سلام
من یه کارت تی وی msi دارم . توی انجمن خیلی گشتم .البته خیلیا به نتیجه نرسیده بودن . تنها چیزی که فهمیدم اینه که اول باید خروجی این دو تا دستور رو بزارم lspci و dmesg و اینکه سعی کنم از نرم افزارای tv time و kdetv تصویر بگیرم .
خروجی lspci
00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:06.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
01:02.0 Communication controller: Conexant Systems, Inc. HCF 56k Data/Fax/Voice/Spkp Modem (Worldwide) (rev 08)
06:00.0 VGA compatible controller: nVidia Corporation GeForce 8500 GT (rev a1)
این هم خروجی dmesg
fffff
[ 0.481559] pci 0000:00:06.0: setting latency timer to 64
[ 0.481563] pci 0000:00:0b.0: setting latency timer to 64
[ 0.481567] pci 0000:00:0c.0: setting latency timer to 64
[ 0.481570] pci 0000:00:0d.0: setting latency timer to 64
[ 0.481574] pci 0000:00:0e.0: setting latency timer to 64
[ 0.481578] pci 0000:00:0f.0: setting latency timer to 64
[ 0.481580] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.481582] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.481584] bus: 01 index 0 io port: [0xd000-0xdfff]
[ 0.481586] bus: 01 index 1 mmio: [0xf9f00000-0xf9ffffff]
[ 0.481587] bus: 01 index 2 mmio: [0x0-0x0]
[ 0.481589] bus: 01 index 3 io port: [0x00-0xffff]
[ 0.481590] bus: 01 index 4 mmio: [0x000000-0xffffffff]
[ 0.481592] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.481593] bus: 02 index 1 mmio: [0x0-0x0]
[ 0.481595] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.481596] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.481597] bus: 03 index 0 mmio: [0x0-0x0]
[ 0.481599] bus: 03 index 1 mmio: [0x0-0x0]
[ 0.481600] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.481602] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.481603] bus: 04 index 0 mmio: [0x0-0x0]
[ 0.481604] bus: 04 index 1 mmio: [0x0-0x0]
[ 0.481606] bus: 04 index 2 mmio: [0x0-0x0]
[ 0.481607] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.481608] bus: 05 index 0 mmio: [0x0-0x0]
[ 0.481610] bus: 05 index 1 mmio: [0x0-0x0]
[ 0.481611] bus: 05 index 2 mmio: [0x0-0x0]
[ 0.481613] bus: 05 index 3 mmio: [0x0-0x0]
[ 0.481614] bus: 06 index 0 io port: [0xe000-0xefff]
[ 0.481616] bus: 06 index 1 mmio: [0xfa000000-0xfebfffff]
[ 0.481617] bus: 06 index 2 mmio: [0xa0000000-0xbfffffff]
[ 0.481619] bus: 06 index 3 mmio: [0x0-0x0]
[ 0.481628] NET: Registered protocol family 2
[ 0.496053] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.496300] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.496917] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.497252] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.497254] TCP reno registered
[ 0.504085] NET: Registered protocol family 1
[ 0.504208] checking if image is initramfs... it is
[ 1.000788] Freeing initrd memory: 7599k freed
[ 1.000979] cpufreq: No nForce2 chipset.
