[حل شده ]نصب گرافیک AMD Radeon HD 5470M لپتاپ DELL 5010

[Afshin Bolvardi]

خوب سلام !‌
من چند تا لپ تاپ دل دارم یکیشون Corei3 NVidia هست و کوچکترین مشکلی با اوبونتو نداره و دارم استفاده می کنم
یکیشون corei5 ATI هست :| کارت گرافیک AMD داره من ۱ ساله دارم اکثر درایور هارو تست می کنم اما جواب نمی ده
خوب کارایی که کردم !‌
اول این که jockey-gtk رو نصب کردم اما وقتی تو ترمینال فراخوانی میکنم میگه باید نصب کنید !‌وقتی هم دستور نصب می زنم میگه نصبه :|
دوم این که این خروجی دستور glxgears

کد: [انتخاب]

300 frames in 5.0 seconds = 59.912 FPS
   
اینم خروجی دستور lspci | grep VGA

کد: [انتخاب]

01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Madison [Radeon HD 5000M Series]
نصب نبودن کارت گرافیک مصرب باتری رو تا ۳.۵ برابر افزایش داده !‌ و یک باتری هم خراب کرده به طوری که ماندگاریش شده ۵ ثانیه !‌
همین لپتاپ وفتی روش ویندوز میریزم ۳ ساعت شارژ نگه می داره !‌با اویونتو ۴۰ مین
در ضمن در detials هم گرافیک رو زده unknown ! بیش از ۲۰۰ بار درایور ریختم و سیستم بالا نیومده !‌کمک :|

[ساسان]

نسخه اوبونت چیه باب؟ از نصب کرنل جدید که نمی‌ترسی؟

[Afshin Bolvardi]

نسخه اوبونت چیه باب؟ از نصب کرنل جدید که نمی‌ترسی؟

سلام
خیر دوست عزیز بنده از امتحان هیچ کاری نمی ترسم :دی

کد: [انتخاب]

ubuntu 12.10 64bit

[ساسان]

سلام
خیر دوست عزیز بنده از امتحان هیچ کاری نمی ترسم :دی

عالیه باب.
توی این پست توضیح دادم که چطور جدیدترین کرنل رو نصب و DPM رو فعال کنی.
اگر تستش کردی و جواب گرفتی بگو تا بزارمش روی آزادراه و بقیه هم استفاده کنن.

[ساسان]

سلام . درود - خروجی دستوری که گفتین در سیستم بنده اینه

کد: [انتخاب]

darkcoder@DarkCoder-PC:/$ glxinfo | grep "renderer"
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x301)
کدوم فایل رو دانلود کنم ؟‌    HD 5470 گرافیکمه

چرا روی llvmpipe هستی؟ قبلا سعی کرده بودی درایور کد بسته AMD رو نصب کنی؟ خروجی دستور dmesg و لاگ xorg رو برام بزار.

[Afshin Bolvardi]

سلام . درود - خروجی دستوری که گفتین در سیستم بنده اینه

کد: [انتخاب]

darkcoder@DarkCoder-PC:/$ glxinfo | grep "renderer"
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x301)
کدوم فایل رو دانلود کنم ؟‌    HD 5470 گرافیکمه

چرا روی llvmpipe هستی؟ قبلا سعی کرده بودی درایور کد بسته AMD رو نصب کنی؟ خروجی دستور dmesg و لاگ xorg رو برام بزار.

نه ! اما کرنل رو همون روز که گفتین آپدیت ! از سایت kernel دانلود کردم 3.11.1 رو و آپدیت کردم مال اون نیست ؟ چند مین دیگه خروجی هارو می زارم

[Afshin Bolvardi]

سلام . درود - خروجی دستوری که گفتین در سیستم بنده اینه

کد: [انتخاب]

darkcoder@DarkCoder-PC:/$ glxinfo | grep "renderer"
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x301)
کدوم فایل رو دانلود کنم ؟‌    HD 5470 گرافیکمه

چرا روی llvmpipe هستی؟ قبلا سعی کرده بودی درایور کد بسته AMD رو نصب کنی؟ خروجی دستور dmesg و لاگ xorg رو برام بزار.

خروجی dmseg

کد: [انتخاب]

