اقا من یه کارهایی کردم که خودمم نمیدونم چیکار راستشو بخوای الان با دستور sudo wvdialconf /etc/wvdial.confاینو خروجی میده!
[left][left]Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: Scanning ttySHSF0 first, /dev/modem is a link to it.
ttySHSF0<*1>: ATQ0 V1 E1 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 Z -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttySHSF0<*1>: Modem Identifier: ATI -- 56000
ttySHSF0<*1>: Speed 4800: AT -- OK
ttySHSF0<*1>: Speed 9600: AT -- OK
ttySHSF0<*1>: Speed 19200: AT -- OK
ttySHSF0<*1>: Speed 38400: AT -- OK
ttySHSF0<*1>: Speed 57600: AT -- OK
ttySHSF0<*1>: Speed 115200: AT -- OK
ttySHSF0<*1>: Speed 230400: AT -- OK
ttySHSF0<*1>: Speed 460800: AT -- OK
ttySHSF0<*1>: Max speed is 460800; that should be safe.
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3 SHSF1 SHSF2 SHSF3 SHSF4 SHSF5
Modem Port Scan<*1>: SHSF6 SHSF7
Found a modem on /dev/ttySHSF0, using link /dev/modem in config.
Modem configuration written to /etc/wvdial.conf.
ttySHSF0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"[/left][/left]
موضوع: مشکل با درایور alsa[حل شد] (دفعات بازدید: 3409 بار)