[ 1.001097] audit: initializing netlink socket (disabled)
[ 1.001114] type=2000 audit(1260961184.000:1): initialized
[ 1.007650] highmem bounce pool size: 64 pages
[ 1.007655] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.008645] VFS: Disk quotas dquot_6.5.1
[ 1.008689] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.009184] fuse init (API version 7.10)
[ 1.009245] msgmni has been set to 1685
[ 1.009420] alg: No test for stdrng (krng)
[ 1.009431] io scheduler noop registered
[ 1.009432] io scheduler anticipatory registered
[ 1.009434] io scheduler deadline registered
[ 1.009446] io scheduler cfq registered (default)
[ 1.009472] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.009561] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 1.009573] pci 0000:00:05.1: Enabling HT MSI Mapping
[ 1.009585] pci 0000:00:05.2: Enabling HT MSI Mapping
[ 1.009596] pci 0000:00:06.0: Enabling HT MSI Mapping
[ 1.009609] pci 0000:00:06.1: Enabling HT MSI Mapping
[ 1.009623] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.009637] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.009649] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 1.009661] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 1.009673] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 1.009686] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 1.009698] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 1.009719] pci 0000:06:00.0: Boot video device
[ 1.015770] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 1.015791] pcieport-driver 0000:00:0b.0: found MSI capability
[ 1.015805] pcieport-driver 0000:00:0b.0: irq 2303 for MSI/MSI-X
[ 1.015811] pci_express 0000:00:0b.0:pcie00: allocate port service
[ 1.015822] pci_express 0000:00:0b.0:pcie03: allocate port service
[ 1.015851] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.015869] pcieport-driver 0000:00:0c.0: found MSI capability
[ 1.015879] pcieport-driver 0000:00:0c.0: irq 2302 for MSI/MSI-X
[ 1.015884] pci_express 0000:00:0c.0:pcie00: allocate port service
[ 1.015894] pci_express 0000:00:0c.0:pcie03: allocate port service
[ 1.015922] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 1.015940] pcieport-driver 0000:00:0d.0: found MSI capability
[ 1.015951] pcieport-driver 0000:00:0d.0: irq 2301 for MSI/MSI-X
[ 1.015956] pci_express 0000:00:0d.0:pcie00: allocate port service
[ 1.015965] pci_express 0000:00:0d.0:pcie03: allocate port service
[ 1.015994] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[ 1.016020] pcieport-driver 0000:00:0e.0: found MSI capability
[ 1.016030] pcieport-driver 0000:00:0e.0: irq 2300 for MSI/MSI-X
[ 1.016035] pci_express 0000:00:0e.0:pcie00: allocate port service
[ 1.016047] pci_express 0000:00:0e.0:pcie03: allocate port service
[ 1.016076] pcieport-driver 0000:00:0f.0: setting latency timer to 64
[ 1.016094] pcieport-driver 0000:00:0f.0: found MSI capability
[ 1.016104] pcieport-driver 0000:00:0f.0: irq 2299 for MSI/MSI-X
[ 1.016109] pci_express 0000:00:0f.0:pcie00: allocate port service
[ 1.016119] pci_express 0000:00:0f.0:pcie03: allocate port service
[ 1.016156] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.016164] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.016282] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.016284] ACPI: Power Button (FF) [PWRF]
[ 1.016327] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.016329] ACPI: Power Button (CM) [PWRB]
[ 1.016536] processor ACPI_CPU:00: registered as cooling_device0
[ 1.016560] processor ACPI_CPU:01: registered as cooling_device1
[ 1.020228] isapnp: Scanning for PnP cards...