[    2.079741] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.079826] sd 0:0:0:0: [sda] Write Protect is off
[    2.079833] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.079888] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.140448]  sda: sda1 sda2 sda3 < sda5 >
[    2.142189] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.178551] usb 1-1.6: New USB device found, idVendor=0c45, idProduct=6480
[    2.178566] usb 1-1.6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.178596] usb 1-1.6: Product: Laptop_Integrated_Webcam_1.3M
[    2.178600] usb 1-1.6: Manufacturer: CKF9139G457020002HF0
[    2.242166] ata2.00: ATAPI: HL-DT-STDVD+/-RW GT32N, A102, max UDMA/100
[    2.253574] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
[    2.258190] ata2.00: configured for UDMA/100
[    2.263465] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GT32N    A102 PQ: 0 ANSI: 5
[    2.268815] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.268822] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.269312] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.269566] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.347769] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=4500
[    2.347780] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.347784] usb 2-1.6: Product: BCM2046B1
[    2.347789] usb 2-1.6: Manufacturer: Broadcom
[    2.348859] hub 2-1.6:1.0: USB hub found
[    2.349153] hub 2-1.6:1.0: 3 ports detected
[    2.621528] usb 2-1.6.1: new full-speed USB device number 4 using ehci-pci
[    2.717857] usb 2-1.6.1: New USB device found, idVendor=413c, idProduct=8161
[    2.717871] usb 2-1.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.789290] usb 2-1.6.2: new full-speed USB device number 5 using ehci-pci
[    2.886499] usb 2-1.6.2: New USB device found, idVendor=413c, idProduct=8162
[    2.886509] usb 2-1.6.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.021331] Switched to clocksource tsc
[   11.312797] finished
[   11.312804] CPU 0:
[   11.312807]               events:    2210544
[   11.312808]        dropped bytes:    0
[   11.312810]        alloced bytes:    172348468
[   11.312812]        written bytes:    169077454
[   11.312814]        biggest event:    153
[   11.312816]       smallest event:    4
[   11.316660]          read events:   11308
[   11.316661]          lost events:   2199236
[   11.316663]         total events:   2210544
[   11.316664]   recorded len bytes:   978508
[   11.316665]  recorded size bytes:   962398
[   11.316666]  With dropped events, record len and size may not match
[   11.316666]  alloced and written from above
[   11.316668] CPU 1:
[   11.316669]               events:    13635
[   11.316670]        dropped bytes:    0
[   11.316671]        alloced bytes:    962336
[   11.316672]        written bytes:    942407
[   11.316673]        biggest event:    211
[   11.316675]       smallest event:    9
[   11.321115]          read events:   13635
[   11.321117]          lost events:   0
[   11.321118]         total events:   13635
[   11.321119]   recorded len bytes:   962336
[   11.321121]  recorded size bytes:   942407
[   11.321122] CPU 2:
[   11.321123]               events:    2206496
[   11.321124]        dropped bytes:    0
[   11.321126]        alloced bytes:    171745540
[   11.321127]        written bytes:    168483794
[   11.321128]        biggest event:    279
[   11.321129]       smallest event:    4
[   11.325314]          read events:   12881
[   11.325316]          lost events:   2193615
[   11.325317]         total events:   2206496
[   11.325318]   recorded len bytes:   976576
[   11.325319]  recorded size bytes:   958750
[   11.325320]  With dropped events, record len and size may not match
[   11.325320]  alloced and written from above
[   11.325322] CPU 3:
[   11.325323]               events:    2210365
[   11.325324]        dropped bytes:    0
[   11.325325]        alloced bytes:    172382928
[   11.325326]        written bytes:    169112270
[   11.325328]        biggest event:    258
[   11.325329]       smallest event:    4
[   11.329453]          read events:   12639
[   11.329455]          lost events:   2197726
[   11.329456]         total events:   2210365
[   11.329457]   recorded len bytes:   976388
[   11.329458]  recorded size bytes:   955809
[   11.329460]  With dropped events, record len and size may not match
[   11.329460]  alloced and written from above
[   11.329461] Ring buffer PASSED!
[   11.332851] Key type trusted registered
[   11.335436] Key type encrypted registered
[   11.338516]   Magic number: 13:993:881
[   11.338718] rtc_cmos 00:02: setting system clock to 2013-09-21 10:52:35 UTC (1379760755)
[   11.340016] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   11.340018] EDD information not available.
[   11.348945] ------------[ cut here ]------------
[   11.348952] WARNING: CPU: 3 PID: 1 at kernel/workqueue.c:4627 workqueue_cpu_up_callback+0x4e9/0x530()
[   11.348953] Modules linked in:
[   11.348957] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 3.11.1 #1
[   11.348958] Hardware name: Dell Inc. Inspiron N5010/0YXXJJ, BIOS A15 07/19/2011
[   11.348960]  0000000000000009 ffff880131e0dc78 ffffffff818a490d 00000000000013e8
[   11.348963]  0000000000000000 ffff880131e0dcb8 ffffffff81099ccc ffff880137c14d20
[   11.348966]  ffff880137c148c0 ffff880137c14d20 ffff880137c14c98 0000000000000000
[   11.348969] Call Trace:
[   11.348976]  [<ffffffff818a490d>] dump_stack+0x46/0x58
[   11.348980]  [<ffffffff81099ccc>] warn_slowpath_common+0x8c/0xc0
[   11.348983]  [<ffffffff81099d1a>] warn_slowpath_null+0x1a/0x20
[   11.348985]  [<ffffffff810b91a9>] workqueue_cpu_up_callback+0x4e9/0x530
[   11.348988]  [<ffffffff818b1d9d>] notifier_call_chain+0x4d/0x70
[   11.348992]  [<ffffffff810c494e>] __raw_notifier_call_chain+0xe/0x10
[   11.348995]  [<ffffffff81099e20>] __cpu_notify+0x20/0x40
[   11.348997]  [<ffffffff818963bb>] _cpu_down+0x25b/0x280
[   11.349000]  [<ffffffff81896416>] cpu_down+0x36/0x50
[   11.349003]  [<ffffffff818957bf>] _debug_hotplug_cpu+0x6f/0xc0
[   11.349009]  [<ffffffff81f780d7>] ? topology_init+0x8c/0x8c
[   11.349011]  [<ffffffff81f780e4>] debug_hotplug_cpu+0xd/0x11
[   11.349015]  [<ffffffff81002152>] do_one_initcall+0x122/0x180
[   11.349019]  [<ffffffff810bc900>] ? parse_args+0x190/0x370
[   11.349022]  [<ffffffff81f6e05d>] kernel_init_freeable+0x13e/0x1cd
[   11.349024]  [<ffffffff81f6d89b>] ? do_early_param+0x8c/0x8c
[   11.349027]  [<ffffffff818950f0>] ? rest_init+0xd0/0xd0
[   11.349029]  [<ffffffff818950fe>] kernel_init+0xe/0xf0
[   11.349033]  [<ffffffff818b662c>] ret_from_fork+0x7c/0xb0
[   11.349036]  [<ffffffff818950f0>] ? rest_init+0xd0/0xd0
[   11.349037] ---[ end trace 4e24b53a74b8d53f ]---
[   11.349064] _cpu_down: attempt to take down CPU 0 failed
[   11.350617] Freeing unused kernel memory: 1416K (ffffffff81f56000 - ffffffff820b8000)
[   11.350620] Write protecting the kernel read-only data: 14336k
[   11.353592] Freeing unused kernel memory: 1292K (ffff8800018bd000 - ffff880001a00000)
[   11.354226] Freeing unused kernel memory: 284K (ffff880001db9000 - ffff880001e00000)
[   11.379485] udevd[152]: starting version 175
[   11.497919] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   11.498242] r8169 0000:13:00.0: irq 46 for MSI/MSI-X
[   11.504136] r8169 0000:13:00.0 eth0: RTL8102e at 0xffffc9000060a000, f0:4d:a2:b1:95:1d, XID 04e00000 IRQ 46
[   11.512998] usbcore: registered new interface driver usbhid
[   11.513002] usbhid: USB HID core driver
[   11.553960] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/input/input5
[   11.554168] hid-generic 0003:413C:8161.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1d.0-1.6.1/input0
[   11.554328] input: HID 413c:8162 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/input/input6
[   11.554506] hid-generic 0003:413C:8162.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1d.0-1.6.2/input0
[   11.954831] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[   11.954835] EXT4-fs (sda1): write access will be enabled during recovery
[   12.732119] EXT4-fs (sda1): orphan cleanup on readonly fs
[   12.732591] EXT4-fs (sda1): 19 orphan inodes deleted
[   12.732593] EXT4-fs (sda1): recovery complete
[   12.872905] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   14.104821] init: ureadahead main process (323) terminated with status 5
[   16.721159] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   18.115426] udevd[529]: starting version 175
[   19.169528] lp: driver loaded but no devices found
[   19.971301] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20130517/utaddress-251)
[   19.971310] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.971313] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20130517/utaddress-251)
[   19.971317] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.971320] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20130517/utaddress-251)
[   19.971324] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.971326] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   19.983913] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[   19.984271] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[   19.984420] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   19.989047] wmi: Mapper loaded
[   20.338351] acpi device:03: registered as cooling_device5
[   20.338420] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[   20.338527] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7
[   20.341610] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   20.601597] input: Dell WMI hotkeys as /devices/virtual/input/input8
[   20.777428] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[   20.777462] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[   20.777488] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[   20.777537] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[   20.790181] bcma: bus0: Bus registered
[   20.932900] ppdev: user-space parallel port driver
[   21.947313] usb 2-1.6.3: new full-speed USB device number 6 using ehci-pci
[   22.043492] usb 2-1.6.3: New USB device found, idVendor=413c, idProduct=8160
[   22.043498] usb 2-1.6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   22.043502] usb 2-1.6.3: Product: Dell Wireless 365 Bluetooth Module
[   22.043504] usb 2-1.6.3: Manufacturer: Dell Computer Corp
[   22.883670] init: failsafe main process (770) killed by TERM signal
[   23.190530] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 581785
[   23.263965] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[   23.404621] Linux video capture interface: v2.00
[   25.311583] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6480)
[   25.338690] Bluetooth: Core ver 2.16
[   25.338727] NET: Registered protocol family 31
[   25.338730] Bluetooth: HCI device and connection manager initialized
[   25.338839] Bluetooth: HCI socket layer initialized
[   25.338845] Bluetooth: L2CAP socket layer initialized
[   25.338859] Bluetooth: SCO socket layer initialized
[   25.360031] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10
[   25.360281] usbcore: registered new interface driver uvcvideo
[   25.360284] USB Video Class driver (1.1.1)
[   25.594202] [drm] Initialized drm 1.1.0 20060810
[   25.918356] usbcore: registered new interface driver btusb
[   25.937431] type=1400 audit(1379760770.102:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=814 comm="apparmor_parser"
[   25.937820] type=1400 audit(1379760770.102:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=814 comm="apparmor_parser"
