آقا از wvdial هم استفاده کردم یعنی فقط نصبش کردم اما نمیتونم ازش استفاده کنم
با pppconfig فعلا وصل شدم اما اونم بگیر نگیر داره
با kppp هم که طبق معمول نمیره
اینم خروجی wvdail
--> WvDial: Internet dialer version 1.60
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Configuration does not specify a valid phone number.
--> Configuration does not specify a valid login name.
--> Configuration does not specify a valid password.
و خروجی wvdialconf
Scanning your serial ports for a modem.
Modem Port Scan<*1>: Scanning ttySHCF0 first, /dev/modem is a link to it.
ttySHCF0<*1>: ATQ0 V1 E1 -- OK
ttySHCF0<*1>: ATQ0 V1 E1 Z -- OK
ttySHCF0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttySHCF0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttySHCF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttySHCF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttySHCF0<*1>: Modem Identifier: ATI -- 56000
ttySHCF0<*1>: Speed 4800: AT -- OK
ttySHCF0<*1>: Speed 9600: AT -- OK
ttySHCF0<*1>: Speed 19200: AT -- OK
ttySHCF0<*1>: Speed 38400: AT -- OK
ttySHCF0<*1>: Speed 57600: AT -- OK
ttySHCF0<*1>: Speed 115200: AT -- OK
ttySHCF0<*1>: Speed 230400: AT -- OK
ttySHCF0<*1>: Speed 460800: AT -- OK
ttySHCF0<*1>: Max speed is 460800; that should be safe.
ttySHCF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3 SHCF1 SHCF2 SHCF3 SHCF4 SHCF5
Modem Port Scan<*1>: SHCF6 SHCF7
Found a modem on /dev/ttySHCF0, using link /dev/modem in config.
Modem configuration written to /etc/wvdial.conf.
ttySHCF0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
موضوع: مشكل در نصب مودم ديال آپ (حل شد) (دفعات بازدید: 10020 بار)