[ 1.372737] isapnp: No Plug & Play device found
[ 1.381204] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.381288] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.381370] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.381574] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.382208] brd: module loaded
[ 1.382455] loop: module loaded
[ 1.382511] Fixed MDIO Bus: probed
[ 1.382516] PPP generic driver version 2.4.2
[ 1.382561] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.382585] Driver 'sd' needs updating - please use bus_type methods
[ 1.382593] Driver 'sr' needs updating - please use bus_type methods
[ 1.382753] sata_nv 0000:00:05.0: version 3.5
[ 1.383031] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 1.383041] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 1.383044] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 1.383277] sata_nv 0000:00:05.0: setting latency timer to 64
[ 1.383447] scsi0 : sata_nv
[ 1.383543] scsi1 : sata_nv
[ 1.383665] ata1: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xbc00 irq 23
[ 1.383667] ata2: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xbc08 irq 23
[ 2.260034] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.307766] ata1.00: ATA-7: MAXTOR STM3250820AS, 3.AAE, max UDMA/133
[ 2.307769] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.374414] ata1.00: configured for UDMA/133
[ 3.106203] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.106309] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM325082 3.AA PQ: 0 ANSI: 5
[ 3.106386] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 3.106400] sd 0:0:0:0: [sda] Write Protect is off
[ 3.106402] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.106420] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.106479] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 3.106489] sd 0:0:0:0: [sda] Write Protect is off
[ 3.106491] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.106509] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.106512] sda: sda1 sda2 sda3 sda4
[ 3.122608] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.122648] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.122935] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[ 3.122944] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[ 3.122946] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 3.123173] sata_nv 0000:00:05.1: setting latency timer to 64
[ 3.123328] scsi2 : sata_nv
[ 3.123387] scsi3 : sata_nv
[ 3.123498] ata3: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb080 irq 22
[ 3.123500] ata4: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xb088 irq 22
[ 3.854203] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.586201] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.586471] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21
[ 4.586477] sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 21 (level, low) -> IRQ 21
[ 4.586480] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 4.586694] sata_nv 0000:00:05.2: setting latency timer to 64
[ 4.586856] scsi4 : sata_nv
[ 4.586924] scsi5 : sata_nv
[ 4.587037] ata5: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 21
[ 4.587039] ata6: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 21
[ 5.464033] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.472116] ata5.00: ATAPI: BENQ DVD DC DW205S, 7B3D, max UDMA/100
[ 5.488123] ata5.00: configured for UDMA/100
[ 6.222200] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.223199] scsi 4:0:0:0: CD-ROM BENQ DVD DC DW205S 7B3D PQ: 0 ANSI: 5
[ 6.228881] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.228884] Uniform CD-ROM driver Revision: 3.20
[ 6.228984] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 6.229031] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 6.229113] pata_amd 0000:00:04.0: version 0.3.10
[ 6.229148] pata_amd 0000:00:04.0: setting latency timer to 64
[ 6.229221] scsi6 : pata_amd
[ 6.229281] scsi7 : pata_amd
[ 6.230314] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 6.230317] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 6.600244] ata7.00: ATAPI: SONY CD-ROM CDU5232, VER 0S09, max UDMA/33
[ 6.600266] ata7.01: ATAPI: HP Combo 535d, RPK2, max UDMA/33
[ 6.600284] ata7: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x15)
[ 6.600288] ata7: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x15)
[ 6.632188] ata7.00: configured for UDMA/33
[ 6.664186] ata7.01: configured for UDMA/33
[ 6.666581] ata8: port disabled. ignoring.
[ 6.671120] scsi 6:0:0:0: CD-ROM SONY CD-ROM CDU5232 0S09 PQ: 0 ANSI: 5
[ 6.675786] sr1: scsi3-mmc drive: 4x/40x cd/rw xa/form2 cdda tray
[ 6.675834] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 6.675862] sr 6:0:0:0: Attached scsi generic sg2 type 5
[ 6.677012] scsi 6:0:1:0: CD-ROM HP Combo 535d RPK2 PQ: 0 ANSI: 5
[ 6.682756] sr2: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda tray
[ 6.682804] sr 6:0:1:0: Attached scsi CD-ROM sr2
[ 6.682835] sr 6:0:1:0: Attached scsi generic sg3 type 5
[ 6.683245] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.683517] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[ 6.683521] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
[ 6.683538] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 6.683540] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 6.683587] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 6.683609] ehci_hcd 0000:00:02.1: debug port 1
[ 6.683612] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 6.683617] ehci_hcd 0000:00:02.1: irq 23, io mem 0xf9efac00
[ 6.692017] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 6.692075] usb usb1: configuration #1 chosen from 1 choice
[ 6.692099] hub 1-0:1.0: USB hub found
[ 6.692106] hub 1-0:1.0: 10 ports detected
[ 6.692189] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.692443] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
[ 6.692445] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
[ 6.692453] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 6.692455] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 6.692493] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 6.692504] ohci_hcd 0000:00:02.0: irq 22, io mem 0xf9efb000
[ 6.750045] usb usb2: configuration #1 chosen from 1 choice
[ 6.750062] hub 2-0:1.0: USB hub found
[ 6.750070] hub 2-0:1.0: 10 ports detected
[ 6.750150] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.750201] usbcore: registered new interface driver libusual
[ 6.750225] usbcore: registered new interface driver usbserial
[ 6.750234] USB Serial support registered for generic
[ 6.750243] usbcore: registered new interface driver usbserial_generic
[ 6.750245] usbserial: USB Serial Driver core
[ 6.750284] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 6.752627] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.752632] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 6.757033] mice: PS/2 mouse device common for all mice
[ 6.769058] rtc_cmos 00:02: RTC can wake from S4
[ 6.769087] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 6.769120] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 6.769168] device-mapper: uevent: version 1.0.3
[ 6.769242] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 6.769364] device-mapper: multipath: version 1.0.5 loaded
[ 6.769366] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 6.769450] EISA: Probing bus 0 at eisa.0
[ 6.769457] Cannot allocate resource for EISA slot 2
[ 6.769470] EISA: Detected 0 cards.
