گیر کردم تو unity 2D

[بی نام تا اطلاع ثانوی]

سلام دوستان
خسته شدم از بس سرچ کردم و به جواب نرسیدم!
اوبونتو ۱۲.۰۴ دارم و فقط روی 2D میتونم لاگین بشم. گزینه‌ی 3D داره ولی بازم 2D میاد بالا.
چیکارش کنم؟

[Vahid_PC]

واسه من یه بار بعد از نصب درایور گرافیک + کامپیز اینجوری شد.
درست یادم نیست ولی فکر کنم کامپیز و پاک کردم درست شد.

[علیرضاامیرصمیمی]

کارت گرافیکت نصب هست؟

[ساسان]

مدل گرافیک و خروجی این دوتا رو برام بزار:

کد: [انتخاب]

dmesg
glxinfo | grep OpenGL

[بی نام تا اطلاع ثانوی]

واسه من یه بار بعد از نصب درایور گرافیک + کامپیز اینجوری شد.
درست یادم نیست ولی فکر کنم کامپیز و پاک کردم درست شد.

بله منم بعد از نصب کارت گرافیک و کانفیگ bummblebee این بلا سرم اومد.
compiz رو که نباید پاک کرد!

[بی نام تا اطلاع ثانوی]

کارت گرافیکت نصب هست؟

nvidia setting رو میتونم باز کنم و تنظیماتم رو اعمال کنم.

کد: [انتخاب]

zahir@WiLD:~$ lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 635M] (rev ff)
08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
0a:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)
0b:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07)


[بی نام تا اطلاع ثانوی]

مدل گرافیک و خروجی این دوتا رو برام بزار:

کد: [انتخاب]

dmesg
glxinfo | grep OpenGL

مدل گرافیک: nvidia

dmesg:

کد: [انتخاب]

