مشکل با conexant در ubuntu 8.04 { حل شد بطور کامل}

[ddavod]

جواب نداد من خودم این کار رو کرده بودم تازه اینو نصب میکنید بدتر هم میشه

[سجاد]

خود سایته linuxaunt { مسول conexant در لینوکس } این طور نوشته منم امتحان کردم شد 

http://www.linuxant.com/drivers/hsf/full/downloads.php

یه "hardy" جستجو کنید تا خودتون ببینید

[arashOio]

منم امتحان کردم بعد از این کاری که سجاد جان گفتن مشکلم کامل حل شد (صدا+مودم دارم)

کد: [انتخاب]

arash@arash-laptop:~$  aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 6: Conexant HSF Modem [Conexant HSF Modem]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
arash@arash-laptop:~$ wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: Scanning ttySHSF0 first, /dev/modem is a link to it.
WvModem<*1>: Cannot set information for serial port.
ttySHSF0<*1>: ATQ0 V1 E1 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 Z -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttySHSF0<*1>: Modem Identifier: ATI -- 56000
ttySHSF0<*1>: Speed 4800: AT -- OK
ttySHSF0<*1>: Speed 9600: AT -- OK
ttySHSF0<*1>: Speed 19200: AT -- OK
ttySHSF0<*1>: Speed 38400: AT -- OK
ttySHSF0<*1>: Speed 57600: AT -- OK
ttySHSF0<*1>: Speed 115200: AT -- OK
ttySHSF0<*1>: Speed 230400: AT -- OK
ttySHSF0<*1>: Speed 460800: AT -- OK
ttySHSF0<*1>: Max speed is 460800; that should be safe.
ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Modem Port Scan<*1>: S1   S2   S3   SHSF1 SHSF2 SHSF3 SHSF4 SHSF5
Modem Port Scan<*1>: SHSF6 SHSF7

Found a modem on /dev/ttySHSF0, using link /dev/modem in config.
Modem configuration written to /etc/wvdial.conf.
/etc/wvdial.conf<Warn>: Can't write '/etc/wvdial.conf.tmp9093': Permission denied
/etc/wvdial.conf<Warn>: Can't write '/etc/wvdial.conf' ('/etc/wvdial.conf'): Bad file descriptor
ttySHSF0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
arash@arash-laptop:~$

[ddavod]

اگه امکان داره یه بار دقیق توضیح بدید که اول alsa رو نصب کنم یه اول درایور conexant رو بعد ای ریاستارت رو کی انجام بدم

[arashOio]

اگه امکان داره یه بار دقیق توضیح بدید که اول alsa رو نصب کنم یه اول درایور conexant رو بعد ای ریاستارت رو کی انجام بدم

اول alsa رو نصب میکنین (ممکنه یکم طول بکشه) بعد ریبوت میکنین حالا conexant رو نصب میکنین دوباره ریبوت میکنین

[ddavod]

دقیقا همین کار رو کردم موقع نصب alsa این پیغام میاد

 
Selecting previously deselected package alsa-driver-linuxant.
(Reading database ... 91492 files and directories currently installed.)
Unpacking alsa-driver-linuxant (from .../alsa-driver-linuxant_1.0.16.1-1_all.deb) ...
Setting up alsa-driver-linuxant (1.0.16.1-1) ...
Building kernel modules for the 2.6.24-16-generic kernel, please wait... done.
ERROR: Build failed. Please review the build log at /tmp/alsa-driver-linuxant.6342.log
dpkg: error processing alsa-driver-linuxant (--install):
 subprocess post-installation script returned error exit status 2
Errors were encountered while processing:
 alsa-driver-linuxant



موقع نصب conexant هم این پیغام میاد


(Reading database ... 93257 files and directories currently installed.)
Unpacking hsfmodem (from .../hsfmodem_7.68.00.09oem_i386.deb) ...
Removing old /etc/hsfmodem
Setting up hsfmodem (7.68.00.09oem) ...
Conexant HSF softmodem driver, version 7.68.00.09oem

If you need assistance or more information, please go to:
        http://www.linuxant.com/

When reporting a problem for the first time, please send
us the file generated by "hsfconfig --dumpdiag".


No pre-built modules for: Ubuntu-Kubuntu-8.04 linux-2.6.24-16-generic i686-SMP

Trying to automatically build the driver modules...
(this requires a C compiler and proper kernel sources to be installed)

WARNING: Building older built-in HDA driver; some audio/modem issues may occur.
If this is the case, please try the latest alsa-driver-linuxant package
available from http://www.linuxant.com/alsa-driver

Building modules for kernel 2.6.24-16-generic, using source directory
/lib/modules/2.6.24-16-generic/build. Please wait...
Warning: Module snd_hda_intel is in use
done.

Unable to determine region, defaulting to "USA"

Unable to unload driver to configure region; modem in use?
try configuring it manually with "AT+GCI=00B5"

Setting region for modem unit 0: "USA"

To change, use "hsfconfig --region" or "AT+GCI=<T35code>"
The current region can be displayed by entering "ATI9" in a terminal program.

