انجمن‌های فارسی اوبونتو

لطفاً به انجمن‌ها وارد شده و یا جهت ورود ثبت‌نام نمائید

لطفاً جهت ورود نام کاربری و رمز عبورتان را وارد نمائید


ارائه ۲۵٫۰۴ اوبونتو منتشر شد 🎉

نویسنده موضوع: سوال در مورد اتصال به اینترنت در اوبونتو 8.10  (دفعات بازدید: 17110 بار)

0 کاربر و 1 مهمان درحال مشاهده موضوع.

آفلاین Majid 31

  • Newbie
  • *
  • ارسال: 18
بنام خدا

سلام
دوست عزیز با این سرعت که نمیشه کاری کرد خیلی خیلی کمه میشه بگید چرا دور زدنش توصیه نمیشه؟؟؟ اگه ممکنه یه راه حلی براش پیدا کنید بی زحمت با این وضع باید بیخیال اینترنت بشم...

منتظرم

یا حق.

آفلاین ahmed

  • High Hero Member
  • *
  • ارسال: 1069
  • جنسیت : پسر
    • یادداشت‌های یک دوست‌دار نرم‌افزارهای آزاد
نقل‌قول
چرا دور زدنش توصیه نمیشه؟؟؟

چون
متن باز= کرک کردن

تو گوگل جست و جو کنید پیدا می شه... اما باز هم توصیه ...

آفلاین rezakhodadadi

  • Newbie
  • *
  • ارسال: 10
سلام
من یه تازه کارم وهیچی سردرنمیارم یکی راهنمایی کنه
من فایل اسکن مودم دانلود کردم
ونصبش کردم ودوتا فایل این
1stReadوModemData
محتویاتش اینه
1stRead

If you want help from the email group Discuss@linmodems.org, PLEASE join the List
at http://www.linmodems.org . Otherwise your messages will be delayed until the evening,
waiting for someone to verify it is not junk mail, before forwarding through the List server.
   
The files in this Modem/ folder have the following roles:

ModemData.txt - Diagnostics and accumulated information cogent to your modem and host system.
     This is the ONLY file which should be sent to the List  DISCUSS@LINMODEMS.ORG ,
     if further help is needed. Send your email and attachments as plain text as
     other formats are rejected by the List Server, to avoid virus transmission.
     Always send the ENTIRE ModemData.txt,  as It includes subtle diagnostic ouputs needed
     to best guide you. Please in the covering email mention your Country, to enable Country
     specific advice.
     Always use the most recent update of scanModem accessed ONLY at
      http://linmodems.technion.ac.il/packages/scanModem.gz
     to produce ModemData.txt
     URLs to cogent advice are regularly updated, so your problem may be solved therein.
     Please Do NOT send  Do NOT send other files in this folder Modem/

Several informative files without diagnostics are in the DOCs subfolder.
A file(s) specific to your modem chipset will be written, such as:
  Smartlink.txt, Conexant.txt, Intel.txt , etc

YourModem.txt - Guidance about operating your particular System, for your benefit
     It should NOT be sent to Discuss@linmodems.org

Rational.txt - Motivations of this scanModem package. 

DriverCompiling.txt -  Explains the roles of additional files which may have to be installed
   to support compiling of modem drivers, and the steps to take.   

SoftModem.txt - Information and instructions about "soft modems".
     For these modems, additional steps may be necessary for choice of supporting software.
     The primary PCI ID is that of the host audio or modem controller, which can support diverse Subsystems. It is the chipset of the Subsystem which determines the software needed.

ModemTesting.txt SHOULD be read, but after drivers have been installed.

InfoGeneral.txt has general information about the status of winmodem support under Linux,
    Do read it if ModemData.txt  reports that your current modem is not supported under Linux.

Unsubscribe.txt - Howto terminate email tranmissions from the List.

If you are Linux newcomer, please do locate your local Linux group through:
    http://www.linux.org/groups/index.html  .  If you are not comfortable with English,
    a local Linux user can often be of substantial assistance in getting you on to the Internet.
 