[   26.241252] type=1400 audit(1379760770.406:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=925 comm="apparmor_parser"
[   26.241576] type=1400 audit(1379760770.406:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=925 comm="apparmor_parser"
[   26.241762] type=1400 audit(1379760770.406:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=925 comm="apparmor_parser"
[   26.404123] Bluetooth: RFCOMM TTY layer initialized
[   26.404147] Bluetooth: RFCOMM socket layer initialized
[   26.404150] Bluetooth: RFCOMM ver 1.11
[   26.486773] type=1400 audit(1379760770.650:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=923 comm="apparmor_parser"
[   26.487086] type=1400 audit(1379760770.650:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=923 comm="apparmor_parser"
[   26.491223] type=1400 audit(1379760770.654:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=924 comm="apparmor_parser"
[   26.491376] type=1400 audit(1379760770.654:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=922 comm="apparmor_parser"
[   26.491578] type=1400 audit(1379760770.654:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=924 comm="apparmor_parser"
[   26.508281] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.508286] Bluetooth: BNEP filters: protocol multicast
[   26.508301] Bluetooth: BNEP socket layer initialized
[   27.363562] cfg80211: Calling CRDA to update world regulatory domain
[   28.244872] cfg80211: World regulatory domain updated:
[   28.244877] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   28.244880] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.244881] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   28.244883] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   28.244884] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.244886] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.356077] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   28.647583] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   28.647825] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   28.648606] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   28.648680] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[   29.002304] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   37.132581] r8169 0000:13:00.0 eth0: link down
[   37.132617] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   38.874504] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[   38.875424] cfg80211: Updating information on frequency 2412 MHz with regulatory rule:
[   38.875427] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   38.875429] cfg80211: Updating information on frequency 2417 MHz with regulatory rule:
[   38.875431] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   38.875433] cfg80211: Updating information on frequency 2422 MHz with regulatory rule:
[   38.875435] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   38.875436] cfg80211: Updating information on frequency 2427 MHz with regulatory rule:
[   38.875438] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   38.875440] cfg80211: Updating information on frequency 2432 MHz with regulatory rule:
[   38.875442] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   38.875444] cfg80211: Updating information on frequency 2437 MHz with regulatory rule:
[   38.875446] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   38.875447] cfg80211: Updating information on frequency 2442 MHz with regulatory rule:
[   38.875449] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   38.875451] cfg80211: Updating information on frequency 2447 MHz with regulatory rule:
[   38.875453] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   38.875454] cfg80211: Updating information on frequency 2452 MHz with regulatory rule:
[   38.875456] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   38.875458] cfg80211: Updating information on frequency 2457 MHz with regulatory rule:
[   38.875460] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   38.875462] cfg80211: Updating information on frequency 2462 MHz with regulatory rule:
[   38.875464] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 1900 mBm)
[   38.875465] cfg80211: Updating information on frequency 2467 MHz with regulatory rule:
[   38.875467] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 1900 mBm)
[   38.875469] cfg80211: Updating information on frequency 2472 MHz with regulatory rule:
[   38.875471] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A mBi, 1900 mBm)
[   38.875473] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits it
[   38.875636] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   39.083063] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   39.084288] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 243
[   39.281257] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   39.281274] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement)
[   39.281508] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   39.600416] [drm] radeon kernel modesetting enabled.
[   39.601204] [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68C1 0x1028:0x0447).
[   39.601239] [drm] register mmio base: 0xFBE20000
[   39.601240] [drm] register mmio size: 131072
[   39.601317] ATOM BIOS: Dell
[   39.601411] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   39.601414] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[   39.601416] [drm] Detected VRAM RAM=1024M, BAR=256M
[   39.601417] [drm] RAM width 128bits DDR
[   39.601560] [TTM] Zone  kernel: Available graphics memory: 1950032 kiB
[   39.601562] [TTM] Initializing pool allocator
[   39.601570] [TTM] Initializing DMA pool allocator
[   39.601817] [drm] radeon: 1024M of VRAM memory ready
[   39.601819] [drm] radeon: 512M of GTT memory ready.
[   39.826026] radeon 0000:01:00.0: radeon_uvd: Can't load firmware "radeon/CYPRESS_uvd.bin"
[   39.826049] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   39.835599] [drm] Loading REDWOOD Microcode
[   40.061357] smc: error loading firmware "radeon/REDWOOD_smc.bin"
[   40.061369] r600_cp: Failed to load firmware "radeon/REDWOOD_smc.bin"
[   40.061389] [drm:evergreen_startup] *ERROR* Failed to load firmware!
[   40.061398] radeon 0000:01:00.0: disabling GPU acceleration
[   40.062586] radeon 0000:01:00.0: ffff8801307d1400 unpin not necessary
[   40.121956] [drm] radeon atom DIG backlight initialized
[   40.121964] [drm] Radeon Display Connectors
[   40.121966] [drm] Connector 0:
[   40.121968] [drm]   LVDS-1
[   40.121970] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[   40.121971] [drm]   Encoders:
[   40.121973] [drm]     LCD1: INTERNAL_UNIPHY
[   40.121974] [drm] Connector 1:
[   40.121975] [drm]   HDMI-A-1
[   40.121976] [drm]   HPD1
[   40.121978] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[   40.121979] [drm]   Encoders:
[   40.121980] [drm]     DFP1: INTERNAL_UNIPHY1
[   40.121981] [drm] Connector 2:
[   40.121982] [drm]   VGA-1
[   40.121984] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   40.121985] [drm]   Encoders:
[   40.121986] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   40.122026] [drm] Internal thermal controller with fan control
[   40.122132] [drm] radeon: power management initialized
[   40.648067] [drm] fb mappable at 0xC0040000
[   40.648072] [drm] vram apper at 0xC0000000
[   40.648073] [drm] size 4325376
[   40.648074] [drm] fb depth is 24
[   40.648075] [drm]    pitch is 5632
[   40.648293] fbcon: radeondrmfb (fb0) is primary device
[   41.109798] Console: switching to colour frame buffer device 170x48
[   41.113296] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   41.113304] radeon 0000:01:00.0: registered panic notifier
[   41.113451] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0
[   41.885684] wlan0: authenticate with b0:48:7a:c7:df:c0
[   41.885698] wlan0: Allocated STA b0:48:7a:c7:df:c0
[   41.887178] wlan0: Inserted STA b0:48:7a:c7:df:c0
[   41.887185] wlan0: send auth to b0:48:7a:c7:df:c0 (try 1/3)
[   41.888675] wlan0: authenticated
[   41.888679] wlan0: moving STA b0:48:7a:c7:df:c0 to state 2
[   41.889017] wlan0: associate with b0:48:7a:c7:df:c0 (try 1/3)
[   41.891483] wlan0: RX AssocResp from b0:48:7a:c7:df:c0 (capab=0x411 status=0 aid=1)
[   41.891691] wlan0: moving STA b0:48:7a:c7:df:c0 to state 3
[   41.891695] wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0
[   41.891816] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0
[   41.891936] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0
[   41.892056] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0
[   41.892181] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated
[   41.892283] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[   41.892332] wlan0: associated
[   41.892347] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   41.892932] cfg80211: Calling CRDA for country: US
[   41.898542] cfg80211: Updating information on frequency 2412 MHz with regulatory rule:
[   41.898556] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   41.898559] cfg80211: Updating information on frequency 2417 MHz with regulatory rule:
[   41.898561] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   41.898567] cfg80211: Updating information on frequency 2422 MHz with regulatory rule:
[   41.898571] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   41.898573] cfg80211: Updating information on frequency 2427 MHz with regulatory rule:
[   41.898574] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   41.898576] cfg80211: Updating information on frequency 2432 MHz with regulatory rule:
[   41.898578] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   41.898580] cfg80211: Updating information on frequency 2437 MHz with regulatory rule:
[   41.898582] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   41.898583] cfg80211: Updating information on frequency 2442 MHz with regulatory rule:
[   41.898585] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   41.898587] cfg80211: Updating information on frequency 2447 MHz with regulatory rule:
[   41.898589] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   41.898592] cfg80211: Updating information on frequency 2452 MHz with regulatory rule:
[   41.898594] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   41.898596] cfg80211: Updating information on frequency 2457 MHz with regulatory rule:
[   41.898599] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   41.898601] cfg80211: Updating information on frequency 2462 MHz with regulatory rule:
[   41.898603] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   41.898605] cfg80211: Disabling freq 2467 MHz
[   41.898606] cfg80211: Disabling freq 2472 MHz
[   41.898611] cfg80211: Disabling freq 2484 MHz
[   41.898619] cfg80211: Regulatory domain changed to country: US
[   41.898624] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   41.898630] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   41.898636] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   41.898640] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   41.898642] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   41.898645] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   41.898647] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   42.188729] wlan0: moving STA b0:48:7a:c7:df:c0 to state 4
[   42.497462] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[   66.206200] ISO 9660 Extensions: Microsoft Joliet Level 3
[   66.296256] ISO 9660 Extensions: RRIP_1991A
[  213.961543] brcmsmac bcma0:0: wl0: brcms_c_d11hdrs_mac80211:  txop exceeded phylen 504/263 dur 2466/1504
darkcoder@DarkCoder-PC:~$ clear