[    2.126904] ACPI: Lid Switch [LID0]
[    2.126984] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    2.126986] ACPI: Power Button [PWRF]
[    2.142959] ACPI: Requesting acpi_cpufreq
[    2.310633] thermal LNXTHERM:00: registered as thermal_zone0
[    2.310638] ACPI: Thermal Zone [TZS0] (61 C)
[    2.310651] [Firmware Bug]: No valid trip found
[    2.442434] thermal LNXTHERM:02: registered as thermal_zone1
[    2.442437] ACPI: Thermal Zone [TZS2] (61 C)
[    2.510331] thermal LNXTHERM:03: registered as thermal_zone2
[    2.510334] ACPI: Thermal Zone [TZS3] (30 C)
[    2.510362] ACPI: Battery Slot [BAT0] (battery absent)
[    2.510410] GHES: HEST is not enabled!
[    2.510414] ACPI: Battery Slot [BAT0] (battery absent)
[    2.510450] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.511253] Linux agpgart interface v0.103
[    2.511990] brd: module loaded
[    2.512358] loop: module loaded
[    2.512415] ahci 0000:00:1f.2: version 3.0
[    2.512463] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    2.526285] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl RAID mode
[    2.526290] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[    2.526298] ahci 0000:00:1f.2: setting latency timer to 64
[    2.534549] scsi0 : ahci
[    2.534592] scsi1 : ahci
[    2.534629] scsi2 : ahci
[    2.534662] scsi3 : ahci
[    2.534696] scsi4 : ahci
[    2.534729] scsi5 : ahci
[    2.534779] ata1: SATA max UDMA/133 abar m2048@0x74617000 port 0x74617100 irq 41
[    2.534780] ata2: DUMMY
[    2.534780] ata3: DUMMY
[    2.534781] ata4: DUMMY
[    2.534783] ata5: SATA max UDMA/133 abar m2048@0x74617000 port 0x74617300 irq 41
[    2.534784] ata6: DUMMY
[    2.534939] Fixed MDIO Bus: probed
[    2.534961] tun: Universal TUN/TAP device driver, 1.6
[    2.534962] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.534988] PPP generic driver version 2.4.2
[    2.535010] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.535035] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.535038] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    2.535041] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.535064] ehci_hcd 0000:00:1a.0: debug port 2
[    2.538951] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    2.538963] ehci_hcd 0000:00:1a.0: irq 16, io mem 0x74619000
[    2.550228] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.550258] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.550262] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.550265] usb usb1: Product: EHCI Host Controller
[    2.550268] usb usb1: Manufacturer: Linux 3.5.0-18-generic ehci_hcd
[    2.550270] usb usb1: SerialNumber: 0000:00:1a.0
[    2.550380] hub 1-0:1.0: USB hub found
[    2.550382] hub 1-0:1.0: 2 ports detected
[    2.550426] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.550429] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    2.550431] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.550448] ehci_hcd 0000:00:1d.0: debug port 2
[    2.554338] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    2.554349] ehci_hcd 0000:00:1d.0: irq 23, io mem 0x74618000
[    2.566207] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.566226] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.566229] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.566231] usb usb2: Product: EHCI Host Controller
[    2.566234] usb usb2: Manufacturer: Linux 3.5.0-18-generic ehci_hcd
[    2.566236] usb usb2: SerialNumber: 0000:00:1d.0
[    2.566346] hub 2-0:1.0: USB hub found
[    2.566348] hub 2-0:1.0: 2 ports detected
[    2.566378] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.566387] uhci_hcd: USB Universal Host Controller Interface driver
[    2.566415] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    2.566418] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.566420] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    2.566501] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.566511] xhci_hcd 0000:00:14.0: irq 21, io mem 0x74600000
[    2.566551] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[    2.566589] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.566590] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.566591] usb usb3: Product: xHCI Host Controller
[    2.566592] usb usb3: Manufacturer: Linux 3.5.0-18-generic xhci_hcd
[    2.566593] usb usb3: SerialNumber: 0000:00:14.0
[    2.566638] xHCI xhci_add_endpoint called for root hub
[    2.566639] xHCI xhci_check_bandwidth called for root hub
[    2.566651] hub 3-0:1.0: USB hub found
[    2.566657] hub 3-0:1.0: 4 ports detected
[    2.566691] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.566694] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    2.566708] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.566709] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.566710] usb usb4: Product: xHCI Host Controller
[    2.566711] usb usb4: Manufacturer: Linux 3.5.0-18-generic xhci_hcd
[    2.566712] usb usb4: SerialNumber: 0000:00:14.0
[    2.566753] xHCI xhci_add_endpoint called for root hub
[    2.566754] xHCI xhci_check_bandwidth called for root hub
[    2.566764] hub 4-0:1.0: USB hub found
[    2.566770] hub 4-0:1.0: 4 ports detected
[    2.566850] usbcore: registered new interface driver libusual
[    2.566873] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.590345] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.590349] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.590407] mousedev: PS/2 mouse device common for all mice
[    2.592617] rtc_cmos 00:06: RTC can wake from S4
[    2.592721] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.592748] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.592785] device-mapper: uevent: version 1.0.3
[    2.592822] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    2.592908] cpuidle: using governor ladder
[    2.593025] cpuidle: using governor menu
[    2.593026] EFI Variables Facility v0.08 2004-May-17
[    2.615338] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    2.853867] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.853946] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.855433] ata5.00: ATAPI: hp      BD CMB UJ160, 1.00, max UDMA/133