و.....................
ModemData

 Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.27-9-generic
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686, 
Linux version 2.6.27-9-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 21:57:00 UTC 2008
 scanModem update of:  2009_02_04

 There are no blacklisted modem drivers in /etc/modprobe*  files
 Potentially useful modem drivers now loaded are:
         snd_hda_intel       

Attached USB devices are:
 ID 0483:7554 SGS Thomson Microelectronics 56k SoftModem
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html

For candidate card in slot 02:01.0, firmware information and bootup diagnostics are:
 PCI slot   PCI ID      SubsystemID   Name
 ----------   ---------   ---------   --------------
 02:01.0   1106:3288   1849:0888   Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC]

 Modem interrupt assignment and sharing:
 17:       3141   IO-APIC-fasteoi   HDA Intel
 --- Bootup diagnostics for card in PCI slot 02:01.0 ----
[    0.481770] PCI: 0000:02:01.0 reg 10 64bit mmio: [fbffc000, fbffffff]
[    0.481805] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[    0.481809] pci 0000:02:01.0: PME# disabled
[   15.513379] HDA Intel 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   15.513410] HDA Intel 0000:02:01.0: setting latency timer to 64
[   15.513416] HDA Intel 0000:02:01.0: PCI: Disallowing DAC for device

 The PCI slot 02:01.0 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
 if help is needed.
 


===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.17
The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-02: ALC888 Analog : ALC888 Analog : capture 1
00-01: ALC888 Digital : ALC888 Digital : playback 1
00-00: ALC888 Analog : ALC888 Analog : playback 1 : capture 1

about /proc/asound/cards:
------------------------
 0 [VT82xx         ]: HDA-Intel - HDA VIA VT82xx
                      HDA VIA VT82xx at 0xfbffc000 irq 17

 PCI slot 02:01.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.27-9-generic/kernel/sound/pci/hda/snd-hda-intel.ko
UNEXPECTED HDA diagnostic outcome.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 001:
   Modem chipset  detected on
SLOT="Bus 001 Device 003:"
NAME="SGS Thomson Microelectronics 56k SoftModem"
bus=001
USBmodemID=0483:7554
IDENT=slusb
Driver=slusb

For a detailed USB cellphone usage report, see http://linmodems.technion.ac.il/bigarch/archive-eighth/msg03240.html
 For candidate modem in:  001
    SGS Thomson Microelectronics 56k SoftModem
      Primary device ID:  0483:7554
 Support type needed or chipset:   slusb
 

----------------end Softmodem section --------------
The modem is supported by the Smartlink slusb
plus the slmodemd helper utility.  Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.


 From  http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/ ,
 download the package slamr-2.6.27-9-generic.tar.gz
 Under Linux, open a terminal and unpack with:
 $ tar zxvf slamr*.tar.gz
 Move into the unpacked folder
 $ cd slamr-2.6.27-9-generic
 Look around
 $ ls
 Run the
 $  sudo ./setup

 Afterwards do:
 $ slmodemd --help
 $ slmodemd --countrylist &> Clist.txt
 If not in the USA, look for your COUNTRY_NAME therein.
 Do and edit with:
 $ sudo gedit  /etc/default/sl-modem-daemon
 and therein replace the USA in the line:
 SLMODEMD_COUNTRY=USA
 This will provide for the correct Country setting in the automated:
    slmodemd -c COUNTRY /dev/slamr0

 Read the DOCs/Smartlink.txt and DOCs/YourSystem.txt
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================


Predictive  diagnostics for card in bus 02:01.0:
   Modem chipset not detected on
NAME="Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] "
CLASS=0403
PCIDEV=1106:3288
SUBSYS=1849:0888
IRQ=17
HDA=1106:3288
SOFT=1106:3288.HDA


 High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,
 and many are supported by the ALSA audio+modem driver snd-hda-intel
 A modem was not detected on HDA card 1106:3288.
 If another modem card is present, then most likely 1106:3288 does not host a modem.
 If another modem card has not been detected, then possibilities are:
   1) A Conexant modem chip is present on 1106:3288, as Conexant chips
 are frequently not detectable by ALSA diagnostics
   2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
   sudo wvdialconf  /etc/wvdial.conf

 For candidate modem in:  02:01.0
   0403 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC]
      Primary device ID:  1106:3288
    Subsystem PCI_id  1849:0888
    Softmodem codec or chipset from diagnostics:
                               from    Archives:
                       
     

Support type needed or chipset:   

Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.