[ 6.769555] cpuidle: using governor ladder
[ 6.769556] cpuidle: using governor menu
[ 6.769943] TCP cubic registered
[ 6.770018] NET: Registered protocol family 10
[ 6.770338] lo: Disabled Privacy Extensions
[ 6.770580] NET: Registered protocol family 17
[ 6.770595] Bluetooth: L2CAP ver 2.11
[ 6.770596] Bluetooth: L2CAP socket layer initialized
[ 6.770599] Bluetooth: SCO (Voice Link) ver 0.6
[ 6.770600] Bluetooth: SCO socket layer initialized
[ 6.770638] Bluetooth: RFCOMM socket layer initialized
[ 6.770643] Bluetooth: RFCOMM TTY layer initialized
[ 6.770644] Bluetooth: RFCOMM ver 1.10
[ 6.770688] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ processors (2 cpu cores) (version 2.20.00)
[ 6.770712] [Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor.
[ 6.770792] [Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor.
[ 6.770867] Using IPI No-Shortcut mode
[ 6.770923] registered taskstats version 1
[ 6.771055] Magic number: 5:740:982
[ 6.771150] rtc_cmos 00:02: setting system clock to 2009-12-16 10:59:50 UTC (1260961190)
[ 6.771153] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 6.771154] EDD information not available.
[ 6.771468] Freeing unused kernel memory: 532k freed
[ 6.771594] Write protecting the kernel text: 4128k
[ 6.771639] Write protecting the kernel read-only data: 1532k
[ 6.787498] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 6.841368] compcache: Compressed swap size set to: 644844 KB
[ 6.842141] TLSF: pool: f7db9000, init_size=16384, max_size=0, grow_size=16384
[ 6.990872] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 6.991183] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 6.991194] forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[ 6.991199] forcedeth 0000:00:08.0: setting latency timer to 64
[ 6.991287] nv_probe: set workaround bit for reversed mac addr
[ 7.184835] Adding 644840k swap on /dev/ramzswap0. Priority:100 extents:1 across:644840k
[ 7.420017] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 7.513779] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x1c1 @ 0, addr 00:16:17:eb:48:86
[ 7.513782] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 7.514091] ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 20
[ 7.514095] forcedeth 0000:00:09.0: PCI INT A -> Link[LMAD] -> GSI 20 (level, low) -> IRQ 20
[ 7.514099] forcedeth 0000:00:09.0: setting latency timer to 64
[ 7.514171] nv_probe: set workaround bit for reversed mac addr
[ 7.633098] usb 2-1: configuration #1 chosen from 1 choice
[ 7.940015] usb 2-8: new full speed USB device using ohci_hcd and address 3
[ 8.033817] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x1c1 @ 1, addr 00:16:17:d8:10:ee
[ 8.033820] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 8.164111] usb 2-8: configuration #1 chosen from 1 choice
[ 8.174775] usbcore: registered new interface driver hiddev
[ 8.182096] input: HID 0458:703e as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.3/input/input4
[ 8.188085] generic-usb 0003:0458:703E.0001: input,hidraw0: USB HID v1.00 Device [HID 0458:703e] on usb-0000:00:02.0-8/input3
[ 8.188103] usbcore: registered new interface driver usbhid
[ 8.188105] usbhid: v2.6:USB HID core driver
[ 8.279403] PM: Starting manual resume from disk
[ 8.279407] PM: Resume from partition 8:1
[ 8.279408] PM: Checking hibernation image.
