نصب مودم و چند سوال

[ساسان]

سلام، سریع میرم سراغ مشکلم؛
من وقتی اوبونتو رو نصب کردم، مودمم رو میشناخت ولی هرکاری کردم مودم شماره نمیگیره! میخوام بدونم اگه اسم مودم تو قسمت Network باشه، کافیه؟

[سید مهدی]

خروجی دستورهای زیر رو برامون بزار اینجا:

کد: [انتخاب]

lspci |grep Modemو

کد: [انتخاب]

wvdialconf

[ساسان]

مهدی جان الان که اوبونتو رو Unistall کردم ولی الان میران با Live CDش و دستورات رو میزنم؛
سید برا اولی اینو داد:

کد: [انتخاب]

lspci |grep Modem:
05:00.0 Communication controller: Conexant HCF 56k Data/Fax/Voice/Spkp Modem (Worldwide) (rev 08)
و برای دومی:

کد: [انتخاب]

wvdialconf:
bash: lspci: command not found
ubuntu@ubuntu:~$ wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

WvModem<*1>: Cannot set information for serial port.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1   S2   S3   


Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <wvdial-list@lists.nit.ca>.
ubuntu@ubuntu:~$ lspci |grep Modem
05:00.0 Communication controller: Conexant HCF 56k Data/Fax/Voice/Spkp Modem (Worldwide) (rev 08)



[سید مهدی]

مودم شما از نوع conexant hcf هست. اگه از نوع conexant hsf بود که خیلی راحت بودین چون کمپانی DELL درایورش رو نوشته و مجانی ارائه داده. سخت افزار مودم شما را اوبونتو شناخته ولی نتونسته اون رو راه بندازه (درایو بکنه). من تو اینترنت یه سرچ کردم ولی روش نصب conexant hcf رو پیدا نکردم. لطفاً فایل های modemData.txt و Conexant.txt رو برامون بزارید اینجا (از برنامه scanModem استفاده کردین ؟ اگه کردین این فایل ها رو دارین اگه نکردین که باید:

دوست عزیز ابتدا به آدرس http://linmodems.technion.ac.il/Farsi/ یه سری بزن،
بعد ابزار ScanModem رو دانلود کن.
بعد اون رو تو دسکتاپت بریز و دستورات زیر رو اجرا کن:
کد:

کد: [انتخاب]

cd ~/Descktop
gunzip scanModem.gz
sudo chmod +x scanModem
sudo ./scanModem
ابزار فوق اطلاعات مفیدی درباره نوع مودم و درایور اون و چگونگی نصب و راه اندازیش میده!
اطلاعات رو در پوشه Modem میریزه.

[mtux]

جناب سید مهدی، درایور دل روی hcf هم نصب می‌شه!!!!

[سید مهدی]

جناب سید مهدی، درایور دل روی hcf هم نصب می‌شه!!!!

چه خوب !!! نمی دونستم ! رفتم تو سایت DELL و توضیحاتشون رو خوندم ولی ندیدم به hcf اشاره کنه، گفتم حتماً ساپورت نمی کنه !

[ساسان]

آقا من دیگه خسته شدم! ScanModem رو کپی کردم رو دسکتاپ، بعد کدی رو که داده بودید رو زدم تو Terminal، حالا میگه که این دیرکتوری که دادی اصلا وجود نداره! [احتمال داره به خاطر اینه که اوبونتو نصب نیست؟ و Live CD هست؟] بعد خودم این فایل فشرده ScanModem.gz رو Unzip کردم و فایل توش رو زدم تو ترمینال اجرا کنه و اونم اجرا شد ولی فولدر جدیدی ایجاد نکرد! [تورو خدا کمک کنید! ]

راستی من مودمم زولتریکس هست، این ماجرای مودم زولتریکس برای لینوکس چیه؟
راستی هر مودم اکسترنالی که با پورت سریال وصل میشه، بخرم، اوبونتو میشناسدش؟ قیمتشون چنده؟
با تشکر

[سید مهدی]

آقا من دیگه خسته شدم!

چرا زود خسته شدید ؟! خسته نباشید  اگه می خواهین لینوکس رو شروع کنید باید پی این خستگی ها رو به تنتون بمالید ! 

وقتی شما اون فایل رو از حالت فشرده خارج کردین، اون فایل scanmodem یک فایل اجرایی نیست. بلکه لازم هست که ابتدا خصلت اجرا شدن رو بهش بدید (توسط دستور chmod +x scanmodem) و بعد اون رو اجرا کنید تا اون فایل های خروجی رو براتون درست کنه.