2) An ALSA modem driver plus slmodemd.  Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.3.tar.gz from:
   http://linmodems.technion.ac.il/packages/smartlink/

----------------end Softmodem section --------------


 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.3.2
             and the compiler used in kernel assembly: 4.3.2


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.3
   linuc_headers base folder /lib/modules/2.6.27-9-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
   -rwsr-xr-- 1 root dip 277160 2008-11-21 00:28 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
   $ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
   sudo chmod a+x /usr/sbin/pppd

Checking settings of:   /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0: 
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

خواهشا یکی کمک کنه حالا باید چیکارکنم
ممنون میشم همین جا توضیح بدومن راازسردرگمی دربیاره
 :( :( :( :( :( :( :(

آفلاین lovee20002002

  • Full Member
  • *
  • ارسال: 118
  • جنسیت : پسر
    • شخصي
سلام
تو این خط کمی در باره مودم شما توضیخ داده که چطوری نصب کنید

 From  http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/ ,
 download the package slamr-2.6.27-9-generic.tar.gz
 Under Linux, open a terminal and unpack with:
 $ tar zxvf slamr*.tar.gz
 Move into the unpacked folder
 $ cd slamr-2.6.27-9-generic
 Look around
 $ ls
 Run the
 $  sudo ./setup

 Afterwards do:
 $ slmodemd --help
 $ slmodemd --countrylist &> Clist.txt
 If not in the USA, look for your COUNTRY_NAME therein.
 Do and edit with:
 $ sudo gedit  /etc/default/sl-modem-daemon
 and therein replace the USA in the line:
 SLMODEMD_COUNTRY=USA
 This will provide for the correct Country setting in the automated:
    slmodemd -c COUNTRY /dev/slamr0

 Read the DOCs/Smartlink.txt and DOCs/YourSystem.txt
Writing DOCs/Smartlink.txt

این دستور رو تو ترمینال بزنید
uname -rببینید اگر کرنل شما 2.6.27.7 بود این فایلو دانلود کنید
http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/slamr-2.6.27-7-generic.tar.gzاگر کرنل شما 2.6.27.9 بود که تو اطلاعاتی که دادید میگه 2.6.27.9 رو باید دانلود کنید
اینو دانلود کنید
http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/slamr-2.6.27-9-generic.tar.gzروش نصبش هم داخل فایل هست
در لینوکس هیچ چیزی غیر ممکن نیست

آفلاین rezakhodadadi

  • Newbie
  • *
  • ارسال: 10
کرنل من این 2.6.27.9 بود
فایل هم دانلود کردم
دستورات که تو فایل هست میزنم تو ترمینا ال کار نمیده میشه بهم بگیدتو ترمینال اید چی بنویسم
 \\:D/ \\:D/ \\:D/

آفلاین Saman.S

  • Sr. Member
  • *
  • ارسال: 322
  • جنسیت : پسر
کرنل من این 2.6.27.9 بود
فایل هم دانلود کردم
دستورات که تو فایل هست میزنم تو ترمینا ال کار نمیده میشه بهم بگیدتو ترمینال اید چی بنویسم
 \\:D/ \\:D/ \\:D/

دستوراتی رو که تو ترمینال می زنید + خروجی رو بذارید.