darkcoder@DarkCoder-PC:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11.1 (root@DarkCoder-PC) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #1 SMP Fri Sep 20 00:34:41 IRDT 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.1 root=UUID=aa6ed805-c0be-4dc3-b03d-bce3e892d5bc ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf5a9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf5aa000-0x00000000bf5f1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf5f2000-0x00000000bf5fbfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf5fc000-0x00000000bf5fefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf5ff000-0x00000000bf61ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf620000-0x00000000bf628fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf629000-0x00000000bf62bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf62c000-0x00000000bf630fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf631000-0x00000000bf650fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf651000-0x00000000bf693fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf694000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Dell Inc. Inspiron N5010/0YXXJJ, BIOS A15 07/19/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   3 base 138000000 mask FF8000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
[    0.000000] reg 1, base: 4GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 1GB, type UC
[    0.000000] reg 3, base: 4992MB, range: 128MB, type UC
[    0.000000] total RAM covered: 3968M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 256M num_reg: 4  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 4GB, range: 1GB, type WB
[    0.000000] reg 3, base: 4992MB, range: 128MB, type UC
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcdb0-0x000fcdbf] mapped at [ffff8800000fcdb0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x02914000, 0x02914fff] PGTABLE
[    0.000000] BRK [0x02915000, 0x02915fff] PGTABLE
[    0.000000] BRK [0x02916000, 0x02916fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x137e00000-0x137ffffff]
[    0.000000]  [mem 0x137e00000-0x137ffffff] page 2M
[    0.000000] BRK [0x02917000, 0x02917fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x134000000-0x137dfffff]
[    0.000000]  [mem 0x134000000-0x137dfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x133ffffff]
[    0.000000]  [mem 0x100000000-0x133ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbf5a9fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbf3fffff] page 2M
[    0.000000]  [mem 0xbf400000-0xbf5a9fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbf694000-0xbf7fffff]
[    0.000000]  [mem 0xbf694000-0xbf7fffff] page 4k
[    0.000000] BRK [0x02918000, 0x02918fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3586e000-0x36c2efff]
[    0.000000] ACPI: RSDP 00000000000f0410 00024 (v03 DELL  )
[    0.000000] ACPI: XSDT 00000000bf5f2080 00054 (v01 DELL    WN09    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000bf5fba68 000F4 (v04 DELL    WN09    01072009 AMI  00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20130517/tbfadt-395)
[    0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0xBF62CF40/0x00000000BF62CF80, using 32 (20130517/tbfadt-522)
[    0.000000] ACPI: DSDT 00000000bf5f2168 09900 (v02 DELL    WN09    00005010 INTL 20051117)
[    0.000000] ACPI: FACS 00000000bf62cf40 00040
[    0.000000] ACPI: APIC 00000000bf5fbb60 00072 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 00000000bf5fbbd8 0014E (v01 AMICPU     PROC 00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 00000000bf5fbd28 0003C (v01   DELL     WN09 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bf5fbd68 00038 (v01   DELL     WN09 01072009 AMI. 00000003)
[    0.000000] ACPI: OSFR 00000000bf5fbda0 0008C (v01 DELL    M08     07DB0713 ASL  00000061)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x137ffffff]
[    0.000000]   NODE_DATA [mem 0x137ff8000-0x137ffcfff]
[    0.000000]  [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133800000-ffff8801375fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x137ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0xbf5a9fff]
[    0.000000]   node   0: [mem 0xbf694000-0xbf7fffff]
[    0.000000]   node   0: [mem 0x100000000-0x137ffffff]
[    0.000000] On node 0 totalpages: 1013427
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12189 pages used for memmap
[    0.000000]   DMA32 zone: 780054 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 229376 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf5aa000-0xbf5f1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf5f2000-0xbf5fbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf5fc000-0xbf5fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf5ff000-0xbf61ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf620000-0xbf628fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf629000-0xbf62bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf62c000-0xbf630fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf631000-0xbf650fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf651000-0xbf693fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xbf800000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880137c00000 s90432 r8192 d24256 u524288
[    0.000000] pcpu-alloc: s90432 r8192 d24256 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 997569
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.1 root=UUID=aa6ed805-c0be-4dc3-b03d-bce3e892d5bc ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3876816K/4053708K available (8938K kernel code, 1363K rwdata, 3812K rodata, 1416K init, 8524K bss, 176892K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] Offload RCU callbacks from all CPUs
[    0.000000] Offload RCU callbacks from CPUs: 0-255.
[    0.000000] NO_HZ: Full dynticks CPUs: 1-255.
[    0.000000] NR_IRQS:16640 nr_irqs:712 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 5823 kB
[    0.000000]  per task-struct memory footprint: 1920 bytes
[    0.000000] allocated 16252928 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.008000] tsc: Detected 2533.337 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5066.67 BogoMIPS (lpj=10133348)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000054] Security Framework initialized
[    0.000069] AppArmor: AppArmor initialized
[    0.000070] Yama: becoming mindful.
[    0.000418] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001495] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001936] Mount-cache hash table entries: 256
[    0.002377] Initializing cgroup subsys memory
[    0.002399] Initializing cgroup subsys devices
[    0.002407] Initializing cgroup subsys freezer
[    0.002415] Initializing cgroup subsys blkio
[    0.002418] Initializing cgroup subsys perf_event
[    0.002422] Initializing cgroup subsys hugetlb
[    0.002463] CPU: Physical Processor ID: 0
[    0.002465] CPU: Processor Core ID: 0
[    0.002472] mce: CPU supports 9 MCE banks
[    0.002484] CPU0: Thermal monitoring enabled (TM1)
[    0.002502] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.002502] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.002502] tlb_flushall_shift: 6
[    0.002666] Freeing SMP alternatives memory: 28K (ffffffff820b8000 - ffffffff820bf000)
[    0.003919] ACPI: Core revision 20130517
[    0.010905] ACPI: All ACPI Tables successfully acquired
[    0.018659] ftrace: allocating 32625 entries in 128 pages
[    0.037256] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.076923] smpboot: CPU0: Intel(R) Core(TM) i5 CPU       M 460  @ 2.53GHz (fam: 06, model: 25, stepping: 05)
[    0.183881] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.183890] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.183899] ... version:                3
[    0.183901] ... bit width:              48
[    0.183902] ... generic registers:      4
[    0.183904] ... value mask:             0000ffffffffffff
[    0.183905] ... max period:             000000007fffffff
[    0.183906] ... fixed-purpose events:   3
[    0.183908] ... event mask:             000000070000000f
[    0.185288] NMI watchdog: Disabled lockup detectors by default for full dynticks
[    0.185290] NMI watchdog: You can reactivate it with 'sysctl -w kernel.watchdog=1'
[    0.185489] SMP alternatives: lockdep: fixing up alternatives
[    0.185497] smpboot: Booting Node   0, Processors  #1
[    0.198788] SMP alternatives: lockdep: fixing up alternatives
[    0.198793]  #2
[    0.212158] SMP alternatives: lockdep: fixing up alternatives
[    0.212164]  #3 OK
[    0.225354] Brought up 4 CPUs
[    0.225359] smpboot: Total of 4 processors activated (20266.69 BogoMIPS)
[    0.228240] devtmpfs: initialized
[    0.229716] EVM: security.selinux
[    0.229718] EVM: security.SMACK64
[    0.229719] EVM: security.capability
[    0.229806] PM: Registering ACPI NVS region [mem 0xbf5aa000-0xbf5f1fff] (294912 bytes)
[    0.229813] PM: Registering ACPI NVS region [mem 0xbf5fc000-0xbf5fefff] (12288 bytes)
