به نام خدا
سلام
من یه مودم دارم با این مشخصات
Creative
DS1820
000234من از نرم افزار ModemScan استفاده کردم و اینها رو به من گفت:
خروجی فایل ModemData
Only plain text email is forwarded by the Discuss@Linmodems.org List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.24-19-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008
scanModem update of: 2008_11_06
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 058f:6387 Alcor Micro Corp. Transcend JetFlash 110 USB 2.0 Flash Drive (2GB)
USB modems not recognized
For candidate card in slot 02:02.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
02:02.0 125d:2898 148d:1030 Communication controller: ESS Technology ES2898 Modem
Modem interrupt assignment and sharing:
9: 1 IO-APIC-fasteoi acpi
--- Bootup diagnostics for card in PCI slot 02:02.0 ----
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 02:02.0:
Modem chipset detected on
NAME="Communication controller: ESS Technology ES2898 Modem "
CLASS=0780
PCIDEV=125d:2898
SUBSYS=148d:1030
IRQ=9
IDENT=ESS.com
For candidate modem in: 02:02.0
0780 Communication controller: ESS Technology ES2898 Modem
Primary device ID: 125d:2898
Support type needed or chipset: ESS.com
----------------end Softmodem section --------------
ESS chipset 125d:2898 modems are supported. Read DOCs/ESScom.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.2.3
and the compiler used in kernel assembly: 4.2.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.2
linuc_headers base folder /lib/modules/2.6.24-19-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 15:57 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
خروجی فایل scanout
CLASS=0780
NAME="Communication controller: ESS Technology ES2898 Modem "
PCIDEV=125d:2898
SUBSYS=148d:1030
IRQ=9
HDA=
CodecDiagnosed=
slamrTest=
CodecClass=
IDENT=ESS.com
SLMODEMD_DEVICE=
OPTS=
Driver=
و در آخر خروجی فایل ESScom که کاملا گفته فایل setup رو از کجا بگیرید و آن را چطور نصب کنید
Vendor=125d is ESS Technologies, http://www.esstech.com/
The PCI id 125d:2898 modems are under 2.6.n kernels.
The driver resources for 125d:2898 modems should be downloaded
from http://tx.technion.ac.il/~raindel/ess_2.6-v0.3.tar.gz , benefitting
from an update by Jeff Trull. There are brief instructions at http://ubuntuforums.org/showthread.php?t=185079
Under Linux, unpack with:
$ tar zxf ess_2.6-v0.3.tar.gz
Move into the folder wit:
$ cd ess_2.6-v0.3
Browse the files therein and run as Root the:
$ sudo ./setup
The setup program creates a port:
$ ls -l /dev/ttyS_ESS0
crw-rw-rw- 1 root root 62, 64 2006-09-23 23:08 /dev/ttyS_ESS0
and a symbolic link to it:
/dev/modem --> /dev/ttyS_ESS0
Specify either /dev/modem or /dev/ttyS_ESS0 as the modem port for dialer utilities.
A file is installed:
/etc/udev/rules.d/ess.rules , with line:
"KERNEL=\"ttyS_ESS0\", SYMLINK=\"modem\""
which supports automated port creation during driver loading.
If the drivers do not autoload during bootup, they can be loaded by:
$ sudo modprobe esscom
after which the driver interdependencies can be displayed by:
$ lsmod | grep esscom
esscom 16580 0
esscom_hw 421328 1 esscom
linmodems 345678 2 esscom esscom_hw
The modem should be found by:
$ sudo wvdialconf wvtest
See DOCs/wvdial.txt and DOCs/Testing.txt for follow through details.
===============
For 2.4.n Linux kernels and are there some kludges of fading utility:
http://linmodems.technion.ac.il/archive-fourth/msg00317.html (2004Feb08)
http://andrew.cait.org/ess/
http://sidlo.penguin.cz/ES2838/index_en.html
http://tx.technion.ac.il/~raindel/
http://linmodems.technion.ac.il/linmodems/archive/msg04424.html
There was only formal support under for Linux for kernels 2.2.2.
====== end ESS.com section =======
تا اینجا همه چیز درست و من هم مشکلی نداشتم.
خوب وقتی درایور مربوطه رو گرفتم و داخلش شدم طبق README باید setup اونو اجرا کنم پس زدم setup/.
این ارور رو به من میده
mahdi@mahdi-desktop:~/Desktop/ess_2.6-v0.3$ ./setup
checking for running kernel version...2.6.24
checking for gcc...4.2.4
checking for kernel gcc version...4.2.3
** error
installed gcc version 4.2.4 does not match kernel gcc version 4.2.3
installing the kernel driver module is not possible
installing a different version of gcc, or your kernel, is necessary
** compilation error
please read the FAQ about reporting compilation problems
and report this problem. A transcript of the build process
has been saved in make.log. When reporting problems to
the development team, please send us this file.
موضوع: مشکل در نصب creative (حل شد) (دفعات بازدید: 7314 بار)