[    2.856557] ata5.00: configured for UDMA/133
[    2.860189] ata1.00: ATA-9: ST1000LM024 HN-M101MBB, 2AR20002, max UDMA/133
[    2.860191] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.861787] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    2.866539] ata1.00: configured for UDMA/133
[    2.866698] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 2AR2 PQ: 0 ANSI: 5
[    2.866862] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.867077] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.867080] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.867287] sd 0:0:0:0: [sda] Write Protect is off
[    2.867290] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.867386] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.918809]  sda: sda1 sda2 sda3 sda4
[    2.919747] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.921079] scsi 4:0:0:0: CD-ROM            hp       BD CMB UJ160     1.00 PQ: 0 ANSI: 5
[    2.923360] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.923362] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.923483] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.923593] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    2.993973] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.993977] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.994251] hub 1-1:1.0: USB hub found
[    2.994338] hub 1-1:1.0: 6 ports detected
[    3.048427] Refined TSC clocksource calibration: 2394.559 MHz.
[    3.048431] Switching to clocksource tsc
[    3.105404] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    3.237590] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    3.237595] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.237869] hub 2-1:1.0: USB hub found
[    3.237960] hub 2-1:1.0: 8 ports detected
[    3.305796] ashmem: initialized
[    3.305969] TCP: cubic registered
[    3.306037] NET: Registered protocol family 10
[    3.306173] NET: Registered protocol family 17
[    3.306183] Key type dns_resolver registered
[    3.306577] PM: Hibernation image not present or could not be loaded.
[    3.306585] registered taskstats version 1
[    3.308458] Key type trusted registered
[    3.309233] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
[    3.310079] Key type encrypted registered
[    3.311848]   Magic number: 9:14:265
[    3.311974] rtc_cmos 00:06: setting system clock to 2013-12-23 05:16:56 UTC (1387775816)
[    3.312932] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.312933] EDD information not available.
[    3.313891] Freeing unused kernel memory: 944k freed
[    3.313972] Write protecting the kernel read-only data: 12288k
[    3.316551] Freeing unused kernel memory: 1356k freed
[    3.318588] Freeing unused kernel memory: 1060k freed
[    3.329006] udevd[131]: starting version 175
[    3.375791] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.375919] r8169 0000:0b:00.0: irq 43 for MSI/MSI-X
[    3.376054] r8169 0000:0b:00.0: eth0: RTL8168evl/8111evl at 0xffffc9000007a000, a0:b3:cc:50:c5:17, XID 0c900800 IRQ 43
[    3.376056] r8169 0000:0b:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.402255] usb 1-1.1: New USB device found, idVendor=138a, idProduct=0018
[    3.402262] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    3.402266] usb 1-1.1: SerialNumber: 16a462c27307
[    3.473023] usb 1-1.2: new full-speed USB device number 4 using ehci_hcd
[    3.566860] usb 1-1.2: New USB device found, idVendor=09da, idProduct=054f
[    3.566866] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.566869] usb 1-1.2: Product: USB Device
[    3.566872] usb 1-1.2: Manufacturer: A4TECH
[    3.571657] usbcore: registered new interface driver usbhid
[    3.571662] usbhid: USB HID core driver
[    3.572972] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input3
[    3.573216] hid-generic 0003:09DA:054F.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1a.0-1.2/input0
[    3.573290] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input4
[    3.573403] hid-generic 0003:09DA:054F.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1a.0-1.2/input1
[    3.636771] usb 1-1.3: new high-speed USB device number 5 using ehci_hcd
[    3.782811] usb 1-1.3: New USB device found, idVendor=064e, idProduct=c334
[    3.782817] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.782820] usb 1-1.3: Product: HP Truevision HD
[    3.782823] usb 1-1.3: Manufacturer: SuYin
[    3.782825] usb 1-1.3: SerialNumber: HF1016-P62A-OV01-VH-R04.00.06
[    3.883523] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.920359] usb 2-1.6: new full-speed USB device number 3 using ehci_hcd
[    4.016323] usb 2-1.6: New USB device found, idVendor=8087, idProduct=07da
[    4.016329] usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   15.283474] Adding 7813116k swap on /dev/sda2.  Priority:-1 extents:1 across:7813116k
[   15.286116] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.297770] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   15.298033] udevd[504]: starting version 175
[   15.323480] lp: driver loaded but no devices found
[   15.323777] [drm] Initialized drm 1.1.0 20060810
[   15.326877] checking generic (60000000 410000) vs hw (0 0)
[   15.326883] i915 0000:00:02.0: setting latency timer to 64
[   15.327290] pci 0000:00:00.0: Intel Ivybridge Chipset
[   15.327349] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[   15.328333] pci 0000:00:00.0: detected 65536K stolen memory
[   15.330093] hp_accel: laptop model unknown, using default axes configuration
[   15.343486] cfg80211: Calling CRDA to update world regulatory domain
[   15.348117] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[   15.348120] iwlwifi: Copyright(c) 2003-2012 Intel Corporation
[   15.348295] iwlwifi 0000:0a:00.0: pci_resource_len = 0x00002000
[   15.348298] iwlwifi 0000:0a:00.0: pci_resource_base = ffffc90011184000
[   15.348300] iwlwifi 0000:0a:00.0: HW Revision ID = 0xC4
[   15.348441] iwlwifi 0000:0a:00.0: irq 44 for MSI/MSI-X