می تونید خروجی اون دستور هایی که تو ترمینال زدید رو برامون بزارید اینجا ؟ (دقت کنید !!! فرض بر این هست که شما اون فایل scanmodem.gz را روی دسکتاپ گذاشته باشید. چون دستور ها بر اساس این فرض برای شما نوشته شده اند)

[ساسان]

من فایل داخل ScanModem.gz رو گزاشتم رو دسکتاپم و chmod +x scanmodem رو زدم تو ترمینال؛

کد: [انتخاب]

ubuntu@ubuntu:~$ chmod +x scanmodem
chmod: cannot access `scanmodem': No such file or directoryو این هم خروجی کد کلی وقتی ScanModem.gz رو دسکتاپه:

کد: [انتخاب]

ubuntu@ubuntu:~$ cd ~/Descktop
bash: cd: /home/ubuntu/Descktop: No such file or directory
ubuntu@ubuntu:~$ gunzip scanModem.gz
gunzip: scanModem.gz: No such file or directory
ubuntu@ubuntu:~$ sudo chmod +x scanModem
chmod: cannot access `scanModem': No such file or directory
ubuntu@ubuntu:~$ sudo ./scanModem
sudo: ./scanModem: command not found

[سید مهدی]

کد:

کد: [انتخاب]

ubuntu@ubuntu:~$ chmod +x scanmodem
chmod: cannot access `scanmodem': No such file or directory
لینوکس به حروف کوچک و بزرگ حساس هست و بین اونها فرق می زاره. باید از scanModem استفاده کنید نه scanmodem

کد:

کد: [انتخاب]

ubuntu@ubuntu:~$ cd ~/Descktop
bash: cd: /home/ubuntu/Descktop: No such file or directory
ubuntu@ubuntu:~$ gunzip scanModem.gz
gunzip: scanModem.gz: No such file or directory
ubuntu@ubuntu:~$ sudo chmod +x scanModem
chmod: cannot access `scanModem': No such file or directory
ubuntu@ubuntu:~$ sudo ./scanModem
sudo: ./scanModem: command not found

باید ببخشید اشتباه از من بود! داشتم سریع تایپ می کردم اشتباه تایپی کردم. باید بجای cd ~/Descktop از cd ~/Desktop استفاده کنید. یعنی اگه بخوام یکبار دیگه بگم میشه:

کد: [انتخاب]

cd ~/Desktop
gunzip scanModem.gz
sudo chmod +x scanModem
sudo ./scanModem
وقتی این کار رو کردین می بینید که یک فولدر به اسم Modem درست می کنه که توش کلی فایل هست. فایل ModemData.txt رو برامون بزارین اینجا

[ساسان]

سید گرفتم:

ModemData

کد: [انتخاب]

Only plain text email is forwarded by the  DISCUSS@linmodems.org List Server.
 Do use the following as the email Subject Line:
           SomeName, YourCountry  kernel 2.6.20-15-generic
 This will alert cogent experts, and  distinguish cases in the Archives.
 YourCountry will enable Country Code guidance.
 Occassionally responses are blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org .
 Local Linux experts can be found through: http://www.linux.org/groups/index.html
--------------------------  System information ----------------------------
CPU=i686, 
Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007
 scanModem update of:  2007_Oct_09


 There are no blacklisted modem drivers in /etc/modprobe*  files
USB modem not detected by lsusb


Advanced Linux Sound Architecture  (ALSA) spackage providing audio support
on your System, also includes drivers for some modems. For modems using the
snd-hda-intel  audio+modem driver, upgrades to a new ALSA version are sometimes
necessary to achieve function. See for example:
      http://linmodems.technion.ac.il/bigarch/archive-seventh/msg02144.html
Copying ALSA diagnostics to Modem/ALSAroot.tgz
ALSAversion = 1.0.13

Modem or candidate host audio card have firmware information and diagnostics:

 PCI slot PCI ID SubsystemID Name
 ---------- --------- --------- --------------
 05:00.0 14f1:1056 14f1:1056 Communication controller: Conexant HCF 56k Data/Fax/Voice/Spkp Modem

 Modem interrupt assignment and sharing:
 --- Bootup diagnostics for card in PCI slot 05:00.0 ----

 PCI slot PCI ID SubsystemID Name
 ---------- --------- --------- --------------
 00:1b.0 8086:284b 1458:a002 Audio device: Intel Corporation 82801H