[ 8.279564] PM: Resume from disk failed.
[ 8.289133] EXT4-fs: barriers enabled
[ 8.300388] kjournald2 starting. Commit interval 5 seconds
[ 8.300399] EXT4-fs: delayed allocation enabled
[ 8.300400] EXT4-fs: file extents enabled
[ 8.302303] EXT4-fs: mballoc enabled
[ 8.302307] EXT4-fs: mounted filesystem with ordered data mode.
[ 11.581414] udev: starting version 141
[ 11.915722] parport_pc 00:07: reported by Plug and Play ACPI
[ 11.915769] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 11.956800] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 11.956902] usbcore: registered new interface driver btusb
[ 11.980318] Linux agpgart interface v0.103
[ 12.152291] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
[ 12.152325] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00
[ 12.435331] Linux video capture interface: v2.00
[ 12.448148] ppdev: user-space parallel port driver
[ 12.569125] nvidia: module license 'NVIDIA' taints kernel.
[ 12.663350] ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ff000000-0x00000000ffffffff - kernel bug?
[ 12.743854] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 12.744325] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[ 12.744338] saa7134 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
[ 12.744344] saa7133[0]: found at 0000:01:00.0, rev: 209, irq: 19, latency: 64, mmio: 0xf9fff800
[ 12.744349] saa7133[0]: subsystem: 1462:6231, board: MSI TV@Anywhere plus [card=82,autodetected]
[ 12.744401] saa7133[0]: board init: gpio is 40
[ 12.787333] Found: PMC Pm49FL004
[ 12.787342] ck804xrom @fff80000: Found 1 x8 devices at 0x0 in 8-bit bank
[ 12.824479] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 18
[ 12.824492] nvidia 0000:06:00.0: PCI INT A -> Link[LNEB] -> GSI 18 (level, low) -> IRQ 18
[ 12.824500] nvidia 0000:06:00.0: setting latency timer to 64
[ 12.826138] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 12.833954] number of JEDEC chips: 1
[ 12.833957] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
[ 12.855349] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 12.855355] HDA Intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 12.855400] HDA Intel 0000:00:06.1: setting latency timer to 64
[ 12.866353] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 12.892014] saa7133[0]: i2c eeprom 00: 62 14 31 62 10 28 ff ff ff ff ff ff ff ff ff ff
[ 12.892022] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.892029] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.892035] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.892042] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.892048] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.892055] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.892061] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.892068] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.892074] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.892080] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.892087] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.892093] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.892100] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.892106] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.892113] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 12.984100] tuner' 2-004b: chip found @ 0x96 (saa7133[0])
[ 13.046504] usbcore: registered new interface driver snd-usb-audio
[ 13.064013] tda829x 2-004b: setting tuner address to 61
[ 13.140023] tda829x 2-004b: type set to tda8290+75a
[ 13.292392] psmouse serio1: ID: 10 00 64<6>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 17.008166] input: MSI TV@nywhere Plus as /devices/virtual/input/input6
[ 17.013106] ir-kbd-i2c: MSI TV@nywhere Plus detected at i2c-2/2-0030/ir0 [saa7133[0]]
[ 17.013295] saa7133[0]: registered device video0 [v4l2]
[ 17.013329] saa7133[0]: registered device vbi0
[ 17.013358] saa7133[0]: registered device radio0
[ 17.083334] saa7134 ALSA driver for DMA sound loaded
[ 17.083361] saa7133[0]/alsa: saa7133[0] at 0xf9fff800 irq 19 registered as card -2
[ 17.225467] lp0: using parport0 (interrupt-driven).