[    0.229815] PM: Registering ACPI NVS region [mem 0xbf620000-0xbf628fff] (36864 bytes)
[    0.229816] PM: Registering ACPI NVS region [mem 0xbf62c000-0xbf630fff] (20480 bytes)
[    0.229818] PM: Registering ACPI NVS region [mem 0xbf651000-0xbf693fff] (274432 bytes)
[    0.231117] regulator-dummy: no parameters
[    0.231175] RTC time: 10:52:24, date: 09/21/13
[    0.231264] NET: Registered protocol family 16
[    0.231514] ACPI: bus type PCI registered
[    0.231609] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.231612] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.259870] PCI: Using configuration type 1 for base access
[    0.261953] bio: create slab <bio-0> at 0
[    0.262284] ACPI: Added _OSI(Module Device)
[    0.262287] ACPI: Added _OSI(Processor Device)
[    0.262289] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.262291] ACPI: Added _OSI(Processor Aggregator Device)
[    0.265808] ACPI: EC: Look up EC in DSDT
[    0.269453] ACPI: Executed 1 blocks of module-level executable AML code
[    0.276329] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.285683] ACPI: SSDT 00000000bf621c18 003A4 (v01    AMI      IST 00000001 MSFT 03000001)
[    0.286614] ACPI: Dynamic OEM Table Load:
[    0.286617] ACPI: SSDT           (null) 003A4 (v01    AMI      IST 00000001 MSFT 03000001)
[    0.287326] ACPI: Interpreter enabled
[    0.287332] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[    0.287337] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[    0.287363] ACPI: (supports S0 S3 S4 S5)
[    0.287365] ACPI: Using IOAPIC for interrupt routing
[    0.287406] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.287610] ACPI: No dock devices found.
[    0.312441] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.312706] PCI host bridge to bus 0000:00
[    0.312710] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.312713] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.312715] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.312717] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.312719] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[    0.312738] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.312765] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.312915] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[    0.312967] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.313058] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.313163] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.313201] pci 0000:00:16.0: reg 0x10: [mem 0xfbf08000-0xfbf0800f 64bit]
[    0.313318] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.313481] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.313513] pci 0000:00:1a.0: reg 0x10: [mem 0xfbf07000-0xfbf073ff]
[    0.313644] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.316854] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.316918] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.316944] pci 0000:00:1b.0: reg 0x10: [mem 0xfbf00000-0xfbf03fff 64bit]
[    0.317060] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.317198] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.317318] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.317412] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.317465] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.317583] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.317679] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.317731] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[    0.317849] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.317943] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.317998] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[    0.318115] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.318209] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.318274] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.318303] pci 0000:00:1d.0: reg 0x10: [mem 0xfbf06000-0xfbf063ff]
[    0.318433] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.321108] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.321166] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.321330] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.321383] pci 0000:00:1f.0: [8086:3b0b] type 00 class 0x060100
[    0.321629] pci 0000:00:1f.2: [8086:3b2e] type 00 class 0x01018a
[    0.321656] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.321669] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.321682] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.321695] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.321708] pci 0000:00:1f.2: reg 0x20: [io  0xf090-0xf09f]
[    0.321721] pci 0000:00:1f.2: reg 0x24: [io  0xf080-0xf08f]
[    0.321896] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.321921] pci 0000:00:1f.3: reg 0x10: [mem 0xfbf05000-0xfbf050ff 64bit]
[    0.321957] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.322109] pci 0000:00:1f.5: [8086:3b2d] type 00 class 0x010185
[    0.322135] pci 0000:00:1f.5: reg 0x10: [io  0xf070-0xf077]
[    0.322149] pci 0000:00:1f.5: reg 0x14: [io  0xf060-0xf063]
[    0.322161] pci 0000:00:1f.5: reg 0x18: [io  0xf050-0xf057]
[    0.322174] pci 0000:00:1f.5: reg 0x1c: [io  0xf040-0xf043]
[    0.322187] pci 0000:00:1f.5: reg 0x20: [io  0xf030-0xf03f]
[    0.322200] pci 0000:00:1f.5: reg 0x24: [io  0xf020-0xf02f]
[    0.322384] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    0.322418] pci 0000:00:1f.6: reg 0x10: [mem 0xfbf04000-0xfbf04fff 64bit]
[    0.322690] pci 0000:01:00.0: [1002:68c1] type 00 class 0x030000
[    0.322707] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.322719] pci 0000:01:00.0: reg 0x18: [mem 0xfbe20000-0xfbe3ffff 64bit]
[    0.322728] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.322743] pci 0000:01:00.0: reg 0x30: [mem 0xfbe00000-0xfbe1ffff pref]
[    0.322781] pci 0000:01:00.0: supports D1 D2
[    0.322843] pci 0000:01:00.1: [1002:aa60] type 00 class 0x040300
[    0.322859] pci 0000:01:00.1: reg 0x10: [mem 0xfbe40000-0xfbe43fff 64bit]
[    0.322928] pci 0000:01:00.1: supports D1 D2
[    0.323012] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.323016] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.323019] pci 0000:00:01.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.323023] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.323108] pci 0000:00:1c.0: PCI bridge to [bus 11]
[    0.323242] pci 0000:12:00.0: [14e4:4727] type 00 class 0x028000
[    0.323277] pci 0000:12:00.0: reg 0x10: [mem 0xfbd00000-0xfbd03fff 64bit]
[    0.323462] pci 0000:12:00.0: supports D1 D2
[    0.323464] pci 0000:12:00.0: PME# supported from D0 D3hot D3cold
[    0.327838] pci 0000:00:1c.1: PCI bridge to [bus 12]
[    0.327854] pci 0000:00:1c.1:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.328045] pci 0000:13:00.0: [10ec:8136] type 00 class 0x020000
[    0.328100] pci 0000:13:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.328191] pci 0000:13:00.0: reg 0x18: [mem 0xd0c10000-0xd0c10fff 64bit pref]
[    0.328265] pci 0000:13:00.0: reg 0x20: [mem 0xd0c00000-0xd0c0ffff 64bit pref]
[    0.328302] pci 0000:13:00.0: reg 0x30: [mem 0xfb300000-0xfb31ffff pref]
[    0.328550] pci 0000:13:00.0: supports D1 D2
[    0.328552] pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.328778] pci 0000:00:1c.2: PCI bridge to [bus 13]
[    0.328783] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.328788] pci 0000:00:1c.2:   bridge window [mem 0xfb300000-0xfbcfffff]
[    0.328796] pci 0000:00:1c.2:   bridge window [mem 0xd0c00000-0xd15fffff 64bit pref]
[    0.328882] pci 0000:00:1c.4: PCI bridge to [bus 15]
[    0.328887] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.328892] pci 0000:00:1c.4:   bridge window [mem 0xfa900000-0xfb2fffff]
[    0.328901] pci 0000:00:1c.4:   bridge window [mem 0xd0100000-0xd0afffff 64bit pref]
[    0.329020] pci 0000:00:1e.0: PCI bridge to [bus 20] (subtractive decode)
[    0.329036] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.329038] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.329040] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.329042] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[    0.329186] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    0.329476] acpi PNP0A08:00: ACPI _OSC control (0x19) granted
[    0.330487] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.330572] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.330654] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.330736] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.330817] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.330899] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.330981] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.331062] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.331601] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.331609] ACPI: \_SB_.PCI0: notify handler is installed
[    0.331728] Found 1 acpi root devices