[   15.355090] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[   15.355100] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   15.355101] [drm] Driver supports precise vblank timestamp query.
[   15.355703] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   15.355706] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[   15.404390] Linux video capture interface: v2.00
[   15.405928] uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:c334)
[   15.410011] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[   15.414869] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input5
[   15.414926] usbcore: registered new interface driver uvcvideo
[   15.414928] USB Video Class driver (1.1.1)
[   15.426444] Bluetooth: Core ver 2.16
[   15.426459] NET: Registered protocol family 31
[   15.426460] Bluetooth: HCI device and connection manager initialized
[   15.426462] Bluetooth: HCI socket layer initialized
[   15.426463] Bluetooth: L2CAP socket layer initialized
[   15.426466] Bluetooth: SCO socket layer initialized
[   15.427504] usbcore: registered new interface driver btusb
[   15.445716] type=1400 audit(1387775828.646:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=807 comm="apparmor_parser"
[   15.445756] type=1400 audit(1387775828.646:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=683 comm="apparmor_parser"
[   15.445960] type=1400 audit(1387775828.646:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=807 comm="apparmor_parser"
[   15.446058] type=1400 audit(1387775828.646:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=683 comm="apparmor_parser"
[   15.446097] type=1400 audit(1387775828.646:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=807 comm="apparmor_parser"
[   15.446242] type=1400 audit(1387775828.646:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=683 comm="apparmor_parser"
[   15.446326] cfg80211: World regulatory domain updated:
[   15.446328] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   15.446329] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.446331] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.446333] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.446334] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.446335] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.483923] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[   15.484492] iwlwifi 0000:0a:00.0: loaded firmware version 18.168.6.1
[   15.484658] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   15.484659] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   15.484660] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   15.484661] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[   15.484662] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_P2P disabled
[   15.484663] iwlwifi 0000:0a:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[   15.484760] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
[   15.485039] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[   15.485828] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[   15.486523] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
[   15.487261] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
[   15.488021] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
[   15.488732] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
[   15.489459] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   15.492268] iwlwifi 0000:0a:00.0: RF_KILL bit toggled to enable radio.
[   15.501190] iwlwifi 0000:0a:00.0: device EEPROM VER=0x81c, CALIB=0x6
[   15.501191] iwlwifi 0000:0a:00.0: Device SKU: 0x150
[   15.501193] iwlwifi 0000:0a:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
[   15.501202] iwlwifi 0000:0a:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[   15.501341] Registered led device: phy0-led
[   15.501370] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   15.502857] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   15.522999] lis3lv02d: 8 bits 3DC sensor found
[   15.600474] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   15.734709] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[   15.735001] Registered led device: hp::hddprotect
[   15.735017] hp_accel: driver loaded
[   15.735304] wmi: Mapper loaded
[   15.857021] init: failsafe main process (984) killed by TERM signal
[   15.964747] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[   16.061692] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.061695] Bluetooth: BNEP filters: protocol multicast
[   16.064216] Bluetooth: RFCOMM TTY layer initialized
[   16.064220] Bluetooth: RFCOMM socket layer initialized
[   16.064221] Bluetooth: RFCOMM ver 1.11
[   16.088419] ppdev: user-space parallel port driver
[   16.094168] type=1400 audit(1387775829.298:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1071 comm="apparmor_parser"
[   16.094440] type=1400 audit(1387775829.298:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1071 comm="apparmor_parser"
[   16.157108] checking generic (60000000 410000) vs hw (60000000 10000000)
[   16.157111] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[   16.157131] Console: switching to colour dummy device 80x25
[   16.157254] fbcon: inteldrmfb (fb0) is primary device
[   16.157318] Console: switching to colour frame buffer device 170x48
[   16.157337] fb0: inteldrmfb frame buffer device
[   16.157338] drm: registered panic notifier
[   16.157512] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   16.206301] input: HP WMI hotkeys as /devices/virtual/input/input7
[   16.258391] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
[   16.265917] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
[   16.409786] acpi device:39: registered as cooling_device8
[   16.409924] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[   16.409972] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:37/LNXVIDEO:00/input/input8
[   16.430414] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00
[   16.494424] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[   16.530472] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
[   16.537994] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