Note: kernel module snd-via82xx-modem overridden by hsfmc97via
Note: kernel module snd-intel8x0m overridden by hsfmc97ich hsfmc97sis
Note: kernel module snd-atiixp-modem overridden by hsfmc97ati

Current parameters: ("hsfconfig --info")

Config for modem unit 0: /dev/ttySHSF0
        Device instance: 0-PCI-14f1:2f30-14f1:2051
        HW revision    : Basic2 2.18 Standard DAA 3VoltsIA
        HW profile name: hsfpcibasic2hsfi
        Current region : USA (T.35 code: 00B5)

The /dev/modem alias (symlink) points to ttySHSF0

[سجاد]

از نسخه ۶۴ بیتی استفاده میکنی ؟

دقیقا همین کار رو کردم موقع نصب alsa این پیغام میاد

 
Selecting previously deselected package alsa-driver-linuxant.
(Reading database ... 91492 files and directories currently installed.)
Unpacking alsa-driver-linuxant (from .../alsa-driver-linuxant_1.0.16.1-1_all.deb) ...
Setting up alsa-driver-linuxant (1.0.16.1-1) ...
Building kernel modules for the 2.6.24-16-generic kernel, please wait... done.
ERROR: Build failed. Please review the build log at /tmp/alsa-driver-linuxant.6342.log
dpkg: error processing alsa-driver-linuxant (--install):
 subprocess post-installation script returned error exit status 2
Errors were encountered while processing:
 alsa-driver-linuxant



موقع نصب conexant هم این پیغام میاد


(Reading database ... 93257 files and directories currently installed.)
Unpacking hsfmodem (from .../hsfmodem_7.68.00.09oem_i386.deb) ...
Removing old /etc/hsfmodem
Setting up hsfmodem (7.68.00.09oem) ...
Conexant HSF softmodem driver, version 7.68.00.09oem

If you need assistance or more information, please go to:
        http://www.linuxant.com/

When reporting a problem for the first time, please send
us the file generated by "hsfconfig --dumpdiag".


No pre-built modules for: Ubuntu-Kubuntu-8.04 linux-2.6.24-16-generic i686-SMP

Trying to automatically build the driver modules...
(this requires a C compiler and proper kernel sources to be installed)

WARNING: Building older built-in HDA driver; some audio/modem issues may occur.
If this is the case, please try the latest alsa-driver-linuxant package
available from http://www.linuxant.com/alsa-driver

Building modules for kernel 2.6.24-16-generic, using source directory
/lib/modules/2.6.24-16-generic/build. Please wait...
Warning: Module snd_hda_intel is in use
done.

Unable to determine region, defaulting to "USA"

Unable to unload driver to configure region; modem in use?
try configuring it manually with "AT+GCI=00B5"

Setting region for modem unit 0: "USA"

To change, use "hsfconfig --region" or "AT+GCI=<T35code>"
The current region can be displayed by entering "ATI9" in a terminal program.

Note: kernel module snd-via82xx-modem overridden by hsfmc97via
Note: kernel module snd-intel8x0m overridden by hsfmc97ich hsfmc97sis
Note: kernel module snd-atiixp-modem overridden by hsfmc97ati

Current parameters: ("hsfconfig --info")

Config for modem unit 0: /dev/ttySHSF0
        Device instance: 0-PCI-14f1:2f30-14f1:2051
        HW revision    : Basic2 2.18 Standard DAA 3VoltsIA
        HW profile name: hsfpcibasic2hsfi
        Current region : USA (T.35 code: 00B5)

The /dev/modem alias (symlink) points to ttySHSF0

[ddavod]

32 بیتیه

[masoudadm]

سلام من با تمام روش های موجود کار کردم ولی مشکلم حل نشد
اسم مودم من که موقع نصب در اکس پی نشان می ده اینه

conextant hdaudio softv92 data fax modem with smartcp

هرکس که بتونه مشکل منو حل کنه تا ابد دهر هرگز لطفشو فراموش نمی کنم .!!!

[Behnam Golds]

توی  لینوکس  چی   نشون  میده  ؟

کد: [انتخاب]

lspci |grep Modem
البته  خروجی   scanmodem   رو  اگر  بگذاری   بهتره...

[lordhp]

barayeh man kheyli jalebeh chon dafeye avval ba driver gutsy nasb kardam va dorost kar kard vali dafeye dovvom na hala moshkel az kojast?

[ddavod]

اقا راه حلی پیدا نشد که درست جواب بده

[masoudadm]

اون دستوری رو که گفتی وارد کردم ولی هیچ خروجی نداشت

[Behnam Golds]

خب   یکم  ساده ترش  کنیم  :

کد: [انتخاب]

lspci
از   scanmodem     چه  خبر؟

[ddavod]

برای من اینو داد

00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GT] (rev a1)
03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
05:00.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
05:00.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
05:01.0 Communication controller: Conexant HSF 56k Data/Fax Modem (rev 01)


مشکل من اینه که وقتی اولین بار هاردی رو نصب کنم و درایور مودم رو هم نصب میکنم هم صدا دارم هم اینترنتم قشنگ کار میکنه ولی بعد اینکه یه کام\یوتر رو ریسیت کنم صدا قطع میشه مودمم درست کار نمیکنه