[Afshin Bolvardi]

چرا روی llvmpipe هستی؟ قبلا سعی کرده بودی درایور کد بسته AMD رو نصب کنی؟ خروجی دستور dmesg و لاگ xorg رو برام بزار.

لاگ xorg رو با چه دستوری می تونم در بیارم ؟‌

[Ghost Shadow]

عزیز خروجی ها و کد ها تو تگ کد باشه لطفا.

1 کیلومتر اسکرول خورد

[Afshin Bolvardi]

عزیز خروجی ها و کد ها تو تگ کد باشه لطفا.

1 کیلومتر اسکرول خورد

بیش از حد طولانیه !‌توی کد قرار دادم اما چون کامل تا ته خونده نمیشه !‌code رو نمی بنده :دی
یه سایت بود توش note قرار می دادی بعد url می داد آدرسش رو دارین ؟‌

[Ghost Shadow]

امتحان کردم درسته.

ویرایش کن و تگ کد رو دستی ببند

[ساسان]

خروجی dmseg

کرنل سعی می‌کنه چند Firmware که مربوط به سری HD 5000 هست رو لود کنه ولی موفق نمیشه.

کد: [انتخاب]

[   39.601411] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   39.601414] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[   39.601416] [drm] Detected VRAM RAM=1024M, BAR=256M
[   39.601417] [drm] RAM width 128bits DDR
[   39.601560] [TTM] Zone  kernel: Available graphics memory: 1950032 kiB
[   39.601562] [TTM] Initializing pool allocator
[   39.601570] [TTM] Initializing DMA pool allocator
[   39.601817] [drm] radeon: 1024M of VRAM memory ready
[   39.601819] [drm] radeon: 512M of GTT memory ready.
[   39.826026] radeon 0000:01:00.0: radeon_uvd: Can't load firmware "radeon/CYPRESS_uvd.bin"
[   39.826049] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   39.835599] [drm] Loading REDWOOD Microcode
[   40.061357] smc: error loading firmware "radeon/REDWOOD_smc.bin"
[   40.061369] r600_cp: Failed to load firmware "radeon/REDWOOD_smc.bin"
[   40.061389] [drm:evergreen_startup] *ERROR* Failed to load firmware!
[   40.061398] radeon 0000:01:00.0: disabling GPU accelerationفایل‌های مورد نیاز رو این‌جا بگیر تو ‎/lib/firmware بزار تا لود کنه.

لاگ xorg رو با چه دستوری می تونم در بیارم ؟‌

فایل لاگ معمولا این‌جاست:

کد: [انتخاب]

/var/log/Xorg.0.logبعد از این‌که مشکل firmware ها رو حل کردی، فایل بالا رو با یه ادیتور مثل gedit یا vim باز کن، محتواش رو کپی کن و بزارش این‌جا.