آفلاین rezakhodadadi

  • Newbie
  • *
  • ارسال: 10
$ tar zxvf slamr*.tar.gz
 Move into the unpacked folder
 $ cd slamr-2.6.27-9-generic
 Look around
 $ ls
 Run the
 $  sudo ./setup
این دستورات رازدم خروجی میگه notfound

آفلاین lovee20002002

  • Full Member
  • *
  • ارسال: 118
  • جنسیت : پسر
    • شخصي
$ tar zxvf slamr*.tar.gz
 Move into the unpacked folder
 $ cd slamr-2.6.27-9-generic
 Look around
 $ ls
 Run the
 $  sudo ./setup
این دستورات رازدم خروجی میگه notfound
توجه کنید به جای * باید ادامه فایلو بزنید یعنی این دستور میشه
$ tar zxvf slamr-2.6.27-9-generic.tar.gz
یک بار چک کنید ببینید همین هست
راستی دقت کنید تو کدوم درایو هستید میتونید تو محیط گرافیکیتون فایلو اکسترس کنید بعد در محیط ترمینال ادامه بدید دستور اول حذف میشه اگر این کارو بکنید در واقع دستور اول فایلو اکسترس می کنه
در لینوکس هیچ چیزی غیر ممکن نیست

آفلاین rezakhodadadi

  • Newbie
  • *
  • ارسال: 10
این کارم کردم * راحذف وجاش نام فایل نوشتم ولی دوباره منویسه notfound فایل هم توصفحه دسکتاپ ابونتو
 ](*,) ](*,) ](*,) ](*,)
راستی ازکجا بفهمم که مودم نصب شده یا نه

آفلاین rezakhodadadi

  • Newbie
  • *
  • ارسال: 10

من اینطوری نوشتم واین داد
reza@reza-desktop:~/Desktop/slamr-2.6.27-9-generic$ sudo ./setup

[sudo] password for reza:

installing driver for kernel version 2.6.27-9-generic

Installing Smartlink support.

mv: cannot stat `/usr/sbin/slmodemd': No such file or directory

error: mdm setup: cannot stat `/dev/slamr0': No such file or directory

error: cannot setup device `/dev/slamr0'

Installing the Debian sl-modem-daemon package for autoloading drivers and modem setup.



Copying over newer files

Making folder /lib/modules/2.6.27-9-generic/extra

Copying drivers to /lib/modules/2.6.27-9-generic/extra

Checking driver install

slamr.ko  ungrab-winmodem.ko

Copying newer slmodemd to /usr/sbin/

Checking slmodemd version. Should be 2.9.11

SmartLink Soft Modem: version 2.9.11 Nov 27 2008 14:36:23

Finished installs.

Informing the System



Starting function tests, loading drivers:

Running diagnostic:



[  306.679132] slamr: module license 'Smart Link Ltd.' taints kernel.

[  306.688351] slamr: SmartLink AMRMO modem.



ports should be created by:

slmodemd -c USA /dev/slamr0

error: mdm setup: cannot stat `/dev/slamr0': No such file or directory

error: cannot setup device `/dev/slamr0'

Checking for success

Port creation with slmodemd failed.

Read the slamrInst.txt record, other *.txt files and the sample wvdial.conf .

آفلاین rezakhodadadi

  • Newbie
  • *
  • ارسال: 10
خواهشا یکی کمک کنه خودم رو کشتم این مودم نصب نشد :'( :'(

آفلاین Saman.S

  • Sr. Member
  • *
  • ارسال: 322
  • جنسیت : پسر
خواهشا یکی کمک کنه خودم رو کشتم این مودم نصب نشد :'( :'(

شما خودت هم یه بار این دستور رو اجرا کن ببین چی می گه.
sudo /usr/sbin/slmodemd -c USA /dev/slamr0

آفلاین rezakhodadadi

  • Newbie
  • *
  • ارسال: 10
اینی که گفتین زدم جوابش این بود
reza@reza-desktop:~$ sudo /usr/sbin/slmodemd -c USA /dev/slamr0
error: mdm setup: cannot stat `/dev/slamr0': No such file or directory
error: cannot setup device `/dev/slamr0'

آفلاین rezakhodadadi

  • Newbie
  • *
  • ارسال: 10

آفلاین Saman.S

  • Sr. Member
  • *
  • ارسال: 322
  • جنسیت : پسر
نمی دونم چرا این روش جواب نمی ده.
از روش ویکی هم امتحان کن:
http://wiki.ubuntu-ir.org/DialupModemHowto/Smartlinkالبته من این روش رو امتحان نکردم و درست نمی دونم چجوریه فقط می دونم با این یکی روش فرق داره!