[ 17.331108] Adding 9767480k swap on /dev/sda1. Priority:-1 extents:1 across:9767480k
[ 17.870046] EXT4 FS on sda2, internal journal on sda2:8
[ 18.632759] EXT4-fs: barriers enabled
[ 18.643050] kjournald2 starting. Commit interval 5 seconds
[ 18.643294] EXT4 FS on sda3, internal journal on sda3:8
[ 18.643296] EXT4-fs: delayed allocation enabled
[ 18.643297] EXT4-fs: file extents enabled
[ 18.646622] EXT4-fs: mballoc enabled
[ 18.646626] EXT4-fs: mounted filesystem with ordered data mode.
[ 18.901111] type=1505 audit(1260961202.629:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2207
[ 18.944534] type=1505 audit(1260961202.669:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2211
[ 18.944666] type=1505 audit(1260961202.669:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2211
[ 18.944711] type=1505 audit(1260961202.669:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2211
[ 18.944755] type=1505 audit(1260961202.669:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2211
[ 19.070601] type=1505 audit(1260961202.797:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2216
[ 19.070785] type=1505 audit(1260961202.797:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2216
[ 19.098744] type=1505 audit(1260961202.825:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2220
[ 23.585303] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.585306] Bluetooth: BNEP filters: protocol multicast
[ 23.607105] Bridge firewalling registered
[ 28.272824] forcedeth 0000:00:09.0: irq 2298 for MSI/MSI-X
[ 28.273034] eth1: no link during initialization.
[ 28.273480] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 28.274779] forcedeth 0000:00:08.0: irq 2297 for MSI/MSI-X
[ 38.891066] eth0: no IPv6 routers present
[ 1151.100510] saa7134 ALSA driver for DMA sound unloaded
[ 1151.161716] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 1151.161768] saa7133[0]: found at 0000:01:00.0, rev: 209, irq: 19, latency: 64, mmio: 0xf9fff800
[ 1151.161774] saa7133[0]: subsystem: 1462:6231, board: MSI TV@Anywhere plus [card=82,autodetected]
[ 1151.162020] saa7133[0]: board init: gpio is 40
[ 1151.304079] tuner' 2-004b: chip found @ 0x96 (saa7133[0])
[ 1151.320074] input: MSI TV@nywhere Plus as /devices/virtual/input/input7
[ 1151.323498] ir-kbd-i2c: MSI TV@nywhere Plus detected at i2c-2/2-0030/ir0 [saa7133[0]]
[ 1151.369030] saa7133[0]: i2c eeprom 00: 62 14 31 62 10 28 ff ff ff ff ff ff ff ff ff ff
[ 1151.369039] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1151.369045] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1151.369052] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1151.369058] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1151.369064] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1151.369070] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1151.369077] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1151.369083] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1151.369089] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1151.369095] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1151.369101] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1151.369108] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1151.369114] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1151.369120] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1151.369126] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 1151.400018] saa7133[0]: i2c scan: found device @ 0x96 [???]
[ 1151.408012] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom]
[ 1151.508018] tda829x 2-004b: setting tuner address to 61
[ 1151.572015] tda829x 2-004b: type set to tda8290+75a
[ 1155.409995] saa7133[0]: registered device video0 [v4l2]
[ 1155.410017] saa7133[0]: registered device vbi0
[ 1155.410038] saa7133[0]: registered device radio0
[ 1155.524225] saa7134 ALSA driver for DMA sound loaded
[ 1155.524259] saa7133[0]/alsa: saa7133[0] at 0xf9fff800 irq 19 registered as card -2
موضوع: نصب کارت تی وی msi anywhere plus (دفعات بازدید: 2174 بار)