یه سایت بود توش note قرار می دادی بعد url می داد آدرسش رو دارین ؟‌

این سایت‌ها زیادن. یه نمونه خوبش: http://paste.kde.org

[Afshin Bolvardi]

فایل‌های مورد نیاز رو این‌جا بگیر تو ‎/lib/firmware بزار تا لود کنه.

کدوم فایل وربوط به گرافیک منه ؟‌

[ساسان]

کدوم فایل وربوط به گرافیک منه ؟‌

طبق ویکی‌پیدا، HD 5470M باید Cedar باشه، من نمی‌دونم چرا سعی می‌کنه firmware های Redwood رو لود کنه.
تو حالا این‌ها رو کپی کن به اون دایرکتوری، فایل اضافه کپی کردن ضرری نداره:

کد: [انتخاب]

REDWOOD_smc.bin, CYPRESS_uvd.binکپی شون کن دقیقا این‌جا:

کد: [انتخاب]

/lib/firmware/radeon/

[Afshin Bolvardi]

کدوم فایل وربوط به گرافیک منه ؟‌

طبق ویکی‌پیدا، HD 5470M باید Cedar باشه، من نمی‌دونم چرا سعی می‌کنه firmware های Redwood رو لود کنه.
تو حالا این‌ها رو کپی کن به اون دایرکتوری، فایل اضافه کپی کردن ضرری نداره:

کد: [انتخاب]

REDWOOD_smc.bin, CYPRESS_uvd.binکپی شون کن دقیقا این‌جا:

کد: [انتخاب]

/lib/firmware/radeon/

سلام آقا ساسان
بعد کپی داخل firmware و بعد ریبوت مشکل گرافیکی حل شد !‌ کامل نصب نشده اما شده مثل قبل این که کرنل آپدیت کنم / اینم تو قسمت گرافیک

کد: [انتخاب]

Gallium 0.4 on AMD REDWOOD
اینم لاگ Xorg

کد: [انتخاب]

[    50.908]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[    50.908] X Protocol Version 11, Revision 0
[    50.908] Build Operating System: Linux 3.2.0-30-generic x86_64 Ubuntu
[    50.908] Current Operating System: Linux DarkCoder-PC 3.11.1 #1 SMP Fri Sep 20 00:34:41 IRDT 2013 x86_64
[    50.908] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.1 root=UUID=aa6ed805-c0be-4dc3-b03d-bce3e892d5bc ro quiet splash vt.handoff=7
[    50.908] Build Date: 08 October 2012  03:34:01PM
[    50.908] xorg-server 2:1.13.0-0ubuntu6 (For technical support please see http://www.ubuntu.com/support)
[    50.908] Current version of pixman: 0.26.0
[    50.908] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    50.908] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    50.908] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 21 23:38:29 2013
[    50.944] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    50.995] (==) No Layout section.  Using the first Screen section.
[    50.995] (==) No screen section available. Using defaults.
[    50.995] (**) |-->Screen "Default Screen Section" (0)
[    50.995] (**) |   |-->Monitor "<default monitor>"
[    50.995] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    50.995] (==) Automatically adding devices
[    50.995] (==) Automatically enabling devices
[    50.995] (==) Automatically adding GPU devices
[    51.029] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    51.029] Entry deleted from font path.
[    51.029] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    51.029] Entry deleted from font path.
[    51.029] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    51.029] Entry deleted from font path.
[    51.030] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    51.030] Entry deleted from font path.
[    51.030] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    51.030] Entry deleted from font path.
[    51.030] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    51.030] Entry deleted from font path.
[    51.030] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[    51.030] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    51.030] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    51.030] (II) Loader magic: 0x7fc06967bc40
[    51.030] (II) Module ABI versions:
[    51.030] X.Org ANSI C Emulation: 0.4
[    51.030] X.Org Video Driver: 13.0
[    51.030] X.Org XInput driver : 18.0
[    51.030] X.Org Server Extension : 7.0
[    51.030] (II) config/udev: Adding drm device (/dev/dri/card0)
[    51.033] (--) PCI:*(0:1:0:0) 1002:68c1:1028:0447 rev 0, Mem @ 0xc0000000/268435456, 0xfbe20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[    51.033] (II) Open ACPI successful (/var/run/acpid.socket)
[    51.046] Initializing built-in extension Generic Event Extension
[    51.046] Initializing built-in extension SHAPE
[    51.046] Initializing built-in extension MIT-SHM
[    51.046] Initializing built-in extension XInputExtension
[    51.046] Initializing built-in extension XTEST
[    51.046] Initializing built-in extension BIG-REQUESTS
[    51.046] Initializing built-in extension SYNC
[    51.046] Initializing built-in extension XKEYBOARD
[    51.046] Initializing built-in extension XC-MISC
[    51.046] Initializing built-in extension SECURITY
[    51.046] Initializing built-in extension XINERAMA
[    51.046] Initializing built-in extension XFIXES
[    51.046] Initializing built-in extension RENDER
[    51.046] Initializing built-in extension RANDR
[    51.046] Initializing built-in extension COMPOSITE
[    51.046] Initializing built-in extension DAMAGE
[    51.046] Initializing built-in extension MIT-SCREEN-SAVER
[    51.046] Initializing built-in extension DOUBLE-BUFFER
[    51.046] Initializing built-in extension RECORD
[    51.046] Initializing built-in extension DPMS
[    51.046] Initializing built-in extension X-Resource
[    51.046] Initializing built-in extension XVideo
[    51.046] Initializing built-in extension XVideo-MotionCompensation
[    51.046] Initializing built-in extension XFree86-VidModeExtension
[    51.046] Initializing built-in extension XFree86-DGA
[    51.046] Initializing built-in extension XFree86-DRI
[    51.046] Initializing built-in extension DRI2
[    51.046] (II) LoadModule: "glx"
[    51.082] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    51.097] (II) Module glx: vendor="X.Org Foundation"
[    51.097] compiled for 1.13.0, module version = 1.0.0
[    51.097] ABI class: X.Org Server Extension, version 7.0
[    51.097] (==) AIGLX enabled
[    51.098] Loading extension GLX
[    51.098] (==) Matched fglrx as autoconfigured driver 0
[    51.098] (==) Matched ati as autoconfigured driver 1
[    51.098] (==) Matched fglrx as autoconfigured driver 2
[    51.098] (==) Matched ati as autoconfigured driver 3
[    51.098] (==) Matched vesa as autoconfigured driver 4
[    51.098] (==) Matched modesetting as autoconfigured driver 5
[    51.098] (==) Matched fbdev as autoconfigured driver 6
[    51.098] (==) Assigned the driver to the xf86ConfigLayout
[    51.098] (II) LoadModule: "fglrx"
[    51.099] (WW) Warning, couldn't open module fglrx
[    51.099] (II) UnloadModule: "fglrx"
[    51.099] (II) Unloading fglrx
[    51.099] (EE) Failed to load module "fglrx" (module does not exist, 0)
[    51.099] (II) LoadModule: "ati"
[    51.099] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    51.106] (II) Module ati: vendor="X.Org Foundation"
[    51.107] compiled for 1.13.0, module version = 6.99.99
[    51.107] Module class: X.Org Video Driver
[    51.107] ABI class: X.Org Video Driver, version 13.0
[    51.107] (II) LoadModule: "radeon"
[    51.107] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    51.136] (II) Module radeon: vendor="X.Org Foundation"
[    51.136] compiled for 1.13.0, module version = 6.99.99
[    51.136] Module class: X.Org Video Driver
[    51.136] ABI class: X.Org Video Driver, version 13.0
[    51.136] (II) LoadModule: "vesa"
[    51.136] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    51.143] (II) Module vesa: vendor="X.Org Foundation"
[    51.143] compiled for 1.12.99.902, module version = 2.3.2
[    51.143] Module class: X.Org Video Driver
[    51.143] ABI class: X.Org Video Driver, version 13.0
[    51.143] (II) LoadModule: "modesetting"
[    51.143] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    51.150] (II) Module modesetting: vendor="X.Org Foundation"
[    51.150] compiled for 1.13.0, module version = 0.5.0
[    51.150] Module class: X.Org Video Driver
[    51.150] ABI class: X.Org Video Driver, version 13.0
[    51.150] (II) LoadModule: "fbdev"
[    51.151] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    51.151] (II) Module fbdev: vendor="X.Org Foundation"
[    51.151] compiled for 1.12.99.902, module version = 0.4.3
[    51.151] Module class: X.Org Video Driver
[    51.151] ABI class: X.Org Video Driver, version 13.0
[    51.151] (==) Matched fglrx as autoconfigured driver 0
[    51.151] (==) Matched ati as autoconfigured driver 1
[    51.151] (==) Matched fglrx as autoconfigured driver 2
[    51.151] (==) Matched ati as autoconfigured driver 3
[    51.151] (==) Matched vesa as autoconfigured driver 4
[    51.151] (==) Matched modesetting as autoconfigured driver 5
[    51.151] (==) Matched fbdev as autoconfigured driver 6
[    51.151] (==) Assigned the driver to the xf86ConfigLayout
[    51.151] (II) LoadModule: "fglrx"
[    51.152] (WW) Warning, couldn't open module fglrx
[    51.152] (II) UnloadModule: "fglrx"
[    51.152] (II) Unloading fglrx
[    51.152] (EE) Failed to load module "fglrx" (module does not exist, 0)
[    51.152] (II) LoadModule: "ati"
[    51.152] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    51.153] (II) Module ati: vendor="X.Org Foundation"
[    51.153] compiled for 1.13.0, module version = 6.99.99
[    51.153] Module class: X.Org Video Driver
[    51.153] ABI class: X.Org Video Driver, version 13.0
[    51.153] (II) LoadModule: "vesa"
[    51.153] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    51.153] (II) Module vesa: vendor="X.Org Foundation"
[    51.153] compiled for 1.12.99.902, module version = 2.3.2
[    51.153] Module class: X.Org Video Driver
[    51.153] ABI class: X.Org Video Driver, version 13.0
[    51.153] (II) UnloadModule: "vesa"
[    51.153] (II) Unloading vesa
[    51.153] (II) Failed to load module "vesa" (already loaded, 0)
[    51.153] (II) LoadModule: "modesetting"
[    51.153] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    51.153] (II) Module modesetting: vendor="X.Org Foundation"
[    51.153] compiled for 1.13.0, module version = 0.5.0
[    51.153] Module class: X.Org Video Driver
[    51.153] ABI class: X.Org Video Driver, version 13.0
[    51.153] (II) UnloadModule: "modesetting"
[    51.153] (II) Unloading modesetting
[    51.153] (II) Failed to load module "modesetting" (already loaded, 0)
[    51.153] (II) LoadModule: "fbdev"
[    51.154] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    51.154] (II) Module fbdev: vendor="X.Org Foundation"
[    51.154] compiled for 1.12.99.902, module version = 0.4.3
[    51.154] Module class: X.Org Video Driver
[    51.154] ABI class: X.Org Video Driver, version 13.0
[    51.154] (II) UnloadModule: "fbdev"
[    51.154] (II) Unloading fbdev
[    51.154] (II) Failed to load module "fbdev" (already loaded, 0)
[    51.154] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE
[    51.162] (II) VESA: driver for VESA chipsets: vesa
[    51.162] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    51.162] (II) FBDEV: driver for framebuffer: fbdev
[    51.162] (++) using VT number 7