 Modem interrupt assignment and sharing:
 21:       2719          0   IO-APIC-fasteoi   HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[  138.591391] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[  138.591406] PCI: Setting latency timer of device 0000:00:1b.0 to 64

 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===

  The High Defintion Audio card with PCI ID 8086:284b may host a soft modem chip.
Bootup diagnostics lack ALSA data.
 Modem not detected though HDA card diagnostics
 The NotDetermined is not supported by this kernel.
 For candidate modem in PCI bus:  00:1b.0
   Class 0403: 8086:284b Audio device: Intel Corporation 82801H
      Primary PCI_id  8086:284b
    Subsystem PCI_id  1458:a002
    Softmodem codec or Vendor from diagnostics:
                              from    Archives:
                       

 Lacking a dsp (digital signal processing) chip, the modem is a software
 intensive or "softmodem" type. Its primary controller manages the traffic
 with the CPU. But the software needed is specified in the Subsystem.
 -----------------------------------------
Support type needed or chipset:

Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.

2) An ALSA modem driver plus slmodemd.  Read Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.1.tar.gz from: 
http://linmodems.technion.ac.il/packages/smartlink/


Writing Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read Conexant.txt

 Read Conexant.txt

Writing Conexant.txt

Writing Smartlink.txt
============ end Smartlink section =====================

 For candidate modem in PCI bus:  05:00.0
   Class 0780: 14f1:1056 Communication controller: Conexant HCF 56k Data/Fax/Voice/Spkp Modem
      Primary PCI_id  14f1:1056
 Support type needed or chipset: hcflinmodem
 


For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read Conexant.txt

 Read Conexant.txt

Writing Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.2
             and the compiler used in kernel assembly: 4.1.2


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.1
   linuc_headers base folder /lib/modules/2.6.20-15-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu,  linux-libc-dev). The also required headers of package libc6 are commonly installed by default.



If a driver compilation files with message including some lack of some FileName.h (stdio.h for example.
Some additional kernel-header files need installation to /usr/include.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
$ sudo apt-get -s install linux-kernel-devel
While some of the files may be on the install CD, others may have to be found through http://packages.ubuntu.com

For Ubuntu Feisty, additional packages required were:
 libc6-dev linux-libc-dev
available through http://packages.ubuntu.com/ , if not on the install CD.
Such packages may have different names for other Linux distributions.
Try installing just the libc6-dev, then test the compile again.


Checking pppd properties:
-rwsr-xr-- 1 root dip 269224 2007-04-05 03:41 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth0:avah
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0: 
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

Conexant.txt

کد: [انتخاب]

Conexant chipset modems section 
 --------------------------------
 Vendors 14f1 is Conexant, inheritor of the former vendor 127a Rockwell modem technology.
There are also Conexant chipsets in some modems from vendors:
  158b Allied Data Tech.,
  1024 Zenith
  141a Apache Micro
  148d Digicom Systems.
Support types are:
hcflinmodem package - for older HCF chipset modems
hsfmodem package - for hsfmodem chipsets, including those hosted on some High Definition Audio (HDA) cards and some USB modems.

The 14f1:2f00 chipset has a free support package: http://ubuntuforums.org/showthread.php?t=180632

For owners of Dell computers there is a free package for HSF support requiring compiling. For details:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg01830.html
http://search.dell.com/results.aspx?s=gen&c=us&l=en&cs=&k=hsfmodem&cat=sup
The download for package hsfmodem_7.60.00.06oem_i386.deb is: http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R155004&SystemID=INSPIRONI6400/E1505&servicetag=&os=UBLN&osl=en&deviceid=8593&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=1&libid=20&fileid=206745

But the orginal source of the hsfmodem Linux code packages for
 Conexant chipset modems is  http://www.linuxant.com/drivers.
There are free test packages available there providing only a low 14K speed.
A software key must be purchased to enable full speed 56K service.
 The HCF chipset modems have a dsp
 (digital signal processing) chip,  while the HSF lack a  dsp and
 this function is performed by the CPU  under software direction.
 

For a crash issue with the 2.6.16 kernel, please make sure that your
kernel was not compiled with the CONFIG_4KSTACKS option is not set as
the HSF modem driver is known to requires more than 4K of stacks in a
few cases.  The are several alternate kernels supporting hsfmodem
available at http://www.linuxant.com.  Look for their Link/URL on the
page with your needed hsfmodem package.