[   16.619022] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.619828] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.705489] acpi device:45: registered as cooling_device9
[   16.710092] r8169 0000:0b:00.0: eth0: link down
[   16.710545] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.710740] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.737409] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   16.737471] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10
[   16.737578] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   16.737614] mei 0000:00:16.0: setting latency timer to 64
[   16.737701] mei 0000:00:16.0: irq 46 for MSI/MSI-X
[   16.741364] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   16.747902] mei 0000:00:16.0: wd: failed to find the client
[   17.065703] type=1400 audit(1387775830.270:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1120 comm="apparmor_parser"
[   17.065751] type=1400 audit(1387775830.270:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1117 comm="apparmor_parser"
[   17.127486] init: alsa-restore main process (1159) terminated with status 19
[   17.137788] init: lightdm main process (1195) killed by TERM signal
[   17.304827] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   17.304943] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   17.305051] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   17.305623] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   17.305628] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.305629] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[   17.305632] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   17.305634] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.305638] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[   17.305642] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SB_.GPIO 2 (20120320/utaddress-251)
[   17.305645] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20120320/utaddress-251)
[   17.305647] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.305649] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   17.334914] vboxdrv: Found 8 processor cores.
[   17.335103] vboxdrv: fAsync=0 offMin=0xf9 offMax=0x239a
[   17.335155] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   17.335157] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
[   17.340471] vboxpci: IOMMU not found (not registered)
[   17.903928] bbswitch: version 0.8
[   17.903933] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   17.903937] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[   17.903988] bbswitch: detected an Optimus _DSM function
[   17.904004] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[   17.904026] pci 0000:01:00.0: power state changed by ACPI to D0
[   17.904029] pci 0000:01:00.0: power state changed by ACPI to D0
[   17.904032] pci 0000:01:00.0: enabling device (0006 -> 0007)
[   17.904036] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[   17.905306] bbswitch: disabling discrete graphics
[   17.919942] pci 0000:01:00.0: power state changed by ACPI to D3
[   18.761611] wlan0: authenticate with b0:48:7a:e8:b4:20
[   18.768640] wlan0: send auth to b0:48:7a:e8:b4:20 (try 1/3)
[   18.771015] wlan0: authenticated
[   18.774155] wlan0: associate with b0:48:7a:e8:b4:20 (try 1/3)
[   18.776917] wlan0: RX AssocResp from b0:48:7a:e8:b4:20 (capab=0x411 status=0 aid=1)
[   18.779749] wlan0: associated
[   18.780275] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   18.780338] cfg80211: Calling CRDA for country: US
[   18.782572] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   18.782574] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   18.782575] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   18.782576] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   18.782577] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   18.782578] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   18.782578] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   18.782579] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   18.782580] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   18.782581] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   18.782582] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   18.782583] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   18.782583] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   18.782584] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   18.782585] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   18.782586] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   18.782587] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   18.782587] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   18.782588] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   18.782589] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   18.782590] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   18.782591] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   18.782591] cfg80211: Disabling freq 2467 MHz
[   18.782592] cfg80211: Disabling freq 2472 MHz
[   18.782594] cfg80211: Regulatory domain changed to country: US
[   18.782594] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.782595] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   18.782596] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   18.782597] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.782598] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.782599] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.782599] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   40.195988] audit_printk_skb: 48 callbacks suppressed
[   40.195994] type=1400 audit(1387775853.429:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1072 comm="cupsd" pid=1072 comm="cupsd" capability=36  capname="block_suspend"
[  321.082884] type=1400 audit(1387776134.596:29): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1072 comm="cupsd" pid=1072 comm="cupsd" capability=36  capname="block_suspend"
[  886.682781] type=1400 audit(1387776700.914:30): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1072 comm="cupsd" pid=1072 comm="cupsd" capability=36  capname="block_suspend"
glxinfo | grep OpenGL:

