100
12) BT Voyager 105
13) Conceptronic ConADSLUG
14) Conitech Kiowa
15) Cypress Globespan G7000
16) D-Link DSL200
17) D-Link DSL200 rev B
18) D-Link DSL200 rev B1
19) D-Link DSL200 generation III
20) Digicom MichelAngelo
21) Dynalink ALE070
22) ECI B-Focus
23) ECI HiFocus
24) Eicon Diva
25) Ericsson hm120dp
26) Ericsson hm121dp/di
27) Fujitsu FDX310
28) GVC BB039
29) IPM Datacom Webpower
30) IPM Datacom Dataway USB
31) IPM Datacom SpeedWeb USB
32) Kraun ADSL USB (#1)
33) Kraun ADSL USB (#2)
34) Linkmax HSA 100
35) Lucent CellPipe USB-20A (#1)
36) Lucent CellPipe USB-20A (#2)
37) Lucent CellPipe USB-20A (#3)
38) Nortek 2020 (#1)
39) Nortek 2020 (#2)
40) Nortek 2021 (#1)
41) Nortek 2021 (#2)
42) Nortek 2021 (Tiscali)
43) Onixon DSL100U
44) Prolink Hurricane 7000
45) Siemens Santis (#1)
46) Siemens Santis (#2)
47) Siemens Santis (#3)
48) Siemens Santis 10
49) Siemens Santis 100
50) SMC 7003 V.2 USB ADSL
51) Solwise SAR100
52) Solwise EA100
53) Supergrass Surfer
54) Telewell TW-EA100
55) Topcom Webr@cer 850
56) Topcom XPlorer 850
57) Turbocomm EA100
58) Turbocomm EA103
59) US Robotics 8500
60) Virata (Tiscali)
61) Wisecom ws-ad80usg
62) WyTek FM028
63) Xavi X7005Q2
64) Xentrix USB
65) Zoom 5510 ADSL
66) Zyxel Prestige 630-41
67) Other
Enter your choice (1-67, default is 1): 19
If your modem was not listed (or if you want to overwrite defaults),
you can enter your own VID1/PID1/VID2/PID2 (use eciadsl-probe-device
to get them), Globespan chipset and USB alt interface values:
VID1 currently set to 0915
Type in a VID1 (4-digit hexadecimal, press ENTER to keep current value): 0915
PID1 currently set to 8104
Type in a PID1 (4-digit hexadecimal, press ENTER to keep current value): 8104
VID2 currently set to 0915
Type in a VID2 (4-digit hexadecimal, press ENTER to keep current value): 0915
PID2 currently set to 8104
Type in a PID2 (4-digit hexadecimal, press ENTER to keep current value): 8104
Select your modem chipset:
1) Previous setting (GS7470)
2) GS7070
3) GS7470
Enter your choice (1-3, default is 1): 3
USB ALT INTERFACE for SYNCH process currently set to 0
Type in the USB ALT INTERFACE for SYNCH (1-digit decimal (0-5) , press ENTER to keep current value): 0
USB ALT INTERFACE for PPPOECI process currently set to 0
Type in the USB ALT INTERFACE for PPPOECI (1-digit decimal (0-5) , press ENTER to keep current value): 0
Select your .bin file for synch:
1) /etc/eciadsl/synch01.bin
Enter your choice (1-1, default is 1): 1
Select your PPP mode (use the DEFAULT one if you don't know what this means):
1) VCM_RFC2364
2) LLC_RFC2364
3) LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS
4) VCM_RFC_1483_BRIDGED_ETH
5) LLC_RFC1483_ROUTED_IP
6) VCM_RFC1483_ROUTED_IP
Enter your choice (1-6, default is 1): 3
Is DHCP used by your provider (MOST users should say NO)?
(y/n) n
Did you get a static IP from your provider (MOST users should say NO)?
(y/n) n
==== Configuration will be created with these values :
+ User : 123456789
+ Password : (hidden)
+ Provider : Other
DNS 1 :
DNS 2 :
+ VPI/VCI : 0/35
+ Modem : D-Link DSL200 generation III
GS chipset : GS7470
VID1/PID1 : 0915/8104
VID2/PID2 : 0915/8104
ALT SYNCH : 0
ALT PPPOECI : 0
+ .bin file : /etc/eciadsl/synch01.bin
+ PPP mode : LLC_SNAP_RFC1483_BRIDGED_ETH_NO_FCS
+ use DHCP : no
+ use static IP : no
Press ENTER to create config files or Ctrl+C to exit now without saving.
backing up /etc/ppp/chap-secrets to /etc/ppp/chap-secrets.bak.. OK
modifying /etc/ppp/chap-secrets.. OK
backing up /etc/ppp/pap-secrets to /etc/ppp/pap-secrets.bak.. OK
modifying /etc/ppp/pap-secrets.. OK
creating /etc/ppp/peers/adsl.. OK
creating /etc/eciadsl/eciadsl.conf..OK
==== eciadsl-config-text: Configuration updated with success !
You can now run eciadsl-start (as root) to connect to the internet.
root@ubuntu:~# eciadsl-start
[EciAdsl 1/5] Setting up USB support...
Preliminary USB device filesystem is OK
Loading tun/tap module...
tun loaded successfully
[EciAdsl 2/5] Uploading firmware...
Process skipped .. no more needed
firmware loaded successfully
[EciAdsl 3/5] Synchronization...
OK eciadsl-synch: success
Synchronization successful
[EciAdsl 4/5] Connecting to provider...
Connection successful
[EciAdsl 5/5] Setting up route table...
Waiting for tap0...
ERROR: couldn't set your static IP or your external gateway
If you don't use PPPoE, please check your configuration.
root@ubuntu:~#
تا خط بالا مطابق راهنما هست و مشکلی هم نیست
اگر بعد از این حالت فرمان زیر نوشته شود
Sudo pppoeconf
صفحه ای باز میشود که عکس شماره یک هستش
بعد از کمی اسکن کردن پیغام ظاهر میشه که عکس شماره 2هستش
لطفا من را راهنمایی کنید
موضوع: خدا رو شکر مودم dlink dsl 200 برای adsl تعریف شد (دفعات بازدید: 22630 بار)