 To get software, go to http://www.linuxant.com/drivers
-Find the HCF or HSF menu in the left part of the screen.
-Read README.
-Read INSTALLATION.
-Click DOWNLOAD.
-Accept conditions.
-Find text: "You can download HCF (or HSF) modem packages from the driver
            download page." and click there.
-Look for your distribution, your processor, and your kernel.
-Download the matching file.
-Read again and, if you do this under Windows, print the installation
 instructions matching the kind of driver file which you downloaded.
-Now just follow these instructions.

http://www.linuxant.com/drivers/hsf/downloads-patches.php has patches
    that may be necessary for recent kernels.

 A detailed software installation example is provided at:
   http://linmodems.technion.ac.il/archive-fourth/msg00350.html

 After loading of HSF drivers, there will be selective displayed by command:
 #  /sbin/lsmod | grep hsf
 with an output like:
-----------
Module                  Size  Used by    Tainted: P
hsfich                119116   0  (autoclean)
hsfserial              26388   0  (autoclean)
hsfengine            1126348   0  (autoclean) [hsfserial]
hsfosspec              35328   0  (autoclean) [hsfich hsfserial hsfengine]
---------
 plus many others not modem related.
 While drivers are pre-compiled for some Linux distributions,
 the installation of the HCF/HSF packages DOES in general require kernel-source/
 preparation, as described in Modem/DriverCompiling.txt.

 There is good support from Linuxant.com, but first gather data.
 In a terminal
 # su - root or prefix commands with sudo for Ubuntu related distributions.
    hsfconfig --dumpdiag
 If this command crashes your machine, please try instead:
    hsfconfig --dumpdiag --noprobe
 Send the hsfdiag.txt located in the folder /tmp/
 to MODEM.SUPPORT@linuxant.com

 There is a conflict between modules snd-intel8x0m and  hsfmc97ich.
 The snd-intel8x0m Must be loaded first or the system may hang upon hsfmc97ich insertion.
      http://linmodems.technion.ac.il/archive-fourth/msg03027.html

 http://www.lorenzobettini.it/linux/LinuxSonyVaioVGN-S5VP_B reports a
 problem and solution in stalling a key, after testing of the free low
 speed test package.

 From http://www.linuxant.com/drivers,
 get hsfmodem package(s) with 2.6.20_15_generic included in the filename.
 If such a package cannot be found, get the generic package,
 for which compiling drivers will be necessary.

 Copy the package to your Linux partition. Unpack with:
    unzip hsfmodem*.zip
 Under root/admin permission, install with package with
  sudo dpkg -i hsfmodem*.deb
 Should the modem hardware not be a Conexant type,
    the installation will ABORT with an informative message.

 Continue with any output instructions. Following a successfull installation,
 The modem should be detected during the root/admin command:
wvdialconf /etc/wvdial.conf
 Edit your personal information in with:
 $  sudo gedit /etc/wvdial.conf
 See details on dialout usage in Testing.txt

====== end Conexant section section =======
 
 Conexant chipset modems section 
 --------------------------------
 Vendors 14f1 is Conexant, inheritor of the former vendor 127a Rockwell modem technology.
There are also Conexant chipsets in some modems from vendors:
  158b Allied Data Tech.,
  1024 Zenith
  141a Apache Micro
  148d Digicom Systems.
Support types are:
hcflinmodem package - for older HCF chipset modems
hsfmodem package - for hsfmodem chipsets, including those hosted on some High Definition Audio (HDA) cards and some USB modems.

The 14f1:2f00 chipset has a free support package: http://ubuntuforums.org/showthread.php?t=180632

For owners of Dell computers there is a free package for HSF support requiring compiling. For details:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg01830.html
http://search.dell.com/results.aspx?s=gen&c=us&l=en&cs=&k=hsfmodem&cat=sup
The download for package hsfmodem_7.60.00.06oem_i386.deb is: http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R155004&SystemID=INSPIRONI6400/E1505&servicetag=&os=UBLN&osl=en&deviceid=8593&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=1&libid=20&fileid=206745

But the orginal source of the hsfmodem Linux code packages for
 Conexant chipset modems is  http://www.linuxant.com/drivers.
There are free test packages available there providing only a low 14K speed.
A software key must be purchased to enable full speed 56K service.
 The HCF chipset modems have a dsp
 (digital signal processing) chip,  while the HSF lack a  dsp and
 this function is performed by the CPU  under software direction.
 

For a crash issue with the 2.6.16 kernel, please make sure that your
kernel was not compiled with the CONFIG_4KSTACKS option is not set as
the HSF modem driver is known to requires more than 4K of stacks in a
few cases.  The are several alternate kernels supporting hsfmodem
available at http://www.linuxant.com.  Look for their Link/URL on the
page with your needed hsfmodem package.