[    51.201] (II) [KMS] Kernel modesetting enabled.
[    51.201] (WW) Falling back to old probe method for vesa
[    51.201] (WW) Falling back to old probe method for modesetting
[    51.201] (WW) Falling back to old probe method for fbdev
[    51.201] (II) Loading sub module "fbdevhw"
[    51.202] (II) LoadModule: "fbdevhw"
[    51.202] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    51.210] (II) Module fbdevhw: vendor="X.Org Foundation"
[    51.210] compiled for 1.13.0, module version = 0.0.2
[    51.210] ABI class: X.Org Video Driver, version 13.0
[    51.211] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    51.211] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    51.211] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    51.211] (==) RADEON(0): Default visual is TrueColor
[    51.211] (==) RADEON(0): RGB weight 888
[    51.211] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    51.211] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 5000 Series" (ChipID = 0x68c1)
[    51.211] (II) Loading sub module "dri2"
[    51.211] (II) LoadModule: "dri2"
[    51.211] (II) Module "dri2" already built-in
[    51.211] (II) Loading sub module "exa"
[    51.211] (II) LoadModule: "exa"
[    51.211] (II) Loading /usr/lib/xorg/modules/libexa.so
[    51.220] (II) Module exa: vendor="X.Org Foundation"
[    51.220] compiled for 1.13.0, module version = 2.6.0
[    51.220] ABI class: X.Org Video Driver, version 13.0
[    51.220] (II) RADEON(0): KMS Color Tiling: enabled
[    51.220] (II) RADEON(0): KMS Pageflipping: enabled
[    51.220] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[    51.348] (II) RADEON(0): Output LVDS has no monitor section
[    51.350] (II) RADEON(0): Output HDMI-0 has no monitor section
[    51.372] (II) RADEON(0): Output VGA-0 has no monitor section
[    51.500] (II) RADEON(0): EDID for output LVDS
[    51.500] (II) RADEON(0): Printing probed modes for output LVDS
[    51.500] (II) RADEON(0): Modeline "1366x768"x60.0   72.30  1366 1414 1446 1526  768 771 776 790 -vsync (47.4 kHz eP)
[    51.500] (II) RADEON(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz)
[    51.500] (II) RADEON(0): Modeline "1152x768"x59.8   71.75  1152 1216 1328 1504  768 771 781 798 -hsync +vsync (47.7 kHz)
[    51.500] (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    51.500] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    51.500] (II) RADEON(0): Modeline "848x480"x59.7   31.50  848 872 952 1056  480 483 493 500 -hsync +vsync (29.8 kHz)
[    51.500] (II) RADEON(0): Modeline "720x480"x59.7   26.75  720 744 808 896  480 483 493 500 -hsync +vsync (29.9 kHz)
[    51.500] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[    51.502] (II) RADEON(0): EDID for output HDMI-0
[    51.524] (II) RADEON(0): EDID for output VGA-0
[    51.524] (II) RADEON(0): Output LVDS connected
[    51.524] (II) RADEON(0): Output HDMI-0 disconnected
[    51.524] (II) RADEON(0): Output VGA-0 disconnected
[    51.524] (II) RADEON(0): Using exact sizes for initial modes
[    51.524] (II) RADEON(0): Output LVDS using initial mode 1366x768
[    51.524] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    51.524] (II) RADEON(0): mem size init: gart size :1fdee000 vram size: s:40000000 visible:3fba0000
[    51.524] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[    51.524] (==) RADEON(0): DPI set to (96, 96)
[    51.524] (II) Loading sub module "fb"
[    51.524] (II) LoadModule: "fb"
[    51.524] (II) Loading /usr/lib/xorg/modules/libfb.so
[    51.526] (II) Module fb: vendor="X.Org Foundation"
[    51.526] compiled for 1.13.0, module version = 1.0.0
[    51.526] ABI class: X.Org ANSI C Emulation, version 0.4
[    51.526] (II) Loading sub module "ramdac"
[    51.526] (II) LoadModule: "ramdac"
[    51.526] (II) Module "ramdac" already built-in
[    51.526] (II) UnloadModule: "vesa"
[    51.526] (II) Unloading vesa
[    51.526] (II) UnloadModule: "modesetting"
[    51.526] (II) Unloading modesetting
[    51.526] (II) UnloadModule: "fbdev"
[    51.526] (II) Unloading fbdev
[    51.526] (II) UnloadSubModule: "fbdevhw"
[    51.526] (II) Unloading fbdevhw
[    51.526] (--) Depth 24 pixmap format is 32 bpp
[    51.526] (II) RADEON(0): [DRI2] Setup complete
[    51.527] (II) RADEON(0): [DRI2]   DRI driver: r600
[    51.527] (II) RADEON(0): [DRI2]   VDPAU driver: r600
[    51.527] (II) RADEON(0): Front buffer size: 4128K
[    51.527] (II) RADEON(0): VRAM usage limit set to 935971K
[    51.528] (==) RADEON(0): Backing store disabled
[    51.528] (II) RADEON(0): Direct rendering enabled
[    51.528] (II) RADEON(0): Setting EXA maxPitchBytes
[    51.528] (II) EXA(0): Driver allocated offscreen pixmaps
[    51.528] (II) EXA(0): Driver registered support for the following operations:
[    51.528] (II)         Solid
[    51.528] (II)         Copy
[    51.528] (II)         Composite (RENDER acceleration)
[    51.528] (II)         UploadToScreen
[    51.528] (II)         DownloadFromScreen
[    51.528] (II) RADEON(0): Acceleration enabled
[    51.528] (==) RADEON(0): DPMS enabled
[    51.528] (==) RADEON(0): Silken mouse enabled
[    51.528] (II) RADEON(0): Set up textured video
[    51.528] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[    51.528] (II) RADEON(0): [XvMC] Extension initialized.
[    51.528] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    51.529] (--) RandR disabled
[    52.123] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    52.123] (II) AIGLX: enabled GLX_INTEL_swap_event
[    52.123] (II) AIGLX: enabled GLX_ARB_create_context
[    52.123] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    52.123] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    52.123] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    52.123] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    52.123] (II) AIGLX: Loaded and initialized r600
[    52.123] (II) GLX: Initialized DRI2 GL provider for screen 0
[    52.124] (II) RADEON(0): Setting screen physical size to 361 x 203
[    52.270] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    52.285] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    52.285] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    52.285] (II) LoadModule: "evdev"
[    52.285] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    52.318] (II) Module evdev: vendor="X.Org Foundation"
[    52.318] compiled for 1.13.0, module version = 2.7.3
[    52.318] Module class: X.Org XInput Driver
[    52.318] ABI class: X.Org XInput driver, version 18.0
[    52.318] (II) Using input driver 'evdev' for 'Power Button'
[    52.318] (**) Power Button: always reports core events
[    52.318] (**) evdev: Power Button: Device: "/dev/input/event3"
[    52.318] (--) evdev: Power Button: Vendor 0 Product 0x1
[    52.318] (--) evdev: Power Button: Found keys
[    52.318] (II) evdev: Power Button: Configuring as keyboard
[    52.319] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    52.319] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    52.319] (**) Option "xkb_rules" "evdev"
[    52.319] (**) Option "xkb_model" "pc105"
[    52.319] (**) Option "xkb_layout" "us"
[    52.319] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    52.319] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    52.319] (II) Using input driver 'evdev' for 'Video Bus'
[    52.319] (**) Video Bus: always reports core events
[    52.319] (**) evdev: Video Bus: Device: "/dev/input/event7"
[    52.319] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    52.319] (--) evdev: Video Bus: Found keys
[    52.320] (II) evdev: Video Bus: Configuring as keyboard
[    52.320] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
[    52.320] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    52.320] (**) Option "xkb_rules" "evdev"
[    52.320] (**) Option "xkb_model" "pc105"
[    52.320] (**) Option "xkb_layout" "us"
[    52.320] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    52.320] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    52.320] (II) Using input driver 'evdev' for 'Power Button'
[    52.320] (**) Power Button: always reports core events
[    52.320] (**) evdev: Power Button: Device: "/dev/input/event0"
[    52.320] (--) evdev: Power Button: Vendor 0 Product 0x1
[    52.320] (--) evdev: Power Button: Found keys
[    52.320] (II) evdev: Power Button: Configuring as keyboard
[    52.320] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    52.320] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    52.320] (**) Option "xkb_rules" "evdev"
[    52.320] (**) Option "xkb_model" "pc105"
[    52.320] (**) Option "xkb_layout" "us"
[    52.321] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    52.321] (II) No input driver specified, ignoring this device.
[    52.321] (II) This device may have been added with another device file.
[    52.321] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    52.321] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    52.321] (II) Using input driver 'evdev' for 'Sleep Button'
[    52.321] (**) Sleep Button: always reports core events
[    52.321] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    52.322] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    52.322] (--) evdev: Sleep Button: Found keys
[    52.322] (II) evdev: Sleep Button: Configuring as keyboard
[    52.322] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[    52.322] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    52.322] (**) Option "xkb_rules" "evdev"
[    52.322] (**) Option "xkb_model" "pc105"
[    52.322] (**) Option "xkb_layout" "us"
[    52.322] (II) config/udev: Adding drm device (/dev/dri/card0)
[    52.323] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event12)
[    52.323] (II) No input driver specified, ignoring this device.
[    52.323] (II) This device may have been added with another device file.
[    52.323] (II) config/udev: Adding input device Laptop_Integrated_Webcam_1.3M (/dev/input/event9)
[    52.323] (**) Laptop_Integrated_Webcam_1.3M: Applying InputClass "evdev keyboard catchall"
[    52.323] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_1.3M'
[    52.323] (**) Laptop_Integrated_Webcam_1.3M: always reports core events
[    52.323] (**) evdev: Laptop_Integrated_Webcam_1.3M: Device: "/dev/input/event9"
[    52.323] (--) evdev: Laptop_Integrated_Webcam_1.3M: Vendor 0xc45 Product 0x6480
[    52.323] (--) evdev: Laptop_Integrated_Webcam_1.3M: Found keys
[    52.323] (II) evdev: Laptop_Integrated_Webcam_1.3M: Configuring as keyboard
[    52.323] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10/event9"
[    52.323] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_1.3M" (type: KEYBOARD, id 10)
[    52.323] (**) Option "xkb_rules" "evdev"
[    52.323] (**) Option "xkb_model" "pc105"
[    52.323] (**) Option "xkb_layout" "us"
[    52.324] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event10)
[    52.324] (II) No input driver specified, ignoring this device.
[    52.324] (II) This device may have been added with another device file.
[    52.324] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event11)
[    52.324] (II) No input driver specified, ignoring this device.
[    52.324] (II) This device may have been added with another device file.
[    52.325] (II) config/udev: Adding input device HID 413c:8161 (/dev/input/event5)
[    52.325] (**) HID 413c:8161: Applying InputClass "evdev keyboard catchall"
[    52.325] (II) Using input driver 'evdev' for 'HID 413c:8161'
[    52.325] (**) HID 413c:8161: always reports core events
[    52.325] (**) evdev: HID 413c:8161: Device: "/dev/input/event5"
[    52.325] (--) evdev: HID 413c:8161: Vendor 0x413c Product 0x8161
[    52.325] (--) evdev: HID 413c:8161: Found keys
[    52.325] (II) evdev: HID 413c:8161: Configuring as keyboard
[    52.325] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/input/input5/event5"
[    52.325] (II) XINPUT: Adding extended input device "HID 413c:8161" (type: KEYBOARD, id 11)
[    52.325] (**) Option "xkb_rules" "evdev"
[    52.325] (**) Option "xkb_model" "pc105"
[    52.325] (**) Option "xkb_layout" "us"
[    52.326] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    52.326] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    52.326] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    52.326] (**) AT Translated Set 2 keyboard: always reports core events
[    52.326] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    52.326] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    52.326] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    52.326] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    52.326] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    52.326] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    52.326] (**) Option "xkb_rules" "evdev"
[    52.326] (**) Option "xkb_model" "pc105"
[    52.326] (**) Option "xkb_layout" "us"
[    52.326] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[    52.326] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    52.326] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    52.326] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    52.326] (II) LoadModule: "synaptics"
[    52.327] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    52.327] (II) Module synaptics: vendor="X.Org Foundation"
[    52.327] compiled for 1.12.99.905, module version = 1.6.2
[    52.327] Module class: X.Org XInput Driver
[    52.327] ABI class: X.Org XInput driver, version 18.0
[    52.327] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    52.328] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    52.328] (**) Option "Device" "/dev/input/event6"
[    52.348] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    52.348] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5650
[    52.348] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4710
[    52.348] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    52.348] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    52.348] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    52.348] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    52.348] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    52.348] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    52.360] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event6"
[    52.360] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    52.360] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    52.360] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    52.360] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[    52.360] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    52.360] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    52.360] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    52.360] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    52.360] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    52.360] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    52.360] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    52.364] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event8)
[    52.364] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    52.364] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    52.364] (**) Dell WMI hotkeys: always reports core events
[    52.364] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event8"
[    52.365] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    52.365] (--) evdev: Dell WMI hotkeys: Found keys
[    52.365] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    52.365] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[    52.365] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[    52.365] (**) Option "xkb_rules" "evdev"
[    52.365] (**) Option "xkb_model" "pc105"
[    52.365] (**) Option "xkb_layout" "us"
[    75.542] (II) XKB: reuse xkmfile /var/lib/xkb/server-AFCE3E705BA935546C804A121DA0D991A9089F72.xkm