کد: [انتخاب]

Gen6+ requires Kernel 3.6 or later.
glxinfo: ../../../../../src/mesa/main/context.c:1501: _mesa_make_current: Assertion `newCtx->Version > 0' failed.

[بی نام تا اطلاع ثانوی]

gnome و gnome-shell رو کامل نصب کردم ولی ظاهر gnome با gnome clasic مثل هم هست 
کارت گرافیکم که نصبه پس چرا اجازه‌ی استفاده کردن از effect ها رو بهم نمیده؟نه تو gnome نه تو unity

[ساسان]

برای راه اندازی گرافیک نسل سوم اینتل به کرنل ۳.۶ یا بالاتر احتیاج داری. یا کرنل توزیعت رو آپدیت کن یا فدورا ۲۰ یا اوبونتو ۱۳.۱۰ نصب کن.

[siavash_siavash]

درسته...، ظهیر جان یا اون کاری که ساسان گفت بکن، یا اینکه اگه نمیخوای سیستم عاملتو عوض کنی، آخرین درایور کارتت رو از سایت شرکت سازندش (منظورم وبسایت برندش نیست، منظورم وبسایت انویدیا یا AMD یا اینتل، هرچی که هست) دانلود و نصب کن، درایور آزاد بعضی جاها خوب جواب نمیده، مخصوصأ ورژنهای قدیمیش.

[Ma3X]

یا اینکه اگه نمیخوای سیستم عاملتو عوض کنی، آخرین درایور کارتت رو از سایت شرکت سازندش (منظورم وبسایت برندش نیست، منظورم وبسایت انویدیا یا AMD یا اینتل، هرچی که هست) دانلود و نصب کن، درایور آزاد بعضی جاها خوب جواب نمیده، مخصوصأ ورژنهای قدیمیش.

خراب‌ترش کردی که!
آخرین نسخه درایور انویدیا به کرنل 3.12 احتیاج داره.

[siavash_siavash]

خراب‌ترش کردی که!
آخرین نسخه درایور انویدیا به کرنل 3.12 احتیاج داره.

واقعا؟؟ خب من اینو نمیدونستم، معذرت میخوام.
اگه اینطور باشه خیلی نافرمه که...! خیلیها مجبور میشن کرنلشون رو آپگرید کنن و هزار و یک مشکل احتمالی.
راستی... اگه بجای آخرین نسخۀ انویدیا، از نسخه های ماقبلِ آخر استفاده کنه چی؟ بازم کرنل 3.12 میخواد؟ بهرحال اون میخواد یونیتی سه بعدی رو داشته باشه، واسش مهم نیست که درایورش حتمأ آخرین ورژن باشه.

[ساسان]

درسته...، ظهیر جان یا اون کاری که ساسان گفت بکن، یا اینکه اگه نمیخوای سیستم عاملتو عوض کنی، آخرین درایور کارتت رو از سایت شرکت سازندش (منظورم وبسایت برندش نیست، منظورم وبسایت انویدیا یا AMD یا اینتل، هرچی که هست) دانلود و نصب کن، درایور آزاد بعضی جاها خوب جواب نمیده، مخصوصأ ورژنهای قدیمیش.

اینتل فقط درایور اوپن سورس برای لینوکس داره که کیفیتش فوق‌العاده است. بخش عظم درایورش هم توی کرنل قرار داره پس راهی به جز نصب  کرنل جدید وجود نداره.

[Ma3X]

اگه اینطور باشه خیلی نافرمه که...! خیلیها مجبور میشن کرنلشون رو آپگرید کنن و هزار و یک مشکل احتمالی.
راستی... اگه بجای آخرین نسخۀ انویدیا، از نسخه های ماقبلِ آخر استفاده کنه چی؟ بازم کرنل 3.12 میخواد؟ بهرحال اون میخواد یونیتی سه بعدی رو داشته باشه،

AMD رو نمی‌دونم ولی nVIDIA درایورش تو نسخه‌های مختلفی توسعه داده می‌شه مثل «304» و «آخرین نسخه (فعلا ۳۳۱)» یه چیز تو مایه‌های پایتون ۲ و ۳ یا کیوت ۴ و ۵ که با هم توسعه داده می‌شن.

واسش مهم نیست که درایورش حتمأ آخرین ورژن باشه.

آخه تو گفتی آخرین نسخه درایور... 

[ساسان]

AMD رو نمی‌دونم ولی nVIDIA درایورش تو نسخه‌های مختلفی توسعه داده می‌شه مثل «304» و «آخرین نسخه (فعلا ۳۳۱)» یه چیز تو مایه‌های پایتون ۲ و ۳ یا کیوت ۴ و ۵ که با هم توسعه داده می‌شن.

این طوری نیست که کرنل ۳.۱۲ رو بخواد، آخرین نسخه‌هاش از کرنل ۳.۱۲ پشتیبانی می‌کنن. چون xorg server و کرنل ABI ثابت ندارن با هر انتشار عمده کرنل، Nvidia باید درایورش رو به‌روز کنه.