 To get software, go to http://www.linuxant.com/drivers
-Find the HCF or HSF menu in the left part of the screen.
-Read README.
-Read INSTALLATION.
-Click DOWNLOAD.
-Accept conditions.
-Find text: "You can download HCF (or HSF) modem packages from the driver
            download page." and click there.
-Look for your distribution, your processor, and your kernel.
-Download the matching file.
-Read again and, if you do this under Windows, print the installation
 instructions matching the kind of driver file which you downloaded.
-Now just follow these instructions.

http://www.linuxant.com/drivers/hsf/downloads-patches.php has patches
    that may be necessary for recent kernels.

 A detailed software installation example is provided at:
   http://linmodems.technion.ac.il/archive-fourth/msg00350.html

 After loading of HSF drivers, there will be selective displayed by command:
 #  /sbin/lsmod | grep hsf
 with an output like:
-----------
Module                  Size  Used by    Tainted: P
hsfich                119116   0  (autoclean)
hsfserial              26388   0  (autoclean)
hsfengine            1126348   0  (autoclean) [hsfserial]
hsfosspec              35328   0  (autoclean) [hsfich hsfserial hsfengine]
---------
 plus many others not modem related.
 While drivers are pre-compiled for some Linux distributions,
 the installation of the HCF/HSF packages DOES in general require kernel-source/
 preparation, as described in Modem/DriverCompiling.txt.

 There is good support from Linuxant.com, but first gather data.
 In a terminal
 # su - root or prefix commands with sudo for Ubuntu related distributions.
    hsfconfig --dumpdiag
 If this command crashes your machine, please try instead:
    hsfconfig --dumpdiag --noprobe
 Send the hsfdiag.txt located in the folder /tmp/
 to MODEM.SUPPORT@linuxant.com

 There is a conflict between modules snd-intel8x0m and  hsfmc97ich.
 The snd-intel8x0m Must be loaded first or the system may hang upon hsfmc97ich insertion.
      http://linmodems.technion.ac.il/archive-fourth/msg03027.html

 http://www.lorenzobettini.it/linux/LinuxSonyVaioVGN-S5VP_B reports a
 problem and solution in stalling a key, after testing of the free low
 speed test package.

 From http://www.linuxant.com/drivers,
 get hsfmodem package(s) with 2.6.20_15_generic included in the filename.
 If such a package cannot be found, get the generic package,
 for which compiling drivers will be necessary.

 Copy the package to your Linux partition. Unpack with:
    unzip hsfmodem*.zip
 Under root/admin permission, install with package with
  sudo dpkg -i hsfmodem*.deb
 Should the modem hardware not be a Conexant type,
    the installation will ABORT with an informative message.

 Continue with any output instructions. Following a successfull installation,
 The modem should be detected during the root/admin command:
wvdialconf /etc/wvdial.conf
 Edit your personal information in with:
 $  sudo gedit /etc/wvdial.conf
 See details on dialout usage in Testing.txt

====== end Conexant section section =======


[سید مهدی]

از اینجا بسته را دانلود کنید و نصب کنید. بعد دستور زیر رو اجرا کنید:

کد: [انتخاب]

sudo wvdialconfو خروجی اش رو بزارین اینجا

[Taha]

آیا لینک درایوری که گذاشتین برای ابونتو 7.10 هم جواب میده

[Taha]

خوب، چه خوب پس جواب می ده من خودم نصبش نکردم


من اینجا ( http://linmodems.technion.ac.il/bigarch/archive-seventh/msg01830.html ) دیدم نوشته ی سری بسته که مربوط به headers و غیره هست باید نصب کنم منظورم قبل از نصب درایور آیا درسته؟

[arashOio]

خوب، چه خوب پس جواب می ده من خودم نصبش نکردم


من اینجا ( http://linmodems.technion.ac.il/bigarch/archive-seventh/msg01830.html ) دیدم نوشته ی سری بسته که مربوط به headers و غیره هست باید نصب کنم منظورم قبل از نصب درایور آیا درسته؟

مممم من فک میکنم این مربوط به نسخه قدیمش میشه الان شماره بسته هدر من 14-2.6.22 هست که فک کنم مربوط به کرنل جدید اوبونتو میشه تاریخ اون میلینگ لیست هم مال  29 Jul میشه خود dell که میگه کسایی که از ۷٫۰۴ به ۷٫۱۰ آپگرید کردن باست  linux-backports-modules رو پاک کنن چیز خاص دیگه‌ای که نگفته